UPSB v3

Tutorials Pending Approval / Simple Mx Variation

What are your thoughts?

  1. wtf@cody
    Date: Fri, Dec 26 2008 05:25:27

    Since all the newcomers are making variation topics for mods that will never be used or never going to be like, i might as well make a tut for an improved mx i spin alot. I dont care if you are going to say this is a pointless topic or should of been asked for by some people. I just want to share with you guys

    Need:

    • Rsvp (1 Body, 2 Grips)
    • Signo DX
    • First band of anyball grip and last band
    • Tape


    1. Gather everything.


    2. Disassemble the RSVP and sand down the bump in front of the grip.


    3. Take one of the RSVP grips and cut the ring off. Take the other and cut it just above the second set of dimples above the ring. (Compared to normal grip)


    4. Take the grip with out the ring and slide it all the way into the back of the RSVP cap. You may need to fold it in half to slide it in. Break the clip off if you want to.


    5. Take the other cut grip and slide it into the cap now. You may want to put some crazy glue on the cut grip to make sure it stays in the cap.


    6. Slide it on to the back of the RSVP


    7. Wrap tape around the front to keep the Signo DX grip on. The last anyball band will need the tape too. You may need to mess with the tape, the anyball band will need more tape than the Signo grip.

  2. wtf@cody
    Date: Fri, Dec 26 2008 05:29:42

    8. Slide the last anyball band on then the Signo grip.


    9. Take some tape(teflon, sticky tack, or anything like that will work) and wrap it around the tip until the Signo tip fits snugly.


    10. Put the tip on and the first anyball band over the tip.


    11. You're done, now spin! (Put insert in if you want)


    Additional Steps:

    • Remove the writing on the barrel
    • Cut a design into the grip and put paper under it instead of tape.
    • Shorten Signo grip and add more anyball.


    Stats:
    CoG = Cop
    Length = Mx
    Weight = Variation ~ MPFX

  3. Jamie Enns
    Date: Fri, Dec 26 2008 05:42:41

    i really like this. Great sub for those without HGG

    thanks

  4. Stevieboy7
    Date: Fri, Dec 26 2008 05:45:05

    Good job.
    Good pics
    Good Tutorial.
    will hopefully shut up all the nubs.
    Yay!

  5. K4S
    Date: Fri, Dec 26 2008 05:53:43

    QUOTE (Stevieboy7 @ Dec 26 2008, 12:45 AM) <{POST_SNAPBACK}>
    Good job.
    Good pics
    Good Tutorial.
    will hopefully shut up all the nubs.
    Yay!

    hahahaha :>

  6. wtf@cody
    Date: Fri, Dec 26 2008 05:59:23

    QUOTE (Stevieboy7 @ Dec 26 2008, 12:45 AM) <{POST_SNAPBACK}>
    Good job.
    Good pics
    Good Tutorial.
    will hopefully shut up all the nubs.
    Yay!



    hahah hopefully
    i dont like those crappy variation topics coming up, so i had to make a good variation biggrin.gif
    that and as jamie said, it does help those without hggs biggrin.gif

  7. CaliMartinio
    Date: Fri, Dec 26 2008 06:10:35

    This has been done before but kudos for the effort.

  8. wtf@cody
    Date: Fri, Dec 26 2008 06:32:08

    QUOTE (CaliMartinio @ Dec 26 2008, 01:10 AM) <{POST_SNAPBACK}>
    This has been done before but kudos for the effort.


    wat
    really?
    damn it!
    i thought i did good >.<

  9. CaliMartinio
    Date: Fri, Dec 26 2008 06:49:58

    QUOTE (wtf@cody @ Dec 25 2008, 10:32 PM) <{POST_SNAPBACK}>
    wat
    really?
    damn it!
    i thought i did good >.<


    You did do good, I prefer all my MXs to be made this way

  10. riverboy
    Date: Fri, Dec 26 2008 10:59:49

    Its pretty cool..

  11. Swifty
    Date: Sat, Dec 27 2008 04:14:45

    isnt this on the wiki? >_>

  12. wtf@cody
    Date: Sun, Dec 28 2008 04:42:32

    QUOTE (Swifty @ Dec 26 2008, 11:14 PM) <{POST_SNAPBACK}>
    isnt this on the wiki? >_>



    uhh no (?)

  13. Swifty
    Date: Sun, Dec 28 2008 05:10:11

    http://www.upsb.info/wiki/index.php/Engo_Blendo_DX

    My bad
    pretty much the same though

  14. Resonance
    Date: Fri, Jan 2 2009 21:01:54

    Nice stuff for the ones who can't get HGGs... good job ^^

  15. FrozenIce
    Date: Fri, Jan 2 2009 21:17:42

    Nice subs!

    I can now make an MX without an HGG. happyy.gif

    But on the serious side, I never knew that a Signo DX grip would work. I always thought it was too short, but adding Anyball grips does the trick.

    So yeah, once again, nice job! thumb.gif

  16. wtf@cody
    Date: Sat, Jan 3 2009 03:37:50

    QUOTE (Resonance @ Jan 2 2009, 04:01 PM) <{POST_SNAPBACK}>
    Nice stuff for the ones who can't get HGGs... good job ^^



    QUOTE (FrozenIce @ Jan 2 2009, 04:17 PM) <{POST_SNAPBACK}>
    Nice subs!

    I can now make an MX without an HGG. happyy.gif

    But on the serious side, I never knew that a Signo DX grip would work. I always thought it was too short, but adding Anyball grips does the trick.

    So yeah, once again, nice job! thumb.gif



    Thats why i made this, i had a bunch of signo dx's but no hgg's biggrin.gif Its the american friendly mx biggrin.gif






    Also, if you dont like seeing the flat space between the tip and profile band. use the last two profiles band instead of one.