UPSB v3
Tutorials Pending Approval / Coulomb mod
Anyono Knows about it ?
-
Date: Wed, Oct 8 2008 08:56:59
I just read about it in some trade threads, does someone has pictures,is there a tutorial or anyone knows parts/how to make it ?
-
Date: Sat, Oct 11 2008 08:50:02
http://proxy.f3.ymdb.yahoofs.jp/bc/44d2e0b...cC.G8IBe.kAhumM
here is the picture from someone in JEB
but I still can't find the tut
but TEK already made it, maybe me or someone ask him? -
Date: Sat, Oct 11 2008 09:29:30
this mod is really really simple.
materials:
-plastic G3 (tip, body)
-hgg (tip and grip)
-1 Signo tip and grip
-1 Hi-tec tip
-hyper gel cap and grip
steps:
1- Nude out the g3 and shave off the nub and squares
2- cut half a cm of the signo grip and put it on the g3
3- cut about a .9 cm off the hyper gel grip and put it above the signo grip in stage 2
4- now get the plastic g3 tip and screw it on to the body
5- get he hgg grip and put it above the hyper gel grip in stage 3
6- stick the signo tip inside the hgg grip
7- then stick the hi-tec tip on top of the signo tip (note: G3 tip>signo>hi tec)
8- get the left over hyper gel grip in stage 3 and cut a .5 cm off from it
9- stick the hgg tip inside the hyper gel cap
10- then the hyper gel grip
11- then .5 cm of the left over signo tip in stage 2
12- then stick the .5 cm hyper gel in stage 8 in the cap
13- now put some electric tape around the end of the g3 body and put on the cap
14- then say woot tek is king bluheijiefje a;nnveia;rjei (note: this step is not necessary) -
Date: Sat, Oct 11 2008 09:57:16
Thx alot for tuto tek
-
Date: Sat, Oct 11 2008 10:23:33
lol @ TEK's post...seems easy to make hmm
-
Date: Sat, Oct 11 2008 11:09:28
thanks TEK
I'll do the 14th
lol
-
Date: Sat, Oct 11 2008 11:29:15
the picture posted is not working. tek can u post a picture?
-
Date: Sat, Oct 11 2008 12:18:09
He was posted it in show off your pens -
Date: Sat, Oct 11 2008 12:18:14
Thank for tut TEK
i'll make it when i got some hyperjell - -* -
Date: Sat, Oct 11 2008 12:25:09
That's so sexy. xDD
-
Date: Sat, Oct 11 2008 16:12:49
Looks nice, but it sounds like it's really front heavy to me. Signo and HiTec in the front, just an HGG tip in the back? Iunno, seems front heavy to me. . =\
-
Date: Sat, Oct 11 2008 21:20:41
woot tek is king bluheijiefje a;nnveia;rjei
-
Date: Sat, Oct 11 2008 21:35:16
i want this pen so badly
id make one if i had the materials...
id make a lime/green one -
Date: Sat, Oct 11 2008 21:44:45
I want some more G3s once i get some i am so making one of these. Looks great TEK. -
Date: Sat, Oct 11 2008 22:59:46QUOTE (Sankaku @ Oct 11 2008, 12:12 PM) <{POST_SNAPBACK}>Looks nice, but it sounds like it's really front heavy to me. Signo and HiTec in the front, just an HGG tip in the back? Iunno, seems front heavy to me. . =\
you can think of it as...
signo in the front balances the whole hyper gel in the back
and the hi tec balances the hgg tip in the back (hi tec tips aren't heavy at all)
and then the hgg grip and other grips balances the hyper gel grip and tape in the back.
its pretty balanced. -
Date: Sun, Oct 12 2008 13:13:23
just made it and imo the Key3 mod is the better choice for me.
-
Date: Sun, Oct 12 2008 13:16:11
Whats the length of this pen?
-
Date: Fri, Oct 17 2008 01:19:47
whoaaa. xD How long did it take you to make that TEK??
-
Date: Fri, Oct 17 2008 03:21:37
how does it spin?
-
Date: Fri, Oct 17 2008 06:43:37
Just thought I might add another way of making this mod if you have a metal G3 tip instead of a plastic G3 tip
PLEASE NOTE: This way will add more weight to both ends of the mod, but not by much
Follow all of TEK's wonderful steps
Now instead of (in the front of the pen) G3 plastic > Signo > Hi-Tec, you will go G3 Metal > random signo/G3 sized plastic tip > Signo
Now to balance out the back
Instead of putting in a HGG tip, you put the Hi-Tec tip you have in the back. NOTE: to reduce rattling of the Hi-Tec tip, wrap tape around it until it fits snuggly in the back of the Hypergel cap
Since metal G3 tips are more common than plastic G3 tips, i thought i like to share the way I made it. (Balanced perfectly and you save a HGG tip ^^)
Again credits go to TEK for the awesome tutorial! -
Date: Sat, Oct 18 2008 00:00:03QUOTE (CaliMartinio @ Oct 16 2008, 11:43 PM) <{POST_SNAPBACK}>Just thought I might add another way of making this mod if you have a metal G3 tip instead of a plastic G3 tip
PLEASE NOTE: This way will add more weight to both ends of the mod, but not by much
Follow all of TEK's wonderful steps
Now instead of (in the front of the pen) G3 plastic > Signo > Hi-Tec, you will go G3 Metal > random signo/G3 sized plastic tip > Signo
Now to balance out the back
Instead of putting in a HGG tip, you put the Hi-Tec tip you have in the back. NOTE: to reduce rattling of the Hi-Tec tip, wrap tape around it until it fits snuggly in the back of the Hypergel cap
Since metal G3 tips are more common than plastic G3 tips, i thought i like to share the way I made it. (Balanced perfectly and you save a HGG tip ^^)
Again credits go to TEK for the awesome tutorial!
And this spins surprisingly well. I liked it
-
Date: Tue, Oct 21 2008 15:09:37
oh this is nice i going to make one with metal g3 tip and i and saved up on a hgg tip
-
Date: Tue, Oct 21 2008 15:35:10
what is it worth when you live in japan
-
Date: Tue, Oct 21 2008 22:49:55
can someone tell me or give me a link to what a Hi-Tec pen and tip is? i want to order the parts for it. It'll be nice too if someone could give me a link to a online penstore that sells different color Hyper jell other than black, red and blue from penwish.
-
Date: Tue, Oct 21 2008 23:14:29
Hi-Tecs are sold on penwish.
Edit: Heres the link: http://penwish.com/product_info.php?products_id=14 -
Date: Tue, Oct 21 2008 23:19:30QUOTE (iamk34n3 @ Oct 21 2008, 06:14 PM) <{POST_SNAPBACK}>Hi-Tecs are sold on penwish.
Edit: Heres the link: http://penwish.com/product_info.php?products_id=14
Thnx man, all i need is some hyper jell....i dont like the colors they sell at penwish -
Date: Wed, Oct 22 2008 03:09:07QUOTEThnx man, all i need is some hyper jell....i dont like the colors they sell at penwish
start trading(:
Jimnies can also be used just fyi(: -
Date: Wed, Oct 22 2008 03:21:35
hey here&now u been modding a lot? including this pen?
-
Date: Wed, Oct 22 2008 03:26:04
this pen?
not yet.
i will have to wait till my plastic G3s arrive(: XD
yes i do mod quite a bit(: -
Date: Wed, Oct 22 2008 23:48:23QUOTE (CaliMartinio @ Oct 17 2008, 02:43 AM) <{POST_SNAPBACK}>Just thought I might add another way of making this mod if you have a metal G3 tip instead of a plastic G3 tip
PLEASE NOTE: This way will add more weight to both ends of the mod, but not by much
Follow all of TEK's wonderful steps
Now instead of (in the front of the pen) G3 plastic > Signo > Hi-Tec, you will go G3 Metal > random signo/G3 sized plastic tip > Signo
Now to balance out the back
Instead of putting in a HGG tip, you put the Hi-Tec tip you have in the back. NOTE: to reduce rattling of the Hi-Tec tip, wrap tape around it until it fits snuggly in the back of the Hypergel cap
Since metal G3 tips are more common than plastic G3 tips, i thought i like to share the way I made it. (Balanced perfectly and you save a HGG tip ^^)
Again credits go to TEK for the awesome tutorial!
Just made one using this alternative
really good -
Date: Thu, Oct 23 2008 02:07:21
length and weight of this mod?
-
Date: Sun, Nov 2 2008 23:32:23QUOTElength and weight of this mod?
length of this mod?
it's really beautiful... hope once I will order details from penwish and will make one... -
Date: Sun, Dec 7 2008 19:59:25
This may be late, but the hyperjell can be subbed with an hgg in the back. And if you dont have a plastic g3 use a metal one with an hgg tip and hgr tip over. hgr weighs about the same as hi-tec c. its going to be heavier but its perfectly balanced.
-
Date: Wed, Dec 10 2008 00:17:30
So today I spun the original version and I have to say its not that good. Martin's version is actually better.
-
Date: Thu, Dec 18 2008 13:08:52
what can i use as a sub for the hyper jell ASIDE from a jimnie? is there even any?
-
Date: Mon, Feb 9 2009 13:08:59
if hi-tecs balance hgg, can i swap them both for signos ? btw, this mod looks very simple and clean
-
Date: Tue, Feb 10 2009 14:00:12
woot tek is king bluheijiefje a;nnveia;rjei
-
Date: Tue, Feb 10 2009 16:00:24
I'm planning on making one, can anyone tell me how well does it spin and if it's worth making?
-
Date: Wed, Feb 11 2009 02:00:57QUOTE (Asterisk* @ Feb 10 2009, 08:00 AM) <{POST_SNAPBACK}>I'm planning on making one, can anyone tell me how well does it spin and if it's worth making?
Yep, it's a nice mod. It's one of the lighter of the Japanese G3 mods.
It's a bit front end heavy, but you can easily balance it out. Aside from that, the mod kind of reminds me of an MX, but slightly heavier.
Still, I think it's a nice mod, and is worth making.
Hope this helped!
-
Date: Wed, Feb 25 2009 13:40:44
I made one just now. And it doesn't seem anything like it. =(
-
Date: Wed, Feb 25 2009 13:45:16
for me coulomb mod is only nice for it's looks but really bad for spinning
-
Date: Wed, Mar 11 2009 22:34:32
anyone have the cool insert and insert length?
i need ane in pink ty! -
Date: Sun, Mar 29 2009 14:18:20QUOTE (Clyde Cazeñas @ Oct 11 2008, 06:23 PM) <{POST_SNAPBACK}>lol @ TEK's post...seems easy to make hmm
I agree hahahah -
Date: Thu, Apr 9 2009 06:45:06
Just to clarify things...
Is the Signo that's used Signo Broad?
And is this mod COP=COG?
-
Date: Thu, Apr 9 2009 06:46:16QUOTE (Chobi @ Apr 8 2009, 11:45 PM) <{POST_SNAPBACK}>Just to clarify things...
Is the Signo that's used Signo Broad?
And is this mod COP=COG?
The only part of the Signo you need is the tip, and part of the grip, so yes, broad would work best.
Yes, |COP=COG -
Date: Thu, Apr 16 2009 09:15:01
sorry to bump this post, but I want to ask
1. What is Electric tape and can I just use tape instead
2. Can I use a supergrip plastic tip for Calimartino's version?
Thanx! -
Date: Wed, May 6 2009 03:13:22
great mod ty just made one today and it spins great
-
Date: Wed, May 6 2009 03:20:28QUOTE (Shrouded Figure @ Apr 16 2009, 02:15 AM) <{POST_SNAPBACK}>sorry to bump this post, but I want to ask
1. What is Electric tape and can I just use tape instead
2. Can I use a supergrip plastic tip for Calimartino's version?
Thanx!
1. electric tape is black tape u use for wires
2. i have supergrips and G2 tips and theyre almost the same so yeah u can use themQUOTE (SJ. @ Oct 11 2008, 02:35 PM) <{POST_SNAPBACK}>i want this pen so badly
id make one if i had the materials...
id make a lime/green one
ahah same here (if only i can get parts)
edit: deleted some "yeahs" cuz sounded too weird -
Date: Wed, May 6 2009 12:55:54
I think it spins well.
Why is this still pending approval? -
Date: Mon, Jun 1 2009 13:14:05
i want this mod haha
is it heavy?
compare to ayatori? -
Date: Tue, Jun 2 2009 04:24:19QUOTE (marcelc @ Jun 1 2009, 09:14 PM) <{POST_SNAPBACK}>i want this mod haha
is it heavy?
compare to ayatori?
It's lighter than ayatori... because if u think about it... there's only a HGG tip in the back + grips to balance out the front... whereas in ayatori there is a signo tip, which is about 3 times as heavy as a HGG tip, as well as the hyperjell grip to balance out the front
However, the G3 body is quite nice to spin with ^^ but it's been heavily abused in many mods today... The body is nicer than the lakubo body in ayatori in my opinion... -
Date: Tue, Jun 9 2009 11:37:45
Y is it called a coulomb mod?
and where can i get the insert? -
Date: Mon, Oct 19 2009 20:51:12QUOTE (TEK @ Oct 11 2008, 04:29 AM) <{POST_SNAPBACK}>this mod is really really simple.
materials:
-plastic G3 (tip, body)
-hgg (tip and grip)
-1 Signo tip and grip
-1 Hi-tec tip
-hyper gel cap and grip
steps:
1- Nude out the g3 and shave off the nub and squares
2- cut half a cm of the signo grip and put it on the g3
3- cut about a .9 cm off the hyper gel grip and put it above the signo grip in stage 2
4- now get the plastic g3 tip and screw it on to the body
5- get he hgg grip and put it above the hyper gel grip in stage 3
6- stick the signo tip inside the hgg grip
7- then stick the hi-tec tip on top of the signo tip (note: G3 tip>signo>hi tec)
8- get the left over hyper gel grip in stage 3 and cut a .5 cm off from it
9- stick the hgg tip inside the hyper gel cap
10- then the hyper gel grip
11- then .5 cm of the left over signo tip in stage 2
12- then stick the .5 cm hyper gel in stage 8 in the cap
13- now put some electric tape around the end of the g3 body and put on the cap
14- then say woot tek is king bluheijiefje a;nnveia;rjei (note: this step is not necessary)
Weight?
Is it balanced?
I think that step 14 is completely necessary.
-
Date: Sat, Nov 28 2009 04:33:10
i think you should look down
-
Date: Sat, Nov 28 2009 05:28:42
Wouldn't this be terribly front heavy?
I mean, If hi tec c is heavier than hgg, than I would think it would be front heavy, as key3 is front heavy.
Still a cool mod tho...
EDIT: just made this, it's front heavy, but I still like it a lot... Good momentum, the balance is pretty barable. Mine is so sexy. I love it. -
Date: Sat, Nov 28 2009 06:21:43
Yea its way too front heavy. Replace the HGG at the back to a Signo and it is just right.
key3's isn't too front heavy though... Its just right for me. -
Date: Fri, Apr 9 2010 22:44:25QUOTE (TEK @ Oct 11 2008, 04:29 AM) <{POST_SNAPBACK}>this mod is really really simple.
materials:
-plastic G3 (tip, body)
-hgg (tip and grip)
-1 Signo tip and grip
-1 Hi-tec tip
-hyper gel cap and grip
steps:
1- Nude out the g3 and shave off the nub and squares
2- cut half a cm of the signo grip and put it on the g3
3- cut about a .9 cm off the hyper gel grip and put it above the signo grip in stage 2
4- now get the plastic g3 tip and screw it on to the body
5- get he hgg grip and put it above the hyper gel grip in stage 3
6- stick the signo tip inside the hgg grip
7- then stick the hi-tec tip on top of the signo tip (note: G3 tip>signo>hi tec)
8- get the left over hyper gel grip in stage 3 and cut a .5 cm off from it
9- stick the hgg tip inside the hyper gel cap
10- then the hyper gel grip
11- then .5 cm of the left over signo tip in stage 2
12- then stick the .5 cm hyper gel in stage 8 in the cap
13- now put some electric tape around the end of the g3 body and put on the cap
14- then say woot tek is king bluheijiefje a;nnveia;rjei (note: this step is not necessary)
LOL he said NUDE -
Date: Fri, Apr 9 2010 23:36:19QUOTE (Cream @ Apr 9 2010, 05:44 PM) <{POST_SNAPBACK}>LOL he said NUDE
you're mature! -
Date: Sat, Apr 10 2010 04:52:04QUOTE (Yosky @ Nov 27 2009, 11:21 PM) <{POST_SNAPBACK}>Yea its way too front heavy. Replace the HGG at the back to a Signo and it is just right.
key3's isn't too front heavy though... Its just right for me.
The one i got from Outlander was cog=cop
anyways, he like, took an rsvp grip and stuck it through the shredder or something, and stuffed it inside a g3 grip, which he cut.
so its like..
hyperjell outside (yellow black yellow)
inside of that:
g3 grip
inside of THAT:
rsvp grip.
:3 -
Date: Fri, Apr 16 2010 20:29:30QUOTE (Colin @ Apr 9 2010, 11:52 PM) <{POST_SNAPBACK}>The one i got from Outlander was cog=cop
anyways, he like, took an rsvp grip and stuck it through the shredder or something, and stuffed it inside a g3 grip, which he cut.
so its like..
hyperjell outside (yellow black yellow)
inside of that:
g3 grip
inside of THAT:
rsvp grip.
:3
lolwut