UPSB v3

Tutorials Pending Approval / ECF MOD/Varation

A cheat pen well pretty much

  1. Kuma♥
    Date: Mon, Jan 19 2009 04:30:16

    This is the tut for the ECF variation or mod I ain't got time to argue which it is...
    E-Equal
    C-Cheat
    F-Fusion
    I know the name is kinda stupid you can just cut the crap and just call it the ECF


    Stats:
    20.2cm
    COG=COP
    Ryo Cheat ComssaDouble Sided
    Non-writable so far
    Cost $19-20

    Materials:
    2x Comssa
    2x Signo broad http://penwish.com/product_info.php?products_id=432
    2 or 4x Jedo
    2x G2
    2x Anyball/Profile
    2xRSVP or HGG

    Optional:
    Sailor Gel Pen

    Parts:
    2x Comssa Caps
    2x Signo tips and Caps
    2 or 4x Jedo tips
    2x G2 upper body/Clicker area
    2x top 3 small blocks and 1 bottom big block
    2x Rings of HGG or RSVP and Piece under grip

    Optional:
    1x Sailor grip divided into 2 blocks of 4
    Electric tape for color
    Teflon reduce noise

    TUT
    1. Cut G2 threads off should be 6.5 cm long after and cut barrel piece under grip of RSVP/HGG body to the biggest you can get it.


    2. Wrap an insert around RSVP/HGG piece (may need sanding) and put in the G2 barrel to connect them (it is sturdy) and put the ring of rsvp grip on the ends (optional add a thin layer of teflon to prevent rattling.


    3. Take 2 jedo tips put one in each side of the g2 barrel where the clicker should be (make sure to make it flush and don't push too hard). If you use four like me take the 2 additional tips put teflon or tape on both and guide one in each comssa cap (make sure to get it into the hole in the comssa cap)



    4. Cut and put either 3 blocks of the small side of anyballs on cap or 4 blocks of sailor grips on each comssa cap.


    5. Cut 2cm of signo broad cap from the big side put the block of anyball/profile grip in and put signo tip in make the signo tip flush with the inside of the grip.



    6. Put some tape (I used Electric) on the comssa caps put an insert 1.5 width and depending on how long the length what ever fits


    7. Assemble comssa caps should snap on the g2 barrel


    Done

    The strips of grip before the comssa caps are for moves where the pen usually slips helps catch em

    Some extra stuff for OTHER MODS

    The Signo broad cap can be cut and used for momentum f1r3fly g3 mod and momentum IMX

    For the f1r3fly g3 mod you need 2 broad caps
    For IMX you need 1 broad cap

    Credits
    Whoever created the insert I used
    Kam for mentioning some cheat things to make a pen a really cheap pen
    Penwish cause I used it for refrence to the signo broad

    Questions and Comments?

  2. schlynn
    Date: Mon, Jan 19 2009 05:02:23

    Thank you man. When I get the other jedo and stuff I'll make this thing. Can't wait.

  3. Kuma♥
    Date: Mon, Jan 19 2009 05:05:00

    Thx and I tried to make the mod parts easy to get since I live in the US and I can't get much w/o trading

  4. iMatt
    Date: Mon, Jan 19 2009 06:57:31

    Expensive as hell. But nice use of Spare parts though.

  5. Winterlocke
    Date: Mon, Jan 19 2009 07:04:27

    where does the firefly come in?

  6. FrozenIce
    Date: Mon, Jan 19 2009 07:30:50

    Looks nice and looks like it spins well. thumb.gif

    Uses quite a lot of Jedo tips though.

  7. Swifty
    Date: Mon, Jan 19 2009 07:35:59

    If youve guys got g3 caps laying around(idk why you would) but they are pretty much almost the same as a signo braod cap

    Otherwise it looks good ^-^
    clap.gif

  8. 2DK Iceguize
    Date: Mon, Jan 19 2009 08:27:34

    well some people would probably have a g3 cap lying around since a few of the Japanese g3 mods don't use the cap and replace it with a hyperjell.

  9. Mr.Squekers
    Date: Mon, Jan 19 2009 13:05:24

    Very nice! ^^

    but is that red comssa caps? ohmy.gif

  10. Cyanide
    Date: Mon, Jan 19 2009 18:13:23

    waste of tips happy.gif

  11. wtf@cody
    Date: Tue, Jan 20 2009 04:28:04

    QUOTE (Cyanide @ Jan 19 2009, 01:13 PM) <{POST_SNAPBACK}>
    waste of tips happy.gif


    This coming from the kid that uses 4 impact rt tips in one mod.....

  12. Kuma♥
    Date: Tue, Jan 20 2009 05:58:12

    I said 2 or 4 jedo tips I used 4 for weight preference and yes they are red comssa caps

    The broad signo cap can be used for momentum firefly in place for the dr.grip grip sections

    The reason for broad caps instead of g3 caps and stuff cause its available in the US and usually scrap

  13. XternalメDGN
    Date: Tue, Jan 20 2009 08:34:14

    QUOTE (Cyanide @ Jan 20 2009, 02:13 AM) <{POST_SNAPBACK}>
    waste of tips happy.gif

    http://www.upsb.info/forum/index.php?showt...=15751&st=0
    Dont be a hypocrite man. im sure this looks better than that CyanX with 4 impact rt tips.

    Back on topic
    Nice to see that u made the insert my godsister made. her name's luvingfrh on UPSB^^

    EDIT:Anyone wants the URL, its http://www.upsb.info/forum/index.php?s=&am...st&p=204187

  14. Kuma♥
    Date: Tue, Jan 20 2009 21:01:11

    Thanks for the comments and

    I forgot to put down pros and cons

    Pros:
    Requires parts easily obtained
    Weight can be changed to a certain extent
    More of a cheat pen since the tips don't change the length and look
    Insert able body and cap
    Doesn't cost over 30$ like some Japanese mods
    Uses spare parts
    Sturdy

    Cons:
    Made by a person in the US (me)
    Not the easiest mod to make
    Not the cheapest pen
    Wasn't supported or had anything to do with a famous spinner seemingly that every Japanese mod gets approved

  15. G10
    Date: Sun, Jan 25 2009 07:47:40

    Nice mod...too much pens though. mellow.gif

  16. Kuma♥
    Date: Mon, Jan 26 2009 05:14:42

    Even though it uses a lot of pens the cost isn't much and uses spare parts