UPSB v3

Approved Tutorials / dRz's RSVP Mod Tutorial

Name for the mod is currently pending...

  1. dRz
    Date: Thu, Oct 16 2008 02:48:23

    Before we begin, these are some of the specifications:

    COG=COP
    Length: 21 1/2 cm
    Momentum is similar to a Firefly
    Weight is a little less than a KT.





    What you will need:

    Pens:


    -1 Sailor Gel Cap
    -3 Signo tips
    -1 Impact RT Grip(IRT)
    -1 Clear G2
    -1 RSVP (Clear and black grip is recommened)
    -1 Dr.Grip Grip
    Some Grips


    Tools:
    - X Acto Knife
    - Cutting Tool
    - Sandpaper
    - Tape


    Tutorial:

    First off, take the Sailor cap and take of the clip and cut where the red line is shown:


    Put a Signo in the Sailor cap.


    Take the IRT grip and cut it 3cm
    Now stick the RSVP grip inside the IRT (blue used to show the grip)


    Wrap a insert around the IRT grip and stick in the sailor cap


    Take the G2 and cut it where the red line is:


    Sand down the front of the RSVP so you can put the G2 barrel on it and a insert:


    Tape the 2 Signos to the top of the G2 barrel.
    Put enough grips to balance it out.
    And your done!




    Oh and this pen was made for MY hand size.
    So please don't say anything about it's length.

  2. TRoc
    Date: Thu, Oct 16 2008 02:55:23

    Hmm I like it. It's like a more modified MMT. Do you put 2 signos in the front to balance it out?

    Edit: Nevermind about the Signo tips

  3. dRz
    Date: Thu, Oct 16 2008 02:56:36

    QUOTE (TRoc @ Oct 15 2008, 10:55 PM) <{POST_SNAPBACK}>
    Hmm I like it. It's like a more modified MMT. Do you put 2 signos in the front to balance it out?

    Yes, I edited that into the tutorial.

  4. Shadowserpant
    Date: Thu, Oct 16 2008 03:01:17

    looks nice to me, because it doesnt have the rsvp cap's annoying stub
    ...i've never seen a sailor cap used before
    is it just me?

  5. CaliMartinio
    Date: Thu, Oct 16 2008 03:04:22

    Good tutorial
    Good pen modification
    clap.gif

    I seem to have noticed that your grips in the front of the mod final product picture is a little bit off
    Also, is it necessary to cut off the top of the sailor gel cap?

    EDIT:

    QUOTE (Shadowserpant @ Oct 15 2008, 08:01 PM) <{POST_SNAPBACK}>
    ...i've never seen a sailor cap used before
    is it just me?


    It's used in iMatt's SocomGel mod :](i think that's what it was called)

  6. dRz
    Date: Thu, Oct 16 2008 03:06:04

    QUOTE (CaliMartinio @ Oct 15 2008, 10:04 PM) <{POST_SNAPBACK}>
    Good tutorial
    Good pen modification
    clap.gif

    I seem to have noticed that your grips in the front of the mod final product picture is a little bit off
    Also, is it necessary to cut off the top of the sailor gel cap?

    Ya I know, I didn't push them all the way.
    If you don't want a nub on your sailor cap.
    Then yes.

  7. Mike
    Date: Thu, Oct 16 2008 03:17:56

    Is there any other way of attaching the tips to the ends besides tape?

  8. dRz
    Date: Thu, Oct 16 2008 03:19:09

    QUOTE (Mike @ Oct 15 2008, 10:17 PM) <{POST_SNAPBACK}>
    Is there any other way of attaching the tips to the ends besides tape?

    I find tape works the best.
    But, you might be able to super glue the 2 tips together then hot glue the tips to the G2 barrel.

  9. Unii
    Date: Sat, Nov 1 2008 19:51:33

    Spins very well.
    Didnt read the whole thing, so i didnt put the RSVP grip in the IRT grip xD

    it felt unbalanced so i put dr grip on the sailor cap.
    i like that idea better.

    also doesnt seem long at all, but i used a Lantu Barrel.


    Great Tut
    :]