UPSB v3
Approved Tutorials / G1-2 BIC
-
Date: Sat, Oct 27 2007 19:13:23
G1-2 BIC
Info:
- Lenght: 21 cm
- Weight Medium
- COP=COG
Parts needed:
- One BIC Round Stick Cap
- 2x Pilot G2 Grip
- 2x Pilot G1 Cap
- BIC Round Stick (with cap)
Directions:
1. Cut of clips from both BIC caps.
2. Cut of clips from both Pilot G1 caps.
3. Cut of those little edgings on Pilot G1 caps.
4. Take out the plug on the back of BIC Round Stick.
5. Insert ink tube from another BIC Round Stick.
6. Attach both BIC caps to BIC Round Stick body.
7. Put on the Pilot G2 grips on both BIC caps.
8. Put on the Pilot G1 caps on both BIC caps (so the Pilot G1 caps are in the grips).
9. Put something heavy into both BIC caps if it's too light for you.
Pros:
- Very balanced
- Durable
- Good for infinity tricks
- Really good for spinning (try it)
Cons:
- G1 caps can break after lot of hits
- Pieces of BIC caps can be quite disturbing
- Quite slippy
It's great for spinning. Try it on your own. If you have any questions, write on board or on my e-mail: [email protected] -
Date: Sat, Oct 27 2007 19:32:52
at least make it neater. but it might spin good.
-
Date: Sat, Oct 27 2007 19:36:19
it looks heavy...
how would you compare it's weight?
is it's weight closer to.... -
Date: Sat, Oct 27 2007 19:42:37
Lighter than DR. KT but heavier than comssa and RSVP MX
-
Date: Sat, Oct 27 2007 20:32:23
The mod looks alright. If you clean it up it'll look a lot better.
-
Date: Sat, Oct 27 2007 20:36:53
What do you mean: clean it up?
-
Date: Sat, Oct 27 2007 20:49:05
It pretty much just means make it a bit neater. If you can, try to get rid of the big bulges made by the cap. Overall I think the mod would be a good spin. But my personal preferance is for pens not to have bulges or anything.
-
Date: Sat, Oct 27 2007 20:50:07
Are those even bic caps? Is that even a bic stick?
looks pretty nice though
-
Date: Sat, Oct 27 2007 20:56:20
That bulg is useful for infinity tricks
In fact, that is Rosenart, not BIC, but only difference beetwen a Rosenart and BIC is, that Rosenart caps are a bit slipper. -
Date: Sat, Oct 27 2007 22:54:02
If there Roseart... why is it a bic mod?
-
Date: Sat, Oct 27 2007 22:57:59
he calls it bic because it can be made with a bic mod, and more people have bics compared to roseart pens
-
Date: Sat, Oct 27 2007 23:09:22QUOTE (nevets123 @ Oct 27 2007, 05:57 PM) <{POST_SNAPBACK}>he calls it bic because it can be made with a bic mod, and more people have bics compared to roseart pens
but still...its a roseart pen...
roseart mod (can be made with bics too)...haha that should be the title of this...
but anyways...it looks nice...ya i bet if you chose better colors for the g2 grips
cuz the caps nicer (idk if you cut the clips of the caps but they look all bad).
maybe sanded down the other caps a bit. it would look pretty sweet. -
Date: Sun, Oct 28 2007 07:21:20
"(idk if you cut the clips of the caps but they look all bad).
maybe sanded down the other caps a bit. it would look pretty sweet."- What do ya mean? (You know, I'm asking coz I'm not so good in english, I don't know all of this specific speech) -
Date: Sun, Oct 28 2007 07:32:16
I called it BIC, because i thought, that none of you will know what is Rosenart. And it is nearly the same as BIC.
-
Date: Sun, Oct 28 2007 16:52:58
do the caps of the G1 fit ON the cap of the rosenart/bic?if they do put them ON the rosenart/bic cap and make the grip cover all of the cap not just part of it for it to look better IMO.
If you can't put it on, only on top...still make the grip cover all parts of the cap...you can make it sort of a ballsign mod grip syle thingy but make the grip on the first grip also stick out...if you can cover all but want a sort of ballsign mod style then put it half of it inside out so it's thicker...this is just IMO...
-
Date: Sun, Oct 28 2007 20:32:00
Thanks for advice.
-
Date: Sun, Nov 4 2007 09:28:01
Where do u get Rosenarts? I hope u can get in Australia..
-
Date: Mon, Nov 5 2007 19:06:47
You can use BIC Round Sticks (and in fact you should), so you shouldn't have any problem to get them.
-
Date: Mon, Apr 14 2008 13:28:51
So mainly its just like a BICtory with G2 grips and G1 tips?
-
Date: Mon, Apr 14 2008 21:09:31
its an alright starter mod i'll give ya that. but in all honesty, whenever you make a pen you need to think, Why should i spin this over [insert similiar or better mod] Just keep that in mind.
in the USA G1's are non-existant along with G3's. And i'd say try cleaning up the mod as TEk mentioned, maybe an all black barrel with black caps and red grips. -
Date: Mon, Apr 14 2008 21:55:18
Looks a little bit similar to the Cerebic Mod by ellusion67.
-
Date: Thu, Apr 17 2008 19:39:49
i made this along time ago whenever u posted the tut in ucpsb. but i thought that g1 caps were the same as easy touch caps so i used those. i really like the mod and i used it for a very long time.
-
Date: Wed, Oct 1 2008 16:40:42
Oh thanks
In fact, G1 caps can break after about 2 months of spinning (it depends on... err... everything ;P). But I don't use them to anything else, so why not this mod 
I didn't use any other colour for this mod, cause it was the beginning of my penspinning adventure. You know, when you start, you like only dark colors (usually). And i sanded it down, and it looks much better Also had some fun with grips cutting and now it looks even better than better
I really recommend this mod (sorry for not being humble)
Keep spinning, cause "Dum spiro spinnero"
Me (xD)