UPSB v3
Tutorials Pending Approval / RHG2
Hybridgelgrip+G2
-
Date: Wed, Dec 10 2008 07:20:10
RetractableHybridG2
materials needed
hgg
g2
scizors
g2inktube
spring
any inktube with stopers (part that stops springs from moving up the ink tube)
knife or boxcutter
hgg top
grips
step 1.
take apart g2
remove the top clip and the ring the clip is on unscrew bottom and remove
step 2.
take inktube from g2 and cut it about 4 cm from the top
step 3.
remove parts from the hgg
step 4.
keep only the top and cylinder of hgg
step 5.
use knife or drill to make a bigger hole in the bottom of the hgg big enough for the pens tip to fit through but not the inktube
step 6.
put spring in the bottom of hgg and put the ink tube in to the hgg then take the piece you cut from the g2s' inktube and put it on the top of the inktube you put in the hgg
step 7.
put the hgg in into the g2 the same way you would do an RSVP
step 8.
click to make sure it works and add the top to the bottom of the hgg then put grips where you want depending on what you like
ill add a pic and pics of assembly as soon as i can -
Date: Wed, Dec 10 2008 13:52:19
pictures would be a great help
also, stats of the mod would be great too -
Date: Wed, Dec 10 2008 14:28:14
please use the proper tutorial formatting. http://www.upsb.info/forum/index.php?showtopic=12632 it is there for a reason.