UPSB v3
Pen Modifications / "What mods can I do with..."
Official Thread -- Other such threads will be closed
-
Date: Sun, Oct 14 2007 18:16:29
There's been many threads lately where the thread creator basically bought a whole bunch of pens and ask what kind of mods s/he can do with those pens. Instead of unnecessarily creating a new thread everytime someone needs help, just ask here
All other threads will be locked!!!
Start with G2 mods.
----
similar threads merged.
sketching -
Date: Sun, Oct 14 2007 18:49:56
RSVP MMX and DarkArchers HGG^2 are the most used ones, I guess.
-
Date: Sun, Oct 14 2007 19:12:36
u can make my mod, it uses an rsvp and a g2, its called a R²SG2VP
-
Date: Sun, Oct 14 2007 19:29:29
RSVG2 by SubParSpinner
QUOTE (SubParSpinner)Introduction:
Okay...first off I would like to say that this mod was a collaboration by Stuth and I. We were talking about making a mod together and after some MAJOR brainstorming, this is what we came up with. Now I hate to toot my own horn, but I think this could be one of the best mods...and finally, a retractable mod that everyone should be able to have access to. Stuth came up with the idea of what pens to use and I came up with the the way to make it retract...but only after playing off of his initial ideas. OK so here it goes:
Materials:
2 Pilot G2
1 RSVP (cap only)
Optional Choice (pick one or the other) :
3rd G2 or number 2 pencil
A Saw
A File
Instuctions:- Break clip off of G2
- Remove cap from RSVP
- Break off clip and file smooth
- Using a saw, cut the tip of the cap off right under the little plastic ball at the tip.
- File down the end that you just cut to make it smooth and even.
- Take apart the second G2 and remove the clicker from the top by pushing it down through the pen.
- Put the clicker into the RSVP cap through the hole
- Now comes the decision you have to make...You need a piece to push the original clicker on the first G2. I have 2 different methods...the first is to use a 3rd G2 clicker piece, and the other is to cut a piece of a number 2 pencil. (I prefer to use the G2 clicker because it is easier, cleaner, and looks nicer) If you don't want to use 4 pens you can take a number 2 pencil and cut a piece about 2 cm long and place it in the cap of the RSVP. If you go for the extra pen you can just take the clicker out and place it in the cap of the RSVP. (I know that a lot of you have spare G2 parts from making MMXs so I suggest the extra G2 piece).
- Last step: Align the center pusher (the pencil piece or the extra clicker) with the top clicker and the bottom clicker, and push the cap firmly onto the back of the G2 body.
There you go, a wonderful little retractable spinner! *Click Click* *Click Click*
Statistics:
Length: 18.5 cm
Diameter of barrel:about 1 cm
Location of COP: 9.2 cm from front, 9.3 cm from back
Weight: Slightly lighter than an Mx
Advantage:
Balanced
Pens are pretty easy to access or trade for (for most people)
Retractable!
Disadvantage:
A little time consuming and difficult to make (because of cutting)
If you cut the middle G2 clicker to about 1/2 the length and shove the RSVP cap farther onto the G2 body, the mod is much more stable, but a bit shorter. Still, a great pen mod for taking to school since it writes with G2 ink and can be made to not be too flashy. -
Date: Sun, Oct 14 2007 19:58:44QUOTE (sketching @ Oct 14 2007, 02:29 PM) <{POST_SNAPBACK}>RSVG2 by SubParSpinner
If you cut the middle G2 clicker to about 1/2 the length and shove the RSVP cap farther onto the G2 body, the mod is much more stable, but a bit shorter. Still, a great pen mod for taking to school since it writes with G2 ink and can be made to not be too flashy.
Do you have any pictures of it? -
Date: Sun, Oct 14 2007 20:03:09
-
Date: Sun, Oct 14 2007 20:06:05
Looks nice ill make it once i can go get me some rsvps *evil laug* Or steal from friends
-
Date: Mon, Oct 15 2007 04:29:39
I came across this, but the pics aren't up anymore.
P.g2.c, [g2]
http://s15.invisionfree.com/UCPSB/index.php?showtopic=606
His v.2 is listed, but the link doesn't work.
Does anyone have more info on this particular mod? -
Date: Mon, Oct 15 2007 05:08:48
http://web.archive.org/web/*/http://turtlespin.rbhscsf.org
Click on any of the links should take you to the old turtlespin pages -
Date: Sun, Oct 28 2007 05:35:37
Is there anything i can do with gripless profiles, G2's RSVP's and signo's?
-
Date: Sun, Oct 28 2007 15:47:33QUOTE (KinXiom @ Oct 28 2007, 01:35 AM) <{POST_SNAPBACK}>Is there anything i can do with gripless profiles, G2's RSVP's and signo's?
any-x's with profiles. r2sg2vp's with g2 and rsvp. -
Date: Sun, Oct 28 2007 19:37:34
if u want a very stable mod make the R²SG2VP, for a clean and good looking pen that spin's alright makea Any-X for the G2 and RSVP. Or just make a RSVP MX.....
-
Date: Mon, Oct 29 2007 00:33:46
kinx u can also make mmx
-
Date: Tue, Oct 30 2007 01:08:09
is there a mod you can make with these pens
Note: I dont have an exacto knife. I dont have an rsvp or nor can i get one i need to make one with the pens i have now
(2) Pilot G2
(1) Papermate Profile
Papermate Eagles "just like bic round sticks"
(3) Pilot G2 grips total
i already made a BICtory (but with a papermate eagle)
ty -
Date: Tue, Oct 30 2007 02:18:27QUOTE (Da Artist @ Oct 29 2007, 06:08 PM) <{POST_SNAPBACK}>is there a mod you can make with these pens
Note: I dont have an exacto knife. I dont have an rsvp or nor can i get one i need to make one with the pens i have now
(2) Pilot G2
(1) Papermate Profile
Papermate Eagles "just like bic round sticks"
(3) Pilot G2 grips total
i already made a BICtory (but with a papermate eagle)
ty
ugh...
your own version of an Any-X... a G2 with the tiwty sides conencted and g2 grips on the end
What cant you buy RSVP's? Your i n the USA -
Date: Tue, Oct 30 2007 02:24:10
I've got a few G2s a few RSVPs a few bic round sticks and a few of the bic grip round sticks. What can i make with these? i'm broke and cant afford to buy anything else unless its under 2-3 dollars. i've already made a BICtory and an extended BICtory, and i definitly need something heavier. thanks
-
Date: Tue, Oct 30 2007 02:28:05
You can try double capping a RSVP, or make a MX/MMX if you ever get your hands on a signo tip.
-
Date: Tue, Oct 30 2007 02:28:14
@Merlin: RSVG2
-
Date: Wed, Nov 7 2007 02:51:37
what about pentel color twins pens?
-
Date: Wed, Nov 7 2007 19:50:59
...well we use color twins sometimes for dr.ct...if alone...make it like a Tombow mod...
-
Date: Thu, Nov 8 2007 10:34:54
I've got a problem. i live in malaysia, a country that does not sell RSVPs in its stores. So since I struggled to get two from a friend of a friend, i wanna make them count. What mods would be good to make with them?
-
Date: Thu, Nov 8 2007 10:58:42
I'd suggest a real MX, with HGG grip and tip, and an AMMX or NX MMT.
-
Date: Thu, Nov 8 2007 22:03:41
Are there any mods can be made with a Triplus Rollerball Fineliner?
-
Date: Thu, Nov 8 2007 22:57:44
ok so me and my friend jose were talkin about pens today. then he brought out 2 g2s and ask if i knew how to make a mod with them. i told him no and then he said... is there a way to take the black part off of the back and connect the two barrels to make a long single sided retractable.
This is a great idea but i dont really know how... Any mega modders wanna help? -
Date: Thu, Nov 8 2007 23:29:32
This mod has already been done before. You basically take 2 G2s, and completely disassemble the first one, and take the 2nd one and take the clip and color band off. Sand down the plastic of where the color band used to be. With the G2 you disassembled, wash out the ink, and cut it to extend the inktube of your G2 that is sanded down. Then you just extend the inktube, and put the back part of the disassembled G2 onto the sanded G2's body.
-
Date: Fri, Nov 9 2007 00:24:02
u can dbl cap it and put grips on it like anyother pen...
or make ur own mod^^ -
Date: Fri, Nov 9 2007 01:57:09
The Wiki has an article that talks about removing the G2 clip band.
The RSVG2 uses the G2 body along with an RSVP cap.
UPSB Wiki Category: Mods using Pilot G2 -
Date: Sun, Nov 11 2007 22:56:15
http://www.putfile.com/pic.php?img=7064621
AND
http://www.putfile.com/pic.php?img=7064541
I know its kinda hard to see each one, but you cans ee the grips, tips, etc.. -
Date: Sun, Nov 11 2007 23:06:20
I had a zebra hyper jell .7 and my friend had mentioned to me at one point that he had seen a mod for it
if anyone knows about it, could I please get some information on it
it's a fairly nice pen so i dont' want it to just go to waste -
Date: Thu, Nov 15 2007 08:54:34
here you go..
http://www.upsb.info/wiki/index.php/Catego..._using_Pilot_G2 -
Date: Fri, Nov 16 2007 07:14:09
Anything i can do with a Uni-ball Mitsubishi Alpha Gel Pencil?
-
Date: Sat, Nov 17 2007 00:03:01QUOTE (Martin @ Nov 16 2007, 01:14 AM) <{POST_SNAPBACK}>Anything i can do with a Uni-ball Mitsubishi Alpha Gel Pencil?
Not really, If you gave me some time, I could prolly come up with something creative, but it'd generally be a negative on the mod chart -
Date: Sat, Nov 17 2007 00:37:31
Hey guys i was just wonderin and i think they are pretty good weight but is there anything or anyway to make something out of bic grip pens or use something from them to make a kool mod ? like double sided or something? IVe been experimenting withit but cant find a way, help... -.-
-
Date: Sat, Nov 17 2007 00:47:59
i typed "bic grip" in the search bar and found a thread on ucpsb called BicGripVortex
try it yourself.
@k4s, there's no page on wiki that mentions bic grip, please make sure it's actually there before recommending to use the wiki. -
Date: Sat, Nov 17 2007 01:31:25
i have:
1 Uni Lakubo
1 Pilot G2
1 Uni-ball signo dx
heaps of Uni-ball signo 0.8s (just copying what it says)
2 papermate dynagrips
an officeworks pen similar to a pilot g2 except the ink tube is thinner
plenty of grips from studymate pens that i've been taking off
and plenty of studymate pens
so... what mods can i do with those pens? i really want a pen mod and i don't think i'm near shopping for pens anytime soon... maybe until the back-to-school sale is on again...
-
Date: Sat, Nov 17 2007 12:50:10
what can i make with papermate kilometrico pens?
-
Date: Sat, Nov 17 2007 13:36:06QUOTE (-JC- @ Nov 11 2007, 06:06 PM) <{POST_SNAPBACK}>I had a zebra hyper jell .7 and my friend had mentioned to me at one point that he had seen a mod for it
if anyone knows about it, could I please get some information on it
it's a fairly nice pen so i dont' want it to just go to waste
You can make a G3 Hypergel mod, WTH made it at ucpsb, it's a nice pen, but I don't use it.
-
Date: Sat, Nov 17 2007 14:06:06QUOTE (random person @ Nov 17 2007, 11:50 PM) <{POST_SNAPBACK}>what can i make with papermate kilometrico pens?
read Bictory tutorial and copy that using papermate kilometrico -
Date: Sat, Nov 17 2007 22:53:14QUOTE (SilentAzn @ Nov 16 2007, 07:31 PM) <{POST_SNAPBACK}>i have:
1 Uni Lakubo
1 Pilot G2
1 Uni-ball signo dx
heaps of Uni-ball signo 0.8s (just copying what it says)
2 papermate dynagrips
an officeworks pen similar to a pilot g2 except the ink tube is thinner
plenty of grips from studymate pens that i've been taking off and plenty of studymate pens
so... what mods can i do with those pens? i really want a pen mod and i don't think i'm near shopping for pens anytime soon... maybe until the back-to-school sale is on again...
You can make a Lakubo AMMX if those Signo's have tips, (some don't, and are the plastic tips)
As for the Dynagrips, you could come up with a jerry-rigged Any-X type of thing. it'd be hard, but entirely possible.
As for the last couple pens...rather useless. pass on those usually. I say just go for the Lakubo AMMX or MMT -
Date: Sun, Nov 18 2007 03:07:30
okay... how do i make a lakubo ammx or mmt?
-
Date: Sun, Nov 18 2007 03:17:19QUOTE (SilentAzn @ Nov 17 2007, 10:07 PM) <{POST_SNAPBACK}>okay... how do i make a lakubo ammx or mmt?
lakubo ammx is just a lakubo mmx with an anyball grip I suppose, mmt is MMX. -
Date: Sun, Nov 18 2007 03:30:41
actually... i did read the wiki with no idea where to read >_<
do i just swap the RSVP grip with some other grip and the pilot supergel/neogel with whatever cap that fits? >_< -
Date: Sun, Nov 18 2007 03:39:30
I added a link in Zombo's post to the Lakubo MMX article, go read that article. After making the Lakubo MMX, add an Anyball, Profile or Star Gels Max grip over the front of the pen mod.
-
Date: Sun, Nov 18 2007 05:31:24QUOTE (WhiteFang @ Nov 18 2007, 01:06 AM) <{POST_SNAPBACK}>read Bictory tutorial and copy that using papermate kilometrico
but kilometricos aren't open double sided -
Date: Sun, Nov 18 2007 23:09:04
G2 vortex
-
Date: Mon, Nov 19 2007 07:23:01
is Zombo's Lakubo MMX's article the link that you gave me? 'cos if it is, i can't find the link
-
Date: Mon, Nov 19 2007 14:52:12QUOTE (Zombo @ Nov 17 2007, 10:17 PM) <{POST_SNAPBACK}>
click the underlined words. -
Date: Tue, Nov 20 2007 07:34:33
ahh... now then i read properly
although i asked if i swap the RSVP grip and the Pilot Neogel/supergel because i don't have them -
Date: Wed, Nov 21 2007 20:58:21
Any good mods with the RSVP Retractable?
I can't seem to find any -
Date: Thu, Nov 22 2007 10:35:29
rsvp.
made a mx, mx^2
anything else? -
Date: Thu, Nov 22 2007 11:58:10
What can i do with Colorgel
-
Date: Thu, Nov 22 2007 13:16:22
what can i do with rsvp,uni lakubo,anyball..help me
-
Date: Thu, Nov 29 2007 20:57:56
i was just wondering what mods i can make with the tombow playcolor pens? btw theres something wrong with the ..what mods can i make with what pens.. so i posted my quesiton here instead
-
Date: Thu, Nov 29 2007 21:00:51
You can make the... PlayColor2 Mod!!
There already is a thread about this even, right here. -
Date: Thu, Nov 29 2007 21:08:01
oh cool thanks a lot, hmm pen sure looks ridiculously long though xD
-
Date: Fri, Nov 30 2007 04:02:04
what's wrong with the other thread, why couldn't you use it?
-
Date: Fri, Nov 30 2007 06:32:12
wat can i make with just hggs?
-
Date: Fri, Nov 30 2007 08:08:10
The hgg stabilizer by Lord Bojo. You could look for the link to the uploaded word document on UCPSB or you could look at it on UPSB v2 (must know the password). Alternatively, if you had a g2 as well you could make the hgg2-se (there is an article in the magazine with a tutorial).
-
Date: Fri, Nov 30 2007 14:57:48
Ummm...... is there any mod I can make with pilot super grip? probably not, but hell, why not ><
still haven't found RSVP's in Israel..... and the quest continues...... -
Date: Fri, Nov 30 2007 15:11:53QUOTE (QuestionMark @ Nov 30 2007, 08:57 AM) <{POST_SNAPBACK}>Ummm...... is there any mod I can make with pilot super grip? probably not, but hell, why not ><
still haven't found RSVP's in Israel..... and the quest continues......
With Just a Pilot Supergrip...not really. It's more of just using it for the Ballsign mod. IF you want to get creative. You can make RSVG2: http://www.upsb.info/wiki/index.php/RSVG2
and then use the same idea on it and put an eraser at the instead of a push for the mechanical pencil. Just an idea -
Date: Sun, Dec 2 2007 08:31:21
Anyone know what kind of mods I can make with a couple of signos, rsvp bk90s, profiles, bic round stics and grip? o.o;
-
Date: Sun, Dec 2 2007 17:33:07QUOTEAnyone know what kind of mods I can make with a couple of signos, rsvp bk90s, profiles, bic round stics and grip? o.o;
for signo and rsvp i guess you can make an rsvp mx if you can get hybrid gel grips check the wiki, with profiles you can make any-x or just use the grip to add onto something else, and bic round stics just make a bictory or a variation of it like extended bictory, just check out the wiki. -
Date: Sun, Dec 2 2007 17:39:26
YOU, Lyfe can make anything you want. BICtory's, MX'es, what ever, experiment.
-
Date: Sun, Dec 2 2007 17:40:56
What can I make with 1 RSVP and 1 HGG lol I'm joking. But I got 1 signo, 2 bic round stick and whole load of rsvps. Any ideas hmm?
-
Date: Sun, Dec 2 2007 19:45:46
bictory, fake mx
-
Date: Sun, Dec 2 2007 20:04:42
>_< I'm not sure if this is the right thread, but I'm kind of responding to the responses to my question o.o Yeah.. I have:
Some super bic extended mod or something Found it at youtube, uses a rsvp cap, trimmed bic cap, rsvp grip + signo tip. Hate that pen because the balance point is WAY off center, but it looks cool
Bictory
Bictory Extended
My version of bictory extended with 2 bic ultra round stic grip barrels (Size: 24.4 cm)
R2vg2mp or something D: The retractable version of the mod, using 1 g2 upper barrel and the rsvp barrel on bottom
Bictory using a gel pen barrel and 2 rsvp caps
Zebra m-301 extended (Not sure what the real name of this one is)
And something thats like a bictory using gel pens but with really cool grips on the end =3
I'm looking for a good pen with lots of momentum, a bit of weight (atleast heavier than a normal bictory without grip), but not that short. My gel bictory with grips is almost 19 cm, and normally that would be a good size for me but the barrel when the caps are on is only 11cm. The caps get in the way even when i try to do a thumb around (I can still do it, it just feels bad), I already took off the clips =/
All suggestions would be appreciated! =D Thankks
EDIT: BTW I really want to make a Any-x, it looks so awesome xD But sadly I don't think they sell HGGs in Canada, so any suggestions on that too? -
Date: Sun, Dec 2 2007 22:08:13QUOTE (Lyfe @ Dec 2 2007, 03:04 PM) <{POST_SNAPBACK}>EDIT: BTW I really want to make a Any-x, it looks so awesome xD But sadly I don't think they sell HGGs in Canada, so any suggestions on that too?
I'm pretty sure they do sell HGGs in Canada. I've read that they sell them in a store called Grand and Toy.
-
Date: Sun, Dec 2 2007 22:34:17QUOTE (k2thez @ Dec 2 2007, 05:08 PM) <{POST_SNAPBACK}>I'm pretty sure they do sell HGGs in Canada. I've read that they sell them in a store called Grand and Toy.
Are you serious?! =DDD THanksss alot!! I'm going to check there as soon as I can. It's only like a 15 minute drive from my house. If I can get it I can finally make the pens I want to <3 -
Date: Fri, Dec 21 2007 23:10:07
Spoiler:
those.......
thnx -
Date: Fri, Dec 21 2007 23:22:53
How about you give the names of the pens you have?
-
Date: Fri, Dec 21 2007 23:28:16QUOTE (sketching @ Dec 21 2007, 06:22 PM) <{POST_SNAPBACK}>How about you give the names of the pens you have?
2 uniball visions
papermate write vros pen and 2 caps
RSVP without cap
pepermate grip thing
2 blue grips -
Date: Fri, Dec 21 2007 23:41:54
Can the Vision caps fit over each side of the RSVP? If so, you can take off the clips of the Vision, cut one of the grips in half and stick the halves and stick the grips on the ends of the caps. See how the balance is. If it's off-balance, see if you can stick something in one of the caps to balance it, if you want it balanced.
If they don't fit over the RSVP, try putting them on the Write Vros and repeat the above for that pen. -
Date: Sat, Dec 22 2007 00:18:35QUOTE (sketching @ Dec 21 2007, 06:41 PM) <{POST_SNAPBACK}>Can the Vision caps fit over each side of the RSVP? If so, you can take off the clips of the Vision, cut one of the grips in half and stick the halves and stick the grips on the ends of the caps. See how the balance is. If it's off-balance, see if you can stick something in one of the caps to balance it, if you want it balanced.
If they don't fit over the RSVP, try putting them on the Write Vros and repeat the above for that pen.
here is wat i got:)
like it?
-
Date: Sat, Dec 22 2007 04:22:48
Doesn't matter if I like it, what do you think of it? If it feels comfortable to you, go with it, if not, try something different until it does.
-
Date: Sat, Dec 22 2007 15:47:46
i like it,,,i added grips on the ends so it Adds weight and grip for figure 8 and infinity stuff:)
-
Date: Sat, Dec 22 2007 22:32:03
my dad got me theses....not rsvps like he though -.- but wat can i do with these? and they all righ in black ink
they are Roseart SRX -
Date: Tue, Dec 25 2007 02:04:01
does anyone know what i can make with a coulple of leftover hgg bodies? no grips or tips.
-
Date: Tue, Dec 25 2007 21:20:39
what can i do with 10 normal RSVP's and 5 Mini RSVP's?
-
Date: Wed, Dec 26 2007 00:33:56QUOTE (boyboy53 @ Dec 25 2007, 04:20 PM) <{POST_SNAPBACK}>what can i do with 10 normal RSVP's and 5 Mini RSVP's?
well you could order some comssa caps and make a sb vortex or two
and maybe v1s if thats really to your liking
otherwise, ionno what else to make without involving other pens -
Date: Wed, Dec 26 2007 20:15:54QUOTE (boyboy53 @ Dec 25 2007, 01:20 PM) <{POST_SNAPBACK}>what can i do with 10 normal RSVP's and 5 Mini RSVP's?
RSVP V1
RSVP CX http://www.upsb.info/wiki/index.php/RSVP_CX
Double Capped RSVP
Or
Trade and nab your self some HGG's or what ever. -
Date: Tue, Jan 1 2008 06:13:16
What mods could I do with profiles except the AnyX, ARMX, AMMX?
-
Date: Tue, Jan 1 2008 16:32:26
Nothing really. There's not that many mods that use the profile body. Most mods just use the grip. You can always come up with your own mod that uses a profile body.
-
Date: Tue, Jan 1 2008 19:16:07
Okay I'll try to come up with something, thank you!
Edit: But I guess it won't be as nice as what K4s does XD -
Date: Wed, Jan 2 2008 00:31:43
Is there anything I can make with Gel'n Roll Gel pens?
-
Date: Tue, Jan 8 2008 02:34:58QUOTE (random person @ Nov 17 2007, 11:50 PM) <{POST_SNAPBACK}>what can i make with papermate kilometrico pens?
Double cap them and then put G2 grips on the caps.
This was my first mod, btw. -
Date: Tue, Jan 8 2008 04:21:33
Can i do anything with some Profiles, Bic Round stic grip and Dr Grips without the tips?
No BICtories -
Date: Tue, Jan 8 2008 05:28:10
You can make a Any-X with the profiles
You can attempt a double-body dr. grip mod if you have 2 or more Dr. Grips (not really good for spinning, well at least for me)
If you have a RSVP pen, then combine that with the bic stics to make that flexible mx thing (forgot what it was called) -
Date: Tue, Jan 8 2008 07:39:01QUOTE (Martin @ Jan 8 2008, 04:28 PM) <{POST_SNAPBACK}>You can make a Any-X with the profiles
You can attempt a double-body dr. grip mod if you have 2 or more Dr. Grips (not really good for spinning, well at least for me)
If you have a RSVP pen, then combine that with the bic stics to make that flexible mx thing (forgot what it was called)
A Double Body Dr.grip mod? Can u show me the Tut.
and with the Profiles, dont u need a G2 for an Any-X...??
O well. Thx for the suggestions.
-
Date: Tue, Jan 8 2008 22:31:40QUOTE (blugyblug @ Jan 8 2008, 02:39 AM) <{POST_SNAPBACK}>A Double Body Dr.grip mod? Can u show me the Tut.
and with the Profiles, dont u need a G2 for an Any-X...??
O well. Thx for the suggestions.
Dr. 2 tutorial: http://www.upsb.info/forum/index.php?showtopic=1249 -
Date: Wed, Jan 9 2008 21:53:22
Sailor Gel Grips
I just made a Dr. KT and used up the grips.
Are there any other mods that use the other parts? -
Date: Thu, Jan 10 2008 01:12:49
What can I make with RSVP's, Profiles, G2's, and Dr. Grip bodies + Grips?
-
Date: Thu, Jan 10 2008 03:57:58
mmx, ammx, rsvg2(i think thats wat its caled by aries), any-x, maybe a few more, but i forgot
-
Date: Thu, Jan 10 2008 03:58:49QUOTE (Tofu @ Jan 9 2008, 05:12 PM) <{POST_SNAPBACK}>What can I make with RSVP's, Profiles, G2's, and Dr. Grip bodies + Grips?
RSVP CX ( http://www.upsb.info/wiki/index.php/RSVP_CX )
Any-X ( http://www.upsb.info/wiki/index.php/Any-X )
Use the grips on bictory's or on the end of your CX's or what ever really
R^2SG2VP
RSVP V1 ( http://www.upsb.info/wiki/index.php/RSVP_V1 )
RSVG2 ( http://www.upsb.info/wiki/index.php/RSVG2 )
Gave you links just because I feel nice today -
Date: Fri, Jan 11 2008 01:58:26
Is there an HGG tip replacement for Any-X?
-
Date: Fri, Jan 11 2008 02:00:26
Not really, you might get lucky if you find an HGR (the kind without a grip), or maybe a milky gel roller or a Hybrid H2 pen. They all have the same tips as the HGG.
-
Date: Mon, Jan 14 2008 09:43:30
I dont know if this is the right thread or noit but why kind of mod's do you reccomend for a beginner?
-
Date: Mon, Jan 14 2008 22:10:48QUOTE (k2thez @ Jan 10 2008, 08:00 PM) <{POST_SNAPBACK}>Not really, you might get lucky if you find an HGR (the kind without a grip), or maybe a milky gel roller or a Hybrid H2 pen. They all have the same tips as the HGG.
HGR tips are actaully different. They're more rounded and weight a tincy bit more -
Date: Mon, Jan 14 2008 22:26:36QUOTE (iMatt @ Jan 14 2008, 05:10 PM) <{POST_SNAPBACK}>HGR tips are actaully different. They're more rounded and weight a tincy bit more
The HGRs with the grip have rounded tips. I'm pretty sure the ones without the grips have an HGG tip. -
Date: Fri, Jan 18 2008 16:34:31
is this this Jedo for GJH Mod?
-
Date: Fri, Jan 18 2008 16:35:47
HGG barrels?
-
Date: Sat, Jan 19 2008 01:19:14QUOTE (Kazeem @ Jan 19 2008, 01:34 AM) <{POST_SNAPBACK}>is this this Jedo for GJH Mod?
yea..that looks the same as the jedo 0.5mm -
Date: Sun, Jan 20 2008 20:46:30
what can i do with dr grip pencils (2) and 8 anyball profiles???
-
Date: Sun, Jan 20 2008 20:55:55QUOTE (boyboy53 @ Jan 20 2008, 03:46 PM) <{POST_SNAPBACK}>what can i do with dr grip pencils (2) and 8 anyball profiles???
by the dr. grip pencils do you mean teh shaker? if so, then that can be used in dr. kt and the anyball profiles can be used in the any-x or just use the grips as weight for wherever you want them (ex. comssas, hcmx, mx, etc..) -
Date: Sun, Jan 20 2008 21:30:34QUOTE (-JC- @ Jan 20 2008, 03:55 PM) <{POST_SNAPBACK}>by the dr. grip pencils do you mean teh shaker? if so, then that can be used in dr. kt and the anyball profiles can be used in the any-x or just use the grips as weight for wherever you want them (ex. comssas, hcmx, mx, etc..)
well...staples didnt have color twins =/ they had something similar...but i dont think it would have worked =/ plus...can i make a bonkura kt out of my comssa? -
Date: Sun, Jan 20 2008 21:34:51
um..i wanna say yes...but i'm not completely sure
comssas and color twins have different caps (i believe) so it wont' fit as well...but you can try)
or ask for someone more knowledgable to reply
-
Date: Sun, Jan 20 2008 21:43:27QUOTE (-JC- @ Jan 20 2008, 04:34 PM) <{POST_SNAPBACK}>um..i wanna say yes...but i'm not completely sure
comssas and color twins have different caps (i believe) so it wont' fit as well...but you can try)
or ask for someone more knowledgable to reply
*sniff* THEY DONT FIT!!!! THE CAP IS TO BIG!!!! *sniff* any alternatives? -
Date: Sun, Jan 20 2008 21:45:11
If the caps are too big, try wrapping some tape around the barrel until the caps fit.
Loose cap attachment @ the wiki -
Date: Sun, Jan 20 2008 21:49:18
nonono...the dr grip tip is to small to fit on the comssa cap
-
Date: Sun, Jan 20 2008 21:53:10QUOTE (boyboy53 @ Jan 20 2008, 04:30 PM) <{POST_SNAPBACK}>well...staples didnt have color twins =/ they had something similar...but i dont think it would have worked =/ plus...can i make a bonkura kt out of my comssa?
Staples would have Colortwins.
tips that fit on Commsa's are signos, and HGGS.
your best off buying a KT from PenWish
Or using the Dr. Grips to make a SARMP mod that K4S made. -
Date: Tue, Jan 22 2008 04:35:53
Spoiler:
What can I do with those? The grip is the enlarged version of the one in the third pic. Sorry for the small pics, u can view them at full size by clickin on them. -
Date: Thu, Jan 24 2008 02:15:17
i just gota monami 153 from a friend was just wondering what i could make with it instead of the monami r rsvp mod because i dont own a dremel or does anyone have any tips for modding it without a dremel?
-
Date: Thu, Jan 24 2008 02:28:37
You can try using a fork, then when you see those white marks, cut off 1-2 mm of the monami tip, so that way you won't need a dremel.
-
Date: Sat, Jan 26 2008 15:46:35
erm what balanced mod can i make with 2 rsvps, 2 anyballs, HGGs, ballsigns, signos
-
Date: Sat, Jan 26 2008 15:59:10
You could try:
- signo-tipping your ballsign (with 2 caps), holding them on with those anyball grips
- double-capping an rsvp, with the clips removed and an rsvp grip in the back cap -
Date: Sat, Jan 26 2008 21:37:04
What could I make with
Pilot G2
RSVP
Bic round sticks. -
Date: Sat, Jan 26 2008 21:49:57
rsvp + g2 => RSVG2
Bics => Bictory (and you could use the g2 grips as well) -
Date: Sat, Jan 26 2008 21:52:01QUOTE (soulsonic @ Jan 23 2008, 09:15 PM) <{POST_SNAPBACK}>i just gota monami 153 from a friend was just wondering what i could make with it instead of the monami r rsvp mod because i dont own a dremel or does anyone have any tips for modding it without a dremel?
haha, i just made one of these today xD
well i used a dremel, but you could try heating a razor blade up and cutting with that (read some of the replies on k4s's tutorial for that mod for some of the stuff concernign using a heated razor blade)
-stuff like the razor blade is gonna be ruined with melted plastic
-smell..?
-one use before you need to reheat it
if you only have 1 razor blade and can't get any more, dont' do this cause it's gonna really ruin it (i think..but then again, i didn't do this so i wouldn't know----read people's comments on that thread)
and if you dont' wanna do that though, just make the monami retr. mod (http://penwish.com/product_info.php?cPath=44_89_93&products_id=468)
it's like the monami r rsvp mx but just with the monami body
that mod's a lot easier to make cause the hole is already there for you -
Date: Sun, Jan 27 2008 03:20:38
Just made the RSVG2. Feels weird.
-
Date: Sun, Jan 27 2008 05:26:02
what can i do with sukura gelly roll
-
Date: Sun, Jan 27 2008 16:11:04
-
Date: Wed, Jan 30 2008 10:56:41
wot mods can i do with RSVP?(+ other pens of course)
pictures plz^^ -
Date: Wed, Jan 30 2008 23:13:11
so is there no use for hggs without tips and grips?
-
Date: Thu, Jan 31 2008 05:39:09
What can I do with.....
1 Dr. Grip
3 Zebra Jimnies
3 Papermate Profiles
3 RSVP's
4 Ultra Bic Stic Grips
1 Sarasa Zebra
2 Pilot G2's
I already have an RSVP CX, Bictory, Z 301-R and an RRMX -
Date: Thu, Jan 31 2008 17:46:36
what mods can I do with sakura gelly roll besides ballsign?
if any.... -
Date: Fri, Feb 1 2008 03:12:37QUOTE (Vall3y @ Jan 30 2008, 03:13 PM) <{POST_SNAPBACK}>so is there no use for hggs without tips and grips?
lies! Clear Comssa -
Date: Fri, Feb 1 2008 03:25:33QUOTE (QuestionMark @ Jan 31 2008, 12:46 PM) <{POST_SNAPBACK}>what mods can I do with sakura gelly roll besides ballsign?
if any....
ballsign kt -
Date: Sat, Feb 16 2008 04:55:15
What can you make with Lakubo,sigma,HGG's and funmatic pens?
-
Date: Thu, Feb 28 2008 03:20:52
What can I make out of
A complete Commsa
Profile
Signo
1 G2 Grip
A ton of RSVPs -
Date: Thu, Feb 28 2008 07:31:03
What mods require a Pilot G1?
-
Date: Sun, Mar 2 2008 19:14:29
What mods can i make with...
RSVP
HGG
G2
Profiles
Comssa's
HGR
Have already made:
Metallic Comssa Retractable
MX
MX^2
Any-X
Anyball Retractable MX
MXSA
Hybrid Comssa MX
RG2T
Bictory
SB Vortex -
Date: Tue, Mar 4 2008 00:13:03
clear comssa?
thats all i can think of off the top of my head -
Date: Tue, Mar 4 2008 00:44:26QUOTE (Missle_Z @ Jan 30 2008, 09:39 PM) <{POST_SNAPBACK}>What can I do with.....
1 Dr. Grip
3 Zebra Jimnies
3 Papermate Profiles
3 RSVP's
4 Ultra Bic Stic Grips
1 Sarasa Zebra
2 Pilot G2's
I already have an RSVP CX, Bictory, Z 301-R and an RRMX
http://s15.invisionfree.com/UCPSB/index.php?showtopic=1129
Profile G2.
I made two of these already. -
Date: Wed, Mar 5 2008 17:11:10
What can I make with HGG barrels, no tips and no grips?
-
Date: Wed, Mar 5 2008 22:53:03QUOTE (Eso @ Mar 5 2008, 12:11 PM) <{POST_SNAPBACK}>What can I make with HGG barrels, no tips and no grips?QUOTE (NoRice4U @ Jan 31 2008, 10:12 PM) <{POST_SNAPBACK}>lies! Clear Comssa
Just get a G2 -
Date: Thu, Mar 6 2008 19:18:52
Is it possible to make a HGG MMX?
-
Date: Thu, Mar 6 2008 20:58:25
I assume it would be, because its the same concept with a clear comssa, just place the cut G2 over. Try it, i would but i dont have G2's.
-
Date: Fri, Mar 7 2008 08:10:38QUOTE (Eso @ Mar 6 2008, 02:18 PM) <{POST_SNAPBACK}>Is it possible to make a HGG MMX?
sorta, look at the sexy HGG Jell Mod here . It comprises of a hgg, zebra jimne gel cap and a g2 barrel over the hgg barrel grip section. -
Date: Wed, Mar 12 2008 00:35:11
I have a whole bunch of zebra z-grips and i dont know what i can make with them.
-
Date: Wed, Mar 12 2008 01:09:01
To be creative... try to somehow connect two of them and make one long retractable mod... Like Treavor's mod. (forgot the name...)
-
Date: Wed, Mar 12 2008 01:34:53
10 minutes later after I posted, I made this.
retractable, 21 cm, inserts possible.
EDIT: Can someone move this to the Show your pens Thread? -
Date: Wed, Mar 19 2008 03:00:55
I found a signo on the ground at school. what can i do with the tip???
-
Date: Wed, Mar 19 2008 03:11:44
...RSVP MX signo tipped?
>_> -
Date: Wed, Mar 19 2008 03:17:30
BICtory, anything with a metal tip.
-
Date: Sat, Mar 22 2008 01:30:56
does anyone know of a pen mod that has all the pens necessary that can be bought in the US (other than BICtory)?
it just fustrates me to see a good pen mod that uses HGG or something like that. 
-
Date: Sat, Mar 22 2008 01:33:14
You could make a signo tipped MX and use a Profile grip. Experiment.
-
Date: Sat, Mar 22 2008 01:35:03QUOTE (Tgz @ Mar 21 2008, 09:30 PM) <{POST_SNAPBACK}>does anyone know of a pen mod that has all the pens necessary that can be bought in the US (other than BICtory)? it just fustrates me to see a good pen mod that uses HGG or something like that.
First off all, you didnt need to start your own thread about this, so i moved it here. Secondly, you can make a substitute rsvp MX but replace HGG tip with signo tip and replace the HGG grip with a profile/G2 grip as nolan suggested.
If you're looking for a double sided mod, then you can even make my SB vortex but instead of using comssa caps just put on rsvp caps for extra weight. -
Date: Sun, Mar 23 2008 06:52:28
Are there any mods that use a papermate flexgrip ultra. I love the feel of the barrel, it just seems short to me and lacks weight.
-
Date: Sun, Mar 23 2008 07:06:44
this belongs in the "what can i do with...", not "quick modifications", but you were close =P
QUOTEAre there any mods that use a papermate flexgrip ultra. I love the feel of the barrel, it just seems short to me and lacks weight.
Grip aviaire (by Banz) -
Date: Mon, Mar 24 2008 21:09:00
What mods can i make with a Pilot Better Retractable Medium? it does have a metal tip btw if that helps
-
Date: Mon, Mar 24 2008 22:06:58QUOTE (Guitrum @ Mar 24 2008, 04:09 PM) <{POST_SNAPBACK}>What mods can i make with a Pilot Better Retractable Medium? it does have a metal tip btw if that helps
HG3R
Good pen, kinda hard to make though. -
Date: Tue, Mar 25 2008 00:44:21
wow. thanks!
-
Date: Wed, Mar 26 2008 10:02:17
i have a dong a anyball and a pentel hgg. and a pentel g2. quantity is no object.. can anyone help me out to make a mod out of these pens?
-
Date: Wed, Mar 26 2008 11:44:27QUOTE (stroud @ Mar 26 2008, 11:02 AM) <{POST_SNAPBACK}>i have a dong a anyball and a pentel hgg. and a pentel g2. quantity is no object.. can anyone help me out to make a mod out of these pens?
With the HGG and the G2 u can do an HGG²-r: Tutorial
with the anyballs and the G2 u can mod a Any-X tutorial
(I'm a retractable fan ^^)
greez, gr3g -
Date: Wed, Mar 26 2008 20:24:09
what are the materials for Dr.KT, i saw the tutorial and it says KeyTo Sign pen, what is the brand name?
and for Dr.Grip, wht is the pen's name, or is the pen called Dr.Grip? -
Date: Wed, Mar 26 2008 20:48:23QUOTE (MacAllie @ Mar 26 2008, 04:24 PM) <{POST_SNAPBACK}>what are the materials for Dr.KT, i saw the tutorial and it says KeyTo Sign pen, what is the brand name?
and for Dr.Grip, wht is the pen's name, or is the pen called Dr.Grip?
The materials for a Dr. KT are:
2 Keityo Sign pens. I think they are made by Pentel Japan.
3 Sailor gels of your choice (original colors are blue, red, and gray)
2 Dr. Grip tips.
The pen's name is Dr. Grip, the company that makes them is Pilot. -
Date: Thu, Mar 27 2008 00:59:26
So will i be able to buy Keityo Sign Pen in North American stores?
or is there any other pen to replace it? -
Date: Thu, Mar 27 2008 01:08:50
replacement body is the dr. st by pholord. it uses all american pens
-
Date: Thu, Mar 27 2008 02:23:29
what r the materials for dr.st then? i searched and there is no match for that
-
Date: Thu, Mar 27 2008 02:55:58QUOTE (MacAllie @ Mar 26 2008, 09:23 PM) <{POST_SNAPBACK}>what r the materials for dr.st then? i searched and there is no match for that
http://www.upsb.info/forum/index.php?showtopic=1117 -
Date: Thu, Mar 27 2008 04:02:25
What can you do with a miffy?
-
Date: Fri, Mar 28 2008 17:02:28
I've been spinning for a while now, and i'd like to start using what you'd probably call a 'real' pen mod, not just a pencil with Blu Tack at either end
Problem is, I can't seem to find many mods that have pens that I can get my hands on easily, and the main reason is the RSVP. It seems to have taken over the modding world, and being in the UK means it is pretty hard to get easily for me, and any other mods I've seen on USPB Wiki have either been stupidly complicated (Hybrid HGG^2 for example) or again have pens I can't readily get, like the Anyball.
So, do any of you guys know any mods, maybe obscure ones that not many people use, that have pens I can buy easily, say from a supermarket or something? I'd prefer a writable mod - I like the look of the retractable ones - but any easy to spin one would be great.
Sgt.Boom
P.S.- I know I can get my hands on G2s and HGGs easily, but appart from that I haven't found any other widely used pens that I can buy. -
Date: Fri, Mar 28 2008 17:20:10
How about the HGG^2 - SE made by MBH?
It uses a HGG and a G2.
But well since you have HGG's you should just trade with someone. -
Date: Fri, Mar 28 2008 17:30:22
Sgt.Boom...moved your post to the appropriate thread. Also, people in north america love HGG but we cant buy them here so you will easily find a trade for rsvp.
-
Date: Fri, Mar 28 2008 20:09:23QUOTE (Frip @ Mar 28 2008, 01:20 PM) <{POST_SNAPBACK}>How about the HGG^2 - SE made by MBH?
It uses a HGG and a G2.
But well since you have HGG's you should just trade with someone.
What is the difference between the HGG^2-SE and the HGG^2? -
Date: Tue, Apr 1 2008 23:39:20
Okay...iam planning on making a new mod...
but i need some help on deciding what mod...
and...i live in Canada so think of some pens that i can get in Toronto, Ontario...
I was Thinking of a Kt or Comssa...but i need some tips from YOU GUYS!
so Suggest on what Mod i should make and the pros and cons about them...
THANK YOU! -
Date: Tue, Apr 1 2008 23:43:27
Haw about an RSVP MX and replace the HGG parts. Or Maybe a RRMMX/RG2T
-
Date: Tue, Apr 1 2008 23:45:37QUOTE (TRoc @ Apr 1 2008, 06:43 PM) <{POST_SNAPBACK}>Haw about an RSVP MX and replace the HGG parts. Or Maybe a RRMMX/RG2T
O i already have a R.S.V.P Mx...
i have a rsvp mx and a custom... -
Date: Tue, Apr 1 2008 23:47:51
Mods are up to the spinner and what they like, heavy or light. Just test around. Sure people could tell you to make this mod or that mod, but it doesnt matter, just try with pens and see what you like.
-
Date: Tue, Apr 1 2008 23:54:36
to my choice...
I prefer...a double tip...about the size of a Kt...not to heavy maybe a bit heavier then a comssa metalic... -
Date: Wed, Apr 2 2008 20:37:22
Mini G2 ?
Pilot SuperGrip ?
Pentel bk437 ? -
Date: Thu, Apr 3 2008 01:15:52
what can i do with PENTEL color pens?
-
Date: Sat, Apr 5 2008 13:37:43
What is the best mods i can make with these:
2 pilot g2s (can get more easily)
1 pentel rsvp (only one i can get)
1 black hgg (only one i can get)
1 anyball grip
i have thought of rsvp mx, rsvp v1, and hgg^2r. anything else?
so far i have a BICtory. thats it.
one more thing: is there a mod u can make from g2s only? or g2s and bics only? -
Date: Sat, Apr 5 2008 14:18:01
dont make an rsvp v1 :\
make an MX
or NX MMT
or MMX - well actually its pretty much useless since u can make a normal mx
i think the best one of these for a noob is an MX
if u arnt a noob make an NX MMT - awesome mod
uses G2, HGG tip, and a whole RSVP
p.s: try to get a signo and use it's tip instead of HGG's tip...
so much cooler...and more balanced... -
Date: Sat, Apr 5 2008 14:25:37
ok thx...and do u have any good inserts? (srry off topic!
-
Date: Sat, Apr 5 2008 14:51:10
http://www.upsb.info/forum/index.php?showtopic=203
Look in here. Inserts. -
Date: Sat, Apr 5 2008 19:51:11
just use:
http://s272.photobucket.com/albums/jj192/PenInserts/
= pretty much all the free inserts... -
Date: Sun, Apr 6 2008 07:50:05
I'm looking for a retractable mod with good momentum, and not the RRMMX cause I already have 2 of those.
I have Profiles, HGR's, HGG's, RSVP's, Bic ultra round stic grip, round stic and click, I have jimnies/hyperjells, G2's,and comssas. -
Date: Sun, Apr 6 2008 13:43:14
Hey Missile srry for butting in but...
i want to good mod with these.
HGG barrel, inktube
4 full g2's
2 black pentel grips
plz help! -
Date: Sun, Apr 6 2008 14:11:02QUOTE (Missle_Z @ Apr 6 2008, 03:50 AM) <{POST_SNAPBACK}>I'm looking for a retractable mod with good momentum, and not the RRMMX cause I already have 2 of those.
I have Profiles, HGR's, HGG's, RSVP's, Bic ultra round stic grip, round stic and click, I have jimnies/hyperjells, G2's,and comssas.
If you think you can do it, try a retractable MSXA!
That'll be a really good mod.
@B3ndythumbs: Sorry.. I can't think of anything
-
Date: Sun, Apr 6 2008 14:16:13
Erm, I have RSVPs, Profiles, a comssa, HGG grips and bodies, but not tips
, and G2 grips and bodies, but not clickers. -
Date: Sun, Apr 6 2008 18:48:40QUOTE (Craeos @ Apr 6 2008, 05:16 PM) <{POST_SNAPBACK}>Erm, I have RSVPs, Profiles, a comssa, HGG grips and bodies, but not tips , and G2 grips and bodies, but not clickers.
u can buy some signo's instead of the HGG tips...
Signo tips FTW
basicly u can do most of the 'normal' cool stuff...
things like RSVP based mod - MX, MX^2, NX MMT, MMX [kinda useless mod IMO - i prefer NX MMT], Vortex, MXSA....etc....
if u like it u can try to make an Any-X [personally dont like the look of it at all...]
metal comssa...etc... -
Date: Sun, Apr 6 2008 18:53:01QUOTE (Craeos @ Apr 6 2008, 10:16 AM) <{POST_SNAPBACK}>Erm, I have RSVPs, Profiles, a comssa, HGG grips and bodies, but not tips , and G2 grips and bodies, but not clickers.
You can make an HGG^2 or HGG^2R. -
Date: Sun, Apr 6 2008 22:10:38
what type of pen should i make? i want something thats heavy but not to heavy.should i try an rsvp MX? what do you think?
so far i only have a bictory
----
Moved post to the pen mod section
-K4S -
Date: Mon, Apr 7 2008 11:13:52QUOTE (angelgirl602 @ Apr 7 2008, 01:10 AM) <{POST_SNAPBACK}>what type of pen should i make? i want something thats heavy but not to heavy.should i try an rsvp MX? what do you think? so far i only have a bictory
----
Moved post to the pen mod section
-K4S
if all u have is bictory by now u should probably make an MX / MX^2
simple, good looking, and spins well in general... -
Date: Wed, Apr 9 2008 02:58:56
whats possible with 1 hyper jell, 1 lakubo, and two laknocks?
if there are other pens required to make that mod thats fine...i just need to do something with those pens
and DONT SAY AYATORI MOD plz..lol
(dont have access to supergels/neogels or g3s) -
Date: Wed, Apr 9 2008 03:00:55
well you can always make the lakubo mmx (i think that's its name =\ ) with the lakubo and a g3 jimnie with the hyper jell (jimnie and hyper jells are the same thing) --i dunno what you can do with the laknocks though -__-''
edit: what can i do with a dr. grip shaker mp mechanism??? -
Date: Wed, Apr 9 2008 19:12:41
You could make K4S's sunburst mp thing with a dr. grip shaker mechanism
-
Date: Wed, Apr 9 2008 19:16:54QUOTE (CaliMartinio @ Apr 9 2008, 03:12 PM) <{POST_SNAPBACK}>You could make K4S's sunburst mp thing with a dr. grip shaker mechanism
That requires the American Dr. Grip LTD. -
Date: Wed, Apr 9 2008 19:19:01
ahh my bad
i swear it was with the shaker -
Date: Wed, Apr 9 2008 20:54:57
Anyone no where to get twin art pens for the zig mod???
And what can i do wit pentel color pen -
Date: Wed, Apr 9 2008 21:44:01QUOTE (CaliMartinio @ Apr 9 2008, 03:19 PM) <{POST_SNAPBACK}>ahh my bad
i swear it was with the shaker
It does use the shaker, but the american one, not japanese. -
Date: Thu, Apr 10 2008 00:28:30QUOTE (nolan @ Apr 9 2008, 02:16 PM) <{POST_SNAPBACK}>That requires the American Dr. Grip LTD.
The greatest pen ever made, what else can I do with it. -
Date: Sat, Apr 12 2008 01:05:28
I have 4 g2s, 4 papermate profiles, 2 rsvps, 1 hgg tip.
I want something not too hard to make, a guide would be very much appreciated. -
Date: Sat, Apr 12 2008 03:53:27
The simplest thing to make would me an mx with a profile or G2 grip.
and for the tuorial: http://www.upsb.info/forum/index.php?showtopic=1294 -
Date: Sat, Apr 12 2008 15:38:21QUOTE (XCel @ Apr 11 2008, 09:05 PM) <{POST_SNAPBACK}>I have 4 g2s, 4 papermate profiles, 2 rsvps, 1 hgg tip.
I want something not too hard to make, a guide would be very much appreciated.
Also you could make: MMX, NT MMX, Any-X, RSVG2, RG2T
Some of these are a little difficult to mod (involves cutting of barrels), but they are all great mods. -
Date: Sun, Apr 13 2008 04:25:22
I need help to make a pen mod in Sinapore
-
Date: Sun, Apr 13 2008 05:10:32
all of darkarcher's mods, zig stick, ballsign, HGG jell mod without importing. use the search
-
Date: Sun, Apr 13 2008 05:14:48QUOTE (jm200808 @ Apr 13 2008, 12:25 AM) <{POST_SNAPBACK}>I need help to make a pen mod in Sinapore
Merged with this thread.
Next time, ask in the shoutbox first and then if you need to post do it in the correct thread. -
Date: Mon, Apr 14 2008 21:30:06
Would a miffy marker cap fit onto a msxa? like can it be a replacement of a dong a computer sign pen?
cause iam gonna make a pure blue msxa...but...with a dong a : black, yellow and white cap.... not a good choice
so would it fit?
isnt a dong a computer sign pen and a miffy marker have the same barrels? -
Date: Mon, Apr 14 2008 21:43:58QUOTE (Koopa @ Apr 14 2008, 04:30 PM) <{POST_SNAPBACK}>Would a miffy marker cap fit onto a msxa? like can it be a replacement of a dong a computer sign pen?
cause iam gonna make a pure blue msxa...but...with a dong a : black, yellow and white cap.... not a good choice
so would it fit?
isnt a dong a computer sign pen and a miffy marker have the same barrels?
The M&M cap would have too larg of a diameter. M&M caps are longer and thicker than dong-a comssa caps. Comssa barrels are thinner thanh M&M barrels. Also, I don't think HGG tips can be screwed onto a M&M cap. -
Date: Mon, Apr 14 2008 21:51:41QUOTE (Outlander @ Apr 14 2008, 04:43 PM) <{POST_SNAPBACK}>The M&M cap would have too larg of a diameter. M&M caps are longer and thicker than dong-a comssa caps. Comssa barrels are thinner thanh M&M barrels. Also, I don't think HGG tips can be screwed onto a M&M cap.
K thanks... -
Date: Tue, Apr 15 2008 10:00:29
I got 2 G2, got any mods on it??
-
Date: Tue, Apr 15 2008 12:09:49QUOTE (jm200808 @ Apr 15 2008, 06:00 AM) <{POST_SNAPBACK}>I got 2 G2, got any mods on it??
I can't think of anything with just G2 parts. what other pens can you get? -
Date: Thu, Apr 17 2008 22:49:25
I got 2 signo tips. what should i make out of it?
-
Date: Thu, Apr 17 2008 22:52:23
If you have extra Keityo bodies with the small caps make a Simple KT Bictory (by K4S) using signo tips on the caps as weight. Otherwise, I'd go for signo tipping a Ballsign or comssa (held on with grips).
-
Date: Thu, Apr 17 2008 23:05:53
haha ive never even held a keityo pen... so i think ill tip my bictory cuz i love it so much!!!
-
Date: Thu, Apr 17 2008 23:16:50
Yeah, you coul use them to tip any double sided mod, or signo tip 2 MXs for better balance
-
Date: Fri, Apr 18 2008 00:13:51
how bout good ol' "bictory?
-
Date: Fri, Apr 18 2008 00:27:34
meh, i already have my bictory efx so im good for right now
-
Date: Sun, Apr 20 2008 19:03:52
I have
>RSVPs
>G-2s
>Profiles
>a ton of Bic sticks
i am looking to make something retractable.
any advice? -
Date: Sun, Apr 20 2008 19:08:17
RG2T
-
Date: Sun, Apr 20 2008 19:11:11QUOTE (nolan @ Apr 20 2008, 12:08 PM) <{POST_SNAPBACK}>RG2T
yes, deffinately that. great pen and great to spin. here is a tutorial on how to make it and it even has some inserts for you to use. just recolor then in Paint to the color scheme you want and it works fine:
http://www.upsb.info/wiki/index.php/RG2T -
Date: Sun, Apr 20 2008 19:15:21
Very awesome mod =D it looks perfect!
(ill pass on the inserts though I'm a graphic designer in training so ill make one do you know the size of the insert for it?) -
Date: Sun, Apr 20 2008 19:20:03QUOTE (Acidic @ Apr 20 2008, 12:15 PM) <{POST_SNAPBACK}>Very awesome mod =D it looks perfect!
(ill pass on the inserts though I'm a graphic designer in training so ill make one do you know the size of the insert for it?)
whenever i make one, i just print out the inserts and cut them to the size i need so no, sorry... -
Date: Tue, Apr 22 2008 07:14:03
lookin for some good challenges.
i got
Bics X 10
Bic Bu^2 X 10
Profiles X8
Rsvp X15
HGG X7
Pentech Sparklers X12
G2's X 7
Dr. Grip Mechanical Pencils X2
Comssa X1
Unibal Signos X5
Retractable Signos X3
Pentel Stick Gel X 4
Zebra 301 X2 -
Date: Tue, Apr 22 2008 07:16:39QUOTE (Housetek @ Apr 22 2008, 12:14 AM) <{POST_SNAPBACK}>lookin for some good challenges.
i got
Bics X 10
Bic Bu^2 X 10
Profiles X8
Rsvp X15
HGG X7
Pentech Sparklers X12
G2's X 7
Dr. Grip Mechanical Pencils X2
Comssa X1
Unibal Signos X5
Retractable Signos X3
Pentel Stick Gel X 4
Zebra 301 X2
dude, first of all, HOW LOADED ARE YOU?!?!?!?!?!?!?!?!?
wtf you have like an entire warehouse of pens in like, 3 days!!!!!
second of all, make a bunch of mx's. some with hgg tips, some with signo tips
maybe some msxa's?
idk, its all up to you dude
-
Date: Tue, Apr 22 2008 07:20:01QUOTE (Guitrum @ Apr 22 2008, 03:16 AM) <{POST_SNAPBACK}>dude, first of all, HOW LOADED ARE YOU?!?!?!?!?!?!?!?!?
wtf you have like an entire warehouse of pens in like, 3 days!!!!!
second of all, make a bunch of mx's. some with hgg tips, some with signo tips
maybe some msxa's?
idk, its all up to you dude
I get bored at work and like to online shop haha.
Yea i got enough Mx's and stuff
lookin for harder mods to do, maybe some unique retractables or somthing.
-
Date: Tue, Apr 22 2008 07:24:20
i think you and i should trade. you have alot of stuff, and i need the stuff you have!
-
Date: Tue, Apr 22 2008 13:01:59
stay on topic.
-
Date: Wed, Apr 23 2008 07:10:38
i was just wondering
since malaysia is one crap place dat doesnt sell any uber pens
are there any mods for G3?
i saw one on penwish.com but im nt too sure how to mod it
if theres anyone who could lend a hand i wud b thankful
=D -
Date: Wed, Apr 23 2008 07:21:17
HG2G3 - A European Substitute for RSVP
HG2G3 by Outlander
I Have made this one, and currently this is my fave mod.
Because indonesia is same liek your country... lack of modding material. -
Date: Thu, Apr 24 2008 02:46:48
Hi, What can I do with 4 RSVPs, 2 papermate flexgrip elites, and 2 zebra sarasa? Thanks in advance.
-
Date: Sat, Apr 26 2008 00:53:59
1 crayola jell thing (green)
1 Profile 1.4b (red)
1 Pentel HyperG (blue)
1 rsvps -
Date: Tue, Apr 29 2008 13:23:08
Im new to modding and im wondering what mods can i do with a twistable color pencil?
-
Date: Tue, Apr 29 2008 14:26:10
u guys could make
rsvp mx/v1/v2
get some g2's and you can make better pens. or more hggs -
Date: Sat, May 3 2008 15:10:25
http://www.badongo.com/pic/3502051
got some new pens Thursday and wondering what mod I could make from them -
Date: Sat, May 3 2008 18:00:27
What to do with:
2 RSVP
3 Sailors
5 Comssas
Anyball Grips
2 Ballsigns
3 Dr.Grip Grips
??? -
Date: Sat, May 3 2008 18:39:10QUOTE (Lasse @ May 3 2008, 10:00 AM) <{POST_SNAPBACK}>What to do with:
2 RSVP
3 Sailors
5 Comssas
Anyball Grips
2 Ballsigns
3 Dr.Grip Grips
???
Comssas, SB vortex, ballsign mods -
Date: Mon, May 5 2008 13:30:26
What can you do with pilot pens? Only pilot pens.
-
Date: Thu, May 8 2008 21:42:55
What can i do with bic velocity and zebra jimnie thx
-
Date: Fri, May 9 2008 09:51:35
what mods can i do with pilot pens available in singapore
www.pilotpen.com.sg -
Date: Fri, May 9 2008 12:55:01
What can I do with Flexgrips (no Grip Aviaire) ???
-
Date: Sun, May 11 2008 07:58:50
What pen mods can i make with 3 uniball signo pens?
-
Date: Mon, May 12 2008 22:11:59
these are the pens i have to work with:
Dong computer sign pens
HGG
G2
G3
colortwins
RSVP
papermate
gellyrol
these are the mods ive alredy made:
msxa,mx,hgg^2,comssa,flexible mx,ballsign mod, nx mmt,any retractable mx,rsgt2(something like that)
,rsvp vortex,comssa mx,momentum mx
these mods i dont wanna make:
rsvg2,engoblendodx,g2cte
anyone got any tips? -
Date: Mon, May 12 2008 22:19:54
Metyl, make a RSVP MX^2
-
Date: Mon, May 12 2008 22:22:58
ok thx.
-
Date: Mon, May 12 2008 22:23:30
Why did you post the same thing twice?
-
Date: Mon, May 12 2008 22:33:10
yea, there is no need for there to be two of the same posts
-
Date: Tue, May 13 2008 08:17:28
idk why, i just pushed one time, cant i remove it?
-
Date: Tue, May 13 2008 09:05:25QUOTE (Metyl @ May 13 2008, 06:11 AM) <{POST_SNAPBACK}>these are the pens i have to work with:
Dong computer sign pens
HGG
G2
G3
colortwins
RSVP
papermate
gellyrol
these are the mods ive alredy made:
msxa,mx,hgg^2,comssa,flexible mx,ballsign mod, nx mmt,any retractable mx,rsgt2(something like that)
,rsvp vortex,comssa mx,momentum mx
these mods i dont wanna make:
rsvg2,engoblendodx,g2cte
anyone got any tips?
Try a G3 MX!
-
Date: Tue, May 13 2008 11:08:46
what can i do with lakubo pens?
-
Date: Tue, May 13 2008 15:46:58QUOTE (pen_MAKer @ May 13 2008, 01:08 PM) <{POST_SNAPBACK}>what can i do with lakubo pens?
Lakubo mmx: http://www.upsb.info/wiki/index.php/Lakubo_MMX
Lakubo mod : http://www.upsb.info/wiki/index.php/Lakubo_mod -
Date: Tue, May 13 2008 20:20:16
What can i do with miffy & melanie body withou caps ?
-
Date: Tue, May 13 2008 21:22:40QUOTE (Lasse @ May 13 2008, 10:20 PM) <{POST_SNAPBACK}>What can i do with miffy & melanie body withou caps ?
from what i know (not verry much) but i think it has the same body as a colortwin so make a g2cte
-
Date: Tue, May 13 2008 21:27:18
you could make a hybrid comssa mx, or a flexible mx, or mpfx depends if you have any of the parts for thsoe other mods. you could also, if you want jam comssa caps onto it and make a white kt.
-
Date: Tue, May 13 2008 21:34:31QUOTE (APurpleRhino @ Apr 23 2008, 02:10 AM) <{POST_SNAPBACK}>i was just wondering
since malaysia is one crap place dat doesnt sell any uber pens
are there any mods for G3?
i saw one on penwish.com but im nt too sure how to mod it
if theres anyone who could lend a hand i wud b thankful
=D
G3MX, G.J.H., HG2G3 there are plenty of g3 mods
-
Date: Fri, May 16 2008 23:10:15QUOTE (Aries @ Oct 14 2007, 03:12 PM) <{POST_SNAPBACK}>u can make my mod, it uses an rsvp and a g2, its called a R�SG2VP
your mod had already been don its called an rrmmxQUOTE (Lasse @ May 13 2008, 04:20 PM) <{POST_SNAPBACK}>What can i do with miffy & melanie body withou caps ?
flexible mx my personal favorite pen -
Date: Fri, May 16 2008 23:24:46QUOTE (...pankake... @ May 16 2008, 07:10 PM) <{POST_SNAPBACK}>your mod had already been don its called an rrmmx
flexible mx my personal favorite pen
The R^2SG2VP and RRMMX are the same thing. -
Date: Sun, May 18 2008 18:57:18
k, i have a lot of random pens from around my house, so here is my list for you all...
(3) basic round papermate*
(3) uniball VISION
(1) bic round stick
(1) basic bic retractable*
(1) basic bic hexagonal*
(1) SKILCRAFT fine retractable*
(1)Pentel Milky gel roller
(2) unknown round pens (nonretractable)*
(1) unknown ink cartrage*
(1) unknown retractable*
the ones with * I don't know the exact name of, and will edit this with pictures of. -
Date: Wed, May 21 2008 07:23:50
[size="2"][/size]what mods can i do with
(1)Uniball signo
(2)Zebra jimnie
(3)G3
(3)G2
(3)G1 -
Date: Wed, May 21 2008 08:29:58
@Tain: when u say 'random pen' and dont give us pic or something, u understand that we cant help u with that, right?
well since u have bic round stic u can make a BICtory....buy another one or something if u have just one...
and buy papermate profiles / rsvps / G2's in some target/wallmart around ur house....
with these pens u have much bigger variety of pen mods.... -
Date: Wed, May 21 2008 08:42:06
what can i do with
superpirate
hgg
g2
rsvp
g3
g1
comssa ?? -
Date: Wed, May 21 2008 19:02:27QUOTE (Sp4m @ May 21 2008, 03:42 AM) <{POST_SNAPBACK}>what can i do with
superpirate
hgg
g2
rsvp
g3
g1
comssa ??
Metallic comssa, ComPirat, RSVP MX, RSVP MSXA, HGG^2, HGG^R, G3 MX, HCMX. -
Date: Fri, May 23 2008 06:45:50
papermate xtend mechanical pecil
kilometricos
also, what are some good grips to get in australia? has anyone tried those weird foohy kid ones? -
Date: Sun, May 25 2008 23:33:03
What mods can I do with
RSVPs
G2s
Bic Round Stic Grips
Bic Round Stics -
Date: Mon, May 26 2008 00:22:49QUOTE (Thucydides @ May 25 2008, 06:33 PM) <{POST_SNAPBACK}>What mods can I do with
RSVPs
G2s
Bic Round Stic Grips
Bic Round Stics
bictory
extended bictory
semi-extended bictory
RSVG2 http://www.upsb.info/wiki/index.php/RSVG2 -
Date: Mon, May 26 2008 00:31:05QUOTE (BlacknWhite @ May 13 2008, 01:05 AM) <{POST_SNAPBACK}>Try a G3 MX!
mx^2? -
Date: Mon, May 26 2008 00:36:55
Papermate Profile x 6
Sailor Gel x 3 (Without grips)
Retractable RSVP x 2
HGG x 1 (No grip)
Back part of G2 x 1
RSVP x ? (They're in pieces all over the place)
M&M body x 1
Zebra F-301 x 2
Papermate Write Bros. x a billion (Can you do ANYTHING with these? X-D)
Probably some Round Stics and some Papermate Eagles lying around somewhere.
Yeah, preetty sure that's it. -
Date: Mon, May 26 2008 02:29:29
Cyon RSVP? (If u have the G2 Clicker)
Z-301R (Edited, Thanks Missle_Z)
Any-X
All I can really think of... -
Date: Mon, May 26 2008 02:58:05
ive been wanting to make a couple of pens lately but alot of pens are out of my reach, ive managed to make an rsvp mx and a bictory. but for the mx i dont know where the heck i got the tip and grip or what kind of pen they were from. i want to make another one because i didnt put the grip in the cap right but i need to know what pens can substitute for the hgg(doesnt matter if its 2 pens(grip and tip) as long as they can be bought from a local walmart/target or if you know of any other mods that are made from walmart/target please let me know!
-thanks in advance(applies only to good comments/advice) -
Date: Mon, May 26 2008 03:00:13
-
Date: Mon, May 26 2008 04:17:18QUOTE (ChinesePandaMan8 @ May 25 2008, 06:29 PM) <{POST_SNAPBACK}>Cyon RSVP? (If u have the G2 Clicker)
Z-301x (I believe is what it is called)
Any-X
All I can really think of...
I'm pretty sure it's called Z-301R -
Date: Mon, May 26 2008 11:20:18
umm...u can look for the hgg replacements somewhere around this forum...
if u can get a signo around ur house and buy 2 RSVP grips u can replace the HGG
1.5~ RSVP grip = 1 HGG grip
and with a signo tip the MX will be more balanced :]
anyways u can make an Any-X using the pens u can find in a target/ walmart store
u might also try NX MMT using some other tip insted of the HGG [will make the pen probably more balanced]
http://www.upsb.info/forum/index.php?showtopic=1294
here u can check out for hgg grip/tips replacements -
Date: Mon, May 26 2008 13:38:02
Pilot G1?
-
Date: Mon, May 26 2008 21:57:45
Hi guy i'm new and i came from Italy...i only have 2 Pentel Hybrid gel roller k178 and 2 pilot g-2....can i do something????
-
Date: Thu, May 29 2008 02:18:14
Alrighty, what can I do with
2 Profiles
3 Bic Round Stics
2 Pilot Super grips -
Date: Thu, May 29 2008 02:20:50
Besides a bictory? Get a metal tip and RSVP ink, you could make an Any-X
-
Date: Thu, May 29 2008 02:32:02
Mmm, I could get a metal tip but no RSVP ink. They don't sell RSVP's in New Zealand. =/
-
Date: Thu, May 29 2008 02:34:04
hmm, that could be a problem. You could empty out one of the profile inktubes and attach it to the back of the other one to extend the inktube, maybe?
-
Date: Thu, May 29 2008 02:39:58
I guess I could try that.
Another option would be to find out the length of the RSVP ink tube and find one of the size. -
Date: Thu, May 29 2008 02:44:46
Just find a long thin ink tube and adjsut the length until it fits with the retractable mech right.
-
Date: Thu, May 29 2008 02:56:25QUOTE (L7Bandit @ May 28 2008, 09:39 PM) <{POST_SNAPBACK}>I guess I could try that.
Another option would be to find out the length of the RSVP ink tube and find one of the size.
Or just use a Profile inktube with a toothpick to extend it. It works.
-
Date: Mon, Jun 2 2008 21:07:56
hey guys, im new to the boards and fairly new to spinning, i just really wanted to know what mods i am able to make with pens that are attainable in walmart and staples here in the US. I would greatly appreciate it if you guys sent me a couple tuts on the best mods i can make from pens in those stores. thanks!
-
Date: Mon, Jun 2 2008 22:24:33QUOTE (LMac @ Jun 2 2008, 11:07 PM) <{POST_SNAPBACK}>hey guys, im new to the boards and fairly new to spinning, i just really wanted to know what mods i am able to make with pens that are attainable in walmart and staples here in the US. I would greatly appreciate it if you guys sent me a couple tuts on the best mods i can make from pens in those stores. thanks!
If you live in US, I think it could be easy for you to make an RSVP MX (you need 1 RSVP and 1 hgg)
it's a good mod =P -
Date: Mon, Jun 2 2008 22:42:54QUOTE (LMac @ Jun 2 2008, 04:07 PM) <{POST_SNAPBACK}>hey guys, im new to the boards and fairly new to spinning, i just really wanted to know what mods i am able to make with pens that are attainable in walmart and staples here in the US. I would greatly appreciate it if you guys sent me a couple tuts on the best mods i can make from pens in those stores. thanks!
You probably cannot get Pentel Hybrid Gel Grip pens (HGGs) in the store,s but you can make an MX with a Pilot G2 grip and a Uniball Signo metal tip. -
Date: Tue, Jun 3 2008 00:22:33
I've been hearing about Zebra Tapiclips a lot lately. What mods are they used for?
http://yhst-40997485717836.stores.yahoo.ne...i-clip-pen.html -
Date: Tue, Jun 3 2008 20:23:05
I don't think anyone has used them in a mod yet, but the grips look like Hyper Jell subs.
-
Date: Tue, Jun 3 2008 20:35:01
Used in key3 g3 mod
-
Date: Wed, Jun 4 2008 01:37:03
can someone tell me a good mod i can make with a dong a comssa, rsvps, signo gel grip and tip, anyball grips, rsvp grips, and so yea
if u can plz do so -
Date: Thu, Jun 5 2008 14:25:22
some basic mods
sgno tipped rsvp mx with 1 1/2 rsvp grips or an anyball grip to replace the hgg grip
or just double cap a comssa and add grips/tips -
Date: Thu, Jun 5 2008 18:39:28
I like to spin an RSVP in school, but i don't love how it spins. What can i do to make it heavier/spin better, but still look inconspicuous, like a normal pen?
-
Date: Sat, Jun 7 2008 03:41:39
Anything I can do with a bunch a papermate write bros.? :/ I'm don't have much else XD
I do have some bics, but they're not roundstic, except for one XD
And I have on RSVP minus the cap d:
And I would like a pen that can write and looks like a normal pen XD -
Date: Sat, Jun 7 2008 07:21:57
What can i make with a g1?
besides :
-s777 mx
- g1 mx -
Date: Sat, Jun 7 2008 09:55:47QUOTE (uniifirex @ Jun 7 2008, 09:21 AM) <{POST_SNAPBACK}>What can i make with a g1?
besides :
-s777 mx
- g1 mx
You can make an Imag1n, here a tut : http://thefpsb.free.fr/viewtopic.php?t=4006&start=0
It's in french but I'm pretty sure that you could understand with the pictures
It's easy to make it
-
Date: Sat, Jun 7 2008 12:51:15
what can i do with
pentel superb g -
Date: Thu, Jun 12 2008 21:42:35
i need to know what do to with a g3 besides:
G3 MX
Key3 Mod
Saizen Mod
GJH -
Date: Thu, Jun 12 2008 21:54:41
HG3R
-
Date: Sat, Jun 14 2008 00:27:29
yea my HG3R did not work out well..
hahah
anything else to do? -
Date: Sat, Jun 14 2008 00:29:51
g3 mmx.
-
Date: Sat, Jun 14 2008 00:36:18
I have : Dong-A body, RSVPs, anyball grips, Jedo.
Now I want to make a MPFX. Is it possible ? -
Date: Sat, Jun 14 2008 00:38:11QUOTE (ChauTran @ Jun 13 2008, 05:36 PM) <{POST_SNAPBACK}>I have : Dong-A body, RSVPs, anyball grips, Jedo.
Now I want to make a MPFX. Is it possible ?
You need some kind of tip to cover up the jedo tip. But you can. -
Date: Sat, Jun 14 2008 00:43:46
@Look into the sun : I going to use Signo .Is it too big for Jedo's tip ? or possible ?
-
Date: Sat, Jun 14 2008 00:52:17
Its possible but you might have to put more teflon tape on.
-
Date: Mon, Jun 16 2008 15:26:19
Dong-A COMSSA
RSVP colors, regular, metallic, sunburst
Monami 153
Monami Audema
Monami Sign Pen
3000 Plus Pen
Playcolor2
Tombow ABT
G2
Bic's galore
M-301, F-301
Sakura GellyRoll
Dr. Grip
Profile
P205
Signo
HGG -
Date: Mon, Jun 16 2008 15:34:30QUOTE (ChauTran @ Jun 13 2008, 08:43 PM) <{POST_SNAPBACK}>@Look into the sun : I going to use Signo .Is it too big for Jedo's tip ? or possible ?
it's probably possible to make it fit, but like...that thing's gonna be sooo front heavy
so i dunno if you really wanna do that =\
it's probably best just to try to get a hgg tip somehow -.-'' -
Date: Wed, Jun 18 2008 21:09:02QUOTE (ellusion67 @ Jun 13 2008, 08:29 PM) <{POST_SNAPBACK}>g3 mmx.
link to tuto?
i cant find :/ -
Date: Thu, Jun 19 2008 00:42:16QUOTE (uniifirex @ Jun 12 2008, 05:42 PM) <{POST_SNAPBACK}>i need to know what do to with a g3 besides:
G3 MX
Key3 Mod
Saizen Mod
GJH
flexible mx? -
Date: Thu, Jun 19 2008 02:39:17
what can you do with a ballsign except for the ballsign mod
-
Date: Thu, Jun 19 2008 02:44:23
ballsign mx
i think someone has a ballsign mp mx around, but i dont' think a tut is out for it...not sure =\ -
Date: Thu, Jun 19 2008 03:04:19
You can make a ballsign KT, or what -JC- said. There's a ballsign mp mod by tomohiro I believe.
-
Date: Thu, Jun 19 2008 06:05:36QUOTE (-JC- @ Jun 18 2008, 07:44 PM) <{POST_SNAPBACK}>ballsign mx
i think someone has a ballsign mp mx around, but i dont' think a tut is out for it...not sure =\
i do ^^ but idk if u want to read it... it's terribly described so xD
http://www.upsb.info/forum/index.php?showt...=ballsign+mx+mp -
Date: Fri, Jun 20 2008 22:01:27
What can I make with bellcolors?
-
Date: Fri, Jun 20 2008 22:04:28
Anything that u can make with a Comssa, the bellcolor could be subbed for it.
-
Date: Fri, Jun 20 2008 22:05:05QUOTE (PenCell @ Jun 20 2008, 06:01 PM) <{POST_SNAPBACK}>What can I make with bellcolors?
-double cap them
-basically anything you can do with a Dong-A Computer Sign Pen -
Date: Sun, Jun 22 2008 08:53:52
What can i do with lakubos?
-
Date: Sun, Jun 22 2008 09:13:48QUOTE (BlackOut @ Jun 22 2008, 01:53 AM) <{POST_SNAPBACK}>What can i do with lakubos?
if you have access to pilot supergels/neogels you could make a lakubo sg
or if you have access to zebra hyper jells/jimnie jells, signos, and signo knock types
you could make ayatori's version of the lakubo jell mod... -
Date: Sun, Jun 22 2008 11:51:17
Where can I find a way for the Ayatori lakubo jell mod? Sorry if its in the forums somewhere but I searched the whole forum before..
EDIT: okay don't bother i found it... Thanks xxdefinitionxx -
Date: Sun, Jun 22 2008 12:04:53
wat can i do with profiles apart from using grips for other pens
-
Date: Sun, Jun 22 2008 13:08:35
hmm any-x?
-
Date: Sun, Jun 22 2008 18:36:10QUOTE (LoneFang @ Jun 22 2008, 05:04 AM) <{POST_SNAPBACK}>wat can i do with profiles apart from using grips for other pens
You can make the HGG Profile Mod or the HAR. -
Date: Sun, Jun 22 2008 19:03:57QUOTE (LoneFang @ Jun 22 2008, 05:04 AM) <{POST_SNAPBACK}>wat can i do with profiles apart from using grips for other pens
Profile G2. Use the retractable mechanism to make an ARMX. -
Date: Mon, Jun 23 2008 19:49:01QUOTE (Sankaku @ Jun 22 2008, 03:03 PM) <{POST_SNAPBACK}>Profile G2. Use the retractable mechanism to make an ARMX.
What can be made with a Monami Audema? (dont say double cap....because duh.) -
Date: Tue, Jun 24 2008 14:11:57
What can i do with hybrid techinca and hybrid fine 0.4 and 1 rsvp?
-
Date: Wed, Jun 25 2008 23:35:51
Bic Velocity
Papermate Erasemate
Univision -
Date: Sun, Jun 29 2008 12:12:39
what can i make with the following?
2x MonAmi Line ball
2x MonAmi Ti Jell
MonAmi Line Pin
MonAmi Twin Name Pen
Sakura Micron 05
Pilot G2
Pilot Dr Grip
Pilot Super Grip
also, i cant remove the grip off my dr grip >_> -
Date: Sun, Jun 29 2008 13:42:08
What mod can I do with G3s ? I already have a flexible mx, a gjh, a G3 mx and I can't make saizen's mod or key3 mod.
EDIT : ok thanks iamk34n3 -
Date: Sun, Jun 29 2008 18:02:03QUOTE (Myrddin @ Jun 29 2008, 06:42 AM) <{POST_SNAPBACK}>What mod can I do with G3s ? I already have a flexible mx, a gjh, a G3 mx and I can't make saizen's mod or key3 mod.
HG3R -> Hybrid G3 Retractable -
Date: Sun, Jun 29 2008 19:10:07QUOTE (CudOfCow @ Jun 23 2008, 03:49 PM) <{POST_SNAPBACK}>What can be made with a Monami Audema? (dont say double cap....because duh.)
Put the caps on a Monami Plus Pen 3000 body.
I think thats about it. -
Date: Mon, Jun 30 2008 15:17:59
What can i do with this materials?
- Dr Grips
- Tombows
- Comssa
- Pilot G2
- Pilot SuperGrip
Thanks^^ -
Date: Mon, Jun 30 2008 15:36:44
You can make a comssa and a tombow mod. And put dr grip grips on for grip.
-
Date: Mon, Jun 30 2008 15:41:01QUOTE (Jiinn @ Jun 29 2008, 07:12 AM) <{POST_SNAPBACK}>what can i make with the following?
2x MonAmi Line ball
2x MonAmi Ti Jell
MonAmi Line Pin
MonAmi Twin Name Pen
Sakura Micron 05
Pilot G2
Pilot Dr Grip
Pilot Super Grip
Just in case anyone didn't see it, I'll ask again... -
Date: Tue, Jul 1 2008 01:54:01QUOTE (Jiinn @ Jun 30 2008, 08:41 AM) <{POST_SNAPBACK}>Just in case anyone didn't see it, I'll ask again...
Don't know like half of your pens, but with the G2 and the Super Grip, you can make a SG2. -
Date: Wed, Jul 2 2008 01:11:12
What mods are Sunbursts used for?
I know K4S uses it for his mp shaker mod.
I've had a few and one is almost out of ink so i wanna make use of it. :]
And yea I already know the difference between Sunbursts and RSVP's. ;] -
Date: Wed, Jul 2 2008 03:40:39QUOTE (dorian_toy @ Jul 1 2008, 09:11 PM) <{POST_SNAPBACK}>What mods are Sunbursts used for?
I know K4S uses it for his mp shaker mod.
I've had a few and one is almost out of ink so i wanna make use of it. :]
And yea I already know the difference between Sunbursts and RSVP's. ;]
Its used for
sunburst mx
sunburst mmt (forgot the real name)
sunburst nx mmt
vortex w/ sunburst
its like a rsvp so you can make most mods with rsvps with them. -
Date: Fri, Jul 4 2008 22:06:53
does any body know of any mods for a papermate flexigrip??
-
Date: Fri, Jul 4 2008 22:08:22
Grip avaire
-
Date: Mon, Jul 7 2008 01:40:31
what can u make with a bic OTHER than a bictorie?
also what can u make with a dr grip? -
Date: Tue, Jul 8 2008 22:49:57
dr grips could be used for dr kts, ballsigns and thats it i guess
what mod could i make with
dong-a pen
HGR
hybrid jells
namea -
Date: Wed, Jul 9 2008 04:26:11QUOTE (ikore @ Jul 8 2008, 03:49 PM) <{POST_SNAPBACK}>dr grips could be used for dr kts, ballsigns and thats it i guess
what mod could i make with
dong-a pen
HGR
hybrid jells
namea
hrm if you have an rsvp you could make an HCMX
-
Date: Wed, Jul 9 2008 05:07:13QUOTE (blank @ Jul 6 2008, 06:40 PM) <{POST_SNAPBACK}>what can u make with a bic OTHER than a bictorie?
also what can u make with a dr grip?
Does the Dr. Grip have a tip or grip still?
If so, get your hands on some KT parts, such as Keityos, MMs,or color twins, and mod yourself a KT -
Date: Wed, Jul 9 2008 12:17:53
any mods I can make from G1 grip version?
-
Date: Thu, Jul 10 2008 12:19:33
Ok, these are the pens that I can get around here.
G2(I saw them once but might not see them again)
HHG
Profile
Bic Round Stic
Uniball Signo
Pilot Supergrip
Not sure if there are any other pens that I've missed out... Anyways, what mods can I do with those pens?
Other than Bictory(Obviously) -
Date: Fri, Jul 11 2008 18:02:08
Well with 2 profiles, a g2 clicker, and a HGG you can make an any-x.
-
Date: Fri, Jul 11 2008 18:03:16QUOTE (QuestionMark @ Jul 9 2008, 05:17 AM) <{POST_SNAPBACK}>any mods I can make from G1 grip version?
g1 mx and s777 mx -
Date: Mon, Jul 14 2008 23:00:36
What can you make with 2 Dr. Grip Mech Pencil shakers with no tips.
-
Date: Tue, Jul 15 2008 23:55:36
what mods could i make with crayola supertips
-
Date: Wed, Jul 16 2008 00:09:54QUOTE (ikore @ Jul 15 2008, 06:55 PM) <{POST_SNAPBACK}>what mods could i make with crayola supertips
dr st. I've also seen the cap put on the front of an mx. you can use the supertip body for any mod that uses a keiyto, color twin, or m&m body. -
Date: Thu, Jul 17 2008 02:02:28
What mods can i make with a MonAmi Jeller Grip 506
-
Date: Thu, Jul 17 2008 02:10:16QUOTE (Tone @ Jul 16 2008, 10:02 PM) <{POST_SNAPBACK}>What mods can i make with a MonAmi Jeller Grip 506
i don't think there is any known mod that uses that pen o.0..
but it could probably be used as a sub for something..not quite sure what though (lakubo, rsvp, hyper jell? i dunno -.-'' ) -
Date: Thu, Jul 17 2008 02:26:00QUOTE (Tone @ Jul 16 2008, 09:02 PM) <{POST_SNAPBACK}>What mods can i make with a MonAmi Jeller Grip 506
The name is a little familiar, I think I might have seen the pen for sale on pds. -
Date: Thu, Jul 17 2008 03:21:41QUOTE (Escapist1 @ Jul 16 2008, 10:26 PM) <{POST_SNAPBACK}>The name is a little familiar, I think I might have seen the pen for sale on pds.
really o.0..? i just checked...this is the closest thing i found http://penspinstore.com/shop/step1.php?number=891 but it's not a monami jeller grip 506..it's a monami jeller 502 -
Date: Thu, Jul 17 2008 03:36:21
If its the same as a Monami Jellpin or Monami JP503 then its used in the Monami 153s Retract mod
-
Date: Thu, Jul 17 2008 03:38:45QUOTE (Outlander @ Jul 16 2008, 11:36 PM) <{POST_SNAPBACK}>If its the same as a Monami Jellpin or Monami JP503 then its used in the Monami 153s Retract mod
http://www.monamiamerica.com/products/comm...r_grip_pop.html
-that doesn't really look like it could be used in a retr. mod.. =\ -
Date: Thu, Jul 17 2008 04:13:48
-
Date: Thu, Jul 17 2008 04:14:30QUOTE (-JC- @ Jul 16 2008, 10:38 PM) <{POST_SNAPBACK}>http://www.monamiamerica.com/products/comm...r_grip_pop.html
-that doesn't really look like it could be used in a retr. mod.. =\
Yeah those are it
I'm still trying to figure out what you can do with it
-
Date: Thu, Jul 24 2008 02:50:49
Metal tipped G3.
Excluding GJH, and G3 MX. -
Date: Thu, Jul 24 2008 02:53:18QUOTE (Xero @ Jul 23 2008, 07:50 PM) <{POST_SNAPBACK}>Metal tipped G3.
Excluding GJH, and G3 MX.
Flexible MX -
Date: Thu, Jul 24 2008 08:16:42
What mods can i make with these pens?
Pilot G1
Pilot G2
HGGs
Uniball Signos
Papermate Replays
Pilot Supergrip (M)
Pilot Supergrip (F) -
Date: Thu, Jul 24 2008 13:59:14QUOTE (tamttru @ Jul 24 2008, 04:16 AM) <{POST_SNAPBACK}>What mods can i make with these pens?
Pilot G1
Pilot G2
HGGs
Uniball Signos
Papermate Replays
Pilot Supergrip (M)
Pilot Supergrip (F)
You can make an HGG^2 with the G2 and HGG. You might be able to make a s777 mx with the G2 and G1. -
Date: Thu, Jul 24 2008 16:48:36
What can I do with RSVPs, Sunbursts, G2s, and Signos? I also have many of those cheap mechanical pencils from Bic. Are there any good mods for those?
-
Date: Thu, Jul 24 2008 17:20:46QUOTE (Noober @ Jul 24 2008, 09:48 AM) <{POST_SNAPBACK}>What can I do with RSVPs, Sunbursts, G2s, and Signos? I also have many of those cheap mechanical pencils from Bic. Are there any good mods for those?
MX's with the rsvps and sunbursts. Use the g2 grips and the grips from the bic mp. -
Date: Thu, Jul 24 2008 17:26:33
I already have an MX (and a R2GT), and the pencils are these:
. No grips :/ -
Date: Thu, Jul 24 2008 17:33:28QUOTE (Noober @ Jul 24 2008, 10:26 AM) <{POST_SNAPBACK}>I already have an MX (and a R2GT), and the pencils are these: http://www.bicworld.com/images_upload/prod...c_classic_1.jpg. No grips :/
mkay......
If you have hgg tips and a bic cap you can make The Spinmatic by Inhumanelmo -
Date: Thu, Jul 24 2008 17:51:00QUOTE (Noober @ Jul 24 2008, 12:48 PM) <{POST_SNAPBACK}>What can I do with RSVPs, Sunbursts, G2s, and Signos? I also have many of those cheap mechanical pencils from Bic. Are there any good mods for those?
You can make an RSVG2 by SubParSpinner and Stuth: http://www.upsb.info/wiki/index.php/RSVG2 -
Date: Fri, Jul 25 2008 17:01:58
What mod(s) can I make with a Zebra Sasara? I really love this pen and I would like a mod for it.
-
Date: Sat, Jul 26 2008 22:04:20
Planter*'s mod, but I doubt you could find the rest of the pens.
http://annkou2.blog105.fc2.com/blog-entry-299.html -
Date: Mon, Jul 28 2008 02:38:59
I don't understand that...
-
Date: Tue, Jul 29 2008 06:50:30
You take the "Sweet Drop" Pen, tape 2 signo tips to each side, cut up the anyball/profile and zebra sasara grips and put them on.
-
Date: Wed, Jul 30 2008 21:27:22
Any uses for Pentel Sharp P205/Jedo other than GJH and MPFX?
-
Date: Wed, Aug 6 2008 10:48:05
What mod i can do with duraflashes? (sailors)
-
Date: Thu, Aug 7 2008 05:21:16
Duraflashes are just used for their grips. If I am correct, there are currently no mods that use the duraflash body.
However, there is a mod that uses the sailor bodies. It is called "wave revolution." -
Date: Thu, Aug 7 2008 10:09:40
i need to think about duraflash mod;p with using duraflash bodies and other
thanks for this sailor mod... -
Date: Sun, Aug 10 2008 01:24:17
Just got back from Daiso xD
What can I do with the names?
or did I get the wrong ones D:
-
Date: Sun, Aug 10 2008 01:36:52QUOTE (Mikusek @ Aug 7 2008, 06:09 AM) <{POST_SNAPBACK}>i need to think about duraflash mod;p with using duraflash bodies and other thanks for this sailor mod...
You can use the grips on any mod that they will fit onto (like double-sided mods or single-sided depending on the thickness of the barrel/cap you are placing them on)
Mainly they are used as Sailor Substitutes on the Dr. KT mod.QUOTE (dorian_toy @ Aug 9 2008, 09:24 PM) <{POST_SNAPBACK}>Just got back from Daiso xD
What can I do with the names?
or did I get the wrong ones D:
Spoiler:
Those are correct. You can do the Namae Mod (doublecap one barrel, add signo tips, and grips), Neo-Namae Mod, or put the caps on a comssa body for a longer Namae Mod. -
Date: Sun, Aug 10 2008 01:49:02QUOTE (Outlander @ Aug 9 2008, 06:36 PM) <{POST_SNAPBACK}>Those are correct. You can do the Namae Mod (doublecap one barrel, add signo tips, and grips), Neo-Namae Mod, or put the caps on a comssa body for a longer Namae Mod.
Cool thank you so much, Outlander! :] -
Date: Mon, Aug 18 2008 03:41:24
wat mod i can do with sailor ret. body ? not sailor X
-
Date: Thu, Aug 21 2008 20:41:00QUOTE (Kool spinz @ Aug 17 2008, 10:41 PM) <{POST_SNAPBACK}>wat mod i can do with sailor ret. body ? not sailor X
none just use the grips. what mods can i make with jiminie jell? cept ayatori,key3,and kuzu, and blacknwhites g3 mod. -
Date: Sun, Aug 24 2008 04:32:08
wat mod can i do with just 2 ZEBRA.
-
Date: Sun, Aug 24 2008 04:34:28QUOTE (V2D @ Aug 23 2008, 09:32 PM) <{POST_SNAPBACK}>wat mod can i do with just 2 ZEBRA.
Umm, you could make another Zebra? -
Date: Sun, Aug 24 2008 04:36:39QUOTE (V2D @ Aug 23 2008, 11:32 PM) <{POST_SNAPBACK}>wat mod can i do with just 2 ZEBRA.
Double-cap that shit -
Date: Sun, Aug 24 2008 06:06:55
Zebra is a Clicker not a pen with cap(sry for bad English)
-
Date: Mon, Aug 25 2008 08:25:24
What can we do with scheinder slider?
-
Date: Mon, Aug 25 2008 09:31:45
Slider MX
Just like a Rsvp MX... Only with the Schneider Slider...
(Need a HGG though.)
Keep Spinning -
Date: Mon, Aug 25 2008 09:46:24
g3 (with metal tip)
beside g.j.h -
Date: Mon, Aug 25 2008 10:11:42
F1r3Fly's G3 Mod. (lol)
Ok, It's the most popular mod in GPC lately.
It's said to be spun like doublecapped but being only singlecapped.
You would have to read German though... >_>
http://forum.penspinning.de/viewtopic.php?f=8&t=10579
Maybe I can translate (if it hasn't been done yet)...
Keep Spinning -
Date: Mon, Aug 25 2008 10:17:56QUOTE (Anascrash04 @ Aug 25 2008, 05:46 AM) <{POST_SNAPBACK}>g3 (with metal tip)
beside g.j.h
G3MX
Flexible MX
and as for f1r3fly's g3 mod, just put the whole tutorial through google translator and it'll be understandable at least -
Date: Mon, Aug 25 2008 10:38:44
anything to be made with NON-retractable profiles (bodies)?
-
Date: Tue, Aug 26 2008 00:17:05
Hi guys, I'm kinda new and simply the sheer number of pen mods confuses me `-` and then there's the possibilities of subsituting this pen with that blah blah. iono, it just seems too complicated. anyway I copied most of the pens in Staples and this dollar store from where I live and I hope some of you can tell me which mods can be made. ty ^^
Pens
Flow-Rite: Gel, Office Gel, Gel Ink, Writer's Selection, Ballpoint (one of these looks kinda like the Pentel HGG I think?)
Uni-ball: Sharpie, Roller, Jetstream
Bic - Cristal, Pro Gel, Velocity Gel
Pilot - V5, V7, G2, G-TEC, Dr. Grip Gel
RSVP - Ballpoint, the usual
Papermate - Flexgrip, XTend
Zebra - Z-Grip, Ballpoint, Retractable Gel, Sarasa
Sonix - Gel Stick
Opti Flow - Needle Stick, Liquid Roller
Mechanical Pencil
Bic - Grip, Velocity, Click Master
Metrix
Papermate
Zebra - M402
Pentel - P205
Pilot - Dr. Grip LTD, Colour ENO -
Date: Fri, Aug 29 2008 02:19:50QUOTE (Clam! @ Aug 25 2008, 06:38 AM) <{POST_SNAPBACK}>anything to be made with NON-retractable profiles (bodies)?
anyone? -
Date: Fri, Aug 29 2008 03:50:48QUOTE (Clam! @ Aug 28 2008, 10:19 PM) <{POST_SNAPBACK}>anyone?
None that I know of. But retractable Profile bodies can be used to man an Any-X. -
Date: Fri, Aug 29 2008 09:15:53
what pens can i do with other den (HGG^2)
HGG
G2
Uni Laknock
Uniball Signo (RT)
pls advice
here&now -
Date: Fri, Aug 29 2008 23:10:14QUOTE (here&now @ Aug 29 2008, 04:15 AM) <{POST_SNAPBACK}>what pens can i do with other den (HGG^2)
HGG
G2
Uni Laknock
Uniball Signo (RT)
pls advice
here&now
hgg body mmx
-
Date: Mon, Sep 1 2008 17:19:16
It is hard for me to find a Pentel RSVP in Malaysia. However, Bic is easier to find!
Anyway, are there anymore mods that can be modded with Bic pen other than BICtory?
Thanks -
Date: Mon, Sep 1 2008 17:29:36QUOTE (Existant @ Sep 1 2008, 09:19 PM) <{POST_SNAPBACK}>It is hard for me to find a Pentel RSVP in Malaysia. However, Bic is easier to find!
Anyway, are there anymore mods that can be modded with Bic pen other than BICtory?
Thanks
extended bictory?
xD -
Date: Mon, Sep 1 2008 17:36:01
Thanks Anascrash04! I am lazy to search for the tutorial of extended bictory. Maybe I am too sleepy cause it is 1.35AM here right now!
Thanks anyway, dude!
Peace out:) -
Date: Thu, Sep 4 2008 08:18:13
What mods can I make with Miffy and Melanie and those pens with Cartoons on the barrel? (Not meaning with just those 2, just what mods in general, or what the most popular mods are)
Thanks ~ -
Date: Thu, Sep 4 2008 09:10:33
Dr. KT and all its variations. There's more, but I can't think right now.
-
Date: Thu, Sep 4 2008 09:51:29
wat mod i can do with nextage grip ?
-
Date: Thu, Sep 4 2008 10:22:12
This one.
It looks like the retractable version of iNoobs HGG Jell Mod. -
Date: Mon, Sep 8 2008 10:53:07
what mods can i do with these pens?
Bic Ns-Fine
Bic Round Stick Grip fine
BicMatic
Dong-A Anyball
Dong-A My-Gel
Faster Ball Pen
Leone Stylus Ballpen
Monami Line Ball
Mongol Retracto Mechanical Pencil
Panda Ballpen
Pentel Hybrid Gel Roller
Pentel Hybrid Gel Grip
Pentel Textile Marker #Nm10-A
Pilot Better Retractable
Pilot G1
Pilot G2
Pilot G3
Pilot Super Grip
Pilot V5
Pilot V7
Sakura Gellyroll
Sanford Sharpie Sign Pen
Uni-Ball Laknock
Uni-Ball Signo
Uni-Ball Signo Erasable Gel
Zebra Ballpen #Bo4-300
Zebra Name Pen(ComSsa sub) -
Date: Tue, Sep 9 2008 20:29:32
I bought some pens that are tul brand. They are silver, retractable, and are fine ink, good for spinning/writing. I am at school and do not have a picture at the moment. If anyone knows what pen I am talking about, are there any mods I could do with/for this pen?
-
Date: Tue, Sep 9 2008 22:48:21QUOTE (HaRdCoRe-SpInneR-626 @ Sep 8 2008, 03:53 AM) <{POST_SNAPBACK}>what mods can i do with these pens?
Bic Ns-Fine
Bic Round Stick Grip fine
BicMatic
Dong-A Anyball
Dong-A My-Gel
Faster Ball Pen
Leone Stylus Ballpen
Monami Line Ball
Mongol Retracto Mechanical Pencil
Panda Ballpen
Pentel Hybrid Gel Roller
Pentel Hybrid Gel Grip
Pentel Textile Marker #Nm10-A
Pilot Better Retractable
Pilot G1
Pilot G2
Pilot G3
Pilot Super Grip
Pilot V5
Pilot V7
Sakura Gellyroll
Sanford Sharpie Sign Pen
Uni-Ball Laknock
Uni-Ball Signo
Uni-Ball Signo Erasable Gel
Zebra Ballpen #Bo4-300
Zebra Name Pen(ComSsa sub)
Take 2 anyballs and make an Any-X, Take 2 gellyrolls and the supergrip and make a ballsign.
That's just two of the mods you can make. Be creative and try to substitute parts to make other mods.
-
Date: Tue, Sep 9 2008 23:03:36QUOTE (HaRdCoRe-SpInneR-626 @ Sep 8 2008, 06:53 AM) <{POST_SNAPBACK}>what mods can i do with these pens?
Dong-A Anyball
Pilot V5
Pilot V7
Uni-Ball Signo
Zebra Name Pen(ComSsa sub)
DB7 comssa :] -
Date: Fri, Sep 12 2008 23:47:28
does anyone know if i can use the pilot 2020 super grip MP and other pens to make a shaker MP mod? or if there's a link to some shaker mod.
-
Date: Sun, Sep 14 2008 13:36:38QUOTE (Aries @ Aug 30 2008, 07:10 AM) <{POST_SNAPBACK}>hgg body mmx
hey thanks for telling me but.
i cant find the tut.
pls advice(:
here&now -
Date: Sun, Sep 14 2008 13:42:53
@point I don't think there is a mod like that... the only shaker mod i can think of is SAR MP by K4S but it uses Dr.Grip...
-
Date: Wed, Sep 17 2008 09:42:44
i was wondering.. if i have these pens:
RSVP x2
HGG x2
G2 x2
Anyball Profile x2
Dr.Grip x1
Ballsign x2
Super Grip x1
and i make:
RSVP MX
Any-X
Ballsign MOD
what else can i make with the spare parts? @@ -
Date: Wed, Sep 17 2008 11:43:30
Hgg²(-SE)
RSVP MMX
RSVP NX MMT
Any-G -
Date: Thu, Sep 18 2008 03:53:31
what if its...
RSVP x1
HGG x1
Ballsign x2
Super Grip x1
Signo Retractable x1
Lakubo x1
Hyper Jell x1
Signo x2
Dr.Grip x1
to make:
RSVP MX
Ayatori MOD
Ballsign MOD
what else can i make thats... goodie? @@
(i also have extra BICtory which i can use for modding... meaning 1 barrel + 2 heads + 2 caps of BIC round stic) -
Date: Thu, Sep 18 2008 04:12:35QUOTE (HaRdCoRe-SpInneR-626 @ Sep 8 2008, 05:53 AM) <{POST_SNAPBACK}>what mods can i do with these pens?
Bic Ns-Fine
Bic Round Stick Grip fine
BicMatic
Dong-A Anyball
Dong-A My-Gel
Faster Ball Pen
Leone Stylus Ballpen
Monami Line Ball
Mongol Retracto Mechanical Pencil
Panda Ballpen
Pentel Hybrid Gel Roller
Pentel Hybrid Gel Grip
Pentel Textile Marker #Nm10-A
Pilot Better Retractable
Pilot G1
Pilot G2
Pilot G3
Pilot Super Grip
Pilot V5
Pilot V7
Sakura Gellyroll
Sanford Sharpie Sign Pen
Uni-Ball Laknock
Uni-Ball Signo
Uni-Ball Signo Erasable Gel
Zebra Ballpen #Bo4-300
Zebra Name Pen(ComSsa sub)
You can make:
MX
G3MX
HGRMX
DB7 ComSSa sub
Ballsign
Any-X
Retractable X(Monami 153 MX)
HG3R
R2G2
Bictory
just some... -
Date: Sat, Sep 20 2008 23:17:03
Any mods that anybody might have imagined up for Zebra Z-Grip Mechanical Pencils?
I'm thinking an extension mod... Just looking to see if anythings been done with this pencil
I actually made a decent mod out of it:
Spoiler: -
Date: Sun, Sep 21 2008 00:37:28QUOTE (NinjaKai @ Sep 20 2008, 06:17 PM) <{POST_SNAPBACK}>Any mods that anybody might have imagined up for Zebra Z-Grip Mechanical Pencils?
Im thinking an extension mod... Just looking to see if anythings been done with this pencil
The only thing i can see is maybe using it as a HGG grip sub. Otherwise there's not much out there
-
Date: Sun, Sep 21 2008 06:48:34
can sombody tell me the link of the tut for hgg body mmx?
pls advice(:
here&now -
Date: Sun, Sep 21 2008 07:10:38
What mods can I MAKE with "MonAmi COUBER JELLER"
I found it at school.
There's no tip and the entire front part holds the ink but can also screw off.
-
Date: Sun, Sep 21 2008 12:00:59QUOTE (NinjaKai @ Sep 20 2008, 07:17 PM) <{POST_SNAPBACK}>Any mods that anybody might have imagined up for Zebra Z-Grip Mechanical Pencils?
Spoiler:
Im thinking an extension mod... Just looking to see if anythings been done with this pencil
I've made a mod using the pen's tip and grip. It spins sooo nice
Longer than MX and shorter than MSXA.
Any mods I can make with:
1 Dong A Cap
a few RSVPs
1 Zebra F-301
a few signo
G2s
I don't want another MMT or NX MMT... -
Date: Sun, Sep 21 2008 13:50:45
Hi !
I need a good mods with the pen in israel. (I am from israel)
so... who can give me ? in israel we have a...
Pilot SuperGrip (pen)
Pilot BPS-GP (pen)
Pilot V5 (pen)
Staedtler pencils (pencil)
Stabilo excel 828 F (pen)
Erasable Ballpen EB102 (pen)
Plz help me
and sorry on the bad English....
(from the topic http://www.upsb.info/forum/index.php?showtopic=11166) -
Date: Tue, Sep 23 2008 01:54:08
if its...
RSVP x1
HGG x1
Ballsign x2
Super Grip x1
Signo Retractable x1
Lakubo x1
Hyper Jell x1
Signo x2
Dr.Grip x1
to make:
RSVP MX
Ayatori MOD
Ballsign MOD
what else can i make? @@
(i also have extra BICtory which i can use for modding... meaning 1 barrel + 2 heads + 2 caps of BIC round stic) -
Date: Tue, Sep 23 2008 02:59:49
You could make a lakubo jell mod, but its just pretty much an ayatori mod without the grip cut and a signo tip in the cap.
-
Date: Tue, Sep 23 2008 05:37:36QUOTE (dorian_toy @ Sep 21 2008, 12:10 AM) <{POST_SNAPBACK}>What mods can I MAKE with "MonAmi COUBER JELLER"
I found it at school.
There's no tip and the entire front part holds the ink but can also screw off.
That looks like a Hyper Jell sub with a funky cap to me.
-
Date: Thu, Sep 25 2008 01:19:59
can i make a long enought mod thats fairly heavy and cheap with only 2 rsvp note if could message me because i dont know what to do help me somebody
-
Date: Thu, Sep 25 2008 01:35:40QUOTE (rasekan @ Sep 24 2008, 06:19 PM) <{POST_SNAPBACK}>can i make a long enought mod thats fairly heavy and cheap with only 2 rsvp note if could message me because i dont know what to do help me somebody
Uhmm, IF you only have two RSVPs, you can always make a double capped RSVP MX, but I do not recommend it
If you have some HGGs, you can make a RSVP MX or RSVP MX^2 -
Date: Thu, Sep 25 2008 01:40:58QUOTE (rasekan @ Sep 24 2008, 06:19 PM) <{POST_SNAPBACK}>can i make a long enought mod thats fairly heavy and cheap with only 2 rsvp note if could message me because i dont know what to do help me somebody
RSVP CX -
Date: Thu, Sep 25 2008 13:17:12
Signo knock
Signo
g1
Hyper jell
HGG.
Anything? -
Date: Fri, Sep 26 2008 14:05:33
any mod that uses ONLY pilot pens? very general but please help ><
-
Date: Fri, Sep 26 2008 15:13:34QUOTE (here&now @ Sep 21 2008, 02:48 PM) <{POST_SNAPBACK}>can sombody tell me the link of the tut for hgg body mmx?
pls advice(:
here&now
can some body answer me please.
its been overlooked by ppl alot of times.
pls help.
thanks -
Date: Fri, Sep 26 2008 15:24:19
Sorry, I dont know...
Anyone know if there's a mod that uses the body of a Zebra Sasara? -
Date: Mon, Sep 29 2008 01:07:36
I've had a lot of these from when I was a kid xP thats why the grip is a different color.
They look a lot like hyperjell subs.
Close up of cap...
Comparison to HGG
The cap says "GEDDES ez gels =classic=".
Sooo do you think they're good for hyperjell sub?
The cap is about 5.75 cm long and about 1.25 cm wide. -
Date: Mon, Sep 29 2008 07:13:29QUOTE (dorian_toy @ Sep 28 2008, 06:07 PM) <{POST_SNAPBACK}>I've had a lot of these from when I was a kid xP thats why the grip is a different color.
They look a lot like hyperjell subs.
The cap says "GEDDES ez gels =classic=".
Sooo do you think they're good for hyperjell sub?
The cap is about 5.75 cm long and about 1.25 cm wide.
I have one of those...I can't seem to get the grip off though, but if you can, I bet it could be a good sub... -
Date: Mon, Sep 29 2008 22:57:46
I have.
Unlimited ammount of RSVPS
Unlimited ammount of Bics
Unlimited ammount of supertips
10 j- rollers 5 gell pens (possibly hgg tip substitutes)
1 dong -a sign pen
2 monami 153
1 color twin
1 miffy & Melanie Keityo
2 Namae (only 1 cap)
1 purple sailor gel pen
5 Anyball grips (various colors)
7 Dong- a caps and one micilaneious cap that fits tho 0 _ o
2 hgg tips
ANY HELP WUD BE GREAT
I already have to many bictories to count
Comssas
Dr.KT
Mx^2
=] -
Date: Mon, Sep 29 2008 23:02:45
Signo tipped bictory?
-
Date: Mon, Sep 29 2008 23:21:02
hmm maybe ill pu the pens I already ahve no need to make more than one of the same mod > - <
-
Date: Tue, Sep 30 2008 00:57:50QUOTE (shoeman6 @ Sep 29 2008, 06:57 PM) <{POST_SNAPBACK}>I have.
LOTS OF PENS
Comssa metallic with monami153 retract mechanism, Neo-Name mod (sub the negel cap with rsvp), MSXA unsing the J-Roller tips, Namae with Comssa caps (tips too if you want), and probably more that I can't think of now. I'm tired
-
Date: Tue, Sep 30 2008 02:25:08
I made a UK comssa anything else I can make? 0 _ o
-
Date: Tue, Sep 30 2008 22:12:55
I want it to be all black, but dont worry about the barrel, ill just put in an insert.. please help me =] -
Date: Tue, Sep 30 2008 22:16:53QUOTE ((.BC.) David @ Sep 30 2008, 06:12 PM) <{POST_SNAPBACK}>I want it to be all black, but dont worry about the barrel, ill just put in an insert.. please help me =]
If you don't mine making an outsert I would say make a hybrid comssa MX with a G3 cap and HGG grip in the cap. -
Date: Wed, Oct 1 2008 12:29:41
Is Dr. Grip G-Spec good for something?
The left one is Dr. Grip G-Spec grip and tip. Little different from the normal one on the right. -
Date: Wed, Oct 1 2008 12:36:30
You need Grip for Saizens Mod
-
Date: Thu, Oct 2 2008 22:10:17
edit: nevermind didn't ask the right question
-
Date: Fri, Oct 3 2008 02:23:16QUOTE (Tepponab @ Oct 1 2008, 05:29 AM) <{POST_SNAPBACK}>Is Dr. Grip G-Spec good for something?
The left one is Dr. Grip G-Spec grip and tip. Little different from the normal one on the right.
The Dr. Grip G-spec grip and tip are used for Saizen's G3 mod. -
Date: Fri, Oct 3 2008 02:45:46
I need a mod i can make with these pens
x1 Pilot g2
x1 Bic round stic with cap
x2 Bic round stic no cap
x2 Bic clic stic
x2 Bic click stic grip?(looks like a grip)
x1 Uni ball retractable signo
x1 Uni ball non retractable signo cap
x1 Pentel RSVP no cap
x1 Bic velocity 0.7
x1 Papermate flexgrip no cap
I can probably spend $1-2 on pens -
Date: Fri, Oct 3 2008 04:03:42QUOTE (iSpin @ Oct 2 2008, 10:45 PM) <{POST_SNAPBACK}>I need a mod i can make with these pens
x1 Pilot g2
x1 Bic round stic with cap
x2 Bic round stic no cap
x2 Bic clic stic
x2 Bic click stic grip?(looks like a grip)
x1 Uni ball retractable signo
x1 Uni ball non retractable signo cap
x1 Pentel RSVP no cap
x1 Bic velocity 0.7
x1 Papermate flexgrip no cap
I can probably spend $1-2 on pens
With the RSVP and the Pilot G2 you can make an RG2T, It's a great beginner mod.
Here's the Thread http://www.upsb.info/forum/index.php?showtopic=1115 -
Date: Fri, Oct 3 2008 07:20:18
I found a pilot Better Retractable.
Is there any mod other than an HG3R that uses it? -
Date: Fri, Oct 3 2008 09:24:43
People generally sub the pilot better retractable tip for a HGG tip on a MX.
-
Date: Fri, Oct 3 2008 15:25:47
wat mods can i do with uni-ball lakubo, uni-ball lacknock, G1, G3, careras??
-
Date: Sat, Oct 4 2008 18:26:17
a Lakubo MX, using a g3 tip and grip
-
Date: Sat, Oct 4 2008 19:47:10QUOTE (iSpin @ Oct 2 2008, 10:45 PM) <{POST_SNAPBACK}>I need a mod i can make with these pens
x1 Pilot g2
x1 Bic round stic with cap
x2 Bic round stic no cap
x2 Bic clic stic
x2 Bic click stic grip?(looks like a grip)
x1 Uni ball retractable signo
x1 Uni ball non retractable signo cap
x1 Pentel RSVP no cap
x1 Bic velocity 0.7
x1 Papermate flexgrip no cap
I can probably spend $1-2 on pens
uhh you could make a bictory and a rsvp mx -
Date: Mon, Oct 6 2008 22:02:18
what is a good retractable mod with cog near cop
using
3x pentel rsvp
2x pilot g2
1x papermate profile
1x hgg tip substitute -
Date: Mon, Oct 6 2008 22:11:11
mx
-
Date: Mon, Oct 6 2008 22:16:32
He asked for a retractable mod.
Rg2t is good. -
Date: Tue, Oct 7 2008 00:35:11
I've been hearing that this mod is quite light, I'm currently using a rsvp cx and want to upgrade to something that I can write with easily hence retractable
-
Date: Tue, Oct 7 2008 00:41:11QUOTE (wheelson @ Oct 6 2008, 03:02 PM) <{POST_SNAPBACK}>what is a good retractable mod with cog near cop
using
3x pentel rsvp
2x pilot g2
1x papermate profile
1x hgg tip substitute
Well, if you can get your hands on another Profile, you can make an Any-X. It's a nice mod. -
Date: Tue, Oct 7 2008 00:56:28
that actually looks sick man thanks for the reccomendation
-
Date: Wed, Oct 15 2008 11:23:16
Zebra M-301.
Anything else than M-301 X? -
Date: Sun, Oct 26 2008 15:43:50
Which mod can I make with the namae pen? (sorry Zombo for that thread
) -
Date: Sun, Oct 26 2008 18:47:59
you can make the namae mod.
and Idon't know if this is the right place to ask, but it's common knowledge that you can make a heavier MX with more momentum with and RSVP and an HGR, right? -
Date: Sun, Oct 26 2008 18:50:19QUOTE (Scandiacus @ Oct 26 2008, 08:43 AM) <{POST_SNAPBACK}>Which mod can I make with the namae pen? (sorry Zombo for that thread )
uhh namae mod, neo namae, ep comssa, namae body comssa. yeah thats kinda it, or some kind of self mod -
Date: Mon, Oct 27 2008 00:53:48
Hmm... What can I make with
HGG
Profiles
Namae
Pilot Supergrips
I know I can make Any-X and Namae mod, what other mod than those two can I make? -
Date: Mon, Oct 27 2008 02:48:36
Try the HGG Anyball Retractable. Click.
-
Date: Mon, Oct 27 2008 04:15:27
what mod can i do with twin monami name pen...
-
Date: Mon, Oct 27 2008 04:20:22
You can make a G1-TwinNP which is basically taking off the clip and putting grips and tips.
-
Date: Mon, Oct 27 2008 06:14:50QUOTE (iamk34n3 @ Oct 27 2008, 03:48 PM) <{POST_SNAPBACK}>Try the HGG Anyball Retractable. Click.
Thanks for that!
I've just made one but changed a few things around
-
Date: Mon, Oct 27 2008 08:10:33
Ok, so I recently got into pen spinning and I was thinking about get a decent pen to spin with. I looked up some mods and I was like "Hey that seems pretty good" but then I realized that I haven't the large range of pens people in the US and stuff have access to because I live in Australia. So my question is what type of mods I can make with the pens I have access to (only basic pens like papermate and bic pens) that isn't to hard to make for a beginner?
Thanks.
PS: Sorry about the thread/topic I make before, I didn't look around properly before posting. -
Date: Mon, Oct 27 2008 10:19:16
well i live in Australia also you could probably find;
Bictory
LoneFang KT
Any-X(Dong-a Any-balls are called Papermate Profiles in Australia)
Atlant-X
What City do you live in? -
Date: Mon, Oct 27 2008 10:33:53
Sydney. It says on that little profile thing next to my post.
-
Date: Mon, Oct 27 2008 11:08:08QUOTE (Sankaku @ Oct 27 2008, 02:50 AM) <{POST_SNAPBACK}>uhh namae mod, neo namae, ep comssa, namae body comssa. yeah thats kinda it, or some kind of self mod
I can't seem to find stuffs on the "namae mod" even after using the search bar and googling
Can someone provide me the steps/materials needed for the namae mod? Thanks. -
Date: Mon, Oct 27 2008 23:24:32QUOTE (Scandiacus @ Oct 27 2008, 04:08 AM) <{POST_SNAPBACK}>I can't seem to find stuffs on the "namae mod" even after using the search bar and googling
Can someone provide me the steps/materials needed for the namae mod? Thanks.
This is the Namae mod, sold on Penwish:
http://penwish.com/product_info.php?cPath=...products_id=721
It consists of a double-capped Namae pen, Sailor Innovation Gel grips, and two Signo tips.
Here's a construction video from Youtube. It's not in English, but you can get a general idea of how to make it by watching the video. Note that it's not mine, credit goes to the person that made it.
-
Date: Mon, Oct 27 2008 23:49:49
3 miffy bods no caps
3 whole bell colors <--- I really wanna know what I can do with those
Unlimited RSVPS
6 Whole Hggs
10 Whole profiles
RSVP barrels
Any kind of grip (dr grip sailor etc)
Various RSVP parts
3 comssa caps
1 monami153
2 keityo caps
1 namae pen
1 namae pen barrel
2 donga comssa pens
Unlimted G2's and Bics
(I already have COmssa mod, and mx and mx^2 and DR KT)
pleasepleasepleaseee?=D -
Date: Tue, Oct 28 2008 02:03:56
Try a HCMX with a bellcolor istead of a comssa. Click.
-
Date: Tue, Oct 28 2008 04:56:54QUOTE (2DK Iceguize @ Oct 27 2008, 09:19 PM) <{POST_SNAPBACK}>well i live in Australia also you could probably find;
Bictory
LoneFang KT
Any-X(Dong-a Any-balls are called Papermate Profiles in Australia)
Atlant-X
What City do you live in?
Which one would you recommend and what do you use? -
Date: Fri, Oct 31 2008 11:02:44QUOTE (BloorA @ Oct 26 2008, 11:20 PM) <{POST_SNAPBACK}>You can make a G1-TwinNP which is basically taking off the clip and putting grips and tips.
could you show me the link plz???
-
Date: Fri, Oct 31 2008 13:21:29
umm i forgot the thread in upsb/ucpsb so i'm giving you the one from mypsc. To be clicking me.
-
Date: Sat, Nov 1 2008 10:31:21
Thanks
-
Date: Mon, Nov 3 2008 23:15:35
what mods can i do with a jedo
-
Date: Mon, Nov 3 2008 23:24:20
G.J.H.
MPFX -
Date: Tue, Nov 4 2008 01:30:15
Wondering if there are any other mods to be made out of the Namae Pen . . .
I <3 Namae -
Date: Tue, Nov 4 2008 04:54:14
i hav
2 rsvps
1 g2
1 profile -
Date: Tue, Nov 4 2008 05:20:40QUOTE (flipside531 @ Nov 4 2008, 12:54 AM) <{POST_SNAPBACK}>i hav
2 rsvps
1 g2
1 profile
-RSVP CX
-Double-sided RSVP MX
-(get a HGG tip) RSVP NX MMT -
Date: Tue, Nov 4 2008 05:21:51
OR you could use a signo tip since that is easier to find in the USA
-
Date: Tue, Nov 4 2008 05:51:41
what can i make with
rsvps
profiles
bic round sticks
g2s
pilot prceises
and a signo tip? -
Date: Tue, Nov 4 2008 05:58:42QUOTE (l33tPi @ Nov 4 2008, 01:51 AM) <{POST_SNAPBACK}>what can i make with
rsvps
profiles
bic round sticks
g2s
pilot prceises
and a signo tip?
DB7 Comssa or Comprecise with the pilot precises and signo tips
-Bictory with bics
-RSVP + G2 = RSVP NX MMT/ Aries's retrac mod (forgot the name)
-RSVP + RSVP = RSVP CX/ double-sided RSVP MX
-Grip your mods with the profiles
-
Date: Tue, Nov 4 2008 06:01:25QUOTE (Yako @ Nov 3 2008, 09:58 PM) <{POST_SNAPBACK}>DB7 Comssa or Comprecise with the pilot precises and signo tips
-Bictory with bics
-RSVP + G2 = RSVP NX MMT/ Aries's retrac mod (forgot the name)
-RSVP + RSVP = RSVP CX/ double-sided RSVP MX
-Grip your mods with the profiles
thanks -
Date: Tue, Nov 4 2008 06:14:42
I was Ignored
-
Date: Tue, Nov 4 2008 06:18:47QUOTE (NinjaKai @ Nov 3 2008, 05:30 PM) <{POST_SNAPBACK}>Wondering if there are any other mods to be made out of the Namae Pen . . .
I <3 Namae
There's the Dr. Namae and Namae mod.
The Dr. Namae is a Dr. KT, but the body and caps is replaced by the Namae pen's.
The Namae mod is the same thing as the Dr. Namae mod, but with Signo tips.
Dr. Namae on Penwish:
http://penwish.com/product_info.php?cPath=...products_id=686
Namae Mod on Penwish:
http://penwish.com/product_info.php?cPath=...products_id=721 -
Date: Tue, Nov 4 2008 08:31:24
I knew of those two, I was wondering if there is another.
-
Date: Tue, Nov 4 2008 17:56:26QUOTE (NinjaKai @ Nov 4 2008, 03:31 AM) <{POST_SNAPBACK}>I knew of those two, I was wondering if there is another.
Namae Comssa
Replace Comssa body with namae body, double cap with comssa caps. Done.
its also sold on Penwish i believe. -
Date: Tue, Nov 4 2008 17:58:38
Nate's Neo-Namae
-
Date: Tue, Nov 4 2008 19:34:49
Pilot g2 pens/g2 mechanical pencils
RSVPs
12x dong-a computer sign pen
1x ballsign mod
2x ballsign pens
6x profile grips
1x comssa mod
bic pens
signo gel pens
signo tips that are identical to hgg tips -
Date: Wed, Nov 5 2008 03:52:16QUOTE (sangara @ Nov 4 2008, 09:58 AM) <{POST_SNAPBACK}>Nate's Neo-Namae
Ooo Whats that ? *Shiny Eyes*
*Runs to the Search bar . . . But finds nothing* -
Date: Sat, Nov 8 2008 18:57:32
3 Metal G-3s
4 Jimnie's
2 UniSigno broad (white)
(Assume I have all of the other items)
I particuarily what to know what the Broads are used for. -
Date: Sun, Nov 9 2008 00:54:10
So far, I know they have been used as a sub for the Signo Knock required for the ayatori mod.
-
Date: Sun, Nov 9 2008 00:59:49QUOTE (NinjaKai @ Nov 8 2008, 02:57 PM) <{POST_SNAPBACK}>3 Metal G-3s
4 Jimnie's
2 UniSigno broad (white)
(Assume I have all of the other items)
I particuarily what to know what the Broads are used for.
Signo boards have the exact same tip as a regular Signo DX
Signo broad's grip are the same as a Signo DX's grip except that it does not have the dimple things -
Date: Sun, Nov 9 2008 07:16:03QUOTE (Drift @ Nov 8 2008, 08:59 PM) <{POST_SNAPBACK}>Signo boards have the exact same tip as a regular Signo DX
Signo broad's grip are the same as a Signo DX's grip except that it does not have the dimple things
the gripon the signo broad is TOTALLY different from that on a signo dx... just for clarification...
but thats for another thread
-
Date: Sun, Nov 9 2008 17:44:56
ive got 4 rsvps. now what?
-
Date: Sun, Nov 9 2008 17:47:10
RSVP V1
RSVP CX -
Date: Wed, Nov 12 2008 16:39:53
what can i do with
G3
Hyper Jell
Anyballs
Lakubos
HGGs
Hi Tecs
Please exclude
Saizen mod
SEVEN mod
f1r3fly mod
kUzU mod
Bonkura KT
Coulomb
Key3 mod
Because I already have them -
Date: Thu, Nov 13 2008 00:02:10QUOTE (Jiinn @ Nov 12 2008, 11:39 AM) <{POST_SNAPBACK}>what can i do with
G3
Hyper Jell
Anyballs
Lakubos
HGGs
Hi Tecs
Please exclude
Saizen mod
SEVEN mod
f1r3fly mod
kUzU mod
Bonkura KT
Coulomb
Key3 mod
Because I already have them
How about a G3 MX?
-
Date: Thu, Nov 13 2008 00:10:47QUOTE (Jiinn @ Nov 12 2008, 11:39 AM) <{POST_SNAPBACK}>what can i do with
G3
Hyper Jell
Anyballs
Lakubos
HGGs
Hi Tecs
Please exclude
Saizen mod
SEVEN mod
f1r3fly mod
kUzU mod
Bonkura KT
Coulomb
Key3 mod
Because I already have them
ayatori mod -
Date: Thu, Nov 13 2008 05:36:39
What can i do with a Pilot Nextage?
-
Date: Thu, Nov 13 2008 05:39:29QUOTE (zachawey @ Nov 12 2008, 09:36 PM) <{POST_SNAPBACK}>What can i do with a Pilot Nextage?
Syn-NexTex
http://www.upsb.info/forum/index.php?showt...=495&hl=syn
OR
Syn-Doreamonex
http://www.upsb.info/forum/index.php?showtopic=6145&hl= -
Date: Fri, Nov 14 2008 06:16:51
what are all the mods that use pilot precises?
-
Date: Sat, Nov 15 2008 05:06:39
Hey there,
What can i make with
1 Pentel RSVP (Red)
1 Papermate Profile (Blue)
2 Hybrid Gel Grip (Blue)
2 Uniball Signo(Blue)
Box of Bics (used fer bictory + bictory ext.) ((Blue+Red))
I really like my extended cause it's pretty long (approx 21 cms)
My normal bictories keep getting stolen by beginner pen spinners >_>, they all started learning from me even though im a beginner too ;p
Anyway, That's what ive got.
Thanks fer the help guys ! -
Date: Sat, Nov 15 2008 05:13:32
What can I make with:
RSVPs
Signos
G2s
Profiles
Bic Round Stics
1 Bic Velocity
1 Zebra F-402
1 Miffy body (no caps)
HGGs (bodies and grips but no tips) -
Date: Sat, Nov 15 2008 05:22:38QUOTE (PurpleFox @ Nov 14 2008, 09:06 PM) <{POST_SNAPBACK}>Hey there,
What can i make with
1 Pentel RSVP (Red)
1 Papermate Profile (Blue)
2 Hybrid Gel Grip (Blue)
2 Uniball Signo(Blue)
Box of Bics (used fer bictory + bictory ext.) ((Blue+Red))
I really like my extended cause it's pretty long (approx 21 cms)
My normal bictories keep getting stolen by beginner pen spinners >_>, they all started learning from me even though im a beginner too ;p
Anyway, That's what ive got.
Thanks fer the help guys !
You can make a Signo tipped MX...Make a normal MX, but instead, put a Signo tip instead of the HGG tip. It balances out the MX quite well.QUOTE (Zweebna @ Nov 14 2008, 09:13 PM) <{POST_SNAPBACK}>What can I make with:
RSVPs
Signos
G2s
Profiles
Bic Round Stics
1 Bic Velocity
1 Zebra F-402
1 Miffy body (no caps)
HGGs (bodies and grips but no tips)
You can make a G2-CTE Vortex. It's a pretty good mod in my opinion, but a little on the hard side to make.
Here's the link:
http://www.upsb.info/forum/index.php?showtopic=7219
-
Date: Sun, Nov 16 2008 18:20:54
What could you make with Micron pens.
http://www.geminicrafts.net/Micron-Pen-Black_0_0_A7N6.jpg -
Date: Sun, Nov 16 2008 18:39:04QUOTE (Gavin @ Nov 16 2008, 10:33 AM) <{POST_SNAPBACK}>A drawing.
This topic is about what pen mods you can make.QUOTE (Kenny @ Nov 16 2008, 10:20 AM) <{POST_SNAPBACK}>What could you make with Micron pens.
http://www.geminicrafts.net/Micron-Pen-Black_0_0_A7N6.jpg
Hmm...I don't think anyone's ever tried modding it before, but you could try cutting the clip off, double capping it, adding a Profile/Anyball grip on each side, and then shoving a Signo tip on each side.
This might make the mod too long, so experiment, and see.
Good luck! -
Date: Sun, Nov 16 2008 18:52:28QUOTE (FrozenIce @ Nov 16 2008, 01:39 PM) <{POST_SNAPBACK}>This topic is about what pen mods you can make.
He's saying, no mods. I thought it was funny.
G2s
RSVPs
2 Monami 153
2 HGG
3 Cartoon Comssa
2 Pentel color pen S360
Profiles
1 Rushon
1 Namae
Bic Round Sticks
Bic Round Stick Grips
some Comssa caps
1 M&M
1 M&M body only
2 Pilot Spotliter
Bicmatic
what should i make?
already have mmx, 153 retractable mod, mxs, simplified HCMX, comssa (cartoon body), mxsa. -
Date: Sun, Nov 16 2008 23:21:27QUOTE (Clam! @ Nov 16 2008, 01:52 PM) <{POST_SNAPBACK}>He's saying, no mods. I thought it was funny.
G2s
RSVPs
2 Monami 153
2 HGG
3 Cartoon Comssa
2 Pentel color pen S360
Profiles
1 Rushon
1 Namae
Bic Round Sticks
Bic Round Stick Grips
some Comssa caps
1 M&M
1 M&M body only
2 Pilot Spotliter
Bicmatic
what should i make?
already have mmx, 153 retractable mod, mxs, simplified HCMX, comssa (cartoon body), mxsa.
Pentel color pen 360 mod by Kaisen: http://www.upsb.info/wiki/index.php/S360_Color_Pen_Mod
Rushon Comssa
Neo-namae mod (if you can get a neogel cap or maybe you can sub it with an RSVP cap)
extended Bictory
MCX v.1 or v.4 my iMatt
Lemon mod by Sangara
-
Date: Tue, Nov 18 2008 02:31:32
What about Shachihata artlines what mod can i make with???
-
Date: Tue, Nov 18 2008 06:32:50
What mods use the grip from Papermate Gel Pens. They have a dimpled grip that looks like the one from the signos, but I can't really tell. Are they a good sub? I tried to order profiles from eBay and he sent me these gel pens instead. Since they're more expensive than the Profiles, I wasn't sure whether or not to keep em or ship them back and get Profiles.
-
Date: Tue, Nov 18 2008 16:30:32
what can i do with :
(4) G2
(4) G1
(1) G3
(3) HGG
(2) Dong_a Caps
Except : G3 Mx
G3 Mx^2
clear comssa
HGG^2
Thx -
Date: Wed, Nov 19 2008 00:01:58
7 papermate profiles
unlimited rsps
unlimited bics (anybody who says bictory will be slapped)
unlimited gelly rolls
one or two dr. grips but they cost a ton
unlimited pilot g2s
unlimited papermate velocitys
unlimited z-grips -
Date: Wed, Nov 19 2008 00:02:49
you could make a ballsign
-
Date: Wed, Nov 19 2008 05:11:00
any one know any mods with a Pentel Wow! pen? model BK440. They have long grips, but the pens themselves are triangular
-
Date: Wed, Nov 19 2008 05:19:43QUOTE (hillsongunited @ Nov 18 2008, 09:11 PM) <{POST_SNAPBACK}>any one know any mods with a Pentel Wow! pen? model BK440. They have long grips, but the pens themselves are triangular
i tried making mod with that and i dont think it is possible but if you flatten out the grip you might be able to use it for weight if you cut it -
Date: Wed, Nov 19 2008 06:37:08
Is the Impact RT tip a suitable replacement for the HGG tip? if not, what other mods can i make with it? (besides Kam's Impact MX, too pricey) Thanks
-
Date: Wed, Nov 19 2008 06:47:30
Its a fairly heavy tip, so it wouldn't exactly make a good sub for a hgg tip.
But you can make this mod with it. Click. -
Date: Fri, Nov 21 2008 11:41:11
What mod could i do with
Sakura COLOR SIGNPEN TWIN? -
Date: Sat, Nov 22 2008 09:01:44
Is Pilot Vega used for any mod?
-
Date: Sun, Nov 23 2008 07:42:38
Does anyone know what mods i can do besides a bictory which i have already made
Papermate Profiles
G2's
Ultra round Stic Grip pens
Uniball Signos
Zebra sarasa's
help is would be appreciated -
Date: Sun, Nov 23 2008 10:51:06
what can i do with
1xpensolsa silver c.s v.9 (thats what it says. its the pen which is used for making comssas)
2xrsvp
3xflexgrip grips
6xdong a caps
3xmonami 153 0.7
3xbic round stic
3xmiffy and melanie (kutsuwa)
1xuni-ball gel impact rt
2xsailor innovation rt1.0
2xsailor innovation broad
unlimitedxpaper mate flexgrip ultra
1xbic matic 0.5
unlimitedxpencils (lol)
1xsome green transparent mechaniccal pencil (i dont know what its called)
ok then done. -
Date: Wed, Nov 26 2008 00:28:01QUOTE (noobpenspinner @ Nov 22 2008, 11:42 PM) <{POST_SNAPBACK}>Does anyone know what mods i can do besides a bictory which i have already made
Papermate Profiles
G2's
Ultra round Stic Grip pens
Uniball Signos
Zebra sarasa's
help is would be appreciated
if u hav 2 profiles u can make an any-x -
Date: Wed, Nov 26 2008 07:04:21
leftover bic barrels after making bictories?
-
Date: Thu, Nov 27 2008 03:11:38
what can i do with:
bic round stick/ultras
rsvps
super tips
dr. grips
g2s
1x g3
1x hgg
1x g1
sunbursts
profiles
other than noob ones like rsvp mx or bictoy or any-x? -
Date: Thu, Nov 27 2008 16:43:58
[quote name='Ninja GF' date='Nov 23 2008, 05:51 AM' post='197959']
what can i do with
1xpensolsa silver c.s v.9 (thats what it says. its the pen which is used for making comssas)
2xrsvp
3xflexgrip grips
6xdong a caps
3xmonami 153 0.7
3xbic round stic
3xmiffy and melanie (kutsuwa)
1xuni-ball gel impact rt
2xsailor innovation rt1.0
2xsailor innovation broad
unlimitedxpaper mate flexgrip ultra
1xbic matic 0.5
unlimitedxpencils (lol)
1xsome green transparent mechaniccal pencil)
a grip avaire -
Date: Thu, Nov 27 2008 16:45:47QUOTE (l33tPi @ Nov 26 2008, 10:11 PM) <{POST_SNAPBACK}>what can i do with:
bic round stick/ultras
rsvps
super tips
dr. grips
g2s
1x g3
1x hgg
1x g1
sunbursts
profiles
other than noob ones like rsvp mx or bictoy or any-x?
You can try a G3 MX if it's a metal tipped G3. If it's plastic you could try some of the JEB spinner's personal mods. -
Date: Sun, Nov 30 2008 22:56:08
I just bought a bunch of
G2
RSVP
Profile
I've already made a RSVP MX and a RG2T, what else can I make with these? -
Date: Sun, Nov 30 2008 22:59:37
Any- X and Cyon RSVP
-
Date: Sun, Nov 30 2008 23:48:10QUOTE (damn chimera @ Nov 30 2008, 02:56 PM) <{POST_SNAPBACK}>I just bought a bunch of
G2
RSVP
Profile
I've already made a RSVP MX and a RG2T, what else can I make with these?
since u already hav a RSVP MX, u can make a Momentum MX -
Date: Mon, Dec 1 2008 00:09:06QUOTE (flipside531 @ Nov 30 2008, 06:48 PM) <{POST_SNAPBACK}>since u already hav a RSVP MX, u can make a Momentum MX
Or he could make a RSVP NX MMT. -
Date: Mon, Dec 1 2008 01:20:27QUOTE (Soulreaper @ Nov 30 2008, 07:09 PM) <{POST_SNAPBACK}>Or he could make a RSVP NX MMT.
Don't you need a HGG tip or Signo tip for that? Unless he had a HGG sub..it wouldn't be complete..
-
Date: Mon, Dec 1 2008 02:54:11
I think I'm going to make the Anyball Retractable with my MX, I hadn't picked up on until now that Profiles are Anyballs.
I'll make a NX MMT once I can find a common HGG sub. -
Date: Mon, Dec 1 2008 21:06:22QUOTE (Sk8boy175 @ Nov 30 2008, 05:20 PM) <{POST_SNAPBACK}>Don't you need a HGG tip or Signo tip for that? Unless he had a HGG sub..it wouldn't be complete..
well he sed he already had an MX so im assuming he has da hgg tips
-
Date: Fri, Dec 5 2008 13:03:16
What mods can i do with
a Retractable RSVP -
Date: Fri, Dec 5 2008 21:00:51
http://www.upsb.info/forum/index.php?showtopic=6631
Cyon RSVP -
Date: Sat, Dec 6 2008 10:37:58
What mod can I do with staedler gel roller classic.
-
Date: Sat, Dec 6 2008 22:32:20
It is only used for the white rsvp looking backplug. So basically anything that uses the rsvp back plug.
-
Date: Tue, Dec 9 2008 00:40:54
Hey everyone;
This is what I just inherited yesterday.
Bic Roundstic Grip with no cap •1
Paper mate Eagle •1
Xeno •3
Pilot G2 •5
Z-Grip •7
Zebra •1
Pilot G2 Mini •1
Uni-Ball Vision •2
R.S.V.P •3 (1without a cap)
Pilot Vball Grip •1
Bic •2 (1 Blue, 1 Clear)
Paper mate write Bros •1
Super tips marker from Crayola •1
Bic Roundstic Double sided modded thingy •1
Spinz Zero •1
Spinz Ronin •1
Some other Spinz pen with skulls on it and 1 loose cap
Spinz Ronin extra body(with no ink)
Spinz extra tube(body?) for the pen w/skulls
I also have a bunch of random little parts and pieces of some friends. Like I said above, I got all of this from a friend that moved who used to pen spin. I am really interested in pen spinning and can do a thumb around,and a charge=P lol. I really want to start my own modded pen collection,as well as practice to enjoy penspinning more=) If somebody could please help I would love to make a cool modded pen to start off my collection,learn,practice with,and that looks cool.
P>S I got a Spinz wristband ha ha WOOT!
Thanks so much to everyone,
Alex
http://i497.photobucket.com/albums/rr338/w...1208081912a.jpg
http://i497.photobucket.com/albums/rr338/w.../1208081912.jpg -
Date: Tue, Dec 9 2008 02:17:29
http://www.upsb.info/wiki/index.php/RSVG2
or a good old RSVP CX -
Date: Wed, Dec 10 2008 05:57:06
i have
g2 pen + mech pencil
sharpie
profiles
impact rt
rsvp fine
supertip
pentel forte
bics
can get but prefer not to get so i can save money
dr grip
uniball gel grip
some other crap that probably wont make a difference...
Any decent looking, nice momentum based double sided mod I can make? -
Date: Wed, Dec 10 2008 06:03:29
You could try making the Dr. ST. If you don't want to use Dr. Grip tips, then use Impact RT ones i guess.
-
Date: Wed, Dec 10 2008 11:33:55
What mods can i make with the pens avaliable in KL?
i'm going on saturday D: -
Date: Wed, Dec 10 2008 12:56:17
You can make a G3 mx, Superpirat mod, ballsign mod, SG2 mod, MP SG2 mod, PSquare MX, PSquare VX, Lakubo mod, Lakubo MMX, F1r3fly G3 mod(yes you can get Dr.Grips) and maybe an ayatori mod(if you actually step foot in subang jaya, you can get hyperjells and signo knocks there at summit, popular bookstore) xP
-
Date: Thu, Dec 11 2008 02:58:52
I already have my own version of Dr. ST and I have the g2 vortex mod by guitrum. What else is there?
-
Date: Thu, Dec 11 2008 03:05:27QUOTE (Aerials @ Dec 9 2008, 09:57 PM) <{POST_SNAPBACK}>i have
g2 pen + mech pencil
sharpie
profiles
impact rt
rsvp fine
supertip
pentel forte
bics
can get but prefer not to get so i can save money
dr grip
uniball gel grip
some other crap that probably wont make a difference...
Any decent looking, nice momentum based double sided mod I can make?
You can make a Signo-tipped Bictory(Trust me, it spins A LOT better than a normal Bictory)
All you need are:
(2) Uniball Gel Grip(Has the same tip as a Signo)
(2) Bic Round Stic's
(2) Profiles
1) Make a Bictory
2) Cut as much Profile grip as you want and shove it onto each cap.
3) Shove the Signo tips on(the grips should hold it in place). -
Date: Thu, Dec 11 2008 03:06:06
Okay I posted this a while back but I didn't get enough replies. So . . .
I would like ALL of the mods that make use of the NAMAE pen
Try to avoid the obvious Namae KT, Namae Mod, Neo-Namae. -
Date: Thu, Dec 11 2008 05:21:51
What can I do with two Zebra M-301X mechanical pencils?
-
Date: Thu, Dec 11 2008 05:29:57
M-301X
-
Date: Thu, Dec 11 2008 05:46:17QUOTE (sangara @ Dec 10 2008, 09:29 PM) <{POST_SNAPBACK}>M-301X
Yes...M-301X, does anyone know?
And a Zebra sarasa. -
Date: Thu, Dec 11 2008 05:55:32
You were right the first time, the pen is called Zebra M-301, the mod is called M-301 X.
Wiki page: http://www.upsb.info/wiki/index.php/M-301_X -
Date: Thu, Dec 11 2008 06:01:41
@NinjaKai
There is the SX mod by LITS,
MP Namae. -
Date: Thu, Dec 11 2008 06:02:09QUOTE (NinjaKai @ Dec 10 2008, 07:06 PM) <{POST_SNAPBACK}>Okay I posted this a while back but I didn't get enough replies. So . . .
I would like ALL of the mods that make use of the NAMAE pen
Try to avoid the obvious Namae KT, Namae Mod, Neo-Namae.
Flexible MX (Namae body) & MP Namae Mod! ^^ -
Date: Fri, Dec 12 2008 00:42:06QUOTE (dori @ Dec 10 2008, 10:02 PM) <{POST_SNAPBACK}>Flexible MX (Namae body) & MP Namae Mod! ^^
Any more? -
Date: Fri, Dec 12 2008 06:55:25
what mod can i make with
profiles
rsvps
hggs
commsa caps
colour twins
g3
g2
=D -
Date: Fri, Dec 12 2008 06:58:32
Any-X
MX -
Date: Sun, Dec 14 2008 00:44:46
What can i make with
G2
RSVP
Signos
Profiles
Bic -
Date: Sun, Dec 14 2008 02:41:20
what can i make with
Tapliclip -
Date: Sun, Dec 14 2008 17:37:32
"What mods can I do with..."
7 RSVPs
4 Dong-A Anyball/Papermate Profiles
Crapload of RoseArt bic round stic-like pens
Crapload of Papermate Write Bros. ballpoint pens
1 Pilot Better Rectractable -
Date: Sun, Dec 14 2008 19:42:18QUOTE (Evocrazy @ Dec 14 2008, 09:37 AM) <{POST_SNAPBACK}>"What mods can I do with..."
7 RSVPs
4 Dong-A Anyball/Papermate Profiles
Crapload of RoseArt bic round stic-like pens
Crapload of Papermate Write Bros. ballpoint pens
1 Pilot Better Rectractable
You could try making an MX with the better tip, and a profile grip. 2 profiles- make an Any-X. 2 RSVP's-RSVP CX. Yeah, good luck!
-
Date: Sun, Dec 14 2008 21:38:27QUOTE (hillsongunited @ Dec 14 2008, 11:42 AM) <{POST_SNAPBACK}>You could try making an MX with the better tip, and a profile grip. 2 profiles- make an Any-X. 2 RSVP's-RSVP CX. Yeah, good luck!
thanks! i'll be sure to get on those when i get off school this week. -
Date: Wed, Dec 17 2008 03:32:42
Grr. . . I want ALL of the Namae Mods!
-
Date: Thu, Dec 18 2008 16:28:16
What mods can I make with the Sakura Jelly Roll I found?
-
Date: Fri, Dec 19 2008 03:26:16
WHAT CAN I DO WITH TAPLICLIP
-
Date: Fri, Dec 19 2008 03:31:06
Key3
-
Date: Fri, Dec 19 2008 03:32:46QUOTE (David G.lanz @ Dec 18 2008, 08:28 AM) <{POST_SNAPBACK}>What mods can I make with the Sakura Jelly Roll I found?
A Gellyroll is the same as a Ballsign.
You can make the Ballsign mod: http://www.upsb.info/wiki/index.php/Ballsign_mod -
Date: Fri, Dec 19 2008 03:34:16
The Ballsign is a nice mod. You should try it out.
-
Date: Fri, Dec 19 2008 03:51:41
Any mods with Sunburst Metallic Med Gel Pens?
-
Date: Fri, Dec 19 2008 03:53:57QUOTE (Limon @ Dec 18 2008, 07:51 PM) <{POST_SNAPBACK}>Any mods with Sunburst Metallic Med Gel Pens?
They're the same as an RSVP so almost any mod that the RSVP uses? -
Date: Fri, Dec 19 2008 03:57:26QUOTE (sangara @ Dec 18 2008, 07:53 PM) <{POST_SNAPBACK}>They're the same as an RSVP so almost any mod that the RSVP uses?
cool thx but any pen mods that is only for sunbursts? -
Date: Fri, Dec 19 2008 04:01:01
K4S has one I think it's the SARMP or something, don't really remember.
-
Date: Sat, Dec 20 2008 04:27:49
to make it really complex, this is what i have and willing to mod
5x hgg bodies (not really want to use the tips nor grips)
sunburst body (possibly the grip)
what can i do with that??? anything with optional grips is good
i also have spare g2's lying around, so that can be included
so anything that uses only hgg, sunburst and g2 without grips would be useful
trying to get rid of the bodies usefully XD
and not any mx variations as well, i've made some already -
Date: Sun, Dec 21 2008 12:23:30QUOTE (k-ryder @ Dec 19 2008, 11:27 PM) <{POST_SNAPBACK}>to make it really complex, this is what i have and willing to mod
5x hgg bodies (not really want to use the tips nor grips)
sunburst body (possibly the grip)
what can i do with that??? anything with optional grips is good
i also have spare g2's lying around, so that can be included
so anything that uses only hgg, sunburst and g2 without grips would be useful
trying to get rid of the bodies usefully XD
and not any mx variations as well, i've made some already
with the hgg bodys you could make a clear comssa, just need comssa caps and g2 parts
and with the sunburst body you could make (if you rly just wanna use body not cap nor grip) a clear kt body you just need another backplug.
sry but with bodys especially these theres not so much to make. -
Date: Sun, Dec 21 2008 13:15:11
Does anybody know any use for Pentel Superb G?
-
Date: Sun, Dec 21 2008 16:01:46
i know the obvious ayatori mods and mxs and what not i can make with all this. but what else would be cool to do with all of this? im gettin bored modding and need some ideas.
1 x Pentel Hybrid Gel Grip HGG BLUE
1 x Pentel Hybrid Gel Grip HGG GREEN
1 x Lakubo Ballpoint Pen- Black
1 x Pentel Hybrid Gel Grip HGG VIOLET
1 x Pentel Hybrid Gel Grip HGG RED
1 x Pentel Hybrid Gel Grip HGG Sky Blue
1 x Uni Laknock Black
1 x Pentel Hybrid Gel Grip HGG PINK
4 x Pilot Hi Tec C
1 x Hybrid Gel Grip Metallic- Silver
1 x Uni Signo Retractable for Ayatori
1 x Uni Laknock Blue 0.5mm
1 x Lakubo Ballpoint Pen- Blue
2 x Sailor Gel Grip- White
2 x Pilot G3 Black
2 x Pilot G3 Black
2 x Sailor Gel Grip- Black
2 x Sailor Gel Grip- Gray
1 x Pilot Dr Grip Shaker Pencil
1 x Zebra Hyper Jell Black
1 x Zebra Hyper Jell Green
1 x Sunburst -Black
1 x Sunburst - Pink
1 x Sunburst - Sky Blue
1 x Uni Signo Broad Blue
1 x Uni Signo Broad Black
1 x Zebra Hyper Jell Blue
1 x Color Twins- Red
1 x Color Twins- Blue
2 x Dong A Yellow Caps
2 x Dong A black cap
1 x Sunburst - Yellow
2 x Dr KT TIPS- Gold Edition
1 x Sunburst - Silver
1 x Anyball Grips 10 color pack
1 x Dr Grip Tip
1 x Dr Grip Grip
2 x Hgg grip Black
1 x Pilot G-2 Purple
1 x Zebra Hyper Jell Pink
1 x Zebra Jimnie gel Black
1 x Zebra Jimnie gel Silver
1 x Pilot G-3 Red plastic tip
1 x Pilot G-3 Green metal tip
1 x Pilot Airblanc
every sailor color grip
2 x Zebra Airfit Grip
10 x signo tip and grip
and alot of other bodys and misc. grips
-
Date: Mon, Dec 22 2008 02:17:31
You can make a KuZu mod...or saizen (if I'm not mistaken)
but yeah...i'd make a KuZu..there pretty sweet
EDIT: Or if you got a Faber Castell tip you can make a Firefly G3 Mod -
Date: Mon, Dec 22 2008 02:31:16QUOTE (arthurrhodes @ Dec 21 2008, 10:01 AM) <{POST_SNAPBACK}>i know the obvious ayatori mods and mxs and what not i can make with all this. but what else would be cool to do with all of this? im gettin bored modding and need some ideas.
1 x Pentel Hybrid Gel Grip HGG BLUE
1 x Pentel Hybrid Gel Grip HGG GREEN
1 x Lakubo Ballpoint Pen- Black
1 x Pentel Hybrid Gel Grip HGG VIOLET
1 x Pentel Hybrid Gel Grip HGG RED
1 x Pentel Hybrid Gel Grip HGG Sky Blue
1 x Uni Laknock Black
1 x Pentel Hybrid Gel Grip HGG PINK
4 x Pilot Hi Tec C
1 x Hybrid Gel Grip Metallic- Silver
1 x Uni Signo Retractable for Ayatori
1 x Uni Laknock Blue 0.5mm
1 x Lakubo Ballpoint Pen- Blue
2 x Sailor Gel Grip- White
2 x Pilot G3 Black
2 x Pilot G3 Black
2 x Sailor Gel Grip- Black
2 x Sailor Gel Grip- Gray
1 x Pilot Dr Grip Shaker Pencil
1 x Zebra Hyper Jell Black
1 x Zebra Hyper Jell Green
1 x Sunburst -Black
1 x Sunburst - Pink
1 x Sunburst - Sky Blue
1 x Uni Signo Broad Blue
1 x Uni Signo Broad Black
1 x Zebra Hyper Jell Blue
1 x Color Twins- Red
1 x Color Twins- Blue
2 x Dong A Yellow Caps
2 x Dong A black cap
1 x Sunburst - Yellow
2 x Dr KT TIPS- Gold Edition
1 x Sunburst - Silver
1 x Anyball Grips 10 color pack
1 x Dr Grip Tip
1 x Dr Grip Grip
2 x Hgg grip Black
1 x Pilot G-2 Purple
1 x Zebra Hyper Jell Pink
1 x Zebra Jimnie gel Black
1 x Zebra Jimnie gel Silver
1 x Pilot G-3 Red plastic tip
1 x Pilot G-3 Green metal tip
1 x Pilot Airblanc
every sailor color grip
2 x Zebra Airfit Grip
10 x signo tip and grip
and alot of other bodys and misc. grips
Make Dr. KT's, BusterCYL, a ComSSa metallic with two tips on each end, KuZu mod, Saizen G3 mod, G3MX², G3-Jimine, Hybrid CommSSa MX, make an MX with a hi-tec C tip, Then sell your sunbursts to JEB people and get better pens
hope that helps
-
Date: Mon, Dec 22 2008 03:49:32QUOTE (iMatt @ Dec 21 2008, 09:31 PM) <{POST_SNAPBACK}>Make Dr. KT's, BusterCYL, a ComSSa metallic with two tips on each end, KuZu mod, Saizen G3 mod, G3MX², G3-Jimine, Hybrid CommSSa MX, make an MX with a hi-tec C tip, Then sell your sunbursts to JEB people and get better pens
hope that helps
is it still a saizen mod if i sub the tips out. i dont have hgr tips. i could use some hgg/signo combinations -
Date: Sat, Dec 27 2008 01:40:53
is there anything besides a G.J.H and a MPFX that i can make with a jedo
what can be made with a super pirat besides a Compirat or a Stylish Pirat -
Date: Tue, Dec 30 2008 20:03:54
What mod can I do with:
5 RSVP
8 G2
2 HGG
2 G2 Mini
Besides and MX and MMX -
Date: Tue, Dec 30 2008 20:10:59QUOTE (Mach5 @ Dec 30 2008, 12:03 PM) <{POST_SNAPBACK}>What mod can I do with:
5 RSVP
8 G2
2 HGG
2 G2 Mini
Besides and MX and MMX
You can make an RSVP NX MMT. -
Date: Tue, Dec 30 2008 20:37:01QUOTE (FrozenIce @ Dec 30 2008, 12:10 PM) <{POST_SNAPBACK}>You can make an RSVP NX MMT.
Any Mod that is at least 17 grams heavy? -
Date: Tue, Dec 30 2008 21:33:52
I don't think you're gonna get to 17 grams with just 2 HGG tips...
-
Date: Sat, Jan 3 2009 11:38:03
what mods can i do with pilot dr.grip g-spec?
-
Date: Sat, Jan 3 2009 11:39:41QUOTE (AikaMatsumaru @ Jan 3 2009, 07:38 PM) <{POST_SNAPBACK}>what mods can i do with pilot dr.grip g-spec?
im sure the saizens mod uses it. -
Date: Sat, Jan 3 2009 15:46:09
how do you make R�SG2VP mod i cant find a tut for it
-
Date: Mon, Jan 5 2009 01:33:28QUOTE (2DK Iceguize @ Dec 26 2008, 08:40 PM) <{POST_SNAPBACK}>is there anything besides a G.J.H and a MPFX that i can make with a jedo
what can be made with a super pirat besides a Compirat or a Stylish Pirat
I made an MPFX with a super pirat body, if that helps...xD
You can also use the super pirat for Stuhl's mod or Pirat KS -
Date: Mon, Jan 5 2009 03:30:18
what mods can i do with 4 HGG bodies? (i used the the tips and grips.)
-
Date: Mon, Jan 5 2009 03:50:41
None with just HGG bodies, but if you can spare some bic caps, you can make a clear bictory.
-
Date: Mon, Jan 5 2009 05:13:16QUOTE (G10 @ Jan 4 2009, 07:30 PM) <{POST_SNAPBACK}>what mods can i do with 4 HGG bodies? (i used the the tips and grips.)
ummm if u have g2 piece and comssa caps+anyball/profile grip, you can make a clear comssa
i know how to make it but i don't know where to find a tut tho sorry -
Date: Fri, Jan 9 2009 01:49:26
Limited Edition Gold G2
G2s
RSVPs
HGGs
Anyballs
TUL
Besides RSVP MX, Momentum MX, RSVG2, RSVP CX, RRMMX.
Thanks! -
Date: Fri, Jan 9 2009 01:57:03QUOTE (AikaMatsumaru @ Jan 3 2009, 06:38 AM) <{POST_SNAPBACK}>what mods can i do with pilot dr.grip g-spec?
mp f1r3fly mod
-
Date: Sat, Jan 10 2009 00:21:06QUOTE (AikaMatsumaru @ Jan 3 2009, 06:38 AM) <{POST_SNAPBACK}>what mods can i do with pilot dr.grip g-spec?
Panda mod too
-
Date: Sat, Jan 17 2009 17:06:50QUOTE (homesliceme @ Jan 8 2009, 08:49 PM) <{POST_SNAPBACK}>Limited Edition Gold G2
G2s
RSVPs
HGGs
Anyballs
TUL
Besides RSVP MX, Momentum MX, RSVG2, RSVP CX, RRMMX.
Thanks!
-
Date: Sat, Jan 17 2009 17:32:21
Well, you can make an Any-X with the anyballs and the G2...
-
Date: Sun, Jan 18 2009 19:19:01QUOTE (Resonance @ Jan 17 2009, 12:32 PM) <{POST_SNAPBACK}>Well, you can make an Any-X with the anyballs and the G2...
Whoops, I forgot to add any-x in there
Anything else? -
Date: Thu, Jan 22 2009 01:42:13
what can i make with some g2s some RSVPs some profiles and some BICs
i alredy made liek 5 BICtories and a mmx but what else? -
Date: Fri, Jan 23 2009 23:19:08
can you make
ayatory mod
with laknocks? (knock type) -
Date: Fri, Jan 23 2009 23:22:17QUOTE (Joshy @ Jan 23 2009, 06:19 PM) <{POST_SNAPBACK}>can you make
ayatory mod
with laknocks? (knock type)
No, you need the non retractable lakubos to make the ayatori mod. -
Date: Sat, Jan 24 2009 02:18:23
What can be made using a G3 body, but without using the cap or tip?
-
Date: Sat, Jan 24 2009 02:34:45QUOTE (Zweebna @ Jan 23 2009, 06:18 PM) <{POST_SNAPBACK}>What can be made using a G3 body, but without using the cap or tip?
a reeder mod with the caps and tip subbed with rsvps and a signo... i think... -
Date: Sat, Jan 24 2009 15:37:26QUOTE (Zweebna @ Jan 23 2009, 08:18 PM) <{POST_SNAPBACK}>What can be made using a G3 body, but without using the cap or tip?
GJH, with a signo tip in the back instead -
Date: Tue, Jan 27 2009 02:32:34QUOTE (CPM8 @ Jan 24 2009, 10:37 AM) <{POST_SNAPBACK}>GJH, with a signo tip in the back instead
GJH uses the cap....
-
Date: Tue, Jan 27 2009 19:10:20QUOTE (gerb234 @ Jan 21 2009, 08:42 PM) <{POST_SNAPBACK}>what can i make with some g2s some RSVPs some profiles and some BICs
i alredy made liek 5 BICtories and a mmx but what else?
Any-x custom
RSVP CX
RG2T
RSVG2
-
Date: Thu, Jan 29 2009 01:41:15
Can I make an MP mod with the following?
1 Staedtler MP (the one that comes in those combo packs)
1 Papermate Xtend
RSVPs
Bic Round Stics
Pilot G2s
2 Profiles
1 Zebra Sarasa 0.7
1 Uniball Signo
1 Papermate Flexgrip
1 Pilot Better Retrac
1 Uniball Signo Gel RT 0.7 -
Date: Thu, Jan 29 2009 14:38:36
is there any mod that I can make with:
G2s
HGGs
G3s -
Date: Thu, Jan 29 2009 14:41:11QUOTE (RedSerpenT @ Jan 29 2009, 10:38 PM) <{POST_SNAPBACK}>is there any mod that I can make with:
G2s
HGGs
G3s
http://www.upsb.info/forum/index.php?showt...=8793&hl=G3
G3MX²
Pens Needed:
Pilot G3 (1)
Pentel HGG (3)
Anyball/Profile (1) [optional]
-
Date: Fri, Jan 30 2009 12:27:25
What can I make out of...
Pentel Sunburst x2
G2 Grip x2
HGG barrels x11
HGG tips x 11
HGG grips x 11
Dr.Grip x1
Yeah....what can I make outta them. Except for RSVP MX I already got like 4 of them. Lol. -
Date: Fri, Jan 30 2009 12:53:06
how about with
2 HGGs
any profile
what mod that I can make? -
Date: Fri, Jan 30 2009 13:23:17QUOTE (NoobiePenTrixx @ Jan 30 2009, 08:27 PM) <{POST_SNAPBACK}>What can I make out of...
Pentel Sunburst x2
G2 Grip x2
HGG barrels x11
HGG tips x 11
HGG grips x 11
Dr.Grip x1
Yeah....what can I make outta them. Except for RSVP MX I already got like 4 of them. Lol.
uh....RSVP MX^2, and cut the Dr. Grip grip and put it over the front HGG grip to balance it out more.
-
Date: Fri, Jan 30 2009 15:53:05
PDS Commsa body / 2 black caps
3 g2 grips
some anyball grips
anything? lol -
Date: Sat, Jan 31 2009 12:50:09
What can I make with
RSVP/Sunburst
HGG
Dr.Grip
Yeah...what can I make out of them. Besides RSVP MX, I got like 4 of them. -
Date: Sat, Jan 31 2009 14:53:24QUOTE (random person @ Nov 18 2007, 12:31 AM) <{POST_SNAPBACK}>but kilometricos aren't open double sided
can I have a pic please. I can help you, but i need a pic. If you mean that there is no backplug, just saw it off, but a pic would be helpful. -
Date: Sat, Jan 31 2009 15:03:55
maybe a modified mx, make an mx, but part of dr.grip grip over hgg and then shave the cap clip off and then put the rest of dr.grip until it is balanced?
-
Date: Sat, Jan 31 2009 15:17:37
Hi !
What can I do with a SuperPirat and with pen that we don't need to buy on internet (I mean pen like RSVP, HGG, G2, etc.).
Thanks ! -
Date: Sun, Feb 1 2009 10:05:09
is there any mod that use a mechanical pencil?, any mechanical pencil?
thnx -
Date: Sun, Feb 1 2009 10:11:29QUOTE (RedSerpenT @ Feb 1 2009, 06:05 PM) <{POST_SNAPBACK}>is there any mod that use a mechanical pencil?, any mechanical pencil?
thnx
search bar.
SEARCHBAR.>.>
Just rattling off a list here
MPFX-Jedo/jedo sub
MPMX(Tek style)-MSP mech
MPMX(Adam style)-G2 mp mech/Supergrip mech
MPKT-Dr kt mech
and so on. -
Date: Sun, Feb 1 2009 14:08:39
Heya~I'm new xD
I am currently looking for ZT Pens but cannot find any of them Currently.
So I have some random pens that I have found in my Room & need a pen mod.
Using the picture below, can anyone tell me any pen mod that I can make? T.T
Thank you -
Date: Sun, Feb 1 2009 14:10:47
BTW ZT can be found in singapore -
Date: Sun, Feb 1 2009 14:11:36
The Signo is usefull, other then that I guess nothing
-
Date: Sun, Feb 1 2009 14:13:19
Zig clean colour for twinart mod.
-
Date: Sun, Feb 1 2009 14:14:33
well you can use the zig clean colour, signo tips and sarasa grips to make a double sided mod
-
Date: Sun, Feb 1 2009 14:19:19QUOTE (Sian_ing @ Feb 1 2009, 10:10 PM) <{POST_SNAPBACK}>
I know xD Just Can't Find em yet xD & ThanksQUOTE (Glamouraz @ Feb 1 2009, 10:13 PM) <{POST_SNAPBACK}>Zig clean colour for twinart mod.
I'll look it up Thanks
-
Date: Sun, Feb 1 2009 14:43:26QUOTE (xKaix @ Feb 1 2009, 09:19 AM) <{POST_SNAPBACK}>I know xD Just Can't Find em yet xD & Thanks
I'll look it up Thanks
evergreen stationery @ novena square 2. they cost $6 each though.gif)
theres a fake one which costs like $2, but i dont know where to get them -
Date: Sun, Feb 1 2009 14:45:49QUOTE (Sian_ing @ Feb 1 2009, 10:43 PM) <{POST_SNAPBACK}>evergreen stationery @ novena square 2. they cost $6 each though
theres a fake one which costs like $2, but i dont know where to get them
Anything in the East? :| -
Date: Sun, Feb 1 2009 15:15:48
sarasas grips are used in seven watercolor mod : http://s8.photobucket.com/albums/a12/jim66...nt=sevenold.png
-
Date: Sun, Feb 1 2009 15:36:46
those used in seven water color mod are SARASA 0.5, not SARASA CLIP.
anyway, i HIGHLY HIGHLY HIGHLY HIGHLY HIGHLY doubt he can get the other parts for the mod -
Date: Wed, Feb 4 2009 10:36:24
What mod(s) can i do with Flexgrip Elites?
Please link me to it.
Thanks in advance -
Date: Wed, Feb 11 2009 16:19:46
what mods can i do with these?
-
Date: Thu, Feb 12 2009 04:19:53
what can i make with:
G2
HGG just the body and cap
Any ball -
Date: Thu, Feb 12 2009 04:39:49QUOTE (faysto @ Feb 11 2009, 08:19 AM) <{POST_SNAPBACK}>what mods can i do with these?
IMG
IMG
looks like you have Super grips, g3, HGG, dr grip grip, and anyball grip. You can make a G3 MX... -
Date: Thu, Feb 12 2009 07:05:36QUOTE (Eric @ Feb 11 2009, 11:39 PM) <{POST_SNAPBACK}>looks like you have Super grips, g3, HGG, dr grip grip, and anyball grip. You can make a G3 MX...
haha i didnt even notice the G3...
hmm.. you could maybe make a fake MX?
that "racingBall" pen looks awful close to an rsvp.
then you would just need to use one of ur hggs.
or...
double cap those white markers
HGG vortex
GJH? (maybe with those black mps as jedo subs)
and if i remember correctly... those pilot bp-s have metal tips, which you can use for random weight anywhere... quite useful.
-
Date: Thu, Feb 12 2009 16:38:01
thanks
-
Date: Sat, Feb 14 2009 08:16:19
what mods can i do with metal g3's?
-
Date: Sun, Feb 15 2009 01:12:08
What other pens do you have?
You could vortex the g3... -
Date: Mon, Feb 16 2009 15:56:29
Or you could use it for F1r3fly's G3 Mod. Or for the G3 MX².
-
Date: Mon, Feb 16 2009 16:02:07QUOTE (webspider @ Feb 16 2009, 07:56 AM) <{POST_SNAPBACK}>Or you could use it for F1r3fly's G3 Mod. Or for the G3 MX².
yep, you can make a F1r3Fly's G3 Mod with the metal g3, HGG, american Dr. Grip grip (although it may be different), and grip sections. You can also use the tip of the black pencil next to the super grip to sub the gripmatic tip. I don't know if it's gonna work but you could try to sub the g2 barrel with the super grip barrel. -
Date: Tue, Feb 17 2009 13:12:32
Hi
Im a beginner and i was wondering which mod would suit me the best. I've considered making a HGG^2 but it looks quite hard to make than other mods. Are there any tips or mods which you guys suggest for me to make? I have three HGG and two G2s..
thanks -
Date: Tue, Feb 17 2009 13:14:15QUOTE (Pen Islandâ„¢ @ Feb 17 2009, 09:12 PM) <{POST_SNAPBACK}>Hi
Im a beginner and i was wondering which mod would suit me the best. I've considered making a HGG^2 but it looks quite hard to make than other mods. Are there any tips or mods which you guys suggest for me to make? I have three HGG and two G2s..
thanks
hmm, if you live at korea, maybe try finding a comssa? double cap it and add 2 HGG tips on it....it is quite nice to spin it...
For the 2 G2s, you can try making Guitrum's G2-E2B mod....it is at the approved tutorials... -
Date: Tue, Feb 17 2009 14:20:21QUOTE (Heva @ Feb 17 2009, 01:14 PM) <{POST_SNAPBACK}>hmm, if you live at korea, maybe try finding a comssa? double cap it and add 2 HGG tips on it....it is quite nice to spin it...
For the 2 G2s, you can try making Guitrum's G2-E2B mod....it is at the approved tutorials...
Lol
Btw, i live in England. The pens they have here are limited and they dont have any modded pens. Thanks for the reply anyways.
-
Date: Tue, Feb 17 2009 14:46:01QUOTE (Pen Islandâ„¢ @ Feb 17 2009, 10:20 AM) <{POST_SNAPBACK}>Lol
Btw, i live in England. The pens they have here are limited and they dont have any modded pens. Thanks for the reply anyways.
Get a pentel rsvp (they are on ebay uk so i think u can by them in your town) and make rsvp nmt or how its called...rsvp+part of g2body on top.add some grips and hgg tip(s) to the top and u got a nice pen:)
Or simple do rsvp mx XD -
Date: Wed, Feb 18 2009 00:25:24
what can i make with a tombow playcolor?
-
Date: Wed, Feb 18 2009 00:28:28QUOTE (Asterisk* @ Feb 17 2009, 07:25 PM) <{POST_SNAPBACK}>what can i make with a tombow playcolor?
Dopamine mod..and something else i think, but i forget >< -
Date: Wed, Feb 18 2009 01:21:56QUOTE (shoeman6 @ Feb 15 2009, 10:12 AM) <{POST_SNAPBACK}>What other pens do you have?
You could vortex the g3...
do you know how to make vortex g3? -
Date: Thu, Feb 19 2009 09:10:28QUOTE (JC @ Feb 18 2009, 08:28 AM) <{POST_SNAPBACK}>Dopamine mod..and something else i think, but i forget ><
Is there a link to the Dopamine Mod?
Thanks in advance. -
Date: Thu, Feb 19 2009 09:14:23
Here ya go:
http://annkou2.blog105.fc2.com/blog-entry-308.html
Sorry, I can't translate >_>
basically :
needle point body + the tip in the front
HGG grip + profile section for the gripping
insert
playcolor cap in the rsvp cap
grip section over the exposed section of the playcolor cap -
Date: Mon, Feb 23 2009 02:34:07
is there anything i can do with a "uni jetstream"
like is there is any usefull parts? -
Date: Mon, Feb 23 2009 03:21:51QUOTE (khaotic @ Feb 22 2009, 09:34 PM) <{POST_SNAPBACK}>is there anything i can do with a "uni jetstream"
like is there is any usefull parts?
Unfortunately not, it's supposedly a good pen for writing. -
Date: Mon, Feb 23 2009 05:03:17QUOTE (Stevieboy7 @ Feb 22 2009, 10:21 PM) <{POST_SNAPBACK}>Unfortunately not, it's supposedly a good pen for writing.
lol kool i need an actual pen for writing lol
-
Date: Mon, Feb 23 2009 09:22:21
anything apart from a flexible mx that i can make with one comssa body?
i only have the one, and probably will only have the one, so something good will be nice
and incase i do make the flex mx, are g3 tips and signo tips simmilar?
wow.... i can't spell similar.... how do you spell it?
anyway, to summarise, i want to know:
1. mods i can make with a single comssa body
2. the similarities between a g3 and signo tip
3. the spelling of simmilar -
Date: Tue, Feb 24 2009 08:16:20
1. Assuming you have the cap and a RSVP, you can make a HCMX or a Lemon Mod.
2. Signo and Metal G3 tips are similar in shape and weight.
3. Similar. -
Date: Tue, Feb 24 2009 08:58:12QUOTE (iamk34n3 @ Feb 24 2009, 05:16 PM) <{POST_SNAPBACK}>1. Assuming you have the cap and a RSVP, you can make a HCMX or a Lemon Mod.
2. Signo and Metal G3 tips are similar in shape and weight.
3. Similar.
1. that assumption is incorrect as i used the cap for a msxa, and i only had the one comssa
2. thankyou
3. yesterday, that looked strangely incorrect....
still i want options for a mod that i can make with:
a single comssa body WITHOUT using the cap -
Date: Wed, Feb 25 2009 04:53:48QUOTE (penmaster @ Feb 17 2009, 07:21 PM) <{POST_SNAPBACK}>do you know how to make vortex g3?
I made this awhile back.
I'll see about releasing a tutorial some time later this week or this weekend.
Just check back on the tutorials sections
-
Date: Wed, Feb 25 2009 05:01:51QUOTE (k-ryder @ Feb 24 2009, 12:58 AM) <{POST_SNAPBACK}>1. that assumption is incorrect as i used the cap for a msxa, and i only had the one comssa
2. thankyou
3. yesterday, that looked strangely incorrect....
still i want options for a mod that i can make with:
a single comssa body WITHOUT using the cap
A Lemon Mod does not use the cap. -
Date: Mon, Mar 2 2009 08:15:03
i'm back
i made the lemon mod (its in the soyp thread)
but now, i've noticed that i need the rsvp cap for alot of the mods, so is there any mod that uses just the rsvp body and not the cap??? -
Date: Mon, Mar 2 2009 13:32:42
What mods can i make with Pilot Bps's ?
Pic link- http://www.jetpens.com/images/p_pibps160bzz.jpg -
Date: Tue, Mar 3 2009 00:14:44
Hi guys ^^
I have a few pens, and it has been a lot of time since i'm not modding from last time...these are the pens i have for modding ^^
Lots of Edding 1200
2xStaedtler Pigment Liner
Lots of Pilot Super Grip
A few Pilot G2
Pilot V5
Superpirat
2xMonami153
Lots of Pentel Bk77
2xSailor Innovation
1xDr Grip (Only grip)
1xMiffy and Melanie
1xHGG
1xComssa
1xImpactRT
And a lot of fake grips (lighter than quality grips), generic barrels...and other stuff
Hope you have some ideas!^^ -
Date: Tue, Mar 3 2009 01:37:37QUOTE (k-ryder @ Mar 2 2009, 12:15 AM) <{POST_SNAPBACK}>i'm back
i made the lemon mod (its in the soyp thread)
but now, i've noticed that i need the rsvp cap for alot of the mods, so is there any mod that uses just the rsvp body and not the cap???
K4S' Clear Body KT uses only the body and no caps. -
Date: Tue, Mar 3 2009 03:37:04
What Can I do with 10 RSVP?
-
Date: Tue, Mar 3 2009 11:39:58QUOTE (Dard83 @ Mar 2 2009, 11:37 PM) <{POST_SNAPBACK}>What Can I do with 10 RSVP?
Nothing.
With 10xrsvp and 10xhgg u can make 10xrsvp mx:D
though u can put the cap on the back x10wich gives u 10xrsvp with cap on back^^
-
Date: Wed, Mar 4 2009 00:57:55QUOTE (Dard83 @ Mar 2 2009, 11:37 PM) <{POST_SNAPBACK}>What Can I do with 10 RSVP?
You could make 5 RSVP CXs (check the wiki)
-
Date: Sat, Mar 7 2009 00:07:40
What can I do with a Comssa body, RSVP, and HGG pen?
I was originally doing HCMX but I messed up the cap and it can't hold a HGG tip anymore. -
Date: Sat, Mar 7 2009 04:35:26QUOTE (Vikroal @ Mar 3 2009, 09:14 AM) <{POST_SNAPBACK}>Hi guys ^^
I have a few pens, and it has been a lot of time since i'm not modding from last time...these are the pens i have for modding ^^
Lots of Edding 1200
2xStaedtler Pigment Liner
Lots of Pilot Super Grip
A few Pilot G2
Pilot V5
Superpirat
2xMonami153
Lots of Pentel Bk77
2xSailor Innovation
1xDr Grip (Only grip)
1xMiffy and Melanie
1xHGG
1xComssa
1xImpactRT
And a lot of fake grips (lighter than quality grips), generic barrels...and other stuff
Hope you have some ideas!^^
make this one...
1x superpirat body
2x pentel Bk77
3x supergrip (red, blue, yellow)
2x v5 cap
procedure..
remove the clip of the v5 cap...
put 'em on the superpirat body.....
attached bk77 tip on the cap...
cut the supergrip like your making a original kt color...
spin...spin...spin.... -
Date: Mon, Mar 9 2009 05:31:42
What are super pirate pens used for (What mod are they used for)?
-
Date: Mon, Mar 9 2009 08:15:51
ok, my friend wants a mod, so he asked me to mod it for him (i'm now apparently the cheif modder and ps jedi master at my school XD)
anyway, he wants a double sided mod, and cheap
and parts that are found in australia, so no comssas
unless ofcourse, i find 2 more down at morning glory, but he'll never get them off me, its my comssa! MINE!
here's a list of pens i can find in australia:
g2
hgg
flexigrip ultra (yes! ofcourse! grip aviaires!)
sunburst
profiles
signo
round stics
and possibles are:
ballsign
playcolour 2
thats not a complete list, look at the pens around the world thread, i should be able to find some there
and here's what i've thought of making:
g2 e2b
... and thats all until i just though about ga's -
Date: Mon, Mar 9 2009 08:35:07QUOTE (Commsa @ Mar 9 2009, 01:31 AM) <{POST_SNAPBACK}>What are super pirate pens used for (What mod are they used for)?
-Compirat
-white comssa body sub
-ZAPER mod
-Pirat KS
-
Date: Mon, Mar 9 2009 23:03:46
has anyone ever used crayola heads n tails crayons? i bought the medium and a rsvp cap fits on the "darker" side, and will probably fit on the lighter side with sanding, there is a "lip" part on there, haven't gotten around to sanding yet, if anyone could make a mod with these that'd be sweet
http://www.crayola.co.uk/media/.gallery/main6272.jpg
there are also fine ones, didn't have enough money to buy them (me being fat and all, bought candy)
EDIT: Link -
Date: Tue, Mar 10 2009 00:37:15QUOTE (DjWatermelon @ Mar 9 2009, 06:03 PM) <{POST_SNAPBACK}>has anyone ever used crayola heads n tails crayons? i bought the medium and a rsvp cap fits on the "darker" side, and will probably fit on the lighter side with sanding, there is a "lip" part on there, haven't gotten around to sanding yet, if anyone could make a mod with these that'd be sweet
http://www.crayola.co.uk/media/.gallery/main6272.jpg
there are also fine ones, didn't have enough money to buy them (me being fat and all, bought candy)
EDIT: Link
Don't know why you need to put caps on the ends?
and different sized ends on a doublesided mod isnt so good....
But by the looks of it... you could just try putting some tips at the end and it would be great for spinning.
And dont worry about other ppl making mods... experiment with the pens you have, and make one yourself!! -
Date: Tue, Mar 10 2009 01:22:31QUOTE (Stevieboy7 @ Mar 9 2009, 07:37 PM) <{POST_SNAPBACK}>Don't know why you need to put caps on the ends?
and different sized ends on a doublesided mod isnt so good....
But by the looks of it... you could just try putting some tips at the end and it would be great for spinning.
And dont worry about other ppl making mods... experiment with the pens you have, and make one yourself!!
i fail at modding, but you can fit caps on both ends, just needs a little sanding, but yeah i was thinking about stuffing tips into the caps or something, idk.. american pens kinda suck though
-
Date: Tue, Mar 10 2009 19:29:16QUOTE (DjWatermelon @ Mar 9 2009, 08:22 PM) <{POST_SNAPBACK}>i fail at modding, but you can fit caps on both ends, just needs a little sanding, but yeah i was thinking about stuffing tips into the caps or something, idk.. american pens kinda suck though
Doubt you could fit tips in those small caps.
Try using grips to hold a tips onto the ends. (kinda like Dr.KT) -
Date: Wed, Mar 11 2009 13:33:58
Hi guys,
untill today i spinned with a pencil, which is very diffcult for me...
so i was wondering if there is any pen mode i can make using these 2 pens:
(Purple = Tenfon Ball Point Pen 519. Black = Pilot HGG B10 without a cap)
thanks for the helpers -
Date: Wed, Mar 11 2009 17:54:34
i have some g2s, hggs, superb g, 2 dong-a anyball, and i can purchase some Zebra jimnies. What mods can i do with them?
-
Date: Fri, Mar 13 2009 12:33:59QUOTE (Pen Islandâ„¢ @ Mar 11 2009, 12:54 PM) <{POST_SNAPBACK}>i have some g2s, hggs, superb g, 2 dong-a anyball, and i can purchase some Zebra jimnies. What mods can i do with them?
http://www.upsb.info/forum/index.php?showtopic=3888 but you need a g3
2 anyballs? try an Any-x, you can reserve a few sections of the grips afterwards -
Date: Fri, Mar 13 2009 14:10:03QUOTE (Pen Islandâ„¢ @ Mar 11 2009, 06:54 PM) <{POST_SNAPBACK}>i have some g2s, hggs, superb g, 2 dong-a anyball, and i can purchase some Zebra jimnies. What mods can i do with them?
Hgg^2, Guitrum's G2-e2b or hgg stabilizer -
Date: Mon, Mar 16 2009 01:42:26
Anyone know what I can do with a Jimnie Gel Retractable?
-
Date: Tue, Mar 17 2009 14:22:03
What modi can make with
5 HGG
1 RSVP
1 Japnes pencil
2 Signo 1 without grip
G-TEC-C4
G2 and G2 mini
iwant to make another mod no RSVP MX -
Date: Wed, Mar 18 2009 09:17:10QUOTE (dorThePro @ Mar 18 2009, 12:22 AM) <{POST_SNAPBACK}>What modi can make with
5 HGG
1 RSVP
1 Japnes pencil
2 Signo 1 without grip
G-TEC-C4
G2 and G2 mini
iwant to make another mod no RSVP MX
make a rsvp nx mmt -
Date: Thu, Mar 19 2009 05:07:14
Hi
I just bought a couple of Faber Castell Power Ball 063 and Bic z4 Roller and I was wondering if there's a mod that uses any of these pens.
Thanks -
Date: Mon, Mar 23 2009 23:46:05
What can you do with:
HGR's? can you make a HGG^2 with the Body?
Papermate Dynagrips
Pilot Better Retractables
Profiles (other than an Any-X)
Papermate G-force
Pentel Color Pen
Signo Bodies (the ones with caps and no grip)
Sanford Saga's (I've already made a mod and seen one, lol)
Zebra Sazara
Thanks. Please only post body uses, no tip "usage."
lol, it's a lot -
Date: Thu, Mar 26 2009 01:43:13
Hello everyone... Im kinda lost with what I should make.. and as many know.. there are a lot of mods.. out there..
Soo here are the materials I have for use:
-X1 Yellow Sunburst
-A combination of Hggs
-x2 Air Fits
-X1 Lakubo
-X1 Pilot G3
-X1 Miffy marker
And a couple of other parts.. that is pretty common.. like signo tips..Pilot G2... Comssa Caps..
Anyone have some suggestions with what I can do.. ?
Any ideas would work.. as long as I use these .... -
Date: Thu, Mar 26 2009 14:14:13QUOTE (Aromatized @ Mar 26 2009, 02:43 AM) <{POST_SNAPBACK}>Hello everyone... Im kinda lost with what I should make.. and as many know.. there are a lot of mods.. out there..
Soo here are the materials I have for use:
-X1 Yellow Sunburst
-A combination of Hggs
-x2 Air Fits
-X1 Lakubo
-X1 Pilot G3
-X1 Miffy marker
And a couple of other parts.. that is pretty common.. like signo tips..Pilot G2... Comssa Caps..
Anyone have some suggestions with what I can do.. ?
Any ideas would work.. as long as I use these ....
Sunburst MX
Hgg^2
G2-E2b
Hybrid dc hgg -
Date: Thu, Mar 26 2009 14:21:53QUOTE (Aromatized @ Mar 25 2009, 08:43 PM) <{POST_SNAPBACK}>Hello everyone... Im kinda lost with what I should make.. and as many know.. there are a lot of mods.. out there..
Soo here are the materials I have for use:
-X1 Yellow Sunburst
-A combination of Hggs
-x2 Air Fits
-X1 Lakubo
-X1 Pilot G3
-X1 Miffy marker
And a couple of other parts.. that is pretty common.. like signo tips..Pilot G2... Comssa Caps..
Anyone have some suggestions with what I can do.. ?
Any ideas would work.. as long as I use these ....
I'm not sure if it'll work, but you might be able to make something like a buster -
Date: Thu, Mar 26 2009 19:53:31
hm... Thnx for the ideas~
Something shall be created tonight~!! <3 -
Date: Fri, Mar 27 2009 15:04:12
well jus use 2 g2 take the front part cut the tip add 2 metal tips and the cuted back part of the front part and fit in to a unsharpened pencil finished *clap*clap
-
Date: Wed, Apr 1 2009 03:17:56
What mods can I make using JUST the body of metal G3?
-
Date: Wed, Apr 1 2009 11:19:23QUOTE (PillarsOfValhalla @ Apr 1 2009, 05:17 AM) <{POST_SNAPBACK}>What mods can I make using JUST the body of metal G3?
Not sure, but flash g3 mod and HyperG3? -
Date: Wed, Apr 1 2009 18:00:41
Hey there, im from the UK and cant get any RSVPs
Ive got x2 pilot G2s
HGG
uni ball gel impact
some random pen called a z - grip!
Cheers -
Date: Thu, Apr 2 2009 22:24:34
I have some Zebra F-301s, a crap load of Pilot G2s, and some RSVPs.
And thanks to anyone who helps out. -
Date: Fri, Apr 3 2009 10:12:12QUOTE (blazn_azian @ Apr 3 2009, 12:24 AM) <{POST_SNAPBACK}>I have some Zebra F-301s, a crap load of Pilot G2s, and some RSVPs.
And thanks to anyone who helps out.
You can use the Zebra F-301s for Z-301R mod
For the others:
RSVG2
RG2T
RSVP CX
And if you checked the previous posts in this thread you would have found out alot too
for example: G2-E2B
Cheers
-
Date: Sat, Apr 4 2009 19:22:54
Does any1 know what to make with:
4x Rsvp (new)
4x Pilot G2 (new)
About 20x bic round sticks
5x papermate flexgrip metal tips
Im broke so I cant buy any pens and I already made 2 bictory and 1 with g2 extension
p.s PLZ help im bored -
Date: Sat, Apr 4 2009 21:09:26QUOTE (sosopenspinner @ Apr 4 2009, 12:22 PM) <{POST_SNAPBACK}>Does any1 know what to make with:
4x Rsvp (new)
4x Pilot G2 (new)
About 20x bic round sticks
5x papermate flexgrip metal tips
Im broke so I cant buy any pens and I already made 2 bictory and 1 with g2 extension
p.s PLZ help im bored
You make BICtories, RSVP CX, RG2T.
You can maybe even use the FlexiGrip tip for an NX MMT or an MMX if you want. -
Date: Sat, Apr 4 2009 21:49:47QUOTE (sosopenspinner @ Apr 4 2009, 09:22 PM) <{POST_SNAPBACK}>Does any1 know what to make with:
4x Rsvp (new)
4x Pilot G2 (new)
About 20x bic round sticks
5x papermate flexgrip metal tips
Im broke so I cant buy any pens and I already made 2 bictory and 1 with g2 extension
p.s PLZ help im bored
Only flexgrip tips? Well, if you had two body's maybe you could make a Grip Avaire with Rsvp and G2 grips
All the mods Mike wrote + RSVG2 -
Date: Wed, Apr 8 2009 06:56:13QUOTE (sosopenspinner @ Apr 5 2009, 05:22 AM) <{POST_SNAPBACK}>Does any1 know what to make with:
4x Rsvp (new)
4x Pilot G2 (new)
About 20x bic round sticks
5x papermate flexgrip metal tips
Im broke so I cant buy any pens and I already made 2 bictory and 1 with g2 extension
p.s PLZ help im bored
make a R - stic with g2 grips instead of anyball (use the metal tips you have) -
Date: Thu, Apr 9 2009 23:08:33
Thx for all the help ill try and make all of them but the ones with the hggs I cant really make because I forgot to mention that I have papermate flex grip ultra so the tips doesn’t really help me
but i have papermate g-force so it doesnt really matter
-
Date: Mon, Apr 13 2009 12:15:13
i got
HGG green whole pen
g2 the top barrel
parts of signo grip
2 signo tips
1 g3
1 hypergell -
Date: Fri, Apr 17 2009 21:03:59QUOTE (daryl1000 @ Apr 13 2009, 07:15 AM) <{POST_SNAPBACK}>i got
HGG green whole pen
g2 the top barrel
parts of signo grip
2 signo tips
1 g3
1 hypergell
If you sub a whole bunch of parts i guess you could try the reeder mod...
Other than that, you could get a bic and make a r-stic -
Date: Fri, Apr 17 2009 23:33:51
Are the small CT caps used for anything?
If not, does anyone know if they fit well on anything? (Ex: What bodies they fit well on) -
Date: Fri, Apr 17 2009 23:51:37QUOTE (Asterisk* @ Apr 17 2009, 04:33 PM) <{POST_SNAPBACK}>Are the small CT caps used for anything?
If not, does anyone know if they fit well on anything? (Ex: What bodies they fit well on)
Simple KT Bictory by K4S
NM-KTX by Guitrum
And they fit on only KT/CT bodies, as far as I know.
You can pull the other inkside of CT's out and put it on any mod, then the small ct cap could fit on it. (this also works for the big caps)
That's what Guitrum did for my double capped miffy He said caps stay on the miffy body better that way.
-
Date: Sat, Apr 18 2009 15:41:26
Bic Kilometrico?
What can i doo with that? -
Date: Sat, Apr 18 2009 21:07:51QUOTE (Asterisk* @ Apr 18 2009, 02:33 AM) <{POST_SNAPBACK}>Are the small CT caps used for anything?
If not, does anyone know if they fit well on anything? (Ex: What bodies they fit well on)
You can use them for S777 MX I think... -
Date: Sun, Apr 19 2009 13:14:10
What dual-sided mod can i make with:
-1x G2
-2x HGG
-2x G1
plus the tutorial pls.... -
Date: Mon, Apr 20 2009 01:57:08
What can I make with
3 RSVP's
4 Papermate Profiles (retractable)
1 Papermate Flexgrip Ultra -
Date: Mon, Apr 20 2009 02:34:24
Lol, wasted money on a piece of crap erasable pen that hardly writes. (yes, I bought a pen for a reason other than spinning! gasp!) Anyone know anything I can do with a Papermate Erasermate? (also, RSVP, Bic Round Stic)
-
Date: Mon, Apr 20 2009 12:20:58
@ danduts:
Dunno...if you could get a hold of 2 G2s or 3 Hggs you could make these:
G2-E2B
HGG Stabilizer: http://files.filefront.com/My+HGG+stabiliz...;/fileinfo.html
@ Zaiga:
Any-X, Rsvp CX
@ Pandubear:
Havent heard about a mod using Erasermate.
Rsvp CX and BICtory -
Date: Tue, Apr 21 2009 11:00:49
thx for the suggestion...
-
Date: Tue, Apr 21 2009 13:34:30QUOTE (danduts @ Apr 21 2009, 01:00 PM) <{POST_SNAPBACK}>thx for the suggestion...
Hehe
Just happy to help. -
Date: Tue, Apr 21 2009 20:19:19
Hey all princeeeee here
I live in England (pretty close to London) and I'm wondering what supplies I can get here that will enable me to make a mod or mod some pens.
Thanks all
(please could you add the shop name and what supply(s) from that shop) -
Date: Wed, Apr 22 2009 00:34:36
what pen would u rather spin if your pro a RSVP MX OR A RSVP CX
-
Date: Wed, Apr 22 2009 12:17:16QUOTE (Prince @ Apr 21 2009, 10:19 PM) <{POST_SNAPBACK}>Hey all princeeeee here
I live in England (pretty close to London) and I'm wondering what supplies I can get here that will enable me to make a mod or mod some pens.
Thanks all
(please could you add the shop name and what supply(s) from that shop)
Hey, this question isn't supposed to be here, but I'll answer anyways.
What pens you can get
Where to find the pens
Next time post in these topics QUOTE (sosopenspinner @ Apr 22 2009, 02:34 AM) <{POST_SNAPBACK}>what pen would u rather spin if your pro a RSVP MX OR A RSVP CX
It's rather personal preference. If you think it's good, then it probably is.
I'm no pro, and I've never used any of those pens, so check out this topic instead:
RSVP CX
Btw, this question should be asked in the pen modifications forum, not here. -
Date: Wed, Apr 22 2009 20:51:37
*goes back to grab his stash*
ok... bought these all yesterday(plus some I've already modded, so I'll leave those out)
8 black G2s
2 Zebra F301
3 Sarasa
3 Dong-a U-Knock
5 RSVPs
EDIT: Also 2 teloscopic Zebras
+ several bodys with some grips and caps laying around form past mods when I had no use for these parts -
Date: Thu, Apr 23 2009 01:32:58QUOTE (Chief_Snake @ Apr 23 2009, 04:51 AM) <{POST_SNAPBACK}>*goes back to grab his stash*
ok... bought these all yesterday(plus some I've already modded, so I'll leave those out)
8 black G2s
2 Zebra F301
3 Sarasa
3 Dong-a U-Knock
5 RSVPs
EDIT: Also 2 teloscopic Zebras
+ several bodys with some grips and caps laying around form past mods when I had no use for these parts
g2's - g2 e2b
zebra telescopic - zt mod
rsvp nx mmt - if you get a metal tip
zebra f301 - z301 mod -
Date: Sun, Apr 26 2009 12:27:02
wot mods can i do with monami signpens??? any mod dat uses it?
-
Date: Mon, Apr 27 2009 06:53:18QUOTE (Pen Islandâ„¢ @ Apr 26 2009, 08:27 PM) <{POST_SNAPBACK}>wot mods can i do with monami signpens??? any mod dat uses it?
not that i know of
but you can alway double cap it and stick tips/grips on it -
Date: Mon, Apr 27 2009 18:35:29
~Uniball Signo~
Gelstick -All colours
Gelgrips - Red, Black,Blue
Broad - Silver, Gold
Rollerball -Silver,Gold White, Bronze,Black
~BiC~
Cristal - Blue,Black,Green, Red
Cristal Clic - Blue,Black,Green, Red
Cristal Pocket - Blue,Black,Green, Red
Cristal Grip- Blue,Black,Green, Red
~Uniball Jetstream~
Silky Smooth - Light blue, Pink, Green
~Papermate~
Flexigrip- Blue,Black
All pens i can get I'm wnderingwhat i can make from them?
Thanks-Prince
-
Date: Mon, Apr 27 2009 19:04:18QUOTE (Prince @ Apr 28 2009, 12:05 AM) <{POST_SNAPBACK}>~Uniball Signo~
Gelstick -All colours
Gelgrips - Red, Black,Blue
Broad - Silver, Gold
Rollerball -Silver,Gold White, Bronze,Black
~BiC~
Cristal - Blue,Black,Green, Red
Cristal Clic - Blue,Black,Green, Red
Cristal Pocket - Blue,Black,Green, Red
Cristal Grip- Blue,Black,Green, Red
~Uniball Jetstream~
Silky Smooth - Light blue, Pink, Green
~Papermate~
Flexigrip- Blue,Black
All pens i can get I'm wnderingwhat i can make from them?
Thanks-Prince
You can use Papermate Flexgrip for making Grip Aviare.
Broads are used for grips and tips in many mods. Just search it in Approved Tutorials and Tutorials Pending Approval sections. -
Date: Mon, Apr 27 2009 22:47:14QUOTE (Pen Islandâ„¢ @ Apr 26 2009, 05:27 AM) <{POST_SNAPBACK}>wot mods can i do with monami signpens??? any mod dat uses it?
u can make a Monami 153S retract
http://www.upsb.info/wiki/index.php/Monami_153S_retract -
Date: Tue, Apr 28 2009 00:19:11QUOTE (sosopenspinner @ Apr 27 2009, 06:47 PM) <{POST_SNAPBACK}>u can make a Monami 153S retractThose are Monami 153S, not Monami sign pen.
http://www.upsb.info/wiki/index.php/Monami_153S_retract
-
Date: Wed, Apr 29 2009 11:53:26
What can I make with small CT caps with any other part????
-
Date: Wed, Apr 29 2009 12:15:40QUOTE (dori @ Apr 18 2009, 01:51 AM) <{POST_SNAPBACK}>Simple KT Bictory by K4S
NM-KTX by Guitrum
And they fit on only KT/CT bodies, as far as I know.
You can pull the other inkside of CT's out and put it on any mod, then the small ct cap could fit on it. (this also works for the big caps)
That's what Guitrum did for my double capped miffy He said caps stay on the miffy body better that way.
-
Date: Fri, May 1 2009 08:14:07
Hello.I wanted to ask If I can do any not too light mods and also pretty nice looking ones with these pens:
Pilot G-1
Pilot G-2
Pilot G-3
Pilot Super Gel
Pilot Frixion
Dong-a Anyball
Pentel Hybrid Gel Grip
PS:Currently heading for Hybrid -DC- HGG, but Will be nice if anyone can tell me another not so bad mod to do with these.
Thanks -
Date: Fri, May 1 2009 13:32:08QUOTE (LordKail @ May 1 2009, 10:14 AM) <{POST_SNAPBACK}>Hello.I wanted to ask If I can do any not too light mods and also pretty nice looking ones with these pens:
Pilot G-1
Pilot G-2
Pilot G-3
Pilot Super Gel
Pilot Frixion
Dong-a Anyball
Pentel Hybrid Gel Grip
PS:Currently heading for Hybrid -DC- HGG, but Will be nice if anyone can tell me another not so bad mod to do with these.
Thanks
You could make a G2-E2B. but that may be too light for your taste.
HGG^2 is a great mob (have on myself), same length as a Rsvp MX and just a little bit lighter.
Haven't tried an Any-X before, but maybe you could try.
-
Date: Wed, May 13 2009 04:22:46
What mods can I do with G2's, Profiles, and RSVP's
-
Date: Wed, May 13 2009 04:44:30QUOTE (JBt @ May 12 2009, 09:22 PM) <{POST_SNAPBACK}>What mods can I do with G2's, Profiles, and RSVP's
you can make a profile G2, MMT MX, G2 or profle gripped mXs if you can find tips. -
Date: Wed, May 13 2009 05:16:34
They are g2 mini's.
-
Date: Mon, May 18 2009 01:40:30
Hey everyone,
Just wondering some good mods I can make with;Rsvp, Dr.Grips,Super Tip Markers, G-2, Xeno?
Thanks,
Alex -
Date: Mon, May 18 2009 02:02:33QUOTE (alex w @ May 17 2009, 08:40 PM) <{POST_SNAPBACK}>Hey everyone,
Just wondering some good mods I can make with;Rsvp, Dr.Grips,Super Tip Markers, G-2, Xeno?
Thanks,
Alex
g2 CTE vortex is one I particularly like, but with a ST it takes a bit of sanding
-
Date: Thu, May 21 2009 01:18:15
besides RSVG2, What mods can I do with some G2's and some RSVP's??
-
Date: Sat, May 23 2009 16:59:25
http://www.upsb.info/wiki/index.php/RSVP_NX_MMT
you can do this if u have a hgg tip laying around -
Date: Sat, May 23 2009 17:04:31QUOTE (Pen Islandâ„¢ @ Mar 11 2009, 01:54 PM) <{POST_SNAPBACK}>i have some g2s, hggs, superb g, 2 dong-a anyball, and i can purchase some Zebra jimnies. What mods can i do with them?
you can make a metallic comssa with g2 grips -
Date: Sat, May 23 2009 17:46:49QUOTE (Simplexã€ãƒ¾(^ã¸^)】 @ May 23 2009, 07:04 PM) <{POST_SNAPBACK}>you can make a metallic comssa with g2 grips
Correct me if I'm wrong, but as far as I know you need 2 Dong-A Computer Sign Pens to make a comssa or metallic comssa. -
Date: Sat, May 23 2009 18:02:58
What mod uses a Signo DX grip?
-
Date: Sun, May 24 2009 01:16:31
i dont have any other parts right now, but has anyone made a mod out of a ZIG memory system writers marker?
i would want it a little longer, and quite a bit heavier. -
Date: Mon, May 25 2009 13:01:49
Any mod that uses a Papermate Flexgrip Elite 1.4?
-
Date: Mon, May 25 2009 13:36:03
You can make a Grip Aviaire
-
Date: Mon, May 25 2009 13:55:07
I thought Grip Aviaire used Flexgrip Ultras.
The tip of the Flexgrip Elite doesn't look as heavy as the Ultras either. -
Date: Mon, May 25 2009 19:14:06
U can also make one with flexgrip, quite different but nice
-
Date: Tue, May 26 2009 12:39:18
hey guys help... i have this pilot clear super grips (the mech pen) and ive been spinning it for quite a while now..and for some reason the grips are turning yellowish...
i've read somewhere that it's because of too much exposure to the UV rays of the sun etc...
please can someone help me?
***wth...wrong thread..sorry* -
Date: Tue, May 26 2009 22:37:10
What mod can i make with a lakubo and signo?
-
Date: Wed, May 27 2009 09:03:18QUOTE (buhryan @ May 27 2009, 06:37 AM) <{POST_SNAPBACK}>What mod can i make with a lakubo and signo?
get a laknock (or signo knock type) and jiminie/hyperjel and you can make an ayatori
lakubo mx -type thing? -
Date: Thu, May 28 2009 02:28:25
has anyone used a ZIG memory system marker before?
-
Date: Thu, May 28 2009 02:43:18
RSVP, RSVP Retractable, alot of Bics, Inc R-2, Pilot G2, and Pilot G2 Pro. Btw I already have an RSVP MX.
-
Date: Wed, Jun 3 2009 04:14:43
The Pen
What mods can I do with the HGG K160-A -
Date: Wed, Jun 3 2009 04:17:00
The Grip looks similiar to a HGG DX grip. Try a Engo Blendo DX?
Link: http://www.upsb.info/wiki/index.php/Engo_Blendo_DX -
Date: Wed, Jun 3 2009 04:18:24QUOTE (CzyMF 562 @ Jun 3 2009, 12:14 PM) <{POST_SNAPBACK}>
Testing my eyesight?
I cant see clearly,the picture of the pen is too small. -
Date: Wed, Jun 3 2009 04:30:51QUOTE (dEViLoFmE @ Jun 2 2009, 09:18 PM) <{POST_SNAPBACK}>Testing my eyesight?
I cant see clearly,the picture of the pen is too small.
http://www.bestpensonline.com/product_imag...%20K160-Ahr.jpg
better? -
Date: Wed, Jun 3 2009 05:03:23
Yeap,but im not sure if its used in any mods,never seen it being used before.
-
Date: Wed, Jun 3 2009 11:02:13
Any mod using Pentel Superb G BK101?
Same inktube as Pentel RSVP AFAIK. -
Date: Wed, Jun 3 2009 15:32:42QUOTE (MaStEr IrOc @ May 27 2009, 07:28 PM) <{POST_SNAPBACK}>has anyone used a ZIG memory system marker before?
here is a link to the picture:
http://image.misterart.com/grouppix/528x352/000/g323.jpg -
Date: Wed, Jun 3 2009 15:47:52QUOTE (MaStEr IrOc @ Jun 3 2009, 05:32 PM) <{POST_SNAPBACK}>
Maybe just double-cap it and add grips and tips of ur choice? -
Date: Sun, Jun 7 2009 06:59:21
what mod could i do with this pen http://penwish.com/product_info.php?cPath=...products_id=665
-
Date: Sun, Jun 7 2009 07:01:32QUOTE (smalljason1234 @ Jun 7 2009, 02:59 PM) <{POST_SNAPBACK}>what mod could i do with this pen http://penwish.com/product_info.php?cPath=...products_id=665
hyperjells?
you can make a variety of japanese mods
off the top of my head i can only remember kuzu and ayatori
there are others
you know what,
-
Date: Mon, Jun 8 2009 15:17:17
What mods can I make with zebra telescopic other than ZT?
-
Date: Mon, Jun 8 2009 16:05:06QUOTE (GhostAce @ Jun 8 2009, 11:17 PM) <{POST_SNAPBACK}>What mods can I make with zebra telescopic other than ZT?
Well, u can try what TEK did (ingenius modding guy XD)
Disclaimer: This is TEK's picture from his photobucket... It's well established that not many, especially not me, can match his skills.
Though I have no zts at the moment so I can't try it -
Date: Tue, Jun 9 2009 11:47:59QUOTE (Savian @ Jun 9 2009, 12:05 AM) <{POST_SNAPBACK}>Well, u can try what TEK did (ingenius modding guy XD)
Disclaimer: This is TEK's picture from his photobucket... It's well established that not many, especially not me, can match his skills.
http://i8.photobucket.com/albums/a12/jim666/Mods/tff.png
Though I have no zts at the moment so I can't try it
Can't find the mod tutorial, does it uses the whole telescopic body?
-
Date: Tue, Jun 9 2009 12:54:44QUOTE (GhostAce @ Jun 9 2009, 07:47 PM) <{POST_SNAPBACK}>Can't find the mod tutorial, does it uses the whole telescopic body?
There is no tut... Just look at it for inspiration then use ur creativity to mod ^^ i don't have any telescopics yet (yet, hoping to get some soon)
Once I have I'll try it out and tell u how it goes.... -
Date: Tue, Jun 9 2009 18:12:39
yes. just split the barrels and combine them that way. then use the heavier tips for weight as well as the spring and clickers. be creative
hoped this helped.QUOTE (KinXiom @ Oct 28 2007, 12:35 AM) <{POST_SNAPBACK}>Is there anything i can do with gripless profiles, G2's RSVP's and signo's?
-
Date: Wed, Jun 10 2009 14:50:47
Hello there,
I live in Europe (in Poland, to be exact), and I'm down with the fact that the Pentel BK90 RSVP are not available (or really rare) here. I'd love to make a RSVP MX, but, you know... >:(
The thing is, there are a couple of pens in the area:
Pentel BK77
Pentel Hybrid Roller
Papermate Flexgrip Ultra
Staedleter Graphite 777
Pentel Line Style
Pilot G1 and Pilot G2 (hard to find, but will do)
What can I create out of this vast selection ? Any help ? I'm currently using a 'level 1 Pencil', and it would be nice to switch. -
Date: Wed, Jun 10 2009 23:09:54
what pen mod can i do with this pen
( i tried double caping it and spinning, but the back didnt have enoguh grip so sometimes the 2nd cap would just fly off while spinning)
and
-
Date: Thu, Jun 11 2009 12:48:08QUOTE (IgromPL @ Jun 10 2009, 04:50 PM) <{POST_SNAPBACK}>Hello there,
I live in Europe (in Poland, to be exact), and I'm down with the fact that the Pentel BK90 RSVP are not available (or really rare) here. I'd love to make a RSVP MX, but, you know... >:(
The thing is, there are a couple of pens in the area:
Pentel BK77
Pentel Hybrid Roller
Papermate Flexgrip Ultra
Staedleter Graphite 777
Pentel Line Style
Pilot G1 and Pilot G2 (hard to find, but will do)
What can I create out of this vast selection ? Any help ? I'm currently using a 'level 1 Pencil', and it would be nice to switch.
Grip Aviaire
Sub out the Slickpen grip with grip of your choice. -
Date: Tue, Jun 16 2009 01:19:28
What can i make with a capless g3? (Used it for HS MX)
along with a bunch of HGGs, Dong-A computer sign pens, profiles/anyballs, and g2?
Not to mention pentel forte... -
Date: Tue, Jun 16 2009 01:36:43QUOTE (duckfun @ Jun 16 2009, 09:19 AM) <{POST_SNAPBACK}>What can i make with a capless g3? (Used it for HS MX)
along with a bunch of HGGs, Dong-A computer sign pens, profiles/anyballs, and g2?
Not to mention pentel forte...
With the capless G3, you can make one of those Japanese G3 mods, (kUzu, SEVEN, etc.)
With the HGGs, ComSSas, Anyball/Profile grips, and an RSVP if you have one, you can make a HGG MSXA.
-
Date: Tue, Jun 16 2009 01:55:52QUOTE (Chobi @ Jun 15 2009, 08:36 PM) <{POST_SNAPBACK}>With the capless G3, you can make one of those Japanese G3 mods, (kUzu, SEVEN, etc.)
With the HGGs, ComSSas, Anyball/Profile grips, and an RSVP if you have one, you can make a HGG MSXA.
XP
lol just found out that those japanese mods need hyperjells/jimnies >:3
btw, what is the difference between an HGG MSXA and a normal one? -
Date: Tue, Jun 16 2009 04:37:49
What can I do with
-8 G2s
-10 bic velocitys
-14 RSVPs
-2 zebra telescopics
-4 zebra F-301s
-16 Zebra Sarasas
-4 Uni-ball Signos
-20+ Staple's Xenos
-5 Pilot Dr.Grips
-and some Bic Round Sticks -
Date: Tue, Jun 16 2009 05:58:48QUOTE (PenModification @ Jun 16 2009, 12:37 PM) <{POST_SNAPBACK}>What can I do with
-8 G2s
-10 bic velocitys
-14 RSVPs
-2 zebra telescopics
-4 zebra F-301s
-16 Zebra Sarasas
-4 Uni-ball Signos
-20+ Staple's Xenos
-5 Pilot Dr.Grips
-and some Bic Round Sticks
obvious ones are toro mx with the rsvp, g2 and signo
zt, with the telescopics
try to mod something out of the rsvp/g2/signo/dr. grip/sarasa
a personal mod -
Date: Tue, Jun 16 2009 12:59:29QUOTE (PenModification @ Jun 16 2009, 06:37 AM) <{POST_SNAPBACK}>What can I do with
-8 G2s
-10 bic velocitys
-14 RSVPs
-2 zebra telescopics
-4 zebra F-301s
-16 Zebra Sarasas
-4 Uni-ball Signos
-20+ Staple's Xenos
-5 Pilot Dr.Grips
-and some Bic Round Sticks
rsvp nx mmx, mx, 301x, zt mod -
Date: Tue, Jun 16 2009 15:21:06QUOTE (k-ryder @ Jun 15 2009, 10:58 PM) <{POST_SNAPBACK}>obvious ones are toro mx with the rsvp, g2 and signo
zt, with the telescopics
try to mod something out of the rsvp/g2/signo/dr. grip/sarasa
a personal mod
isnt a toro with super grip grip??? -
Date: Tue, Jun 16 2009 21:45:54QUOTE (RoastBeef @ Jun 16 2009, 09:21 AM) <{POST_SNAPBACK}>isnt a toro with super grip grip???
supergrip grips are pretty much g2 grips, so it doesn't really matter
also, does anyone have any suggestions for my capless and now tipless g3??? i don't have hyperjells so no japanese mods D: -
Date: Tue, Jun 16 2009 22:22:01
actually a g2 is longer than a super grip
-
Date: Tue, Jun 16 2009 23:36:26QUOTE (k-ryder @ Jun 16 2009, 01:58 AM) <{POST_SNAPBACK}>obvious ones are toro mx with the rsvp, g2 and signo
zt, with the telescopics
try to mod something out of the rsvp/g2/signo/dr. grip/sarasa
a personal mod
I've seen the toro mx but is there a tutorial on how to make it?
Looked everywhere, couldn't find a tut. -
Date: Tue, Jun 16 2009 23:43:28QUOTE (PenModification @ Jun 16 2009, 07:36 PM) <{POST_SNAPBACK}>I've seen the toro mx but is there a tutorial on how to make it?
Looked everywhere, couldn't find a tut.
it's just a regular MX but with a hi tec c tip and a supergrip grip. if you don't have one then use a g2 grip. -
Date: Wed, Jun 17 2009 22:04:48
should i make a gjh, a Hybrid -DC- HGG, or another HS MX with my last (full) g3?
-
Date: Wed, Jun 17 2009 23:16:47QUOTE (duckfun @ Jun 17 2009, 06:04 PM) <{POST_SNAPBACK}>should i make a gjh, a Hybrid -DC- HGG, or another HS MX with my last (full) g3?
To me GJHs are bad to spin with. Too short and not alot of momentum. Hyrbid Dc's are nice and very simple. If it was me tho, I would make a HS MX. Probably because Ive never had one, and would like to try it. -
Date: Sat, Jun 20 2009 20:50:55
hi first post. i'm using an extended bictory but want something a little heavier.
i have:
crayola supertip
pentel rsvp
fine tip sharpies
bic round stic
round stic grip -
Date: Sat, Jun 20 2009 20:52:36
make a dr st.
take the sharpie caps put it on each side of the supertip, then add some grips and find a metal tip and add it on =]
or a rsvp v1 -
Date: Sat, Oct 17 2009 02:27:46
[size="3"][/size] what mods can i make with crayola color explosions?
-
Date: Sat, Oct 31 2009 14:46:52
Pilot G2's
Signo DX's
HGG's
RSVP's
Anyball/Profiles
Comssas
Supertips
Airfits
Ballsigns
Thanks. -
Date: Sat, Oct 31 2009 14:59:44QUOTE (Raine @ Oct 31 2009, 10:46 AM) <{POST_SNAPBACK}>Pilot G2's
Signo DX's
HGG's
RSVP's
Anyball/Profiles
Comssas
Supertips
Airfits
Ballsigns
Thanks.
You cant make quite a bit of stuff, some are...
RSVP MX or Mx^2
Buster Cyl
RSVP MMT or NXMMT
Ballsign with subbed grips
Comssas
and many more
-
Date: Thu, Dec 17 2009 02:36:15
So lately all I have been spinning is heavy mods and now my hands are tired
I need some light mods. I was planning on making some signo tipped comssas, but then I saw a guy spin single sided comssa mods and I was like
I forgot all about those.
They look more like pens than those double sided pens that always draw too much attention (like my heavy mods)
Plus they don't use as many tips.
So it would be nice if someone could provide me with a list of GOOD (like you know for sure) single sided mods that have soft bodies (Comssa, supertip, pirat, etc.), can preferably write, and weigh between 12-16 grams.
THANKS! -
Date: Thu, Dec 17 2009 02:38:32QUOTE (Mr. Ninja @ Dec 16 2009, 09:36 PM) <{POST_SNAPBACK}>So lately all I have been spinning is heavy mods and now my hands are tired
I need some light mods. I was planning on making some signo tipped comssas, but then I saw a guy spin single sided comssa mods and I was like
I forgot all about those.
They look more like pens than those double sided pens that always draw too much attention (like my heavy mods)
Plus they don't use as many tips.
So it would be nice if someone could provide me with a list of GOOD (like you know for sure) mods that have soft bodies (Comssa, supertip, pirat, etc.), can preferably write, and weigh between 12-16 grams.
THANKS!
Dude, Bictory is the real true OM (Original Mod). Soft body, customizable weight (via tips, things in caps, etc), many different looks, single/double sided, and can write. = perfect mod. -
Date: Thu, Dec 17 2009 02:39:58
lemon mod is the first one i think of
comssa body, hgg and signo tip on front, rsvp cap on back
forgot the write part.... lemon can't rite -
Date: Thu, Dec 17 2009 02:41:13QUOTE (Mr. Ninja @ Dec 16 2009, 06:36 PM) <{POST_SNAPBACK}>So lately all I have been spinning is heavy mods and now my hands are tired
I need some light mods. I was planning on making some signo tipped comssas, but then I saw a guy spin single sided comssa mods and I was like
I forgot all about those.
They look more like pens than those double sided pens that always draw too much attention (like my heavy mods)
Plus they don't use as many tips.
So it would be nice if someone could provide me with a list of GOOD (like you know for sure) single sided mods that have soft bodies (Comssa, supertip, pirat, etc.), can preferably write, and weigh between 12-16 grams.
THANKS!
I suggest the Hybrid Comssa MX or HCMX for short. -
Date: Tue, Dec 22 2009 06:11:27
any mod i can do with an impact RT?
-
Date: Tue, Dec 22 2009 06:21:09
Impact MX or Sochie's G3 Mod
-
Date: Sun, Dec 27 2009 00:19:15
anyone find something i havent that uses zt tips other than the zstic D:
im surprised no one's asked this -
Date: Sun, Dec 27 2009 00:39:05QUOTE (hahakumquat @ Dec 26 2009, 04:19 PM) <{POST_SNAPBACK}>anyone find something i havent that uses zt tips other than the zstic D:
im surprised no one's asked this
reeder
sx -
Date: Sun, Dec 27 2009 00:43:46QUOTE (hahakumquat @ Dec 26 2009, 07:19 PM) <{POST_SNAPBACK}>anyone find something i havent that uses zt tips other than the zstic D:
im surprised no one's asked this
iMatt's mod that uses those pentel markers and zt tips. forgot what the mod was called >.<
EDIT: I think it used pentel s360 markers? or something like that. -
Date: Sun, Dec 27 2009 05:21:55
you can use zt tips as a sub for any tip that's in caps (g3 hyperjell) it will add some weight to the back so it is nice to combine it with a mod that's a bit front heavy.
-
Date: Sun, Dec 27 2009 05:25:35QUOTE (Kaffatsum @ Dec 26 2009, 04:43 PM) <{POST_SNAPBACK}>iMatt's mod that uses those pentel markers and zt tips. forgot what the mod was called >.<
EDIT: I think it used pentel s360 markers? or something like that.
iColor -
Date: Sun, Dec 27 2009 22:27:36
Hi, everyone I'm new here and.I'm from Bulgaria and i dont know where to find good pens.I cant find these rsvp commsa ..etc
So my question is : can i build a mod with these pens that i found in my city.
http://img686.imageshack.us/img686/7154/0040o.jpg - some caps
http://img37.imageshack.us/img37/5918/0042jk.jpg - grips
http://img12.imageshack.us/img12/7371/0044a.jpg - tips
http://img130.imageshack.us/img130/4508/0045s.jpg - barrels
http://img23.imageshack.us/img23/2214/0046yo.jpg - thats my mod for now.. sure i can disassemble it and take parts
Please help -
Date: Mon, Dec 28 2009 03:02:01
None of those pens are common pen spin pens but you can double cap the colored barrels on the left and throw some grips on them. The 3rd to last cap can be used it seems as a hyperjell sub of some kind
-
Date: Mon, Dec 28 2009 08:42:48QUOTE (Penwish @ Dec 27 2009, 07:02 PM) <{POST_SNAPBACK}>None of those pens are common pen spin pens but you can double cap the colored barrels on the left and throw some grips on them. The 3rd to last cap can be used it seems as a hyperjell sub of some kind
ive seen those around my house actualy
theyre smaller than rsvp caps O_o but it has that colour part thing on top -
Date: Mon, Dec 28 2009 14:59:45
Well thanks guys i just finished my second mod
http://img148.imageshack.us/img148/2373/0047a.jpg
and i bought some pens and i will experiment with them. -
Date: Tue, Dec 29 2009 00:53:22QUOTE (Xerxes @ Dec 28 2009, 09:59 AM) <{POST_SNAPBACK}>Well thanks guys i just finished my second mod
http://img148.imageshack.us/img148/2373/0047a.jpg
and i bought some pens and i will experiment with them.
The grips on the pens look nice
How long is your new mod? It looks really long and skinny. -
Date: Tue, Dec 29 2009 17:21:26
About 19 centimeters and i found hybrid gel pens
but i still can't find RSVP or something close to rsvp -
Date: Tue, Dec 29 2009 19:17:47
what hybrid pens have that grip? not hgg or hgr....is it made by pentel?
-
Date: Wed, Dec 30 2009 13:47:39QUOTE (Xerxes @ Dec 29 2009, 01:21 PM) <{POST_SNAPBACK}>About 19 centimeters and i found hybrid gel pens but i still can't find RSVP or something close to rsvp
Thats nice. I have really small hands, compared to some people, so I cant really spin anything thick that well...
But anyway, Nice job! -
Date: Wed, Dec 30 2009 16:53:44QUOTE (Penwish @ Dec 29 2009, 03:17 PM) <{POST_SNAPBACK}>what hybrid pens have that grip? not hgg or hgr....is it made by pentel?
It's not made by pentel but the grips are the same.
and an someone tell me what can i do with these pens..
http://img192.imageshack.us/img192/8053/0048b.jpg
Because I'm new in pen spinning and i dont know how to build a good balanced mod
-
Date: Wed, Dec 30 2009 23:10:49QUOTE (Xerxes @ Dec 30 2009, 12:53 PM) <{POST_SNAPBACK}>It's not made by pentel but the grips are the same.
and an someone tell me what can i do with these pens..
http://img192.imageshack.us/img192/8053/0048b.jpg
Because I'm new in pen spinning and i dont know how to build a good balanced mod
The 2 pens-red&green, with the white barrel: is the barrel even? If it is, you could probably take 2 metal tips and attach them to the caps of the pens, rip off the clip, and put the blue grips on them... -
Date: Fri, Jan 1 2010 20:44:22
Yeah that looks like poor man's M&M type body trip off clip double cap it and put the grips from pens on the right on it
-
Date: Mon, Jan 4 2010 02:43:07
Pilot Multiball
They look like they can make good subs for backcap on the Joey Mod, but idk? -
Date: Fri, Jan 8 2010 06:54:56
Hey guys,
Im looking to make a mod and im in australia and looking to make a mod from whats available. I had a look at the resources thread and from that list i could find:
Spoiler:
But, yeah I already have a bictory so im looking for other ideas.
Thanks -
Date: Fri, Jan 8 2010 06:56:36
You could make an ayatori mod.
-
Date: Fri, Jan 8 2010 19:08:40
got a picture of what your talking about i don't see it...
QUOTE (Rayrey @ Jan 3 2010, 09:43 PM) <{POST_SNAPBACK}>Pilot Multiball
They look like they can make good subs for backcap on the Joey Mod, but idk?
-
Date: Fri, Jan 8 2010 23:06:44QUOTE (highlyoriginal @ Jan 8 2010, 02:54 AM) <{POST_SNAPBACK}>Hey guys,
Im looking to make a mod and im in australia and looking to make a mod from whats available. I had a look at the resources thread and from that list i could find:
Spoiler:
But, yeah I already have a bictory so im looking for other ideas.
Thanks
You could make alot of stuff o.o
like sub out parts to make a CYL, or like sub an firefly... Or make an makeshift MX...
Use your
Spoiler:
-
Date: Sat, Jan 9 2010 05:10:43
[quote name='o.0dsrp' date='Jan 9 2010, 09:06 AM' post='318872']
You could make alot of stuff o.o
like sub out parts to make a CYL, or like sub an firefly... Or make an makeshift MX...
Use your
Spoiler:
Thanks for the ideas man...i'll have to look em up. As for imagination i don't think i have the experience at moding to do it right -
Date: Sat, Jan 9 2010 17:42:37
There are aton of spinners in australia now with rsvps. if you got that you can make a ton of mx variations =p
-
Date: Thu, Jan 21 2010 22:55:37
I have:
Pilot Super Grip (lots)
Pilot G-1 (two)
Pilot G-2 (one)
Uni-Ball Signo broad (two)
Zebra M-301 (one)
Dong-A-Comssa (lots)
HGG Barrel and grip (no tip)
RSVP MX (willing to dismiss)
Led tubes
Ink tubes
Bunch of random grips.
Unknown caps about the size of the RSVP cap.
What mods can I make? -
Date: Fri, Jan 22 2010 04:22:49QUOTE (bi a op @ Jan 21 2010, 02:55 PM) <{POST_SNAPBACK}>I have:
Pilot Super Grip (lots)
Pilot G-1 (two)
Pilot G-2 (one)
Uni-Ball Signo broad (two)
Zebra M-301 (one)
Dong-A-Comssa (lots)
HGG Barrel and grip (no tip)
RSVP MX (willing to dismiss)
Led tubes
Ink tubes
Bunch of random grips.
Unknown caps about the size of the RSVP cap.
What mods can I make?
If you can get 2 bic stic clics, you can make Thnikk's white comssa
MSXA with Signo tip instead of hgg? COG might be thrown off though
Lemon Mod if you take apart your MX
-
Date: Fri, Jan 22 2010 06:50:25QUOTE (Nachoaddict @ Jan 22 2010, 05:22 AM) <{POST_SNAPBACK}>If you can get 2 bic stic clics, you can make Thnikk's white comssa
MSXA with Signo tip instead of hgg? COG might be thrown off though
Lemon Mod if you take apart your MX
Thanks yo so much, but link? I can't seem to find MSXA. -
Date: Fri, Jan 22 2010 14:08:13
-
Date: Fri, Jan 22 2010 14:10:07
Thanks
-
Date: Sat, Jan 30 2010 01:13:38
So what can I do with
x2 - x6 Bellcolor,
x2 Pilot G3,
x1 Anyball,
x3 Pilot G2,
x4 Uni Signo,
x2 FC Gripmatic,
x2 BIC Round Stic,
x1 Dong-A Cap,
x2 Sailor Gel Grip ,
x2 Hybrid Gel Grip and
x2 Pilot Super Grip?
*x1 RSVP and x1 Computer Sign Pen* (I don't have them but i'm planning to get one) -
Date: Sat, Jan 30 2010 23:15:10QUOTE (ZT*Zero_KT @ Jan 29 2010, 05:13 PM) <{POST_SNAPBACK}>So what can I do with
x2 - x6 Bellcolor,
x2 Pilot G3,
x1 Anyball,
x3 Pilot G2,
x4 Uni Signo,
x2 FC Gripmatic,
x2 BIC Round Stic,
x1 Dong-A Cap,
x2 Sailor Gel Grip ,
x2 Hybrid Gel Grip and
x2 Pilot Super Grip?
*x1 RSVP and x1 Computer Sign Pen* (I don't have them but i'm planning to get one)
You can almost make F1r3fly g3 if you can get japanese dr. grip shaker.
Also you can make
msxa
metallic comssa
cheat comssa
lemon mod
comssa momentum
flex/flexible mx
hybrid dc Hgg
hybrid comssa mx
rsvp nx mmt
rsvp mx
possibly a reeder mod if you can get a zt tip and bic stic/clic front tip
and a single body rsvp vortex -
Date: Wed, Feb 3 2010 05:15:09
What mods can I make that use the Hi tec c?
-
Date: Wed, Feb 3 2010 05:17:38
Dori's hi tec c mp mod. That's all that I can think of but I know there's more...
-
Date: Wed, Feb 3 2010 05:37:01
A KuZu maybe? but you'll need 2 for that.
-
Date: Wed, Feb 3 2010 06:18:31QUOTE (EssenceOfLife @ Feb 2 2010, 09:15 PM) <{POST_SNAPBACK}>What mods can I make that use the Hi tec c?
kuzu
hitec 3
toro mx
uhhhhhhh -
Date: Wed, Feb 3 2010 06:51:25
What can I make with 3ish CT bodies and caps? No kt or product sc please.
-
Date: Thu, Feb 4 2010 03:29:22QUOTE (AwonW @ Feb 2 2010, 10:51 PM) <{POST_SNAPBACK}>What can I make with 3ish CT bodies and caps? No kt or product sc please.
Only thing I can really think of right now is a simple kt bictory if you don't want a regular kt or product sc. -
Date: Thu, Feb 4 2010 22:01:56
what mod can i make with
2x HGG tips
Whit Comssa With Double caps
Airfir Pen
few RSVP
3x Uni-ball Gel-Grip
mod i don't want to make are Waterfall mod (unless there is a tutorial on making it retractable) , Ck mods, RSVP mx mods. -
Date: Thu, Feb 4 2010 22:03:13QUOTE (_Zu_ @ Feb 4 2010, 11:01 PM) <{POST_SNAPBACK}>what mod can i make with
2x HGG tips
Whit Comssa With Double caps
Airfir Pen
few RSVP
3x Uni-ball Gel-Grip
mod i don't want to make are Waterfall mod (unless there is a tutorial on making it retractable) , Ck mods, RSVP mx mods.
Metallic Comssa, I'm sure you already know
There might be more, but I don't know. -
Date: Thu, Feb 4 2010 22:13:11QUOTE (ZT*Zero_KT @ Jan 30 2010, 02:13 AM) <{POST_SNAPBACK}>So what can I do with
x2 - x6 Bellcolor,
x2 Pilot G3,
x1 Anyball,
x3 Pilot G2,
x4 Uni Signo,
x2 FC Gripmatic,
x2 BIC Round Stic,
x1 Dong-A Cap,
x2 Sailor Gel Grip ,
x2 Hybrid Gel Grip and
x2 Pilot Super Grip?
*x1 RSVP and x1 Computer Sign Pen* (I don't have them but i'm planning to get one)
I see: Signo tipped comssa or bellcolor with sailor grips, or RSVP msxa, or flexible MSXA, if you buy a dr.grip you can also make a f1r3fla g3. -
Date: Thu, Feb 4 2010 23:48:11QUOTE (_Zu_ @ Feb 4 2010, 02:01 PM) <{POST_SNAPBACK}>what mod can i make with
2x HGG tips
Whit Comssa With Double caps
Airfir Pen
few RSVP
3x Uni-ball Gel-Grip
mod i don't want to make are Waterfall mod (unless there is a tutorial on making it retractable) , Ck mods, RSVP mx mods.
I must say not much? If you aren't gonna get any other parts, then the best you can do right now is maybe adding grips to the white comssa and airfit tips or adding airfit grip to the white comssa. Or a lemon mod.
If you can, then I suggest:
Thnikk's white comssa
buster cyl
single body vortex
There should be quite a few other mods with rsvp parts that are not mx's. Try the wiki?QUOTE (tillibilli @ Feb 4 2010, 02:13 PM) <{POST_SNAPBACK}>I see: Signo tipped comssa or bellcolor with sailor grips, or RSVP msxa, or flexible MSXA, if you buy a dr.grip you can also make a f1r3fla g3.
Pretty much what I said? -
Date: Fri, Feb 5 2010 02:18:08QUOTE (Nachoaddict @ Feb 4 2010, 05:48 PM) <{POST_SNAPBACK}>I must say not much? If you aren't gonna get any other parts, then the best you can do right now is maybe adding grips to the white comssa and airfit tips or adding airfit grip to the white comssa. Or a lemon mod.
If you can, then I suggest:
Thnikk's white comssa
buster cyl
single body vortex
i can get more parts, but i want to know what mods that these pens are good to use in
-
Date: Fri, Feb 5 2010 16:28:26
1x HGG
5x RSVP
2x Pilot G-3
2x Ballsign
3x Pilot G-1
Lots of grips (Grips doesn't matter, I use whatever grips I find.
Thanks, I don't want RSVP MX -
Date: Sat, Feb 6 2010 00:04:39QUOTE (bi a op @ Feb 5 2010, 08:28 AM) <{POST_SNAPBACK}>1x HGG
5x RSVP
2x Pilot G-3
2x Ballsign
3x Pilot G-1
Lots of grips (Grips doesn't matter, I use whatever grips I find.
Thanks, I don't want RSVP MX
Hybrid Dc-HGG
ballsign mod?
Get another HGG and oyu can make an MX^2 (Musch nicer looking than standard mx imo. Spins better too)
GSHA if you can get a signo tip
-
Date: Mon, Feb 8 2010 05:12:55
If you have 2 Pink sailors what would you use it for? (by your own preference)
-
Date: Mon, Feb 8 2010 19:42:06QUOTE (Wyvern @ Feb 7 2010, 09:12 PM) <{POST_SNAPBACK}>If you have 2 Pink sailors what would you use it for? (by your own preference)
maybe a dr. comssa with the sailors under some dr. grip grips?
f1r3fly g3
guitrum g3
stylish pirat
sankaku's sailor twin mod
Comssa
Any other mods that use sailor grips pretty much. -
Date: Tue, Feb 9 2010 19:02:34QUOTE (Nachoaddict @ Feb 9 2010, 02:42 AM) <{POST_SNAPBACK}>maybe a dr. comssa with the sailors under some dr. grip grips?
QUOTE (Nachoaddict @ Feb 9 2010, 02:42 AM) <{POST_SNAPBACK}>f1r3fly g3done thatQUOTE (Nachoaddict @ Feb 9 2010, 02:42 AM) <{POST_SNAPBACK}>guitrum g3I'm not rly a G3 fanQUOTE (Nachoaddict @ Feb 9 2010, 02:42 AM) <{POST_SNAPBACK}>stylish piratlooks real pro, yet I still lack the pentel linestyle(s) ._.QUOTE (Nachoaddict @ Feb 9 2010, 02:42 AM) <{POST_SNAPBACK}>sankaku's sailor twin modnah, too hard to get
-
Date: Thu, Feb 25 2010 02:21:09
you know how when you make a comssa you still have the extra uncapped sign pen? i was wondering what you guys do with them because honestly I'm not sure where to put it since it doesn't have a cap
-
Date: Thu, Feb 25 2010 02:22:55
MPFX
EP comssa
uhh..
Also, use this thread for questions like this http://www.upsb.info/forum/index.php?showtopic=1437 -
Date: Thu, Feb 25 2010 02:27:16
lol i was actually asking more where you would put them away or would you just immediately make another mod out of it?
-
Date: Thu, Feb 25 2010 02:44:02
Oh. Put an unused cap over it, any will do really, if you're worried about the ink.
-
Date: Thu, Feb 25 2010 02:57:02QUOTE (davidguy @ Feb 24 2010, 10:27 PM) <{POST_SNAPBACK}>lol i was actually asking more where you would put them away or would you just immediately make another mod out of it?
i tape a spare lid onto it
or put tape on it but sometimes it might leak with only tape if its a felt like computer sign pen
-
Date: Thu, Feb 25 2010 03:09:43
i made a lemons mod with some of mine
-
Date: Thu, Feb 25 2010 03:43:42QUOTE (spinneraddiction @ Feb 25 2010, 12:09 AM) <{POST_SNAPBACK}>i made a lemons mod with some of mine
theres tons of mods u can make other thasn lemon
like flex mx
mp flex mx
guit mod
imatt has a mod that only uses the comssa body too
-
Date: Thu, Feb 25 2010 05:38:13
lol but guitrum has tons of mods xD hmm his ck and black mod use comssa bodies
-
Date: Thu, Feb 25 2010 06:28:49
lol instead of making all these mods
u cuz just go on pw n order their comssa caps lmao -
Date: Thu, Feb 25 2010 06:31:31
Personally, I used it for my Black Staff mod. :]
-
Date: Thu, Feb 25 2010 06:38:55QUOTE (Look Into the Sun @ Feb 25 2010, 02:31 AM) <{POST_SNAPBACK}>Personally, I used it for my Black Staff mod. :]
huh tut? -
Date: Thu, Feb 25 2010 08:57:39
QUESTION!!
what can i do with dong-a playon color....any ideas???thnx... -
Date: Fri, Feb 26 2010 15:00:07
pictures would help
-
Date: Tue, Mar 9 2010 21:08:03
What can I do with:
2 HGGs
6 RSVPs
A random Comssa body.
I've made a couple RSVP variations, but is there anything else I can do? -
Date: Tue, Mar 9 2010 21:13:27QUOTE (CalamityDrive @ Mar 9 2010, 03:08 PM) <{POST_SNAPBACK}>What can I do with:
2 HGGs
6 RSVPs
A random Comssa body.
I've made a couple RSVP variations, but is there anything else I can do?
If you have a signo tip, make a lemon mod, but lemon mod isn't that good unless it has Cartoon ComSSa body -
Date: Wed, Mar 10 2010 05:45:52QUOTE (CalamityDrive @ Mar 9 2010, 01:08 PM) <{POST_SNAPBACK}>What can I do with:
2 HGGs
6 RSVPs
A random Comssa body.
I've made a couple RSVP variations, but is there anything else I can do?
Have you tried MX^2? MXSA?
I'm not really sure about anything else besides MX stuff. Nation already said lemon mod too... -
Date: Wed, Mar 10 2010 10:12:50
How about dong-a Playon color ?
-
Date: Wed, Mar 10 2010 21:15:23
wot mods can i do with RSVP retractables?
-
Date: Sun, Mar 14 2010 20:04:59
What mods can I do with:
3 G2's
2 Profile
1 Zebra F-301 tip
2 Uni-ball Signo RT's
I also have some #2 pencils -
Date: Tue, Mar 16 2010 02:52:09
Just in general, I looked at quite a few mods with the g2 and pens that are easily found in the US, and besides the Bictory, i cant seem to find any that do not involve chopping up the pens with a saw, any suggestions?
and im also kinda curious as to what type of saw ppl use to click the tubes?? -
Date: Tue, Mar 16 2010 03:08:45QUOTE (Json The Shoe @ Mar 15 2010, 07:52 PM) <{POST_SNAPBACK}>Just in general, I looked at quite a few mods with the g2 and pens that are easily found in the US, and besides the Bictory, i cant seem to find any that do not involve chopping up the pens with a saw, any suggestions?
and im also kinda curious as to what type of saw ppl use to click the tubes??
You should try getting a hacksaw or wire cutters. These should work on hard plastic barrels (such as g2 barrels that crack or shatter easily) and soft plastic barrels (which are more malleable E.G. bic bodies). If you don't have these, I suggest a pocket knife or x-acto blade but these WILL ONLY WORK WELL ON SOFT PLASTIC BODIES.
A lot of mods involve the cutting or barrels so getting a reliable saw will probably be a good investment.
Are you looking for mods that only involve american parts or do you have access to japanese pens by ordering from sites like penwish.com or jetpens.com?
-
Date: Tue, Mar 16 2010 04:22:26QUOTE (Nachoaddict @ Mar 15 2010, 10:08 PM) <{POST_SNAPBACK}>You should try getting a hacksaw or wire cutters. These should work on hard plastic barrels (such as g2 barrels that crack or shatter easily) and soft plastic barrels (which are more malleable E.G. bic bodies). If you don't have these, I suggest a pocket knife or x-acto blade but these WILL ONLY WORK WELL ON SOFT PLASTIC BODIES.
A lot of mods involve the cutting or barrels so getting a reliable saw will probably be a good investment.
Are you looking for mods that only involve american parts or do you have access to japanese pens by ordering from sites like penwish.com or jetpens.com?
Well as of now, I prefer solely american parts, because i dont have pocket cash/an allowance, but im really hoping to gather a few foreign parts in the future...
though i have a massive load of gel pens if that helps...? -
Date: Tue, Mar 16 2010 04:30:24QUOTE (Json The Shoe @ Mar 15 2010, 09:22 PM) <{POST_SNAPBACK}>Well as of now, I prefer solely american parts, because i dont have pocket cash/an allowance, but im really hoping to gather a few foreign parts in the future...
though i have a massive load of gel pens if that helps...?
If you could give a name and penmaking company and pics it would help. There are a lot of "gel pens" out there. Anyways, you can try the RG2T (I think that's the name). it is found under the approved section of pen modding tutorials. It required 1 g2 and rsvp but you have to cut the rsvp barrel which is the downside.
Besides that how about a ZT mod? requires 3 american pens. Find it under approved once again. Ppl say it's not great to spin with but it looks nice and it extends so it could be good for collecting. -
Date: Tue, Mar 16 2010 23:16:40QUOTE (Nachoaddict @ Mar 15 2010, 11:30 PM) <{POST_SNAPBACK}>If you could give a name and penmaking company and pics it would help. There are a lot of "gel pens" out there. Anyways, you can try the RG2T (I think that's the name). it is found under the approved section of pen modding tutorials. It required 1 g2 and rsvp but you have to cut the rsvp barrel which is the downside.
Besides that how about a ZT mod? requires 3 american pens. Find it under approved once again. Ppl say it's not great to spin with but it looks nice and it extends so it could be good for collecting.
Does teh ZT mod require any saws/cutting of the barrels? -
Date: Wed, Mar 17 2010 00:01:07
Cutting of Bic stic barrel. Very easy, you can do it with an xacto knife if your careful. Just cut more and sand it down.
Check the ZT tutorial -
Date: Wed, Mar 17 2010 01:01:04QUOTE (Kaffatsum @ Mar 16 2010, 07:01 PM) <{POST_SNAPBACK}>Cutting of Bic stic barrel. Very easy, you can do it with an xacto knife if your careful. Just cut more and sand it down.
Check the ZT tutorial
Thank you! Just curious (cuz i just started PS and dont really buy too many pens), are all the bic pens and pilots in supermarkets (ie walmart, target, office depot)? -
Date: Wed, Mar 17 2010 01:06:12QUOTE (Json The Shoe @ Mar 16 2010, 06:01 PM) <{POST_SNAPBACK}>Thank you! Just curious (cuz i just started PS and dont really buy too many pens), are all the bic pens and pilots in supermarkets (ie walmart, target, office depot)?
Not sure about pilots since the company makes a wide variety of pens. If ur talking about g2's, then there are mini ones, regular ones, and the barrels come in tinted and clear and the grips are different.
As for bics, the bodies of bic clics and the capped bics are different and they have different parts. -
Date: Thu, Mar 18 2010 14:49:15
Just wanna' know what do you think is the best mod to make with a dc comssa and an rsvp? both separately. I just traded with the Singaporean PSer's cause I can't trade overseas so I don't wanna waste these 2 mods.
-
Date: Thu, Mar 18 2010 17:51:10
Good evening, everyone!
I wonder what can I do with some "Staedtler 326" markers? I have never modded a pen before, and I'm a total beginner with pen spinning.
Thanks -
Date: Thu, Mar 18 2010 22:55:25QUOTE (Tgz @ Mar 14 2010, 04:04 PM) <{POST_SNAPBACK}>What mods can I do with:
3 G2's
2 Profile
1 Zebra F-301 tip
2 Uni-ball Signo RT's
I also have some #2 pencils
Please help! I would prefer not to cut barrels, if possible. I only have an Xacto knife for cutting. -
Date: Thu, Mar 18 2010 23:02:54QUOTE (Tgz @ Mar 18 2010, 03:55 PM) <{POST_SNAPBACK}>Please help! I would prefer not to cut barrels, if possible. I only have an Xacto knife for cutting.
there's not much you can do with those parts only. do you mean only those parts or can you get other parts in addition. Also it might be wise to do some of your own lurking/research in the wiki and approved and pending tutorial sections of the forum, just to see if any mods you like use any of the parts oyu have. -
Date: Fri, Mar 19 2010 02:38:29QUOTE (Nachoaddict @ Mar 18 2010, 07:02 PM) <{POST_SNAPBACK}>there's not much you can do with those parts only. do you mean only those parts or can you get other parts in addition. Also it might be wise to do some of your own lurking/research in the wiki and approved and pending tutorial sections of the forum, just to see if any mods you like use any of the parts oyu have.
I want to use these parts only. I've seen the Any-X, but can I cut those pens with Xacto knives? -
Date: Fri, Mar 19 2010 02:53:48QUOTE (Tgz @ Mar 18 2010, 07:38 PM) <{POST_SNAPBACK}>I want to use these parts only. I've seen the Any-X, but can I cut those pens with Xacto knives?
You can't make an any-x with only those parts. You also need an hgg tip...
I did see an any-x lookalike that only uses 2 profiles that was in the tutorials pending section.
You can try to cut profile bodies with an xacto knife but they are "hard" plastic so they might crack easily or it might take forever. Invest in a good hacksaw or wire cutters
And you really can't do much with the parts you have right now... -
Date: Fri, Mar 19 2010 03:50:28QUOTE (Nachoaddict @ Mar 18 2010, 10:53 PM) <{POST_SNAPBACK}>You can't make an any-x with only those parts. You also need an hgg tip...
I did see an any-x lookalike that only uses 2 profiles that was in the tutorials pending section.
You can try to cut profile bodies with an xacto knife but they are "hard" plastic so they might crack easily or it might take forever. Invest in a good hacksaw or wire cutters
And you really can't do much with the parts you have right now...
I could've sworn I saw a thread called "Any-X Custom" somewhere. I'll post a link if I manage to find it again. Thanks for your help though!
EDIT: Here's the tutorial. http://www.upsb.info/forum/index.php?showt...=13224&st=0 -
Date: Mon, Mar 22 2010 21:52:54
Hello.I am in a small trouble and want to ask you all of help.The problem is...I can't find anything to make >.<...There are actually plenty many mods I can do but I can't choose which to make and don't know what's recommended to me since I have to stick to budget at these hard days
.So here I am,Requesting anyone of you recommending me what to make with the following pens:
Pilot G1
Pilot G2
Pilot G3
Pentel RSVP RETRACTABLE
Pentel Hybrid Gel Grip
Dong-A Anyball's
Faber Castell Grip Matic
Zebra Jimnie
I would really like your opinions and here are the three mods that I've made in my life:
Any-x Custom,X-Matic [Which I failed] and G3MX².
Help me out and THANK YOU!X3 -
Date: Tue, Mar 23 2010 16:50:43
I was wondering what i could make with a rsvp, a g2, a round stic grip, some funky gel pens, and normal bics?
(yes i know i have a crappy store of pens =_=) -
Date: Thu, Mar 25 2010 22:27:05
I have a black RSVP, blue Pentel Sunburst Metallic, 3 black G2 Pilot Mechanical pencils, red supergrip G2 pencil, Two BIC round stic Grip fines, BIC Atlantis, 0.5mm buffalo made in Taiwan, Pink gelly roll, and Pentel Champ pencil, and random mechanical pencil with a skinny grip but it's longer than normal 0.o. I can get any pen or pencil that's easy to find in the US at Target, Walmart, or anything.
-
Date: Thu, Mar 25 2010 22:49:50QUOTE (Json The Shoe @ Mar 23 2010, 09:50 AM) <{POST_SNAPBACK}>I was wondering what i could make with a rsvp, a g2, a round stic grip, some funky gel pens, and normal bics?
(yes i know i have a crappy store of pens =_=)
if you get a signo tip or hgg tip, you can make an rsvp mmx or rsvp nx mmt. Other than taht, bictory.QUOTE (MystikSpinnur @ Mar 25 2010, 03:27 PM) <{POST_SNAPBACK}>I have a black RSVP, blue Pentel Sunburst Metallic, 3 black G2 Pilot Mechanical pencils, red supergrip G2 pencil, Two BIC round stic Grip fines, BIC Atlantis, 0.5mm buffalo made in Taiwan, Pink gelly roll, and Pentel Champ pencil, and random mechanical pencil with a skinny grip but it's longer than normal 0.o. I can get any pen or pencil that's easy to find in the US at Target, Walmart, or anything.
signo tipped rsvp mx with g2 grip instead of hgg grip in the front
besides that same as i said to json the shoe, get a signo tip or hgg tip and make an rspv mmx or nx mmt or bictory -
Date: Thu, Mar 25 2010 23:09:04QUOTE (Nachoaddict @ Mar 25 2010, 03:49 PM) <{POST_SNAPBACK}>if you get a signo tip or hgg tip, you can make an rsvp mmx or rsvp nx mmt. Other than taht, bictory.
signo tipped rsvp mx with g2 grip instead of hgg grip in the front
besides that same as i said to json the shoe, get a signo tip or hgg tip and make an rspv mmx or nx mmt or bictory
For an HGG tip, I have something that might be able to work. it's called the uni-gel by Sanford. Would this work for an nx mmt or rsvp mmx? -
Date: Thu, Mar 25 2010 23:16:59QUOTE (MystikSpinnur @ Mar 25 2010, 04:09 PM) <{POST_SNAPBACK}>For an HGG tip, I have something that might be able to work. it's called the uni-gel by Sanford. Would this work for an nx mmt or rsvp mmx?
It should fit on the side of the g2 barrel with the twirly things on the inside. the nubs i mean. Ur nx mmt or mmx will be a bit front heavy?
the signo tip is heavier than the hgg tip and is just a sub -
Date: Thu, Mar 25 2010 23:30:44QUOTE (Nachoaddict @ Mar 25 2010, 04:16 PM) <{POST_SNAPBACK}>It should fit on the side of the g2 barrel with the twirly things on the inside. the nubs i mean. Ur nx mmt or mmx will be a bit front heavy?
the signo tip is heavier than the hgg tip and is just a sub
I decided to use the G2 grip and my sanford uni gel tip for an MX. Thanks so much, I've made my first mod xD! Also, its center of gravity is in the middle! -
Date: Thu, Mar 25 2010 23:32:14QUOTE (MystikSpinnur @ Mar 25 2010, 04:30 PM) <{POST_SNAPBACK}>I decided to use the G2 grip and my sanford uni gel tip for an MX. Thanks so much, I've made my first mod xD! Also, its center of gravity is in the middle!
No prob. A regular mx is backheavy so the signo tip should balance it out. -
Date: Sun, Mar 28 2010 07:07:39
My Pens:
- 1 Dr.Grip 4+!
- Sakura Ballsign 2x
- Rsvp MX parts
- Crayola Supertips
- 2 comssa caps
What mod can I do with these pens? Thanks... -
Date: Sun, Mar 28 2010 17:11:28QUOTE (Bam @ Mar 28 2010, 12:07 AM) <{POST_SNAPBACK}>My Pens:
- 1 Dr.Grip 4+!
- Sakura Ballsign 2x
- Rsvp MX parts
- Crayola Supertips
- 2 comssa caps
What mod can I do with these pens? Thanks...
If you get a bic, you can make a stek body and then put commsa caps on it and then put dr. grips and tips on the caps to make a mod like that
Or make a buster cyl body but switch out the airfit grips and tips for dr. grip tips and grips -
Date: Tue, Mar 30 2010 06:11:56
what mods uses a namae body?
-
Date: Tue, Mar 30 2010 06:27:47QUOTE (davidguy @ Mar 29 2010, 11:11 PM) <{POST_SNAPBACK}>what mods uses a namae body?
Charlie's (now lookintothesun) sx, namaezing mod i think? -
Date: Tue, Mar 30 2010 23:10:41
I'm trying to find a way to make the body for a pen that I will put LEDs in. These are the pens/parts I have right now.
RSVP, G2, Zgrip, Profile, Bic, F301, Signo, HGR, various metal tips, various grips
some assortment of RSVP + G2 doesn't really look good since the RSVP barrel is much thicker than the G2 one so I can't make it seamless. I have no idea where to get a G3.
I've been trying various stuff with g2s zgrips but most either come out too long or too short or the CoG is right around a connection between two pens. Right now the best idea I have is front part of g2 with f301 tip -- zgrip barrel -- another zgrip barrel with ~2cm cut off -- rsvp cap. Which kinda seems to works. But maybe someone else has a better idea?
I know I'm fussing over looks but it is for an LED mod, and I don't need another normal mod as I'm fine with my impact mx. And yea I realize I don't have a lot of pens... I can try to get others that are commonly available in regular U.S. stores. -
Date: Tue, Mar 30 2010 23:16:07QUOTE (feuxfollets @ Mar 30 2010, 04:10 PM) <{POST_SNAPBACK}>I'm trying to find a way to make the body for a pen that I will put LEDs in. These are the pens/parts I have right now.
RSVP, G2, Zgrip, Profile, Bic, F301, Signo, HGR, various metal tips, various grips
some assortment of RSVP + G2 doesn't really look good since the RSVP barrel is much thicker than the G2 one so I can't make it seamless. I have no idea where to get a G3.
I've been trying various stuff with g2s zgrips but most either come out too long or too short or the CoG is right around a connection between two pens. Right now the best idea I have is front part of g2 with f301 tip -- zgrip barrel -- another zgrip barrel with ~2cm cut off -- rsvp cap. Which kinda seems to works. But maybe someone else has a better idea?
I know I'm fussing over looks but it is for an LED mod, and I don't need another normal mod as I'm fine with my impact mx. And yea I realize I don't have a lot of pens... I can try to get others that are commonly available in regular U.S. stores.
You can get g3's from penwish here penwish.com -
Date: Wed, Apr 7 2010 13:23:34
Uh, im in Malaysia and i have very limited budget here.
I really can't buy pens by shipping and all, so can anyone tell me what i can do with Pilot, Papermate and Faber Castell pens?
Pls tell me the mod and the pen i need to use. And the directions of making one. Thanks.
P.S. i do spinning tricks like sonics and thumbarounds.
-
Date: Thu, Apr 8 2010 06:50:41
Yeah you are going have to be more specific than pilot papermate. need a model number or pen type before we can make any recommendations
-
Date: Fri, Apr 9 2010 03:26:26
Any model will do, i haven't bought any pens and i will after you all can give me the models and directions.
But if you really must know the model, i prefer g2s and those pens that go *click*
i really don't know any pen that could be modified, but only that i can buy those faber castell, pilot and papermate pens -
Date: Tue, Apr 13 2010 14:52:12
OK, so what can i do with these pens?
Pilot G1
Pilot G2
Pilot G3
Pilot Dr. Grip
Pilot Super Grip
Pilot Shaker
Pentell Sharplet-2
Papermate KV2
Faber Castell click ball 1422
Faber Castell Ball Pen 1423
Faber Castell Grip-Matic
I prefer writable pens, and i like 20cm< pens and heavy balanced ones ^^
and has anyone created a writeable mechanical pencil mod yet?? I've never heard of one... i guess people hate it when the lead breaks when they made their pen fall...
I'm trying out a 20< cm long Pilot super grip ^^ but i would be easier to get directions from other people... -
Date: Tue, Apr 13 2010 21:07:14
http://www.upsb.info/forum/index.php?s=&am...st&p=196978
here's a list of mechanical pencil mods, dunno if any of them can be made with that list though -
Date: Wed, Apr 14 2010 00:05:28
you should look at some of the mods on here under the approved mods and see what parts you need and then substitute different parts in.... Thats what I do, since I don't order pens at all...
-
Date: Wed, Apr 14 2010 22:55:07
Hello spinners, first post here so help me out abit ^^
The crapsack (aka leftovers)
3x HGG (No tips!)
2x Ballsign (barrel+ink Only)
1x Sailor Gel Grip
1x Pentel RSVP (I kinda hate it's heavyness)
4x Pilot G2 Pens (+grip)
1.5x some cheap dr grip Substitute
8x Anyball Grip
2x Comssa caps
2x Keytyo pens (is possible leave the 2x Black Caps for an Bonkura mod)
1x Uniball Signo Tip
1x Uniball Signo Gel RT
So far, iam pretty noob at PS and ehh please exclude the following:
Comssa/Ballsign mod, some Pentel RSVP mod-a-like (MX?), G2 mod and just made a Grip Aviare Mod.
Thanks in advance -
Date: Sat, Apr 17 2010 04:48:19
What mods can I do with an American Dr. Grip, Profiles, RSVP, G2, and Comssa caps?
Mainly look to get rid of the American Dr. Grip. -
Date: Sat, Apr 17 2010 04:54:05QUOTE (Zerotran0 @ Apr 16 2010, 09:48 PM) <{POST_SNAPBACK}>What mods can I do with an American Dr. Grip, Profiles, RSVP, G2, and Comssa caps?
Mainly look to get rid of the American Dr. Grip.
american dr. grip is used in the marker mod fusion. Other than that it is used as a dr. grip grip sub. You can put it on a comssa but not muc u can do with those parts only -
Date: Sat, Apr 17 2010 22:24:11QUOTE (Nachoaddict @ Apr 17 2010, 12:54 AM) <{POST_SNAPBACK}>american dr. grip is used in the marker mod fusion. Other than that it is used as a dr. grip grip sub. You can put it on a comssa but not muc u can do with those parts only
I do have some HGGs, and among other parts. -
Date: Sun, Apr 18 2010 01:52:24
what exactly can be made with sunbursts? i mean im sure u can make an mx out of it, but is there anything special u can do with it? or is the pen just awezsome cuz its shiny? xD
-
Date: Sun, Apr 18 2010 02:15:16QUOTE (Json The Shoe @ Apr 17 2010, 08:52 PM) <{POST_SNAPBACK}>what exactly can be made with sunbursts? i mean im sure u can make an mx out of it, but is there anything special u can do with it? or is the pen just awezsome cuz its shiny? xD
Sunbursts are just an RSVP variant.
differences:
Large, HGG style ink
Shorter Body
Writing on the body
The tip is wider, so that you have to have more grip on it when making an MX (makes up for the shorter body)
Come inAll the Colors HGG's (normal) come in
Same shades as HGG's, not the ugly kind that RSVP's are in
more expensive.
Cap has a stopper instead of ball
Cap is .5 grams heavier
A lot of things can be made with sunbursts.
in fact pretty much anything that can be made with RSVP's can be made with sunbursts. -
Date: Sun, Apr 18 2010 03:35:29QUOTE (Nation @ Apr 17 2010, 09:15 PM) <{POST_SNAPBACK}>Sunbursts are just an RSVP variant.
differences:
Large, HGG style ink
Shorter Body
Writing on the body
The tip is wider, so that you have to have more grip on it when making an MX (makes up for the shorter body)
Come inAll the Colors HGG's (normal) come in
Same shades as HGG's, not the ugly kind that RSVP's are in
more expensive.
Cap has a stopper instead of ball
Cap is .5 grams heavier
A lot of things can be made with sunbursts.
in fact pretty much anything that can be made with RSVP's can be made with sunbursts.
I never knew there were that many differences and maybe try making a evo sunburst mod. -
Date: Sun, Apr 18 2010 05:15:43
What mods can I do with ...
2xzebra f-301 tips
2xcomssa cap
anyball grip -
Date: Sun, Apr 18 2010 14:20:05QUOTE (bushvatoi @ Apr 18 2010, 12:15 AM) <{POST_SNAPBACK}>What mods can I do with ...
2xzebra f-301 tips
2xcomssa cap
anyball grip
if you have a comssa body, you can make a comssa.
or if you have the bodies of the f-301's, you can nude them out, find some way to connent, put the comssa caps on the double f301, and then use anyball grip to hold F301 tips?
although that would most likely be very long, ugly, and bad to spin. -
Date: Wed, Apr 21 2010 14:51:06
i was just scrounging up some old stuff and found some old...fibracolor markers? can they be used in anything??
-
Date: Thu, Apr 22 2010 03:45:51QUOTE (Json The Shoe @ Apr 21 2010, 07:51 AM) <{POST_SNAPBACK}>i was just scrounging up some old stuff and found some old...fibracolor markers? can they be used in anything??
I think they're used in pari's zoity or something like that mod. Dunno where the tut is tho -
Date: Sat, Apr 24 2010 01:12:31QUOTE (eXcLuSiVeFXP @ Apr 15 2010, 12:55 AM) <{POST_SNAPBACK}>The crapsack (aka leftovers)
3x HGG (No tips!)
2x Ballsign (barrel+ink Only)
1x Sailor Gel Grip
1x Pentel RSVP (I kinda hate it's heavyness)
4x Pilot G2 Pens (+grip)
1.5x some cheap dr grip Substitute
8x Anyball Grip
2x Comssa caps
2x Keytyo pens (is possible leave the 2x Black Caps for an Bonkura mod)
1x Uniball Signo Tip
1x Uniball Signo Gel RT
So far, iam pretty noob at PS and ehh please exclude the following:
Comssa/Ballsign mod, some Pentel RSVP mod-a-like (MX?), G2 mod and just made a Grip Aviare Mod.
Thanks in advance
Any1? -
Date: Fri, Apr 30 2010 12:39:25
Hey I'm very, very new to penspinning... Haha just started like, a few days ago? Already got a basic fingerpass and quite a nice thumbaround going already though...
Anyway, I just made a (failed attempt) BICtory today, (cut the barrel instead of the ink tube -.-") and I bought a whole bunch of other pens too, anyone here mind helping see what other things I can make?
I can't make any with HGG (which really limits my options, I know) because I can't find them in Singapore =(
Pentel Energel
Uniball Signo 207 (The retractable one)
G2s
G3s
Pilot Super Gel
Monami Line Ball
Pilot Choose -
Date: Fri, Apr 30 2010 13:16:05
PSjj,
do try to find other pens as i cannot seem to think of any mods to make with those pens. -
Date: Fri, Apr 30 2010 20:31:36
Connect a G3 to a G2 back barrel the same way you would making a firefly g3 (shown here http://www.upsb.info/wiki/index.php?title=...y's_G3_Mod) and then double cap it with G3 caps? Possibly insert grips/screws/etc. into G3 caps for more inertia.
Alternatively if you have the metal-tipped g3 you could single cap it and glue a g3 tip or two to the other side and add weight to the cap to balance it out. -
Date: Fri, Apr 30 2010 22:24:32
Woops didn't see the G3s. You can make HG2G3, though not completely. Or try this mod:
from left to right:
g3 tip > g2 grip > g3 body > g3 grip in g3 cap> some tip in g3 cap > g3 cap. -
Date: Fri, Apr 30 2010 22:28:54QUOTE (eXcLuSiVeFXP @ Apr 23 2010, 05:12 PM) <{POST_SNAPBACK}>Any1?
you can make a signo tipped hcmx. -
Date: Sat, May 1 2010 08:48:26
Thanks for the replies ^^
-
Date: Mon, May 3 2010 14:11:27
Any idea what pen mod i can do with only the following pens?
-Pilot G2
-Pilot G3
-Uniball Signo
-Pilot Supergel
-Pilot Super Grip
-Pilot Dr. Grip
:huh: -
Date: Wed, May 19 2010 06:34:45
hey guys
i found uniball signos broad yesterday which is weird there actually not available in austria xD
well what can i make from this
many many comssas and comssa caps
Signos broad
super pirats
Pilot Super Grips
HGG´s
Stabilo flashs (google them ^^)
Tornado Grips and caps
Dr Grips (whole pen, preferably ill keep them though)
No tornado mod plz i hate the mod xD -
Date: Wed, May 19 2010 17:24:59
Try this.. its based on my personal G3 mod:
from tip to cap -
Signo Tip -> Signo Tip covered by HGG Grip -> Super Pirats or HGG Barrel (depending on ur preference and how it attachs) -> Multiple layers of Signo Broad grip (curl one into another) + Signo Tip in the end into a Signo Broad Cap
Experiment with the multiple layers of signo broad grips to obtain COG = COP.
PrinceXD~
ps: This AINT my personal G3 mod.. LOLQUOTE (DeviDemon @ May 19 2010, 04:34 PM) <{POST_SNAPBACK}>hey guys
i found uniball signos broad yesterday which is weird there actually not available in austria xD
well what can i make from this
many many comssas and comssa caps
Signos broad
super pirats
Pilot Super Grips
HGG´s
Stabilo flashs (google them ^^)
Tornado Grips and caps
Dr Grips (whole pen, preferably ill keep them though)
No tornado mod plz i hate the mod xD
-
Date: Thu, May 20 2010 05:29:11
what's the best mod I can do with:
HGGs
RSVPs
Sailors
G3s
G2s
Signos
Anyballs
not necessary to use them all -
Date: Thu, May 20 2010 06:52:44QUOTE (davidguy @ Feb 25 2010, 09:21 AM) <{POST_SNAPBACK}>you know how when you make a comssa you still have the extra uncapped sign pen? i was wondering what you guys do with them because honestly I'm not sure where to put it since it doesn't have a cap
i make a self mod from it haha a kind a copy of minwoo mod and burhyan sc but without comssa cap(it use bic stic grip cap and i also cut the barrel to make it shorter -
Date: Thu, May 20 2010 10:04:20
signo tipped RSVP MX.
PrinceXD~QUOTE (Obscura @ May 20 2010, 04:29 PM) <{POST_SNAPBACK}>what's the best mod I can do with:
HGGs
RSVPs
Sailors
G3s
G2s
Signos
Anyballs
not necessary to use them all
-
Date: Thu, May 20 2010 11:09:30QUOTE (Obscura @ May 20 2010, 02:29 PM) <{POST_SNAPBACK}>what's the best mod I can do with:
HGGs
RSVPs
Sailors
G3s
G2s
Signos
Anyballs
not necessary to use them all
MXs and its variations
HG2G3
Any-X
G3 mods
Clear Body KT
etc.
-
Date: Wed, May 26 2010 11:51:09
any easy to make(not alot materials) using Signo's?
i can get RSVP and HGG but it will take a week so..(next week ill go to get them...) -
Date: Thu, May 27 2010 00:13:47
herm... what "good" mods can i make with these.
hgg's
comssa caps
ac subs
crayola washables
signos
rsvp but no grips
g spec grips
anyball grip
bic round stic
zt tips
monami 153's
beifa's -
Date: Sat, May 29 2010 02:39:38QUOTE (miyat @ May 26 2010, 05:13 PM) <{POST_SNAPBACK}>herm... what "good" mods can i make with these.
hgg's
comssa caps
ac subs
crayola washables
signos
rsvp but no grips
g spec grips
anyball grip
bic round stic
zt tips
monami 153's
beifa's
MX? But no grips so... >.>
iMatt's version of the Baaron DC
Stuhl Mod with signo tips subbed in and super tip body or ac body subbed in
Body + Comssa Caps + Signo Tips + Grips?
-
Date: Sat, May 29 2010 02:42:00QUOTE (Nachoaddict @ May 28 2010, 09:39 PM) <{POST_SNAPBACK}>MX? But no grips so... >.>
iMatt's version of the Baaron DC
Stuhl Mod with signo tips subbed in and super tip body or ac body subbed in
Body + Comssa Caps + Signo Tips + Grips?
ooo nice nice. yeah i thanks. I'll probably try making a baaron dc mod then. ty ty
-
Date: Sat, May 29 2010 02:45:14QUOTE (miyat @ May 28 2010, 07:42 PM) <{POST_SNAPBACK}>ooo nice nice. yeah i thanks. I'll probably try making a baaron dc mod then. ty ty
Just note that Baaron never released an official tut. This is simply a remake by iMatt. -
Date: Sat, May 29 2010 08:47:02QUOTE (Obscura @ May 20 2010, 05:29 AM) <{POST_SNAPBACK}>what's the best mod I can do with:
HGGs
RSVPs
Sailors
G3s
G2s
Signos
Anyballs
not necessary to use them all
G2 vortex,MX,toro MX -
Date: Mon, Jun 7 2010 10:36:12
Hey,
I have a bunch of RSVP sunbursts.
What can i do with em???
I am willing to purchase other pens to make complete mods.
Thnx -
Date: Mon, Jun 7 2010 11:44:40QUOTE (MrRichoMagic @ Jun 7 2010, 05:36 PM) <{POST_SNAPBACK}>Hey,
I have a bunch of RSVP sunbursts.
What can i do with em???
I am willing to purchase other pens to make complete mods.
Thnx
You could make a...
RSVP MX? -
Date: Tue, Jun 8 2010 19:42:18
Hey guys. today i went to walmart and got a big pack of gel grips and those erasers you stick on the ends of pencils. I also went to daiso and got some metal caps for pencils. i used these for some good mods. any one else used these?
-
Date: Tue, Jun 8 2010 20:42:57QUOTE (MrRichoMagic @ Jun 7 2010, 03:36 AM) <{POST_SNAPBACK}>Hey,
I have a bunch of RSVP sunbursts.
What can i do with em???
I am willing to purchase other pens to make complete mods.
ThnxQUOTE (Biji @ Jun 7 2010, 04:44 AM) <{POST_SNAPBACK}>You could make a...
RSVP MX?
Sunburst mx you mean?
Evo sunburst
RSVP body kt
hsmx -
Date: Tue, Jun 8 2010 23:35:19QUOTE (Json The Shoe @ Apr 21 2010, 07:51 AM) <{POST_SNAPBACK}>i was just scrounging up some old stuff and found some old...fibracolor markers? can they be used in anything??
Zolty mod
spoko gripped, airfit tipped, fibracolour body. hope you can figure that out -
Date: Wed, Jun 9 2010 01:09:56QUOTE (Colin @ Jun 8 2010, 06:35 PM) <{POST_SNAPBACK}>Zolty mod
spoko gripped, airfit tipped, fibracolour body. hope you can figure that out
I believe you forgot that Zolty mod also uses profile/anyball grips -
Date: Wed, Jun 9 2010 19:32:19
http://www.upsb.info/forum/index.php?showtopic=1437
Use this thread next time
DC a pencil with those metal caps, and you get a Jap Pencil mod
a pencil with two eraser caps has nice momentum too -
Date: Fri, Jun 11 2010 19:28:54
What mods can i do with:
Super Tips
RSVPs
Pilot Super Grip (G2 grip as well)
Cis Soft Fluo
Comssas
HGGs (grip and tip only)
Anyball/Profiles Grip
Already have:
Buster CYL
RSVP MX
STek Body
Flexibe MX
Metallic Comssa
Thanks -
Date: Fri, Jun 11 2010 20:45:23
RSVP ST
-
Date: Tue, Jun 15 2010 09:22:36
Hai..
What mods can I do with:
G1,G2,G3, HGG's, Slider's, Super pirates, Gripmatics, super grips,bp's matic, supergel's,...
I ve made:
G3 mx( too short)
g3 mx^2( like it^^)
E2B G2
Imag1ne mod -
Date: Tue, Jun 15 2010 09:29:35
Hybrid HGG^2
Hybrid -DC- HGG -
Date: Tue, Jun 15 2010 10:02:21
HG2G3
Minovate DC
Minovate SC (need comssas and dr. Grip. Just search minwoo mod on YT)
Monami 153 MX or w/e it's called. -
Date: Tue, Jun 15 2010 20:58:03QUOTE (riffy @ Jun 15 2010, 04:22 AM) <{POST_SNAPBACK}>Hai..
What mods can I do with:
G1,G2,G3, HGG's, Slider's, Super pirates, Gripmatics, super grips,bp's matic, supergel's,...
I ve made:
G3 mx( too short)
g3 mx^2( like it^^)
E2B G2
Imag1ne mod
Idk if this is a mod or even if it would be balanced but try: G3 cap with hgg tip and grip in cap attached to super pirat body. then leave on the cap and use a G2 grip with a gripmatic tip in grip.
(how it lays out from left to right)
g3 cap-hgg tip-hgg grip-super pirat (cap included)-g2 grip(over pirat cap)-gripmatic tip. -
Date: Wed, Jun 16 2010 01:10:03
Hey Guys,
If you could let me know what I could do with this that would be great
-Dr.Grip Gel Mechanical pencil
-Staples Xeno | x4
-Super Tip | x2
-Pilot Precise V5 RT | x2
-SRX Edge Mechanical pencil | x3
-Uni-ball Vision Needle
-Pentel RSVP| x2
-Uni-Ball Vision Elite | x2-Uni-Ball Micro
-Marvy Calligraphy Japan
-Zebra F-301
-Papermate Eagle
-Papermate Write Bros
-Bic Ultra Round Stic Grip
-Bic Crystal
I also have miscellaneous parts and random pens that I can use for; tips, weights, etc. I made my account a long time ago, but am just now really getting into penspinning and want a cool mod to start off with. Thanks in advance everybody!
Alex W -
Date: Wed, Jun 16 2010 01:32:37
RSVP CX
RSVP V1
Bictory..
Thats all i can see -
Date: Wed, Jun 23 2010 08:42:53
You forgot RSVP MX (just sub the grip with Supergrip or G2 and the tip with Hi-Tec C and you got a toro-themed mx
) -
Date: Thu, Jun 24 2010 02:21:21
What mod could I do with:
Uniball Signos
1 Dr. Grip
1 Dr. Grip Ltd.
G2's
RSVP's
Papermate Profiles
Zebra Z-Grips
I would prefer something with good weight and length
