UPSB v3

Tutorials Pending Approval / Gavin's G2 mod

Cheap-ish

  1. Gavin
    Date: Sat, Nov 8 2008 00:10:34

    My G2 Mod, its looks awesome imo. Good thing about it is that it uses mostly spare parts.
    COP=COG
    Weight=About a Comssa
    Length=18cm

    Okay... Here's what you need.
    1 Bic Round Stic Grip (Everything but cap)
    2 G2 barrels (clips removed)
    1 UniBall Signo (Tip)
    2 Papermate Profile (Sping+Spare Grips)
    1 RSVP (Cap+Inktube)



    You will also need these pieces from the G2s



    _______________________________________________________________________

    Step 1. Cut 2cm off the Bic barrel. I used a normal Bic Round Stic because I lost the clear barrel.
    http://i299.photobucket.com/albums/mm318/c...345/Photo42.jpg

    Now cut 1cm off the Bic Round Stic Grip Holder
    http://i299.photobucket.com/albums/mm318/c...345/Photo43.jpg

    Sand it down.
    http://i299.photobucket.com/albums/mm318/c...345/Photo44.jpg

    Twist in the Profile Spring
    http://i299.photobucket.com/albums/mm318/c...345/Photo45.jpg

    Put a Signo Tip on half and the other half in the back of the G2 Barrel. Use Telflon Tape if needed. (See Both Pics)
    http://i299.photobucket.com/albums/mm318/c...345/Photo46.jpg
    http://i299.photobucket.com/albums/mm318/c...345/Photo47.jpg

    Cut RSVP Tip to make it 13.9cm and crimp it at 3.5cm from the tip.
    http://i299.photobucket.com/albums/mm318/c...345/Photo51.jpg

    Assemble in This order

    G2 Barrel with Tip>Bic Barrel Portion>RSVP ink>G2 Backpart>G2 Backpart>G2 Clicker>Empty G2 Barrel.
    http://i299.photobucket.com/albums/mm318/c...345/Photo53.jpg

    Add a cut RSVP cap over the G2 Clicker, it will clip right on. Cut it like this.
    http://s299.photobucket.com/albums/mm318/c...ent=Photo56.jpg

    Outsert And Grips


    Outsert by TEK.



    Done. Questions?

    Q:How do you get the profile spring in the Bic Round Stic Grip part?
    A:Keep twisting it clockwise, if it still doesn't work shove pliars in and open it to stretch it a little, then try again.

  2. IAmTheMrGuy
    Date: Sat, Nov 8 2008 00:12:42

    i like it, cheap, easy to make, and cool looking

    good job biggrin.gif

  3. Gavin
    Date: Sat, Nov 8 2008 00:26:54

    QUOTE (IAmTheMrGuy @ Nov 7 2008, 07:12 PM) <{POST_SNAPBACK}>
    i like it, cheap, easy to make, and cool looking

    good job biggrin.gif


    Thanks! cool.gif

  4. Tpl
    Date: Sat, Nov 8 2008 00:42:55

    Looks very nice! Could you tell me the length?

    I might have to make one soon, a quick run to Publix and I will have myself some round stic grips

  5. TRoc
    Date: Sat, Nov 8 2008 00:43:13

    Hmm wow. Easy to find parts, efficient, great mod!:clap:

    O and how long is it?

  6. Gavin
    Date: Sat, Nov 8 2008 00:46:42

    QUOTE (Tpl @ Nov 7 2008, 07:42 PM) <{POST_SNAPBACK}>
    Looks very nice! Could you tell me the length?

    I might have to make one soon, a quick run to Publix and I will have myself some round stic grips


    18cm Sorry, forgot about that. Added to the Original post.

  7. FrozenIce
    Date: Sat, Nov 8 2008 01:09:43

    Very nice, simple looking mod.

    I might make one.

    Great job! clap.gif

  8. Gavin
    Date: Sat, Nov 8 2008 01:52:36

    Do'h, just fix some errors on the tutorial.

    There is an RSVP CX cap over the G2 clicker, it clicks right on.

  9. Adam_ADD
    Date: Sat, Nov 8 2008 02:42:50

    rsvp cx cap sounds confusing put cut rsvp cap instead and a picture of the cut cap

  10. Gavin
    Date: Sat, Nov 8 2008 03:03:49

    QUOTE (Adam_ADD @ Nov 7 2008, 09:42 PM) <{POST_SNAPBACK}>
    rsvp cx cap sounds confusing put cut rsvp cap instead and a picture of the cut cap


    Yeah, agreed. Done.

  11. yoonkwun
    Date: Sat, Nov 8 2008 05:36:52

    How do you get the Profile spring to go in the Bic Stic Grip Holder thing.. it won't go in

  12. Gavin
    Date: Sat, Nov 8 2008 05:54:07

    QUOTE (yoonkwun @ Nov 8 2008, 12:36 AM) <{POST_SNAPBACK}>
    How do you get the Profile spring to go in the Bic Stic Grip Holder thing.. it won't go in


    Keep twisting it. clockwise. If it doesn't work try stretching it with pliers.

  13. yoonkwun
    Date: Sat, Nov 8 2008 06:01:12

    and how do you attach the 2 barrels, is it tape?

  14. Gavin
    Date: Sat, Nov 8 2008 06:52:19

    QUOTE (yoonkwun @ Nov 8 2008, 01:01 AM) <{POST_SNAPBACK}>
    and how do you attach the 2 barrels, is it tape?


    No the Bic Round Stic, or Bic Round Stic Grip barrel should fit Snug. (From Step 1)

  15. xchuboi
    Date: Sun, Nov 23 2008 01:13:23

    can u use a HGG tip for this mod?

  16. Gavin
    Date: Wed, Nov 26 2008 22:08:11

    QUOTE (xchuboi @ Nov 22 2008, 08:13 PM) <{POST_SNAPBACK}>
    can u use a HGG tip for this mod?


    If its easier for you, yes. Put the tip on like an R-Stic.

  17. blindwhatif
    Date: Sun, Nov 30 2008 04:27:50

    wow this looks awesome =)
    great job happy.gif clap.gif

  18. Ragnorok
    Date: Sun, Dec 14 2008 00:33:02

    brilliants

  19. L
    Date: Sun, Dec 14 2008 01:38:33

    Pretty solid mod, good use of "easy to find" pens and clean look. Nice job!

  20. dYsfunKtional
    Date: Mon, Dec 29 2008 06:20:39

    Awesome mod! it's pretty customizable which I like personally, and the parts are really easy to find. xD

  21. Josh_man
    Date: Tue, Jan 13 2009 00:59:06

    im making this in a few days, ill post a pic to see what you think :]

  22. Gavin
    Date: Thu, Jan 15 2009 03:10:30

    QUOTE (Josh_man @ Jan 12 2009, 07:59 PM) <{POST_SNAPBACK}>
    im making this in a few days, ill post a pic to see what you think :]


    Great! Send me a pm when you do.