UPSB v3

Tutorials Pending Approval / NamaeSign Mod

Namae + BallSign mod

  1. Corvin
    Date: Thu, Apr 2 2009 04:53:28

    First of all i dont know if anyone made this. Cuz i can't find it anywhr in upsb.
    I personally feel that it is a good mod cuz it spins well, and have
    considerable weight.


    Spoiler:

    Stats
    -------------------------------------------------
    Name : NamaeSign mod
    COG:COP

    Spoiler:

    Length:20.2cm
    Weight:NamaeStyle:Double Sided
    Writing-Mechanism:
    Ink-Type:Ballpoint
    Estimated-Cost:SGD$12
    -------------------------------------------------
    Materials List:
    1XBallsign Pen
    2XNamae Caps
    2XSilicone gels
    2XPilot G1 tips
    Some teflon tape


    -------------------------------------------------

    Spoiler:

    Ok let's get started.
    First of all, here are the items that you will need. It's stated above anyway.


    If you wanna put inserts in the mod, start by taking of the front of the ballsign
    with a pliers or something u feel comfortable with. Put the insert in and put the front back in.

    So than, start by putting the tips on the namae caps, than putting the silicones over the cap like this:


    The grip should cover the cap nicely to a line on the cap.

    After which, wrap some teflon tape on the pen to ensure that the cap stays on the pen.
    NOTE; If you want the mod to be writeable, don't put too much tape on the front part like i did.


    Lastly, put the caps on both sides of the ballsign.


    DONE! biggrin.gif
    Comments plz! Thanks. laugh.gif

    -------------------------------------------------

  2. Samir
    Date: Thu, Apr 2 2009 05:15:35

    You should probably add a BallSign to the materials list.

  3. Corvin
    Date: Thu, Apr 2 2009 05:25:24

    Edited. haha. Thanks Samir

  4. Shrouded Figure
    Date: Thu, Apr 2 2009 11:43:22

    quite creative, but I am not used to ballsign body, when I spin a ballsign, the body felt weird to me.

  5. BenToh
    Date: Thu, Apr 2 2009 14:08:06

    namae's silicone balls LOL *hint hint* biggrin.gif

  6. Chobi
    Date: Thu, Apr 2 2009 14:32:27

    If only i had Namaes...nice mod btw, i LOVE the Ballsign body, so if i get Namaes, ill make this. smile.gif

  7. Swifty
    Date: Thu, Apr 2 2009 19:28:12

    The G1 tips are probably a setback for a lot of people :/


    otherwise it looks rather nice, and new.

  8. JoeNugget
    Date: Thu, Apr 2 2009 21:23:54

    Im guessing you can sub the G1 tips with signos, cause signo's fit perfectly in namae caps. Idk the weight differenece of the tips though.

  9. Chobi
    Date: Fri, Apr 3 2009 08:40:19

    Wait, you don't take out the inktube of the Ballsign? huh.gif

  10. BlacknWhite
    Date: Fri, Apr 3 2009 14:50:18

    QUOTE (Chobi @ Apr 3 2009, 04:40 PM) <{POST_SNAPBACK}>
    Wait, you don't take out the inktube of the Ballsign? huh.gif

    Maybe because he wants it to be writable?

    EDIT: you should use the silicone grips tips. they are fkin good to spin with.

  11. Might
    Date: Fri, Apr 3 2009 16:32:10

    QUOTE (JoeNugget @ Apr 2 2009, 11:23 PM) <{POST_SNAPBACK}>
    Im guessing you can sub the G1 tips with signos, cause signo's fit perfectly in namae caps. Idk the weight differenece of the tips though.



    No, you can sub G1 with Hi-Tec C Tips, they have the same weight and form. Signos are about 0,6-0,7g heavier.

  12. Corvin
    Date: Fri, Apr 17 2009 14:12:15

    I dun haf signo DX tips lol, so i use the G1.
    Maybe signo DX tips works fine too.
    For the inserting of tips u haf to becareful cuz if u apply to much pressure the inktube will be spoilt.