UPSB v3
Tutorials Pending Approval / X-S MX Mod
Why not be able to spin an already Dangerous tool?
-
Date: Wed, Nov 26 2008 01:04:41
X-S MX Mod
by NinjaKai
Stats:
Length: Aprox. 19cm
Weight: RSVP MX < X-S MX Mod
COG: Center of Pen (Take care in adjusting grip)
Style: Single Sided, Blade tool
Warning! - NinjaKai is not responsible for any stupidity or misuse of this mod! I do not want to receive blame if you make an attempt to hold up a Bank or stab someone with this mod! It is specifically crafted to be used as a TOOL, not as a weapon. I am also not at fault if you spin without the cap, because if you do that . . . you might have been recently diagnosed with down Syndrome. Keep out of reach of Children and do not take to school. USE YOUR BRAIN!
Spoiler:
Pens:
- 3 RSVPs (3 grips, 1 Body, 1 Cap)
- 1 Uniball Signo Broad (The Flat Grip)
- 1 Size 11 X-Acto blade
Tools:
- Small tooth saw
- Tape
- Knife (Only if you want the cut cap a bit more clean)
- Tweezers (For Grip appliance)
- Razor Blade
- Pliers (to help)
Tutorial:
Keep all the things to the left:
Step 1: Apply the grip rings from 3 of the RSVP Grips, and tape or file do whatever you can to have the tape evenly spread out.
Step 2: Apply Signo tip to the pen
Step 3: Apply grips to the Cap and Front end of pen
Step 4: Apply Insert, and colored paper to lower end of blade (So it blends) [Insert Size - 7.5 cm long, width depends on what you want]
Step 5: Cut your back cap, a few millimeters before the threads of the cap (Be careful not to cut close to the inner wings inside the cap, or the blade will be crooked)
Step 6: Apply the Blade, and make sure it is tight or it might fall out or not cut correctly
DONE!
Notes:
You will notice the grip color changed . . . that's because the gold grip looked like puke xD
If you completed the mod and ignored the Warning this is just a subtle reminder to READ IT! -
Date: Wed, Nov 26 2008 01:07:38
I don't really like it, but pretty impressive.
I'll go to school and stab someone with that XD -
Date: Wed, Nov 26 2008 01:08:14
so basically a signo tipped mx with a knife.
-
Date: Wed, Nov 26 2008 01:11:45QUOTE (Baaron @ Nov 25 2008, 05:08 PM) <{POST_SNAPBACK}>so basically a signo tipped mx with a knife.
Yeppers xD
BTW . . . I'm gonna make a retractable version l8r.
. . . I've decided the name sucks . . . since it's not fully ninja YET . . . New name:
X-S MX (Xacto-Signo MX) -
Date: Wed, Nov 26 2008 01:47:15
that is really creative
-
Date: Wed, Nov 26 2008 01:55:36QUOTE (NinjaKai @ Nov 25 2008, 05:11 PM) <{POST_SNAPBACK}>BTW . . . I'm gonna make a retractable version l8r.
ow? that thing looks really painful -
Date: Wed, Nov 26 2008 03:35:16
So you're going to make a switchblade mx? I suggest a whole line of weapon pens.... x] I can't wait to shank someone with this
"Hey Alex Pen Spinning makes you a nerd"
"Hey retard *stabbity stab* your dead..." -
Date: Wed, Nov 26 2008 03:42:24
The pen is a uniball signo broad if im not wrong
-
Date: Wed, Nov 26 2008 03:44:22
Yes officer.. I use this to cut inserts.... for pens....
-
Date: Wed, Nov 26 2008 04:01:45
I just made one =D Ill post a pic, Nice find 0 . 0
I wanna see a teacher stop me from massacering people at school nao ;D jk...
Some tips:
Don't cut as far as shown in the pic, cut only so that the the square end reaches the end of the cap, and doesn't portrude into the clear tube like his.
I used no insert, to do this, take the RSVP ink tube and trim it down a couple cm's then screw the back cap on with the ink tube inside, this way it looks like a normal pen with an ink tube, no suspicion =D
(mx gun?...) -
Date: Wed, Nov 26 2008 07:14:16QUOTE (shoeman6 @ Nov 25 2008, 08:01 PM) <{POST_SNAPBACK}>I just made one =D Ill post a pic, Nice find 0 . 0
I wanna see a teacher stop me from massacering people at school nao ;D jk...
Spoiler:
Some tips:
Don't cut as far as shown in the pic, cut only so that the the square end reaches the end of the cap, and doesn't portrude into the clear tube like his.
I used no insert, to do this, take the RSVP ink tube and trim it down a couple cm's then screw the back cap on with the ink tube inside, this way it looks like a normal pen with an ink tube, no suspicion =D
(mx gun?...)
Very well done, I like the Ink tube Idea, and about the back cap, I'd have to say it depends on what blade you find or whatever preference in placement . . . Whatever works. -
Date: Wed, Nov 26 2008 10:38:53
Wow... i wouldn't want to do aerial tricks with that. Now u can spin while modding.
-
Date: Wed, Nov 26 2008 10:41:23
look like a mx2 with xacto blade
-
Date: Wed, Nov 26 2008 10:52:11
hmm.
i think this is just another variation instead of a new mod.
its creative but well.
its just like a signo tipped MX and u merely place the x acto blade at the back.
and placing more rsvp grips, i meant the rings.
maybe when u made it retractable it will be better.
cos the mechanism would need more creativity and its gna be harder to make(: -
Date: Wed, Nov 26 2008 14:19:25
well the idea can be put into every mod =D X-s Vortex MX? X-s Comssa? X-s Dr.kt? =]
-
Date: Thu, Nov 27 2008 03:48:26QUOTE (shoeman6 @ Nov 26 2008, 06:19 AM) <{POST_SNAPBACK}>well the idea can be put into every mod =D X-s Vortex MX? X-s Comssa? X-s Dr.kt? =]
I thought the KT was dangerous enough . . . -
Date: Thu, Nov 27 2008 06:46:17
wut if the capp cums loose during an aerial.... and it hits u in the head .... i mean ya.... but nice
-
Date: Thu, Nov 27 2008 07:17:05QUOTE (godspinz @ Nov 26 2008, 10:46 PM) <{POST_SNAPBACK}>wut if the capp cums loose during an aerial.... and it hits u in the head .... i mean ya.... but nice
. . . I'd blame the builder not the designer. -
Date: Thu, Nov 27 2008 13:28:10QUOTE (godspinz @ Nov 27 2008, 01:46 AM) <{POST_SNAPBACK}>wut if the capp cums loose during an aerial.... and it hits u in the head .... i mean ya.... but nice
Well if there ISNT a nife and the capp hits you head yah, still gonna hurt... -
Date: Mon, Dec 1 2008 02:14:00
The Insert Design is finished:
The Size is 7.5 cm x 3.5 cm (Due to the length of the blade)
A PDS will be posted as soon as I figure out how to. xD -
Date: Mon, Dec 1 2008 02:16:50
yo this mod is killer literally
-
Date: Wed, Dec 17 2008 02:16:19
rofl i'd rather just make the mod w/o the knife....
but that's just me -
Date: Wed, Dec 17 2008 23:16:27
Thats indeed something new. I like the Idea of using a pen to make Gripcuts xD
I'm looking forward to the retractable ver! -
Date: Thu, Dec 18 2008 19:52:19QUOTE (duckfun @ Dec 16 2008, 06:16 PM) <{POST_SNAPBACK}> rofl i'd rather just make the mod w/o the knife....
but that's just me
But then It would be a cutom gripped RSVP (signo tip) MX! And thats not a health risk at all! -
Date: Tue, Jan 6 2009 14:55:09
The exacto blade in mine stays in perfectly
-
Date: Tue, Jan 6 2009 15:29:30
raelly nice.
i like it. -
Date: Sun, Jan 18 2009 04:08:09
i think it not sutable for penspin-.-
it's very dangerous -.- -
Date: Sun, Jan 18 2009 13:05:05
Nice mod. Great weapon for serial killers
. Really good idea 
-
Date: Mon, May 11 2009 22:15:06QUOTE (NinjaKai @ Dec 18 2008, 01:52 PM) <{POST_SNAPBACK}>But then It would be a cutom gripped RSVP (signo tip) MX! And thats not a health risk at all!
lol maybe i will try it nao that i got an exacto knife for papercrafting XDQUOTE (czesio @ Jan 18 2009, 07:05 AM) <{POST_SNAPBACK}>Nice mod. Great weapon for serial killers . Really good idea
lol its like some guy is just spinning and just stabs the next person to walk by him
-
Date: Tue, May 12 2009 05:28:55
mmmmmm
a bit dangerous for kid spinners -
Date: Sat, May 16 2009 02:20:52
I wonder what would happen if you were holding onto the cap doing infinities and you found out that the cap was loose and the barrel came off.....
-
Date: Thu, May 21 2009 16:24:09
fails to go past airport
-
Date: Thu, May 21 2009 19:47:49
LOL nerds can become killers now XD