UPSB v3
Tutorials Pending Approval / Seven's Water Color Pen mod
Tutorial :)
-
Date: Sun, Mar 29 2009 16:10:52
hi today im gona do a tut on seven water color pen mod...
this tutorial was taught by one of my jeb frens.. which he gotten the tut in sevens blog..
i made a vid tut too Below
Length:19.4 cm
COP=COG
Weight: near a kt weight ?
pens needed
1 pentel water color pen body
2 kt/m&m/ct caps
3 Alpha gel tips like this Click to see alpha gel pencil
4 sections of g2 ..
5 old sarasa not sarasa clip! (grip can be removed from pen)
1st..
remove the round thingy on top on the the kt/m&m/ct cap by using a hammer and a screw driver. or wadever way u can..
2nd
put agel tip(must remove rubber thingy on the agel tip) into kt cap (inversed)
3rd
cut sarasa grip into half and put it over the kt cap.. holding the a gel tip leave space for 2 section of g2 or supergrip on top ..
4th
put 2 sections of g2 grip inside the sarasa grip..
5th
do the same thing again for the second cap over again .and u will have 2 completed caps
6th
double cap the pentel water color pen with the 2 caps prepared
7th
tape can be added on the cap
8th
spin the seven water color mod...
Video Tutorial
ok my spinning was choppy >< -
Date: Sun, Mar 29 2009 16:33:07
Pictures?
-
Date: Sun, Mar 29 2009 16:34:28
A KT is like 16 grams-17.5
-
Date: Sun, Mar 29 2009 16:37:37
i did tried adding pictures but it was too blur so i used a video instead but its still blur LOL T_T i guess i'll upload some tomorrow ..i have bad lighting in my room ><
-
Date: Sun, Mar 29 2009 16:39:20
Not a terrible tutorial...
you definately need pictures, and need to have more detail in you steps..
As well, do you mean G2 grip or G3 grip inside the tips?? the materials list and process are conflicting.
You need to have a more accurate weighting.
Plus: Its WAYYY too big for your teeny hands
-
Date: Sun, Mar 29 2009 16:42:40QUOTE (Stevieboy7 @ Mar 29 2009, 11:39 AM) <{POST_SNAPBACK}>Not a terrible tutorial...
you definately need pictures, and need to have more detail in you steps..
As well, do you mean G2 grip or G3 grip inside the tips?? the materials list and process are conflicting.
You need to have a more accurate weighting.
Plus: Its WAYYY too big for your teeny hands
im too near the cam i have small hands -.- lol...
its g2 grip.. it was a typo. pictures will be uploaded tomorrow lol im nt really sure abt the weight but i know its lighter than a kt LOL -
Date: Mon, Mar 30 2009 03:38:00
Are there any subs for the watercolor pen body? Could you use a Namae or M&M body instead? I can get all the parts except for the damn watercolor body. Thanks in advance.
-
Date: Mon, Mar 30 2009 03:40:24QUOTE (Samir @ Mar 29 2009, 11:38 PM) <{POST_SNAPBACK}>Are there any subs for the watercolor pen body? Could you use a Namae or M&M body instead? I can get all the parts except for the damn watercolor body. Thanks in advance.
I'm pretty sure you can just use a M&M body for it, i think that's what stevieboy had used ^^ -
Date: Mon, Mar 30 2009 03:47:24QUOTE (Stevieboy7 @ Mar 29 2009, 09:39 AM) <{POST_SNAPBACK}>Not a terrible tutorial...
you definately need pictures, and need to have more detail in you steps..
As well, do you mean G2 grip or G3 grip inside the tips?? the materials list and process are conflicting.
You need to have a more accurate weighting.
Plus: Its WAYYY too big for your teeny hands
19 cm is a pretty good size. Average. Too small for me though. And pen seems okay, imo it's a pretty boring mod. but I guess it is seven's mod. so people are gonna love it. -
Date: Mon, Mar 30 2009 04:30:59QUOTE (JC @ Mar 29 2009, 10:40 PM) <{POST_SNAPBACK}>I'm pretty sure you can just use a M&M body for it, i think that's what stevieboy had used ^^
i used an extended m&m body..
you would have to do that to get the length... otherwise it would just be hella short. -
Date: Mon, Mar 30 2009 04:31:38QUOTE (Samir @ Mar 29 2009, 08:38 PM) <{POST_SNAPBACK}>Are there any subs for the watercolor pen body? Could you use a Namae or M&M body instead? I can get all the parts except for the damn watercolor body. Thanks in advance.
Super tip body is closest in length, M&M body would probably be a tiny bit closer in feel than the super tip.QUOTE (Charlie @ Mar 29 2009, 08:47 PM) <{POST_SNAPBACK}>19 cm is a pretty good size. Average. Too small for me though. And pen seems okay, imo it's a pretty boring mod. but I guess it is seven's mod. so people are gonna love it.
The spinning space is pretty big, but the cap thingy is small so yeah..Kinda small but it spins pretty well. Probably the only way people can make it "unboring" would be using the different sarasa grip colors and mixing them up in patterns or w/e + varied caps etc...
-
Date: Mon, Mar 30 2009 05:17:48
i dont think this is completely right but, good =]
-
Date: Mon, Mar 30 2009 05:20:07
I'm just confuzzled about the g2 grip...TEK didn't mention it in his picture section thingy and a friend of mine from JEB also skipped out on that.. but w/e
-
Date: Mon, Mar 30 2009 06:06:56
well i remember reading from sevens blog there g2 grip or supergrip grip can be use...
as for supertip spinning area is around 9.3 for pentel water color pen its ard 9.8 -
Date: Tue, Mar 31 2009 00:18:29QUOTE (Stevieboy7 @ Mar 29 2009, 11:30 PM) <{POST_SNAPBACK}>i used an extended m&m body..
you would have to do that to get the length... otherwise it would just be hella short.
Okay, noob question. What's an extended M&M body? How much longer is it than a normal M&M body? Thanks. -
Date: Tue, Mar 31 2009 00:35:42QUOTE (Samir @ Mar 30 2009, 07:18 PM) <{POST_SNAPBACK}>Okay, noob question. What's an extended M&M body? How much longer is it than a normal M&M body? Thanks.
if you wrap some tape around the backplug and the tip part of a ct, m&m, or kt barrel, you can 'extend' the body (with caps on) to be 10.5 cm (2.5 cm longer)
good luck
-
Date: Tue, Mar 31 2009 00:51:50QUOTE (Jamie Enns @ Mar 30 2009, 08:35 PM) <{POST_SNAPBACK}>if you wrap some tape around the backplug and the tip part of a ct, m&m, or kt barrel, you can 'extend' the body (with caps on) to be 10.5 cm (2.5 cm longer)
good luck
Cool, thanks. I'm assuming that the caps aren't more prone to come off because of this? -
Date: Tue, Mar 31 2009 23:01:48QUOTE (Samir @ Mar 30 2009, 08:51 PM) <{POST_SNAPBACK}>Cool, thanks. I'm assuming that the caps aren't more prone to come off because of this?
Im guessing if you get a good amount of tape and a good amount of the cap being on the body, then you should have no problem -
Date: Tue, Mar 31 2009 23:32:12
the pens here in america called tul have tips that fit in the caps, like an alpha gel *winks*
-
Date: Wed, Apr 1 2009 04:12:10
lol but the weight will be different i guess... haha..s
-
Date: Mon, Apr 6 2009 03:29:41
photos up
-
Date: Mon, Apr 6 2009 04:11:22
Where does the G2 grip go? Between the Alpha Gel tip and Sarasa grip? Or inside the Alpha Gel tip? Can you add a picture showing where it goes/how to fit it in?
And can someone post a picture of one of these where the watercolor body is subbed with an extended M&M body? I'd like to see how to tape up the M&M body to get the right length.
Thanks. -
Date: Mon, Apr 6 2009 04:21:47
You leave a part of the sarasa hanging off the end of the cap, that space that the hanging section creates : where you shove the g2 grip in, above the a-gel tip and inside the walls of the sarasa grip
-
Date: Thu, Apr 9 2009 10:21:24
thanks!!! finally someone post the tut!!!
-
Date: Fri, Apr 10 2009 00:33:04QUOTE (Samir @ Mar 29 2009, 08:38 PM) <{POST_SNAPBACK}>Are there any subs for the watercolor pen body? Could you use a Namae or M&M body instead? I can get all the parts except for the damn watercolor body. Thanks in advance.
The point of the mod is using the watercolor body. It's rare, making the pen mod very valuable.
You can use a sub to make the mod, it just wouldn't be worth much.