UPSB v3
Regular Pen Discussion / rsvp body is not straight
just read it :P
-
Date: Sat, Feb 14 2009 12:42:43
eey
i bought my RsvP MX a while ago and i noticed that a body of a rsvp is not straight the front is a little bid lower than the back its kinda annoying.
are there other versions like razzle dazzle or colors who are straight? -
Date: Sat, Feb 14 2009 13:08:53
wtf RSVP bodies are straight
-
Date: Sat, Feb 14 2009 13:35:04
Damaged/warped barrel?
-
Date: Sat, Feb 14 2009 13:56:21
I believe what you meant was the hgg tip on ur mx isnt straight? Idk cuz i dont really understand what you are saying..
-
Date: Sat, Feb 14 2009 15:40:20
wtf...rsvp bodies are straight maybe your eyes have problems..
-
Date: Sat, Feb 14 2009 16:26:55
They are straight.
Check if the grip has anything underneath or not put on properly. Check if the tip is put on nicely. It should fit. If there're uneven layers of taflon tape, the HGG tip will be slightly bent. Lastly, check if your cap is on right. -
Date: Sat, Feb 14 2009 17:02:47
A picture would really help.
-
Date: Sat, Feb 14 2009 19:02:41
omg god they dont even believe me XD
omg i dont even know how to add a pic >.<
but i am 100% sure the front is 1mm i measured it maby you think ooooh only 1mm but its anoying realy
but that can be my fault maby its just anoying becuz the COG is not at COP
*edit*
front
i think you guys dont understand i dont mean that its like not straight like its bend but the front is 1mm smaller in big lines the MX looks like this / \
back
sorry for my bad english -
Date: Sat, Feb 14 2009 19:51:48
Ok heres a MX
Now heres a closeup of a MX with a regular rsvp body
Are you talking about how this part isn't straight? -
Date: Sat, Feb 14 2009 19:55:07
uhm.. no
i mean just before the cap is 1mm thicker
than just after the grip
its hard to explane if you dont speak english that wel :/ -
Date: Sat, Feb 14 2009 19:58:51
The rsvp backplug doesn't line up perfectly with the rsvp body. The cap is also thicker than the rsvp body.
-
Date: Sat, Feb 14 2009 20:03:27
is it posible that i have a fake rsvp cus when i get my insert out of it, it isent straight too even less
-
Date: Sat, Feb 14 2009 20:07:48
NO. That just means your insert was either not cut straight, or you can't take it out straight. -________________-
And I'm sure if you bought it off somebody, it is a real MX.
So did I answer your question yet? -
Date: Sat, Feb 14 2009 20:10:19
ok XD you guys can stop
i am sure i am not gonna get the anser i am going te measure it with something better and ill see....
thnx for trying sorry for the stupid question if you think that XD
*edit*
btw its right that the MX isent balanced well right? -
Date: Sat, Feb 14 2009 20:12:42
Wait are you saying it is like This shape for the body, only less exaggerated. I wouldn't worry about it if its only a mm though
\ /
\ /
\ /
EDIT
It isn't keep the spaces when I post >_<, just try and quote this post to see what I tried to draw with slashes poorly XD -
Date: Sat, Feb 14 2009 20:18:40
yep thats right cuz i saw what you tried to draw when i pressed reply
and i think i dont like the pen becuz its not balanced not becuz of the body sorry for wasting you guys timeQUOTE (Awesome @ Feb 14 2009, 09:12 PM) <{POST_SNAPBACK}>Wait are you saying it is like This shape for the body, only less exaggerated. I wouldn't worry about it if its only a mm though
\ /
\ /
\ /
EDIT
It isn't keep the spaces when I post >_<, just try and quote this post to see what I tried to draw with slashes poorly XD -
Date: Sat, Feb 14 2009 22:04:53
If its only a bit don't worry about it, its not going to effect anything
-
Date: Sun, Feb 15 2009 06:08:34
He is saying that the rsvp body tapers down like a comssa body, which it infact does VERY VERY slightly. The inside of the rsvp tapers down a little more so thats why one end of the insert is thinner than the other side. (diameter wise)
-
Date: Sun, Feb 15 2009 11:13:21
ok thanks thats what i wanted to hear
QUOTE (pholord @ Feb 15 2009, 07:08 AM) <{POST_SNAPBACK}>He is saying that the rsvp body tapers down like a comssa body, which it infact does VERY VERY slightly. The inside of the rsvp tapers down a little more so thats why one end of the insert is thinner than the other side. (diameter wise)
-
Date: Sun, Feb 15 2009 13:53:10
Ah.. Lol i thought it was bent like it's broken or something. But yeah it's slightly tapered, especially on the inside.
-
Date: Thu, May 7 2009 09:20:38
i agree
how did i know i was looking for a clear barrel for a pen then i found out that this cap wont fit as well as the other cap -
Date: Fri, May 15 2009 10:16:36
I have had an RSVP pen that was bent. It also drove me insane. I took
it straight from the pack, it was bent...looks like i'm not the only one...