UPSB v3

Approved Tutorials / Buster CYL

By: spinnerpeem

  1. TEK
    Date: Tue, Nov 11 2008 01:33:15

    Mod by Spinnerpeem
    -COG = COP
    -weight is about 20grams (kt is 16g)
    -21~22 cm
    -double capped mod
    -approximately 10 dollars for materials

    Materials
    -2 airfit
    -2 comssa caps
    -1 dong-a back plug
    -1 crayola super tip



    thanks nateiskewl for the super tips ^^

  2. Fripâ„¢
    Date: Tue, Nov 11 2008 01:54:12

    Wow. What a stick- no the almost ultimate stick.

  3. Baaron
    Date: Tue, Nov 11 2008 01:58:18

    The tutorial on FPSB is pretty self-explanitory. I dont really think a video tutorial was that necessary :/

  4. TRoc
    Date: Tue, Nov 11 2008 01:59:54

    When I tried to mod with my supertip, the back plug would not come off and yours came off so easily. I ended up damaging the barrel.

  5. Shadowserpant
    Date: Tue, Nov 11 2008 02:01:11

    yeah that's exactly what happened to me when i made the ST, i absolutely couldnt get the backplug out, it ended up breaking

  6. PenCell
    Date: Tue, Nov 11 2008 02:06:16

    I had to freaking use a drill to get the backcap out. Howd you do it so easily?

  7. TEK
    Date: Tue, Nov 11 2008 02:28:37

    QUOTE (Baaron @ Nov 10 2008, 08:58 PM) <{POST_SNAPBACK}>
    The tutorial on FPSB is pretty self-explanitory. I dont really think a video tutorial was that necessary :/

    spinnerpeem asked me to make a tutorial on upsb
    his is how i make tutorials...

    QUOTE (PenCell @ Nov 10 2008, 09:06 PM) <{POST_SNAPBACK}>
    I had to freaking use a drill to get the backcap out. Howd you do it so easily?


    lol same way i did it in the video...just grab it with piers tightly and pull it out

  8. TheSpinner 3.5
    Date: Tue, Nov 11 2008 02:47:25

    awesome tutorial, I really like them

    simple and easy to do, i'll make when I get the parts

  9. MikeKe
    Date: Tue, Nov 11 2008 03:09:42

    Ahah, nice tutorial biggrin.gif
    One question, how much do airfits cost? and where do they sell them? xD

  10. TEK
    Date: Tue, Nov 11 2008 03:13:14

    QUOTE (MikeKe @ Nov 10 2008, 10:09 PM) <{POST_SNAPBACK}>
    Ahah, nice tutorial biggrin.gif
    One question, how much do airfits cost? and where do they sell them? xD


    i can get them at my school.
    but i dont think anywhere else...try to search for them in college book stores if u have any around ur place.
    they are about 4.50

  11. Glamouraz
    Date: Tue, Nov 11 2008 03:48:26

    Finally the tutorial's out!

  12. Guitrum
    Date: Tue, Nov 11 2008 03:54:48

    the best way to get the supertip backplug out is to take a large screw and screw it inside the backplug tightly, then grab the other end of the screw and pull! comes right out and then just screw off the back cap and ur done smile.gif works every time for me

  13. luke
    Date: Tue, Nov 11 2008 20:49:45

    seems airfits are pretty heavy. do they make good dr grip subs for bonkura kt?

  14. PenCell
    Date: Wed, Nov 12 2008 02:03:42

    Hm i used a new supertip and this time the tip came out super easy. dry.gif

  15. Mr.Squekers
    Date: Wed, Nov 12 2008 23:18:26

    Thanks TEK, also the Airfits can be found on JetPens. biggrin.gif (Thank god.) I was gonna make the tutorial! D:

  16. Kam
    Date: Fri, Nov 14 2008 08:04:17



    Errr...I made mine before this tutorial, and I cut my finger trying to use a knife to get the back plug of the super tip out. After that, I learned my lesson.

    Tek's method is pretty safe, but if you want to keep the back plug intact (you never know if you'll use it for another mod), this is what I do now:

    First, wrap some sticky tak around the back plug. I just make a long string with sticky tak, then stretch it as I go around the back plug a few times.

    Then, when you have enough sticky tak, use a plier to pinch it and pull it out. The sticky tak adds friction and protects the back plug.

  17. xJoeNx
    Date: Sat, Nov 15 2008 16:24:28

    Is the Airfit an american pen, like i could find it at staples, wal-mart or any other store like that?

  18. Mr.Squekers
    Date: Sat, Nov 15 2008 17:27:19

    No, I told you that in the Shoutbox.

  19. sangara
    Date: Sat, Nov 15 2008 18:21:28

    You can find it in some book stores though, both iMatt and I have been able to find it.

  20. Kam
    Date: Sat, Nov 15 2008 18:37:29

    They're from Zebra Japan if I'm not mistaken. If you find it in US, it's probably imported? dunno.gif I wouldn't count on finding them in mass retail stores though.

  21. sangara
    Date: Sat, Nov 15 2008 18:39:47

    Yea it was a Franklin Covey store so idk? That's a chain but not like Wal-Mart. Not sure where iMatt was able to find them.

  22. Jiinn
    Date: Sat, Nov 15 2008 19:08:30

    So basically what I need is :
    2 airfits
    1 supertip
    1 double capped comssa?

  23. Lawliet
    Date: Sat, Nov 15 2008 19:25:09

    Yes.

  24. Aiyah
    Date: Sun, Nov 16 2008 05:59:41

    are the airfits used in this mod pens or mech pencils?

  25. ryzaku
    Date: Sun, Nov 16 2008 06:12:57

    QUOTE (Aiyah @ Nov 16 2008, 12:59 AM) <{POST_SNAPBACK}>
    are the airfits used in this mod pens or mech pencils?

    MPs

  26. Scandiacus
    Date: Sun, Nov 16 2008 11:56:17

    I can't view the video ph34r.gif

  27. aoffrozen
    Date: Sun, Nov 16 2008 12:24:19

    QUOTE (Scandiacus @ Nov 16 2008, 06:56 AM) <{POST_SNAPBACK}>
    I can't view the video ph34r.gif


    me too ^^ i think everybody in thailand too .

  28. Mr.Squekers
    Date: Sun, Nov 16 2008 12:48:21

    QUOTE (ryzaku @ Nov 16 2008, 01:12 AM) <{POST_SNAPBACK}>
    MPs

    No you don't know that. They are the pen version.

  29. loonwern93
    Date: Tue, Nov 18 2008 13:42:28

    asking again. what type of airfits are used? gel pen ones or mp ones?

    and how come the video is not available? someone check on it. wink.gif

  30. 3D
    Date: Tue, Nov 18 2008 15:27:17

    Can use Pilot SDR-200's back plug replace comssa's back plug .

    It's can hold on body Crayola .


    I think this mod so easy for hard trick.

    I love this mod . xD

  31. Eric
    Date: Tue, Nov 18 2008 16:00:58

    QUOTE (MikeKe @ Nov 10 2008, 07:09 PM) <{POST_SNAPBACK}>
    Ahah, nice tutorial biggrin.gif
    One question, how much do airfits cost? and where do they sell them? xD


    I see them a lot in asian stationary stores.

  32. Aries
    Date: Tue, Nov 18 2008 16:29:46

    It is the Mechanical Pencil version.

  33. Glamouraz
    Date: Tue, Nov 18 2008 16:56:42

    Hey TEK,

    can you upload the video again?

    I think many of us can't view it. I can't view it too.

  34. Take-a-chill-pill
    Date: Tue, Nov 18 2008 20:42:08

    Is the Supertip compulsory, i mean like, do you have to have it or will it make the pen unbalanced

  35. Kam
    Date: Tue, Nov 18 2008 20:55:17

    QUOTE (loonwern93 @ Nov 18 2008, 05:42 AM) <{POST_SNAPBACK}>
    asking again. what type of airfits are used? gel pen ones or mp ones?

    and how come the video is not available? someone check on it. wink.gif


    I don't think it matters...You can use either one. They are ALMOST EXACTLY the same. I have both and they both work. If anything, I would say the pen version is slightly heavier...just by a bit. The MP version one you have to remove a little thing inside the tip, so it's a bit lighter, but it's hardly noticeable.

    QUOTE (Take-a-chill-pill @ Nov 18 2008, 12:42 PM) <{POST_SNAPBACK}>
    Is the Supertip compulsory, i mean like, do you have to have it or will it make the pen unbalanced


    If you use other bodies like a comssa or miffy&melanie body, the pen will be shorter. It won't really affect balance, but we all know shorter = less momentum. It's up to you though.

  36. dEViLoFmE
    Date: Fri, Nov 21 2008 16:23:38

    QUOTE (Glamouraz @ Nov 19 2008, 12:56 AM) <{POST_SNAPBACK}>
    Hey TEK,

    can you upload the video again?

    I think many of us can't view it. I can't view it too.

  37. Kam
    Date: Fri, Nov 21 2008 19:26:14

    a lot of people have asked me about the grips and rings I use for my Buster Cyl. I didn't think it needed much explanation, but apparently it does require some.

    So here's a very short and simple summary


    Spoiler:


    They are blue profile grips and airfit metal rings, so it's not hard or expensive to make.

    They fit like this

    CODE
    <|####[|)cap-body-cap(|]###|>


    < = airfit metal tip
    | = 1 profile ring (from center of the grip)
    # = airfit grip
    [ = airfit metal ring (the opening should face the profile ring)
    |) = 1.5 profile rings from edges (big ring from one side, 1.5 ring from the other side)


    Now, if that's not clear...too bad...maybe you want to stick with the original version wink.gif

  38. Glamouraz
    Date: Fri, Nov 21 2008 19:29:57

    Lol.. 1.5 profile rings?

  39. spinnerboy01
    Date: Sat, Nov 22 2008 03:58:59

    thanks tek for the simple but awesome mod

  40. Odessy
    Date: Sat, Nov 22 2008 04:14:58

    QUOTE (spinnerboy01 @ Nov 21 2008, 10:58 PM) <{POST_SNAPBACK}>
    thanks tek for the simple but awesome mod

    RJ the mod is from spinnerpeem tek just basicly made his own on video as a tutorial xP

  41. Jiinn
    Date: Sat, Nov 22 2008 12:24:01

    Is it heavier with the rings and extra grips?

  42. Hira
    Date: Mon, Nov 24 2008 06:52:05

    yay! ty for the tut biggrin.gif and ill be on the look out for them at franklin.

  43. daffy
    Date: Tue, Nov 25 2008 22:43:24

    can the airfits be subbed? dry.gif

  44. Aiyah
    Date: Tue, Nov 25 2008 23:33:03

    QUOTE (Jiinn @ Nov 22 2008, 04:24 AM) <{POST_SNAPBACK}>
    Is it heavier with the rings and extra grips?

    [sarcasm]no, cause when you add stuff to a mod, it gets lighter[/sarcasm]

  45. Kam
    Date: Tue, Nov 25 2008 23:38:41

    QUOTE (Jiinn @ Nov 22 2008, 04:24 AM) <{POST_SNAPBACK}>
    Is it heavier with the rings and extra grips?


    It is heavier, but doesn't necessarily add momentum to it, since you're moving the grip closer to the center of the body.

  46. vn_spinner
    Date: Tue, Nov 25 2008 23:40:23

    QUOTE (Kam @ Nov 25 2008, 06:38 PM) <{POST_SNAPBACK}>
    It is heavier, but doesn't necessarily add momentum to it, since you're moving the grip closer to the center of the body.


    how long are the tips of the airfit pens

  47. xxdefinitionxx
    Date: Tue, Nov 25 2008 23:55:34

    QUOTE (daffy @ Nov 25 2008, 02:43 PM) <{POST_SNAPBACK}>
    can the airfits be subbed? dry.gif


    Yes...Zebra Airfit, Papermate Aspire, Pilot Nextage
    are all Dr. GRIP knock offs...(though dr grips are made by pilot also, they're offspring)

    You can use a Japanese Dr. Grip to make this pen if you want....amreican dr grips wouldn't work so well because the rubber grip is less narrow than the japanese one and wouldnt stay on the comssa....

    This mod is pretty much a comssa Kt with a less slippery body.

  48. Citadel
    Date: Thu, Nov 27 2008 23:14:01

    Is there a link to the tutorial from FPSB?

    Do the tips just stay on by the Airfit grips holding them in place?

    I made one and enjoy it. (Assuming I did it right. laugh.gif) It's a bit heavier than I expected, but it's pretty fun to use.

  49. SJ.
    Date: Thu, Nov 27 2008 23:21:32

    QUOTE (Citadel @ Nov 27 2008, 04:14 PM) <{POST_SNAPBACK}>
    Is there a link to the tutorial from FPSB?

    Do the tips just stay on by the Airfit grips holding them in place?

    I made one and enjoy it. (Assuming I did it right. laugh.gif) It's a bit heavier than I expected, but it's pretty fun to use.

    the airfit grip is pretty tight so it basically holds any tip
    try using a lighter tip if u feel its too heavy

  50. Lawliet
    Date: Fri, Nov 28 2008 00:21:28

    I wub.gif this pen...

  51. Ogarathe
    Date: Fri, Nov 28 2008 00:46:36

    QUOTE (xxdefinitionxx @ Nov 26 2008, 10:55 AM) <{POST_SNAPBACK}>
    Yes...Zebra Airfit, Papermate Aspire, Pilot Nextage
    are all Dr. GRIP knock offs...(though dr grips are made by pilot also, they're offspring)

    You can use a Japanese Dr. Grip to make this pen if you want....amreican dr grips wouldn't work so well because the rubber grip is less narrow than the japanese one and wouldnt stay on the comssa....

    This mod is pretty much a comssa Kt with a less slippery body.


    Are the subs for tips only? Or do they have the same grip as well?

  52. Nolan
    Date: Fri, Nov 28 2008 00:49:46

    Yes, the pilot nextage have the closest tips and grips to a zebra airfit

  53. Anemia
    Date: Fri, Nov 28 2008 01:00:23

    I would only make this with a comssa body, it's way too long.

  54. nateiskewl
    Date: Fri, Nov 28 2008 18:21:26

    QUOTE (Anemia @ Nov 27 2008, 05:00 PM) <{POST_SNAPBACK}>
    I would only make this with a comssa body, it's way too long.


    It would be the same length.

  55. loonwern93
    Date: Mon, Dec 1 2008 08:45:07

    for those who cant see the video, this is the FPSB tuto link

    http://thefpsb.penspinning.fr/viewtopic.php?f=61&t=395

  56. Glamouraz
    Date: Mon, Dec 1 2008 08:53:07

    lol thanks loonwern93

  57. torune-do
    Date: Mon, Dec 1 2008 16:52:34

    just made the mod! great pen spinnerpeem

    and thanks for the pieces here&now!

  58. Jiinn
    Date: Tue, Dec 9 2008 09:44:09

    Shit I damaged the ST barrel and now it looks like crap.

    And I dunno if my grip is shorter or something, but even after adding the metal rings and the anyball grips my grip is still pretty much at the end of the comssa cap O.o

    Hope you understand what im saying

  59. Lawrence33196
    Date: Mon, Dec 15 2008 03:01:45

    this pen spins really well and its simple to make.

  60. jopi
    Date: Tue, Dec 16 2008 18:45:43

    haha this pen is so nice and so fucking heavy biggrin.gif:D hahah

    now i dont wonder anymore:D

  61. Clyde Cazeñas
    Date: Wed, Dec 17 2008 11:24:03

    can I use lil handz marker for the body ???? their caps and body look the same..

  62. EchBoi
    Date: Wed, Dec 17 2008 11:48:51

    Yeah I wanna know too... lolz

  63. H2FLO
    Date: Thu, Dec 18 2008 11:08:00

    thanks for posting this TEK!!! laugh.gif , i've been looking for something like this for quite a long time

  64. KhaDori
    Date: Tue, Dec 23 2008 16:58:11

    Really nice tutorial TEK!!
    I have just made that mod, it has good momentum, and i did 5 busts with it. smile.gif Its super!!

  65. Skrzat
    Date: Sun, Dec 28 2008 12:09:54

    I just made it and i will say...
    Its not as good as u write.
    Kt is 3x better imo...

  66. SuNgcHanG
    Date: Sun, Dec 28 2008 16:04:49

    Nice mod ! isit heavier than a kt ?

  67. Zweebna
    Date: Sun, Dec 28 2008 16:27:44

    QUOTE (SuNgcHanG @ Dec 28 2008, 11:04 AM) <{POST_SNAPBACK}>
    Nice mod ! isit heavier than a kt ?

    QUOTE (TEK @ Nov 10 2008, 08:33 PM) <{POST_SNAPBACK}>
    -weight is about 20grams (kt is 16g)

    So yes

  68. KL-7
    Date: Sun, Jan 4 2009 14:23:35

    What is the best way to remove gold text on the body of Crayola marker??? And how to make smooth the part of the body, where this text is placed???
    I've received BusterCYL body from penwish and the text on it isn't such smooth as it's on the M&M's body, for example...

    But it's really wonderful white mod =) I like it biggrin.gif

    Thnx to Spennerpeem for mod, Tek for tutor and Penwish for details =)

  69. Mach5
    Date: Fri, Jan 9 2009 01:35:31

    just got a Buster CYL from CaliMartinio and it spins awesome. Thanks for the tutorial.

  70. Rai289
    Date: Mon, Jan 12 2009 08:52:43

    I have a pen that looks exacly the same as an airfit but is called Zebra DRIFT Gel... Can I use these instead?

  71. G10
    Date: Mon, Jan 12 2009 09:19:01

    it says "this video is not available in your country".....

    why is that?? wink.gif

  72. ClydeメEC
    Date: Tue, Jan 13 2009 08:51:36

    hey I just made one and...is it just me or does the comssa cap really go over only on the backplug? because I try to fit it on the body and it won't fit...and if it should really go over only on the backplug then it's unstable lol...and the front part too...the cap doesn't fit on the body...maybe I did something wrong...help pls

  73. Kam
    Date: Tue, Jan 13 2009 09:49:11

    QUOTE (ClydeメEC @ Jan 13 2009, 12:51 AM) <{POST_SNAPBACK}>
    hey I just made one and...is it just me or does the comssa cap really go over only on the backplug? because I try to fit it on the body and it won't fit...and if it should really go over only on the backplug then it's unstable lol...and the front part too...the cap doesn't fit on the body...maybe I did something wrong...help pls


    u're supposed to tape the front and the backplug until it fits snuggly. Did u even watch the tutorial? tongue.gif

  74. G10
    Date: Tue, Jan 13 2009 10:08:18

    QUOTE (Kam @ Jan 13 2009, 05:49 PM) <{POST_SNAPBACK}>
    u're supposed to tape the front and the backplug until it fits snuggly. Did u even watch the tutorial? tongue.gif


    that's my point..... it says "this video is not available in your country".....

    huh.gif

  75. ClydeメEC
    Date: Tue, Jan 13 2009 10:09:28

    QUOTE (Kam @ Jan 13 2009, 05:49 PM) <{POST_SNAPBACK}>
    u're supposed to tape the front and the backplug until it fits snuggly. Did u even watch the tutorial? tongue.gif

    oh...the comssa caps don't really fit on the body? lol because it's too thick...lmao I got pissed at the backplug coming off whenever I take the cap off dry.gif so I superglued it(but I taped the backplug first so it fits inside the supertip).

  76. PenCell
    Date: Tue, Jan 13 2009 23:19:08

    I made one and imo its one of my worst mods. For me it just has to much momentum. Sure i can do a couple more busts then usual, but i just got a tornado mod and i can bust just as well as that.

  77. Sfsr
    Date: Wed, Jan 21 2009 16:22:44

    "This video is not available in your country. "

    Why? I've been getting that for videos now and then, but I've never figured out why.

  78. KL-7
    Date: Wed, Jan 21 2009 18:18:20

    QUOTE (Sfsr @ Jan 21 2009, 06:22 PM) <{POST_SNAPBACK}>
    "This video is not available in your country. "

    Why? I've been getting that for videos now and then, but I've never figured out why.

    I've uploaded it here =) It'll be available soon...
    If TEK has something against my uploading I'll remove it =)



    I've seen the same message, but there is no problem while downloading it... =)

    PS
    I've found how to solve this problem:
    QUOTE
    YouTube uses your computer IP address to determine your physical location / country. In order to bypass these country-specific restrictions on YouTube, try this trick:

    If the URL of the YouTube video is http://www.youtube.com/watch?v=yEwD36Dk1jw - just replace the /watch?v= part with /v so your new URL becomes http://www.youtube.com/v/yEwD36Dk1jw

    Full article

    Don't know if it works 'cos I've not enough traffic =/

  79. Sakura
    Date: Sun, Jan 25 2009 02:11:29

    Doesn't people facepalm you for using a Buster CYL?

  80. XternalメDGN
    Date: Sun, Jan 25 2009 02:19:27

    QUOTE (Sfsr @ Jan 22 2009, 12:22 AM) <{POST_SNAPBACK}>
    "This video is not available in your country. "

    Why? I've been getting that for videos now and then, but I've never figured out why.

    i think its because of the BGM, some new deal that youtube has with the artistes.
    even a video i made and uploaded couldnt be viewed by my own friends. facepalm.gif

  81. BlacknWhite
    Date: Sun, Jan 25 2009 11:12:18

    QUOTE (KL-7 @ Jan 22 2009, 02:18 AM) <{POST_SNAPBACK}>
    I've uploaded it here =) It'll be available soon...
    If TEK has something against my uploading I'll remove it =)


    Spoiler:


    I've seen the same message, but there is no problem while downloading it... =)

    PS
    I've found how to solve this problem:

    Full article

    Don't know if it works 'cos I've not enough traffic =/

    Doesn't work for me... dry.gif

  82. Archermitch
    Date: Thu, Feb 12 2009 05:27:10

    QUOTE (PenCell @ Jan 13 2009, 03:19 PM) <{POST_SNAPBACK}>
    I made one and imo its one of my worst mods. For me it just has to much momentum. Sure i can do a couple more busts then usual, but i just got a tornado mod and i can bust just as well as that.

    Were the pens used in this mod found in America?

  83. K2
    Date: Thu, Feb 12 2009 23:07:11

    QUOTE (Archermitch @ Feb 12 2009, 12:27 AM) <{POST_SNAPBACK}>
    Were the pens used in this mod found in America?

    The Crayola super tips are found in America. The airfits actually could be found in America, but the comssa caps are from Korea.

  84. elijah1210
    Date: Fri, Feb 13 2009 02:22:42

    what are some substitutes to commsa caps? im having some trouble getting those in my area and i haven't really started trading yet so im trying to find some alternatives

  85. FrozenIce
    Date: Fri, Feb 13 2009 02:30:15

    QUOTE (elijah1210 @ Feb 12 2009, 06:22 PM) <{POST_SNAPBACK}>
    what are some substitutes to commsa caps? im having some trouble getting those in my area and i haven't really started trading yet so im trying to find some alternatives


    There aren't many subs for the ComSSa caps unfortunately. sad.gif

    The closest things are Bellcolors, but those are very hard to find outside of Europe. :/

  86. godspinz
    Date: Fri, Feb 13 2009 03:59:22

    i love this mod, but im starting to get tired of it a little, and why not spin a metal rod

  87. Archermitch
    Date: Fri, Feb 13 2009 04:05:47

    QUOTE (godspinz @ Feb 12 2009, 07:59 PM) <{POST_SNAPBACK}>
    i love this mod, but im starting to get tired of it a little, and why not spin a metal rod

    what do you mean?

  88. iamk34n3
    Date: Fri, Feb 13 2009 04:07:03

    Because he has the infamous post of: "Hey guys know anything that heavier than a buster CYL? Its starting to get light."

  89. Mach5
    Date: Fri, Feb 13 2009 06:29:42

    How is the Buster light? It is like so freakin heavy. After spinning it for like a while my hand was so sore. Its very heavy.

  90. elijah1210
    Date: Sat, Feb 14 2009 00:34:54

    hey can i use a crayola sketching as a sub for the barrel? are there any subs for the supertip barrel?
    im going for a comssa-ish look but can't find a black super tip anywhere

  91. FrozenIce
    Date: Sat, Feb 14 2009 00:52:18

    QUOTE (elijah1210 @ Feb 13 2009, 04:34 PM) <{POST_SNAPBACK}>
    hey can i use a crayola sketching as a sub for the barrel? are there any subs for the supertip barrel?
    im going for a comssa-ish look but can't find a black super tip anywhere


    If it's similar enough in length, width, thickness, etc. and the caps can fit on it, sure. It's your mod after all. wink.gif

    But if you have one, you can just use a ComSSa body.

  92. penmaster
    Date: Wed, Feb 18 2009 01:34:23

    the doesn't work for us filipinos T_T

  93. wo_shi_ni
    Date: Wed, Feb 18 2009 01:38:02

    can you make one for me????

  94. Sankaku
    Date: Wed, Feb 18 2009 01:38:50

    QUOTE (Rai289 @ Jan 12 2009, 12:52 AM) <{POST_SNAPBACK}>
    I have a pen that looks exacly the same as an airfit but is called Zebra DRIFT Gel... Can I use these instead?

    LOL thats an airfit, it just looks like it says drift

  95. pongpong
    Date: Wed, Feb 18 2009 09:16:45

    QUOTE (Sankaku @ Feb 18 2009, 08:38 AM) <{POST_SNAPBACK}>
    LOL thats an airfit, it just looks like it says drift



    no!!!!!!!!!! don't use those, use the ones without the 'GEL' writiing those tips are very light, like 1/2 of airfit


    use pen or pencil tips, just don't use GEL


  96. Archermitch
    Date: Fri, Feb 20 2009 01:32:46

    This pen is awesome. If only is was a little longer. tongue.gif

  97. sangara
    Date: Fri, Feb 20 2009 01:34:01

    QUOTE (Archermitch @ Feb 19 2009, 05:32 PM) <{POST_SNAPBACK}>
    This pen is awesome. If only is was a little longer. tongue.gif


    Are you serious?

  98. Shadowserpant
    Date: Fri, Feb 20 2009 01:36:32

    LOL longer wtf

  99. AwonW
    Date: Fri, Feb 20 2009 01:38:29

    QUOTE (Archermitch @ Feb 19 2009, 05:32 PM) <{POST_SNAPBACK}>
    This pen is awesome. If only is was a little longer. tongue.gif

    rotfl.gif

  100. kenny158
    Date: Fri, Feb 20 2009 01:47:30

    isnt that a bit over doing it?

  101. Archermitch
    Date: Fri, Feb 20 2009 04:11:41

    LOL. Don't get me wrong it's a good size, but I've been spinning with the Grip Avaire and Compirat for way way tooo long.

    And the buster cyl is now on penwish.

  102. HKspinner
    Date: Thu, Feb 26 2009 11:04:47

    Hey tek, can you make the tutorial in text. I somehow can't see the vid cause its not allowed in my country or domain. sad.gif Thanks. smile.gif

  103. Shimo
    Date: Sun, Mar 1 2009 15:21:38

    This pen is so nice and heavey XD

  104. IAmTheMrGuy
    Date: Sun, Mar 1 2009 16:02:54

    QUOTE (HKspinner @ Feb 26 2009, 06:04 AM) <{POST_SNAPBACK}>
    Hey tek, can you make the tutorial in text. I somehow can't see the vid cause its not allowed in my country or domain. sad.gif Thanks. smile.gif

    Here you go:

    -remove the tips from both airfits.
    -remove the grip from one of the airfits.
    -remove the cap from the super tip.
    -remove the super tip backplug (this is difficult, you will at least need pliers)
    -Take the inktube out of the super tip
    -wrap tape around the thin part of the dong-a back plug, you will need enough to make the back plug fit snugly into the back of the super tip
    -insert the dong-a back plug into the back of the super tip
    -wrap tape on the exposed part of the dong-a back plug. This is to make the dong-a cap fit more snuggly.
    -Put a dong-a cap on the backplug
    -put a dong-a cap on the front of the super tip
    -if you think you need it, you can wrap tape around the super tip to make the second dong-a cap fit better
    -cut the airfit grip in half
    -put one half of the grip on one of the dong-a caps, and one on the other.
    -stick one tip into each section of grip

  105. Commsa
    Date: Sun, Mar 1 2009 17:07:02

    QUOTE (TRoc @ Nov 10 2008, 09:59 PM) <{POST_SNAPBACK}>
    When I tried to mod with my supertip, the back plug would not come off and yours came off so easily. I ended up damaging the barrel.



    QUOTE (Shadowserpant @ Nov 10 2008, 10:01 PM) <{POST_SNAPBACK}>
    yeah that's exactly what happened to me when i made the ST, i absolutely couldnt get the backplug out, it ended up breaking



    QUOTE (PenCell @ Nov 10 2008, 10:06 PM) <{POST_SNAPBACK}>
    I had to freaking use a drill to get the backcap out. Howd you do it so easily?


    To get the backplug out, get some scissors. Now follow the steps:
    1. Put scissors between the barrel and the backplug opening
    2. Put enough pressure SO THAT IT GOES INTO THE PLUG BUT DOES NOT DAMAGE IT
    3. Pull the plug up so that it comes out
    4. Voila

    If you do this correctly, the backplug should not have been damaged

  106. khaotic
    Date: Thu, Mar 19 2009 21:16:28

    is there any way to get the writing off the supertip barrel?

  107. JC
    Date: Thu, Mar 19 2009 21:19:43

    QUOTE (khaotic @ Mar 19 2009, 05:16 PM) <{POST_SNAPBACK}>
    is there any way to get the writing off the supertip barrel?

    1. Spin it off
    2. Erase it off as much as possible, then scrap away at it with a razor blade (I think i remember kam saying that that's how he removed the writing off his supertip barrel)
    3. Acetone (may ruin the body a bit though...)

    *recommends just doing option #2*

  108. khaotic
    Date: Thu, Mar 19 2009 21:32:51

    QUOTE (JC @ Mar 19 2009, 04:19 PM) <{POST_SNAPBACK}>
    1. Spin it off
    2. Erase it off as much as possible, then scrap away at it with a razor blade (I think i remember kam saying that that's how he removed the writing off his supertip barrel)
    3. Acetone (may ruin the body a bit though...)

    *recommends just doing option #2*


    thanks i appreciate it

  109. Archermitch
    Date: Fri, Mar 20 2009 02:32:31

    QUOTE (khaotic @ Mar 19 2009, 02:16 PM) <{POST_SNAPBACK}>
    is there any way to get the writing off the supertip barrel?

    I think some people use sandpaper or nail filers? I'm not sure about that though.

  110. Trackstud
    Date: Fri, Mar 20 2009 02:36:53

    QUOTE (Archermitch @ Mar 19 2009, 07:32 PM) <{POST_SNAPBACK}>
    I think some people use sandpaper or nail filers? I'm not sure about that though.

    You have to ask Kam on how to take the text off. He told me once on the SB but i forgot dry.gif

  111. Lawr3nce
    Date: Sun, Mar 22 2009 03:40:09

    i just spun the writing on my buster off.
    like two weeks of spinning and the writing was completely gone.

  112. bioshock
    Date: Mon, Mar 23 2009 11:44:22

    This is the ULTIMATE marker mod according to me biggrin.gif

  113. Kam
    Date: Mon, Mar 23 2009 20:10:00

    ok...here's the thing...supertip markers don't have a consistent writing on their bodies. Some are easier to remove, while others are harder. So while I don't doubt some people can just spin off the writing, that may not work for every supertip (at least not perfectly).

    The main problem is because the body is embossed (carved in) a bit, which makes corners of the letters hard to reach via eraser.

    So, if you really want to get the body clean, it's not gonna be easy, but here's how I do it:

    1. Use an eraser to clean off as much as you can.
    2. For the parts that are sticking out, use a blade/pen knife to flatten it out. Don't shave too much though. You don't want to ruin the body, just make it even.
    3. Erase again.
    4. For any left overs (usually the corner of letters that the eraser can't get to), use the tip of a pen knife to scrape the ink. You are not trying to cut off the body...just scrape the ink enough so you can blow or wash it off.

    Alternatively, the easier way to accomplish this is to

    1. wrap a white outsert

    xD

  114. Pesadilla
    Date: Wed, Apr 22 2009 18:01:35

    good tutorial and I like ur combo at the end, whats the breakdown?? lol

  115. Archermitch
    Date: Thu, Apr 23 2009 01:40:16

    QUOTE (Pesadilla @ Apr 22 2009, 11:01 AM) <{POST_SNAPBACK}>
    good tutorial and I like ur combo at the end, whats the breakdown?? lol

    I agree. I would like a breakdown of this combo, as well.

  116. watching
    Date: Thu, Apr 23 2009 02:17:44

    Supertip backplugs are EXTREMELY easy to remove why are people always complaining about them.

  117. kenny158
    Date: Thu, Apr 23 2009 02:38:41

    @above its hard if its a old supertip, with a brand new one its easy to remove

  118. Yzaraka
    Date: Thu, Apr 23 2009 12:11:08

    looks good. i'll try it out

  119. purplet
    Date: Thu, Apr 23 2009 14:57:12

    i got 5supertip, all out of 1package.
    3went out easy, 2didnt go out.
    Well its cheap (in a negative way^^) pens:)

  120. Edor
    Date: Tue, Apr 28 2009 12:26:47

    where can i find the pic of the buster with the blue rings?

    edit
    BTW i made a buster cyl like that (3rd pic) but the grip ring (i used sailor) keeps falling off what can i do so it wont fall off?

  121. HowRU?
    Date: Tue, May 5 2009 15:17:03



    hi tek...i love this mod...but i cant see ur youtube vidz they say the vidz was unavailable for my country...

    nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
    ooooo...

    can u help me wif it?

    or can u send me any download link to tat vidz or jus send me the vidz...pls?

    i would seriously appreciate ur kind help...thx alot...=)


    hope u reply soon...XD

  122. Archermitch
    Date: Wed, May 6 2009 00:11:03

    QUOTE (HowRU? @ May 5 2009, 08:17 AM) <{POST_SNAPBACK}>
    hi tek...i love this mod...but i cant see ur youtube vidz they say the vidz was unavailable for my country...

    nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
    ooooo...

    can u help me wif it?

    or can u send me any download link to tat vidz or jus send me the vidz...pls?

    i would seriously appreciate ur kind help...thx alot...=)


    hope u reply soon...XD


    Here you go. tongue.gif

    QUOTE (IAmTheMrGuy @ Mar 1 2009, 09:02 AM) <{POST_SNAPBACK}>
    Here you go:

    -remove the tips from both airfits.
    -remove the grip from one of the airfits.
    -remove the cap from the super tip.
    -remove the super tip backplug (this is difficult, you will at least need pliers)
    -Take the inktube out of the super tip
    -wrap tape around the thin part of the dong-a back plug, you will need enough to make the back plug fit snugly into the back of the super tip
    -insert the dong-a back plug into the back of the super tip
    -wrap tape on the exposed part of the dong-a back plug. This is to make the dong-a cap fit more snuggly.
    -Put a dong-a cap on the backplug
    -put a dong-a cap on the front of the super tip
    -if you think you need it, you can wrap tape around the super tip to make the second dong-a cap fit better
    -cut the airfit grip in half
    -put one half of the grip on one of the dong-a caps, and one on the other.
    -stick one tip into each section of grip

  123. RH
    Date: Thu, May 7 2009 03:41:57

    this is the best pen ever... very hevy but awsome

  124. BUSTER
    Date: Thu, May 7 2009 07:42:48

    i actually have one and so far so good

  125. jimmyfrostedflakes
    Date: Sat, May 9 2009 16:25:00

    you can also use the rings for the airfit

  126. NWStrike
    Date: Wed, May 20 2009 06:33:41

    WoW Great Mod Thanks

  127. tetris
    Date: Sun, May 31 2009 16:37:55

    howd you put the blue rings on the 3rd buster cyl?

  128. phua sy
    Date: Wed, Jun 3 2009 14:06:16

    can namae caps replace the comssa caps of buster cyl and bic round stic grip replace dong-a back plug?

  129. Nation
    Date: Sat, Jun 13 2009 14:49:40

    QUOTE (KL-7 @ Jan 4 2009, 09:23 AM) <{POST_SNAPBACK}>
    What is the best way to remove gold text on the body of Crayola marker??? And how to make smooth the part of the body, where this text is placed???
    I've received BusterCYL body from penwish and the text on it isn't such smooth as it's on the M&M's body, for example...

    But it's really wonderful white mod =) I like it biggrin.gif

    Thnx to Spennerpeem for mod, Tek for tutor and Penwish for details =)


    If you're desperate, use a file, but I find that spinning it often will get it off very smoothly

  130. exiled117
    Date: Sun, Jun 14 2009 03:36:42

    this pen is so beautiful its spins itself great tut thanks

  131. Miguel
    Date: Mon, Nov 2 2009 11:26:25

    Always wanted this mod T_T. I should have ordered this mod instead of 2 Metallic Comssas in Penwish dry.gif

  132. Krispy Kreme
    Date: Tue, Nov 3 2009 07:33:40

    QUOTE (Miguel @ Nov 2 2009, 09:26 PM) <{POST_SNAPBACK}>
    Always wanted this mod T_T. I should have ordered this mod instead of 2 Metallic Comssas in Penwish dry.gif


    happyy.gif I have a buster ! ! !

  133. Kaffatsum
    Date: Wed, Nov 4 2009 01:33:44

    QUOTE (tetris @ May 31 2009, 11:37 AM) <{POST_SNAPBACK}>
    howd you put the blue rings on the 3rd buster cyl?


    Look on page 2 of the thread on Kam's post.
    He tells you how he makes it...

  134. NoRevo
    Date: Wed, Nov 4 2009 07:53:47

    Is this better than a KT?

    I'd think so happy.gif

  135. duckfun
    Date: Wed, Nov 4 2009 12:48:11

    QUOTE (NoRevo @ Nov 4 2009, 01:53 AM) <{POST_SNAPBACK}>
    Is this better than a KT?

    I'd think so happy.gif

    its more of an opinion whether its better
    dr kt is lighter than this so if you like heavy mods this is for you

  136. Nation
    Date: Tue, Nov 17 2009 22:04:01

    QUOTE (Skrzat @ Dec 28 2008, 07:09 AM) <{POST_SNAPBACK}>
    I just made it and i will say...
    Its not as good as u write.
    Kt is 3x better imo...

    KT is twice as more expensive

  137. spinneraddiction
    Date: Tue, Nov 17 2009 22:26:02

    buster cyls are sticks, but i like them biggrin.gif

  138. Mr. Ninja
    Date: Sat, Nov 28 2009 16:51:44

    Busters are my favoritest pen ever. Or at least until I get a KT. We'll see who wins.

  139. JumpMan23
    Date: Mon, Feb 15 2010 01:02:38

    Is there a difference between the Airfit gel pens and the Airfit mechanical pencils in terms of there metal tips and grip?

  140. RH
    Date: Mon, Feb 15 2010 01:08:48

    QUOTE (JumpMan23 @ Feb 14 2010, 09:02 PM) <{POST_SNAPBACK}>
    Is there a difference between the Airfit gel pens and the Airfit mechanical pencils in terms of there metal tips and grip?


    next time please read before posting, but because you are new here. yes the tips' weight are very different, but the grip is the same

  141. Rayrey
    Date: Mon, Feb 15 2010 01:15:18

    QUOTE (RH @ Feb 14 2010, 05:08 PM) <{POST_SNAPBACK}>
    next time please read before posting, but because you are new here. yes the tips' weight are very different, but the grip is the same


    What? The tip of a Airfit mechanical pencil with the lead pointer taken out weighs exactly the same as a that of a Airfit gel pen.

  142. RH
    Date: Mon, Feb 15 2010 01:17:10

    QUOTE (Rayrey @ Feb 14 2010, 08:15 PM) <{POST_SNAPBACK}>
    What? The tip of a Airfit mechanical pencil with the lead pointer taken out weighs exactly the same as a that of a Airfit gel pen.


    are you kidding me?! MP airfits weigh so much more than Airfit jel. Jels are practically hollowed out MP/Ballpoint airfit tips, and because its "hollowed out" it weighs much less

  143. Rayrey
    Date: Mon, Feb 15 2010 01:22:30

    QUOTE (RH @ Feb 14 2010, 05:17 PM) <{POST_SNAPBACK}>
    are you kidding me?! MP airfits weigh so much more than Airfit jel. Jels are practically hollowed out MP/Ballpoint airfit tips, and because its "hollowed out" it weighs much less


    I kid you not. I got both in front of me. If it's not the same in terms of weight, it's close.

  144. RH
    Date: Mon, Feb 15 2010 01:24:26

    QUOTE (Rayrey @ Feb 14 2010, 08:22 PM) <{POST_SNAPBACK}>
    I kid you not. I got both in front of me. If it's not the same in terms of weight, it's close.


    are you talking about ballpoint airfits or jel airfits?

    shaking them will feel the same, but spinning ballpoint/mp feel much heavier than gels

  145. Rayrey
    Date: Mon, Feb 15 2010 01:29:40

    QUOTE (RH @ Feb 14 2010, 05:24 PM) <{POST_SNAPBACK}>
    are you talking about ballpoint airfits or jel airfits?

    shaking them will feel the same, but spinning ballpoint/mp feel much heavier than gels


    I'm talking about ballpoint. My bad, thought the jell version was the same thing.

  146. hoiboy
    Date: Mon, Feb 15 2010 02:19:35

    QUOTE (JumpMan23 @ Feb 14 2010, 05:02 PM) <{POST_SNAPBACK}>
    Is there a difference between the Airfit gel pens and the Airfit mechanical pencils in terms of there metal tips and grip?

    QUOTE (RH @ Feb 14 2010, 05:08 PM) <{POST_SNAPBACK}>
    next time please read before posting, but because you are new here. yes the tips' weight are very different, but the grip is the same

    etc. quotes

    The metal tips are slightly different, but in terms of weight, they are very nearly the same (negligible).

    Grips are the same

  147. JumpMan23
    Date: Mon, Feb 15 2010 02:45:24

    So the weights on the MP and ballpoint tips are the same but the jel kind is lighter. That means I should get either the MP or the ballpoint ones for this mod, right?

  148. RH
    Date: Mon, Feb 15 2010 03:29:27

    QUOTE (JumpMan23 @ Feb 14 2010, 09:45 PM) <{POST_SNAPBACK}>
    So the weights on the MP and ballpoint tips are the same but the jel kind is lighter. That means I should get either the MP or the ballpoint ones for this mod, right?


    as a newcomer dont go on something this heavy yet

  149. pReTTysMooTh
    Date: Mon, Feb 15 2010 04:05:46

    QUOTE (RH @ Feb 14 2010, 10:29 PM) <{POST_SNAPBACK}>
    as a newcomer dont go on something this heavy yet


    you may or may not know he started spinning in 2006

  150. Tushix
    Date: Mon, Feb 15 2010 04:33:34

    Doesn't matter... The Jell tops are better ither way. I don't spin my Ball point pen buster at nall anymore cos it weighs WWAAAYYY to much I realized! ._.

  151. M0nst4r
    Date: Thu, Mar 11 2010 00:29:33

    any subs for wire cutters? cant find them in my house... pliers? last time i tried them they ripped the backcap.

  152. Nachoaddict
    Date: Fri, Mar 12 2010 00:40:26

    QUOTE (M0nst4r @ Mar 10 2010, 04:29 PM) <{POST_SNAPBACK}>
    any subs for wire cutters? cant find them in my house... pliers? last time i tried them they ripped the backcap.


    try hacksaw. what are using these for?

  153. heavyspinnerguy
    Date: Sat, Mar 13 2010 06:43:38

    @nachoaddict: taking off the backcap. sad.gif

  154. M0nst4r
    Date: Sat, Mar 13 2010 06:45:07

    yeah... wat heavy said...

  155. L2PlayNoob
    Date: Sun, Mar 14 2010 02:08:33

    Pliers have never failed for me. You just got to make sure that the pliers are making full contact with the ST backcap and no contact with the ST body. Then just squeeze tightly and give it a quick pull.
    I think it ripped once before, but I just did it again on the part that was still connected and it came out.

  156. +Guitrum+
    Date: Sun, Mar 14 2010 02:30:50

  157. RH
    Date: Sun, Mar 14 2010 02:35:04

    QUOTE (+Guitrum+ @ Mar 13 2010, 10:30 PM) <{POST_SNAPBACK}>

    Spoiler:



    lol you do it the exact same way i do it smile.gif

  158. BusterSpinner45
    Date: Sun, Mar 14 2010 05:05:17

    fellow pspinners can i ask i question what tip can be good to sub for the buster 'cause i lost my tips and replaced it with telescopics but i still have the grips and one more question can the sub be G2 EX tips?. thnx in advance

  159. blahblahting
    Date: Sun, Mar 14 2010 05:18:26

    QUOTE (BusterSpinner45 @ Mar 13 2010, 09:05 PM) <{POST_SNAPBACK}>
    fellow pspinners can i ask i question what tip can be good to sub for the buster 'cause i lost my tips and replaced it with telescopics but i still have the grips and one more question can the sub be G2 EX tips?. thnx in advance


    i dont even know any tips that are heavier than airfits >_> try dr grip tips? silicone gels? they would all make the buster lighter

  160. BusterSpinner45
    Date: Sun, Mar 14 2010 10:06:55

    i dont even know any tips that are heavier than airfits >_> try dr grip tips? silicone gels? they would all make the buster lighter


    Then what do you suggest from this list (w/ telescopics ok)


    G2 EX
    HGG
    Gripmatics

  161. Savian
    Date: Sun, Mar 14 2010 11:06:40

    QUOTE (BusterSpinner45 @ Mar 14 2010, 06:06 PM) <{POST_SNAPBACK}>
    i dont even know any tips that are heavier than airfits >_> try dr grip tips? silicone gels? they would all make the buster lighter


    Then what do you suggest from this list (w/ telescopics ok)


    G2 EX
    HGG
    Gripmatics


    Not G2 EX, the tips have a ridge at the bottom which won't fit into the comssa cap

    Ermm... HGG+Gripmatics should weigh quite a bit together, but it won't really look like a buster...

    Shaved down MP Nextage tips? ^^ but they're gonna be slightly lighter, and they're less wide than airfit tips

  162. first_timer
    Date: Mon, Mar 15 2010 10:10:17

    Whats a dong-a plug and where do i get one?

  163. chrisPS
    Date: Mon, Mar 15 2010 13:01:08

    QUOTE (first_timer @ Mar 15 2010, 06:10 PM) <{POST_SNAPBACK}>
    Whats a dong-a plug and where do i get one?


    you can get it from Dong-a Computer Sign pens


    example: http://penwish.com/product_info.php?products_id=451
    http://penwish.com/product_info.php?products_id=452

  164. BusterSpinner45
    Date: Fri, Apr 2 2010 02:22:17

    does the airfit pen have to be .5 or .7 .I dont know Thnx in advance for the reply

  165. Penwish
    Date: Fri, Apr 2 2010 02:29:07

    doesn't matter

  166. Simplex
    Date: Fri, Apr 2 2010 03:23:55

    looked through this. idk why no one thought of this before to remove writing :/

    scrub with the scrubby side of a sponge. writing comne off within seconds. and it leaves a finish almost like a ballsign. after a while of spinning the finish will turn to something like a cleaned super pirat.

  167. King Kommander X
    Date: Sat, Apr 3 2010 02:30:24

    are zebra airfits u.s friendly in the u.s?

  168. Ramen
    Date: Tue, Apr 13 2010 04:14:29

    err ne1 selling supertips?

  169. davidguy
    Date: Tue, Apr 13 2010 04:16:53

    QUOTE (Ramen @ Apr 12 2010, 09:14 PM) <{POST_SNAPBACK}>
    err ne1 selling supertips?


    you can just get them at walmart or target, they're like 24 for $5

  170. tito88
    Date: Tue, May 4 2010 00:58:54

    will the comssa v2 cap and backplug fit when making this mod?

  171. darkrose
    Date: Tue, May 4 2010 01:35:42

    QUOTE (tito88 @ May 3 2010, 08:58 PM) <{POST_SNAPBACK}>
    will the comssa v2 cap and backplug fit when making this mod?



    yes they are the same...

  172. hoiboy
    Date: Tue, May 4 2010 01:36:13

    no

    Edit: @darkrose: wtf are you talking about. search up a comssa v2 on penwish and look

  173. blahblahting
    Date: Tue, May 4 2010 01:40:46

    v2 comssa backplugs are impossible to even take out. and if you took them out, they wouldnt fit in the supertip w/o a buttload of tape. and if you could put the backplug in, its just a small nub and wont hold the comssa cap on.

  174. darkrose
    Date: Tue, May 4 2010 01:44:22

    QUOTE (hoiboy @ May 3 2010, 09:36 PM) <{POST_SNAPBACK}>
    no

    Edit: @darkrose: wtf are you talking about. search up a comssa v2 on penwish and look


    ohhhhh i thought he meant comssa v2 like pds one...
    i didn't know pw has his own comssa??

  175. BusterSpinner45
    Date: Sat, May 15 2010 17:12:14

    can somebody tell me height and width of supertip body only. not w/ cap and backplug of supertip?

    im gonna make an outsert for you guys ill try

  176. faysto
    Date: Sat, May 29 2010 08:03:21

    if i use gel airfit, mod is original or not?

  177. Penwish
    Date: Sat, May 29 2010 08:11:44

    use ball pt or pencil but ballpt is original jell is fine if you don't mind lighter

  178. gallade
    Date: Sun, May 30 2010 02:18:02

    I saw a person that made a MP buster cyl, anyone know how to do this? Thanks.

  179. Nation
    Date: Fri, Jun 4 2010 13:28:00

    QUOTE (gallade @ May 29 2010, 08:18 PM) <{POST_SNAPBACK}>
    I saw a person that made a MP buster cyl, anyone know how to do this? Thanks.

    I'm going to assume you're talking about dori's MP CYL.
    It uses airfit mechanical pencils and a namae body.
    I'm not sure how the mechanism was made, but I suppose you could PM dori or w/e

  180. Prince
    Date: Fri, Jun 4 2010 13:38:15

    Namae barrel makes the momentum really high, weaker barrel than supertip

  181. faysto
    Date: Fri, Jun 11 2010 18:48:08

    this busters
    http://penwish.com/product_info.php?products_id=924
    http://penwish.com/product_info.php?products_id=1045
    are made using airfit BA9 or JJ9?

  182. Chief_Snake
    Date: Fri, Jun 11 2010 20:47:06

    They are ballpoint, not jell

  183. Tushix
    Date: Fri, Jun 11 2010 20:55:41

    Actually, I'm pretty sure you can request a type of tip in the comment section when you make the order. I did that with some airfits once.