UPSB v3
Tutorials Pending Approval / Pilot GPS-FRIXION mod
-
Date: Sun, Sep 28 2008 10:11:15
My old mod broke, so I made a new, better, modification of the Pilot BPS-GP
You will need:
Pilot BPS-GP x2
Pilot FRIXION x2
----Note: You really only need the caps.
Something Sharp (Craftknife'd be good for this)
Tape
Mod:
1. Take one of your Pilot BPS-GPs and remove the grip.
2. Cut the removed grip in half, horizontally.
3. Remove half of the grip on the other BPS-GP by cutting the lower half off of it.
----(By not removing the grip completely means the grip stays firm in its place for longer.)
4. Slide the grip taken off the first BPS-GP on to the end of the other BPS-GP.
5. Remove the cap of the first BPS-GP and place it on the end of the other BPS-GP.
6. Cut off the clips on both BPS-GP caps. This is so you can stack other caps on top.
7. Get your Pilot FRIXION caps and place them on top of the BPS-GP caps on either end.
On my original mod, the cap on the rare end of the pen kept coming off so I ended up taping
the clip on to the grip on both ends. Looks kinda tacky but it stops the caps from coming off. -
Date: Sun, Sep 28 2008 10:32:23
http://www.upsb.info/forum/index.php?showtopic=6572
Please read ALL of the link i provided. Model all future pen mod tutorials around the template provided in the link. Thanks.
EDIT:
Thread re-opened due to the new approval section. -
Date: Fri, Oct 3 2008 19:49:55
Could you at least add some pictures? Would like to see how it looks..