UPSB v3
Pen Modifications / Signo NX MMTX
help with tut pls
-
Date: Mon, Mar 16 2009 07:58:29
Hey,
I saw that pen that Joey spun in TWPS 6th.
I now know it´s called Signo NX MMTX and I found that on youtube:
Body: http://www.youtube.com/watch?v=tYNTc3vk ... re=related
Cap: http://www.youtube.com/watch?v=uW5F6HBoAKc
But my questions are:
-Is there a written tutorial or sth.?
-Does someone have a material list and how long to cut the Signo-Bodys and the G2 ?
-Does someone have the pen and can give some feedback? -
Date: Mon, Mar 16 2009 09:31:26
From what i see, the cap part should be something like:
Signo tip < Hgg grip in a Hyperjell/G3 cap.
The body should be like:
G3 < G2 piece < Hgg grip on a front piece of a signo cut of < Signo tip.
Hope this helps.
And im not 100% sure though because he did not state the pens he used. -
Date: Mon, Mar 16 2009 09:47:21
Is it rly a G3-Body?I thought that,too,but
I´ve never seen a yellow G3,because in the vid,the backplug is still in there. -
Date: Mon, Mar 16 2009 09:56:12
Perharps he used some noname pens that are only sold in taiwan? idk man..
-
Date: Mon, Mar 16 2009 12:53:22
No its Signox2, g2x1.
Signo->g2bodypart->signo front piece. -
Date: Mon, Mar 16 2009 13:48:34
hi
Let me answer:
signo dx x2
g2 x1
latte x1
but what is latte?
the pen at the buttom of the page
http://www.pilot-pen.com.tw/ProductList.aspx?CategoryID=2
(sorry it is chinese page)
detail of the pen:
length:19.8cm
weight:heavy(for me?)
difficulty:hard(for me and spinners in TWPS)for you guys it is easy I know
what should you prepare:
http://img172.imageshack.us/img172/2049/material2go4.jpg
1.the barrel in blue box should be thinner
2.cut G2 barrel in 4 cm
3.two insert same pattern,the barrel part is 7.5 cm,and the G2 part is- 4.05cm4.an empty signo ink tube without metal part
the rest part you could find out in videos
good luck when you modify!!
I am surprised that you know my pen! -
Date: Mon, Mar 16 2009 16:15:49
Hey,
thanks
I saw your pen and thought it was a MX but then I recognized,it was different.
I read in the comments on YT,it was a NX MMTX and I wanted to mod it^^
Hm...
I think that Latte-Cap can be subbed with a HyperJell? -
Date: Mon, Mar 16 2009 20:10:56QUOTE (E-Raising @ Mar 17 2009, 03:15 AM) <{POST_SNAPBACK}>Hey,
thanks
I saw your pen and thought it was a MX but then I recognized,it was different.
I read in the comments on YT,it was a NX MMTX and I wanted to mod it^^
Hm...
I think that Latte-Cap can be subbed with a HyperJell?
why dont we get joey to make a tutorial and put it in tutorials pending approval? Cause i wanna make one of these as well. -
Date: Mon, Mar 16 2009 20:12:52
i made one. Its pretty heavy even though its only 2 signo tips. I subbed the cap with hyperjell too and its still balanced.
Theres an odd ridge between the signo body and g2 piece though.. -
Date: Tue, Mar 17 2009 07:30:16
I made it,too.
I subbed the cap with hyperjell and hyperjell-grip inside the cap ---> unbalanced
so : no tip inside the cap ---> balanced
Damn...I hate putting an inlay under G2-barrels .___. -
Date: Tue, Mar 17 2009 14:41:29
the insert would be put in the G2 easier when the insert are longer than 4cm (but not too long)
watch the video and you will find out why it is better -
Date: Tue, Mar 17 2009 16:45:29
thats a kinda weird looking pen does it realy spin nice?
-
Date: Fri, Mar 27 2009 00:09:31
looks cool.
Signo gel grip?
or signo original... nvm.
Edit- btw, sig tip in the cap? no one asked -
Date: Fri, Mar 27 2009 08:04:42
never heard of this mod.
-
Date: Sat, Mar 28 2009 09:27:18QUOTElooks cool.
Signo gel grip?
or signo original... nvm.
Edit- btw, sig tip in the cap? no one asked
It´s Signo DX.
And there´s a signo-tip inside the cap in the original one,I left it out cause the hyperjell-cap and -grip are heavy
ehough to balance it.
It spins nice,yes,even if it´s a bit too long for me^^ -
Date: Sat, Mar 28 2009 10:17:38QUOTE (E-Raising @ Mar 17 2009, 02:30 AM) <{POST_SNAPBACK}>I made it,too.
I subbed the cap with hyperjell and hyperjell-grip inside the cap ---> unbalanced
so : no tip inside the cap ---> balanced
Damn...I hate putting an inlay under G2-barrels .___.
the grip thingy looks weird . -
Date: Sun, Mar 29 2009 17:02:52
i use to have a singo tipped nx mmt and it spins preety well.. but some how i lost it haha
-
Date: Fri, May 8 2009 04:05:08
Someone should make it, make a tut, then put it in "Tutorial's Pending Approval" so more people know how to make this mod.
If no one makes a tut, I wouldn't making a tut when I acquire the parts and of course I would give Joey credit.
Also, does anyone know what the front grip is and what the back grip is? I heard the front was a signo DX maybe, but wouldn't it bulge like E-Raisings version, unless you file the front?
Thanks. -
Date: Fri, May 8 2009 04:23:11
The way this mod is made in the front is sanded down signo body -> G2 Barrel -> Cut/sanded down signo body. There is a bulge because the lip that the tip screws onto was not sanded down. The front grip is signo DX
-
Date: Fri, May 8 2009 18:05:34QUOTE (Asterisk* @ May 8 2009, 12:05 AM) <{POST_SNAPBACK}>Someone should make it, make a tut, then put it in "Tutorial's Pending Approval" so more people know how to make this mod.
If no one makes a tut, I wouldn't making a tut when I acquire the parts and of course I would give Joey credit.
Also, does anyone know what the front grip is and what the back grip is? I heard the front was a signo DX maybe, but wouldn't it bulge like E-Raisings version, unless you file the front?
Thanks.
I might make another Joey mod, so i'll just do that when I make it... -
Date: Fri, Jun 5 2009 01:23:13
I just got the parts for another Joey Mod, and I made a step by step tutorial today for you guys. You can find that tutorial here: http://www.upsb.info/forum/index.php?showtopic=21035 . This thread is now useless...so /closed.