UPSB v3

Tutorials Pending Approval / RSVP CyanX

Cyan's Mod 10 easy steps

  1. Cyanide
    Date: Tue, Jan 13 2009 00:44:28

    Stats
    -------------------------------------------------
    Name: RSVP CyanX
    COG: COP
    Length: 19.4 CM
    Weight: I need to weigh it.
    Style: One sided
    Writing-Mechanism: If you put ink in it can write if you take off grip.
    Ink-Type: RSVP
    Estimated-Cost: $8.00 to $10.00
    -------------------------------------------------
    Materials List:

    Materials
    x1 RSVP Body
    x2 RSVP Grip
    x1 RSVP Back Cap
    x1 RSVP Front Cap
    x1 UniBall Gel Impact Grip
    x2-4 UniBall Gel Impact Tips
    x1 Insert
    x1 (Recomended) X Acto Knife or Scissor\'s

    Pens Needed
    x4 UniBall Gel Impacts ( You can use lighter tips or less tips)
    x2 RSVP\'s
    x1 (Recomended) X Acto Knife or Scissor\'s

    Lighter
    x2 UniBall Gel Impacts
    x2 RSVP\'s
    x1 (Recomended) X Acto Knife or Scissor\'s
    -------------------------------------------------


    UPDATE: Durability Test

    These Pictures might be hard to see because I have bad quality.


    Spoiler:

    1. Take all Impact tips off.

    2. Get your other RSVP and take the grip off.

    3. Cut Grip in half. Doesnt have to be perfect.

    4. Put one half of a grip in the RSVP cap. Shove it in there as far as you can.

    5. Now put a Impact Tip in the same cap in the grip and shove it in as far as possible and dont break it.

    6. Now cut the last piece in half or make it a little smaller then half of the cut grip in and put another Impact tip in.

    7. Now take your other RSVP and take the grip off. Cut the grip 2/3 of the way.
    Now Put the bigger piece back on your RSVP where it was. It should look like this, and yes I changed the color to Cyan.

    8. Now take one of your Impact\'s and get the grip off. IT IS REALLY HARD TO GET OFF. So I bite it and break the plastic but it\'s probably bad for your teeth. Just get it off somehow.

    9. Now take the last two Impact tip\'s and put them in the grip. Sometimes if you make it wrong you should glue the two tips together so they dont fall out.

    10. Now your done have fun! Add an insert. Add some rings. Spin. Peace.



    There you go 9 easy steps. And if anyone makes my mod it would help if you post a picture of it.

  2. luke
    Date: Tue, Jan 13 2009 00:48:06

    waste of tips thumb.gif

    GG

    edit

    QUOTE (Cyanide @ Jan 12 2009, 07:44 PM) <{POST_SNAPBACK}>
    This is basically Kam's Impact MX mod but simpler and need's less parts.
    This mod is for people that dont live in japan and want to keep it simple.



    fail #1: impact mx needs 4 pens, this needs 6

    fail #2: japan and simple are oxymorons

  3. AwonW
    Date: Tue, Jan 13 2009 00:49:14

    QUOTE (luke @ Jan 12 2009, 04:48 PM) <{POST_SNAPBACK}>
    waste of tips thumb.gif

    GG

    Pretty much. wink.gif

  4. CPM8
    Date: Tue, Jan 13 2009 00:54:14

    Like Luke said, this thing uses way too many tips. It is also nothing like an IMX, which is meant to take impact, hence the name "Impact" MX. This thing looks like it's gonna break something with all the weight and basically only grips holding on the front tips. The name... it doesn't fit it at all. I thought it would be a combination of an IMX and MMX, but it's just a super heavy RSVP MX variation.

  5. Loanshark
    Date: Tue, Jan 13 2009 00:58:19

    Tut: shortened, x10

    1. Make an Mx, but use 4 signo tips instead of an HGG tip.

  6. Baaron
    Date: Tue, Jan 13 2009 00:59:15

    youre kidding right?
    This is ridiculously heavy and i doubt people would make this since we dont want carpal tunnel and it uses way too many materials
    Mods nowadays >.> Heavier and heavier. Waste of money

  7. FripメECツ
    Date: Tue, Jan 13 2009 01:02:46

    lol guys.

    Don't act like a KT or BusterCYL wouldn't weight as much as this pen. They weight way more.

    And yes.. only Mx with 4 tips.

  8. luke
    Date: Tue, Jan 13 2009 01:05:24

    those arent even the right impacts rotfl.gif

  9. b2kay
    Date: Tue, Jan 13 2009 01:10:40

    QUOTE (luke @ Jan 12 2009, 05:05 PM) <{POST_SNAPBACK}>
    those arent even the right impacts rotfl.gif


    they are almost exactly the same as the other impacts wink.gif

  10. Cyanide
    Date: Tue, Jan 13 2009 12:13:43

    Yes I have heard this uses too many tips and it it not as heavy as you think. You dont have to use this many tips. You can use 1 in each instead of 2 to make it lighter.


    I made it because well I dont know.
    11. Put in ink tube and and you can write!


    Spoiler:

    11. Put in ink tube and and you can write!

  11. shoeman6
    Date: Tue, Jan 13 2009 14:20:37

    QUOTE (Cyanide @ Jan 13 2009, 07:13 AM) <{POST_SNAPBACK}>
    it looks cool.

    FAIL.
    skyblue and black? ...

  12. Cyanide
    Date: Tue, Jan 13 2009 21:26:47

    QUOTE (Baaron @ Jan 12 2009, 07:59 PM) <{POST_SNAPBACK}>
    youre kidding right?
    This is ridiculously heavy and i doubt people would make this since we dont want carpal tunnel and it uses way too many materials
    Mods nowadays >.> Heavier and heavier. Waste of money


    Dude this is not nearly as heavy as a Impact MX it also is 10x easier to make then a Impact MX. Also all these materials can be found in America so there is no need to buy things on the internet. Sure it uses 4 Impact's but at least you dont have to order them online. You can make it look exactly like Impact MX just put some work into it. This is a simple mod and it's supposed to be heavy. Peace

  13. Loanshark
    Date: Tue, Jan 13 2009 21:41:11

    QUOTE (Cyanide @ Jan 13 2009, 04:26 PM) <{POST_SNAPBACK}>
    Dude this is not nearly as heavy as a Impact MX it also is 10x easier to make then a Impact MX. Also all these materials can be found in America so there is no need to buy things on the internet. Sure it uses 4 Impact's but at least you dont have to order them online. You can make it look exactly like Impact MX just put some work into it. This is a simple mod and it's supposed to be heavy. Peace



    If you've been around before and during the release of the Impact MX, you would see how this mod looks nothing like the IMX facepalm.gif The purpose of the whole Impact MX was to absorb IMPACT. Most pen mods here can't do that, which makes the IMX hard to make. This pen is nothing like the IMX in anyway, the name is contradictory and the mod overall is too fragile. This fails. Peace.

  14. Cyanide
    Date: Tue, Jan 13 2009 21:43:55

    Well sorry I will name it something else then. I named it with Impact because thats the pen it uses.

  15. torune-do
    Date: Tue, Jan 13 2009 21:58:27

    please use macro on your camera confusedsmilie.gif otherwise its all blurry, good pen btw , but i dunt think i'll use that meny tips tongue.gif

  16. Cyanide
    Date: Tue, Jan 13 2009 22:46:14

    QUOTE (torune-do @ Jan 13 2009, 04:58 PM) <{POST_SNAPBACK}>
    please use macro on your camera confusedsmilie.gif otherwise its all blurry, good pen btw , but i dunt think i'll use that meny tips tongue.gif


    Thanks! I will try to look for that macro thing next time.

  17. Stevieboy7
    Date: Tue, Jan 13 2009 22:52:39

    As if everyone is judgeing this pen to the impact mx...


    Spoiler:

    If you guys paid any attention:

    This prolly weighs exactly the same as impact mx....
    The only "impact" resistance that imx has is a rubber band and to use stickytak to put the tip on (OOoOoooO)
    Really?? you guys should be ashamed of urselves... this i basically the same pen minus the back end....

    Theyre both just MX plus weight.
    Stupid Fanboys


    But srsly dude, you should have looked around a bit?
    Post in Show off ur Pens, Post in "Has this Mod been done before", or ask someone.

    There are so many sources DIRECTLY infront of you in the form of stickies and threads showing you how to use the resources you are give.... just pleaseplease start to use them...

  18. PenCell
    Date: Tue, Jan 13 2009 22:57:09

    QUOTE
    As if everyone is judgeing this pen to the impact mx...


    Spoiler:

    If you guys paid any attention:

    This prolly weighs exactly the same as impact mx....
    The only "impact" resistance that imx has is a rubber band and to use stickytak to put the tip on (OOoOoooO)
    Really?? you guys should be ashamed of urselves... this i basically the same pen minus the back end....

    Theyre both just MX plus weight.
    Stupid Fanboys


    But srsly dude, you should have looked around a bit?
    Post in Show off ur Pens, Post in "Has this Mod been done before", or ask someone.

    There are so many sources DIRECTLY infront of you in the form of stickies and threads showing you how to use the resources you are give.... just pleaseplease start to use them...

    +1

  19. Cyanide
    Date: Tue, Jan 13 2009 23:09:20

    QUOTE (Stevieboy7 @ Jan 13 2009, 05:52 PM) <{POST_SNAPBACK}>
    As if everyone is judgeing this pen to the impact mx...


    Spoiler:

    If you guys paid any attention:

    This prolly weighs exactly the same as impact mx....
    The only "impact" resistance that imx has is a rubber band and to use stickytak to put the tip on (OOoOoooO)
    Really?? you guys should be ashamed of urselves... this i basically the same pen minus the back end....

    Theyre both just MX plus weight.
    Stupid Fanboys


    But srsly dude, you should have looked around a bit?
    Post in Show off ur Pens, Post in "Has this Mod been done before", or ask someone.

    There are so many sources DIRECTLY infront of you in the form of stickies and threads showing you how to use the resources you are give.... just pleaseplease start to use them...



    Thanks I guess?

  20. Santa
    Date: Wed, Jan 14 2009 00:19:13

    Probably weighs as much as Kuzu. scratchchin.gif

    add a a grip cut in there jackson.gif

  21. FrozenIce
    Date: Wed, Jan 14 2009 00:22:51

    Looks like a simple and easy mod to make, but just a quick heads up:

    Aside from what everyone else has said, it doesn't look like the Impact MX because there are no rings, like the real Impact MX.

  22. Cyanide
    Date: Wed, Jan 14 2009 00:33:13

    QUOTE (Santa @ Jan 13 2009, 07:19 PM) <{POST_SNAPBACK}>
    Probably weighs as much as Kuzu. scratchchin.gif

    add a a grip cut in there jackson.gif


    I dont know what you mean?

  23. FrozenIce
    Date: Wed, Jan 14 2009 00:37:43

    QUOTE (Cyanide @ Jan 13 2009, 04:33 PM) <{POST_SNAPBACK}>
    I dont know what you mean?


    You know, a fancy grip cut found on many Japanese G3 mods.

  24. Cyanide
    Date: Wed, Jan 14 2009 00:48:22

    Ya I need a g3. But I cant buy them in america lol. I got to try on penwish.

  25. Kuma♥
    Date: Wed, Jan 14 2009 01:37:56

    Im just gonna say a few things this reminds me of the KT^2 because of waste of tips and nothing special...

  26. Cyanide
    Date: Wed, Jan 14 2009 14:53:11

    QUOTE (Kuma♥ @ Jan 13 2009, 08:37 PM) <{POST_SNAPBACK}>
    Im just gonna say a few things this reminds me of the KT^2 because of waste of tips and nothing special...


    You dont have to waste tips you can use washers and stuff.

  27. Baaron
    Date: Wed, Jan 14 2009 15:09:47

    Just because you put a grip cut on a pen, it doesnt make it any better.

    And you said you can use screws and washers....it doesnt say anything about that in your tutorial. If you use those than its no longer your mod.

  28. PillarsOfValhalla
    Date: Thu, Jan 15 2009 23:20:07

    That is a waste of tips. dry.gif Go back to the drawing board, i think you are on the right track, just lessen the amounts of tips.

  29. Cyanide
    Date: Fri, Jan 16 2009 12:56:07

    QUOTE (PillarsOfValhalla @ Jan 15 2009, 06:20 PM) <{POST_SNAPBACK}>
    That is a waste of tips. dry.gif Go back to the drawing board, i think you are on the right track, just lessen the amounts of tips.


    Well I like spinning with it so...

    Check out my Durability test inspired by TEK

    Durability Test

  30. iMatt
    Date: Fri, Jan 16 2009 14:39:38

    I can see that you've been flamed to the stars and back by now.

    But, The real trouble is that this pen wasn't presented in the SOYP thread beforehand.

    If your going to release a new thread, don't try make it another pen.

    Saying things like, "You can make it look like an Impact MX if you put some work into it." contradicts the original need for a new mod. That implies that, "Well if you don't like it you can make it look like one that you do."

    The other part of this that it doesn't make efficient use of all the pens needed. Anyone can stack tips, but if you want people to like this mod, I personally say make it stand out, just ask, why should I make this MX variation when I can make a more popular one for cheaper and is more durable?

    I don't necessarily think is a bad pen, but I think it could definitely be presented better. thumb.gif

    Handy Tips ->
    FYI: Clean up the Tutorial a bit and just use my template.
    http://www.upsb.info/forum/index.php?showtopic=12632

  31. Cyanide
    Date: Fri, Jan 16 2009 14:46:33

    Ok thanks.

  32. Jtrophy
    Date: Mon, Jan 26 2009 03:25:08

    QUOTE (Baaron @ Jan 12 2009, 07:59 PM) <{POST_SNAPBACK}>
    youre kidding right?
    This is ridiculously heavy and i doubt people would make this since we dont want carpal tunnel and it uses way too many materials
    Mods nowadays >.> Heavier and heavier. Waste of money


    lol carpal tunnel ^^
    im sure people will get carpal tunnel in the future from spinning CYL xD

  33. pongpong
    Date: Sun, Feb 1 2009 09:41:18

    QUOTE (Jtrophy @ Jan 26 2009, 10:25 AM) <{POST_SNAPBACK}>
    lol carpal tunnel ^^
    im sure people will get carpal tunnel in the future from spinning CYL xD


    i read somewhere that carpel tunnel was caused by doing the same tricks over and over again with a heavy pen, spinning cyl will just make your hands extremely tired after a while

    umm, all the links of the pics are broken