UPSB v3

Approved Tutorials / flash g3 mod(and all white version

  1. flash
    Date: Mon, Feb 2 2009 17:07:24

    hi,i'am flash,i from FPSB andi speak english very bad so dry.gif
    So i'm gonna presents you the Flash G3 Mod and his All White Version

    And the FPSB's spinners enjoy my mod ( ahahah ) , hi is quite famous

    flash g3 mod original version


    in color by megas


    and all white version^^



    Spoiler:

    therefore materials:
    - Hyper Jell
    -g3
    -HGG-grip
    -A piece of grip type HGG
    -2 Tip de signo
    -1 Tip of g1
    - Tape

    Photo details:

    uh .. it was not the number but when sending they disappeared a little short:
    1 = inktube of "hyper Jell
    2 = body g3
    3 = Hyper Jell cap
    4 = grip of hyper Jell
    5 = tip de signo
    6 = tip of g1
    7 = 2 signo tip
    8 = piece grip
    9 = HGG grip


    then for the body
    1 = remove the grip
    2 = 8 square the filing of g3
    3 = the file the Ruffle g3
    4 = a little filing before (not the screw but not the end (of length)
    5= put some tape at the back of the body
    6= put a Isert

    for the front:
    1 = take inktube of Jell hyper and cut about 5 mm at the rear
    2 = on the front of the inktube put tape on the inktube ruffle 2 turns should suffice
    3 = inktube put the body through the front of the body (see photo) (if you did not file its not happen ^ ^)

    4 = screw the tip of the g1 not live (if you do not have the lime will have a hard time screwing) will leave the mine)
    5= to the tip of signo (save a little paw was fixed in the bottom of the tip) over the tip of g1)
    6= 1 around put tape on the two tips and a bit on the front of the body (the same piece of tape)

    7= set piece grip followed by the HGG grip

    and to finish the cap:
    1= mettre le tip de signo dans le cap avec 1 tour de scotch autour 1 = save the signo tip of the cap with 1 round of scotch around
    2= couper le grip de hyper jell de 5 mm 2 = cut the grip of hyper Jell 5 mm
    3= mettre le grip de hyper jell dans le cap = 3 to the grip of hyper Jell in Cape

    4= in the direction of hyper Jell on the body



    Spoiler:

    materials for all white version
    -hyper jell
    - HGG-2grip white
    -6/7mm Grip of rsvp
    -2 Tip de signo
    -1tip-G1
    - Tape

    photo details (all white version)

    1 = inktube of hyperjell
    2 = body g3
    3= hyperjell cap
    4 = 2 HGG grip
    5 = 2 tip of signo
    6 = 1 tip of g1
    7 = grip of rsvp / HGG of 6/7mm

    then for the body
    1 = remove the grip
    2 = 8 square the filing of g3
    3 = the file the Ruffle g3
    4 = a little filing before (not the screw but not the end (of length)
    5= put some tape at the back of the body
    6= put a Isert

    the front (all white version)
    -Like the orginal version , except for the grip (taking a grip HGG cut about 5mm, use this game for Step 7 (keep ll'autre from the grip cap for)

    for the cap (all white version)
    1 = put a signo tip of the cap with 1 round of scotch around
    2 = cut a piece of rsvp grip of 6/7mm
    3= to the grip piece of rsvp in the grip of HGG
    4 = meter the HGG grip in the cap
    5= Cape hyperjell on the body












    22gr weight (slightly heavier than a kt)
    cop = cog
    size = 19.5cm

  2. luke
    Date: Mon, Feb 2 2009 22:14:23

    we have a saizen competitor i see

  3. テoh!
    Date: Mon, Feb 16 2009 22:40:33

    i doubt it is actually 22g dry.gif

  4. G.lanz
    Date: Wed, Feb 18 2009 17:04:20

    Neat looking, but uses to many pens to make IMO.

  5. Pensharp
    Date: Wed, Feb 18 2009 21:28:37

    QUOTE (G.lanz @ Feb 18 2009, 12:04 PM) <{POST_SNAPBACK}>
    Neat looking, but uses to many pens to make IMO.


    looks cool, to many pens.

  6. Asterisk*
    Date: Thu, Feb 19 2009 03:27:02

    I'd make it if theres a sub for the g1 tip, any one know if there is?

  7. K2
    Date: Thu, Feb 19 2009 03:33:29

    uh...a KT weighs about 16 grams. so your mod is probably around 17 grams?

  8. Nnameless
    Date: Fri, Mar 6 2009 07:31:30

    umm ps i still dun understand the white one

  9. Might
    Date: Fri, Mar 6 2009 13:46:56

    Its impossible that your mods weight is 22g. I think its about 16-17g.

    You can sub G1 with Hi-Tec C tip. You can say that this is the same tip, it has same weight and form.

    Yeah, I have a loooot G1 biggrin.gif

  10. pongpong
    Date: Sat, Mar 7 2009 15:05:45

    QUOTE (Might @ Mar 6 2009, 08:46 PM) <{POST_SNAPBACK}>
    Its impossible that your mods weight is 22g. I think its about 16-17g.

    You can sub G1 with Hi-Tec C tip. You can say that this is the same tip, it has same weight and form.

    Yeah, I have a loooot G1 biggrin.gif


    buts hi-tec c are a lot more expensive

  11. Chobi
    Date: Sat, Mar 14 2009 07:35:26

    Can you sub the G1 tip with a G3 tip?

  12. Jamx
    Date: Mon, Apr 6 2009 10:19:54

    QUOTE (K2 @ Feb 19 2009, 11:33 AM) <{POST_SNAPBACK}>
    uh...a KT weighs about 16 grams. so your mod is probably around 17 grams?

    kt weighs about 18 grams i checked...

  13. Shrouded Figure
    Date: Mon, Apr 6 2009 11:23:17

    Jam, u wanna buy my comssas???

  14. Chobi
    Date: Fri, Apr 10 2009 04:47:51

    I kinda don't get the tut. :\

    @SF: Stay on topic.

  15. daryl1000
    Date: Fri, Apr 10 2009 05:37:40

    agreed with chobi can someone translate it better?

  16. iamk34n3
    Date: Fri, Apr 10 2009 05:40:09

    Its not that hard of a mod.

    Sand front of g3 down, cut hyperjell inktube, put g1 then signo tip. Thicken the inktube with tape, tape the tips together, and put an hgg grip over the top.

  17. Swifty
    Date: Sun, Apr 12 2009 22:11:44

    its 17g. i checked. no way its near 22g.