UPSB v3
Tutorials Pending Approval / Buster Cyl elite
-
Date: Fri, Apr 3 2009 07:38:41
it has less weight than the usual buster cyl. perfect for infinities.
so here's the tut
specs:
lenght: 19.3cm
weight: 12ve's mod < buster elite < buster cyl
style: double sided
writing mech: none
materials:
1x crayola supertip
2x zebra airfits
1. take off the tips and grips of airfit and take the cyl cap off..
2. put the tip inside the grip.. make sure make it look like this...
3. double gripped the body..(optional) put a insert inside the grip
4. spin it -
Date: Fri, Apr 3 2009 07:52:23
well, basically a bustercyl with longer grips...
-
Date: Fri, Apr 3 2009 07:53:02
I don't think the ends are stable enough, =/. I personally think a regular CYL is better than this because the ends might fall off anytime and keep on wiggling while you spin it.
-
Date: Fri, Apr 3 2009 08:04:55QUOTE (Clyde @ Apr 3 2009, 05:53 PM) <{POST_SNAPBACK}>I don't think the ends are stable enough, =/. I personally think a regular CYL is better than this because the ends might fall off anytime and keep on wiggling while you spin it.
no they're stable as seven old pen mod. because the grips are too tight too hold the tip enough. -
Date: Fri, Apr 3 2009 08:09:54QUOTE (PenMaster @ Apr 3 2009, 04:04 PM) <{POST_SNAPBACK}>no they're stable as seven old pen mod. because the grips are too tight too hold the tip enough.
how are you sure that it's as stable as SEVEN's watercolor pen mod? You don't even have one.
-
Date: Fri, Apr 3 2009 21:27:02
this isn't a new mod... you just reversed the tips on a buster
. And... wouldn't it be heavier than buster cause your using 2 whole grips instead of 1 cut in half? -
Date: Fri, Apr 3 2009 21:32:21
yeah, not a new mod at all, and i dont get how its lighter than a buster, it uses the exact same stuff. and the airfit grips weigh next to nothing, so yeah, not really a weight factor at all.
-
Date: Fri, Apr 3 2009 21:34:49
It's slightly different from a Buster CYL because it doesn't use Comssa caps and the tips are reversed + longer grips.
-
Date: Fri, Apr 3 2009 22:35:03
Alright, this needs a lot of improvement.
1. Most people like their buster by how it is, they don't need a variant that's probably less stable.
2. Keep it a personal variant. Or ask around and see if anyone wants a tut.
3. Just because you like it doesn't mean everyone else will. There's the huge stick controversy, and many people won't spin it anyways.
This post is gonna get quoted... -
Date: Fri, Apr 3 2009 22:50:00QUOTE (hoiboy @ Apr 3 2009, 06:35 PM) <{POST_SNAPBACK}>Alright, this needs a lot of improvement.
1. Most people like their buster by how it is, they don't need a variant that's probably less stable.
2. Keep it a personal variant. Or ask around and see if anyone wants a tut.
3. Just because you like it doesn't mean everyone else will. There's the huge stick controversy, and many people won't spin it anyways.
This post is gonna get quoted...
Quote for truth. -
Date: Fri, Apr 3 2009 23:15:54
I would make this 100%, if I could bother to get airfits. I like how you eliminated the need for caps, and made use of the second airfit grip, which is usually hanging around after making a normal Buster CYL. The two main problems I see with this modification is it's durability and, for lack of a better word, stick-ness. The first problem could be solved with some glue possibly. As for it's "stick-ness", I would say you need to focus this mod on doing something besides acting as a practice baton for pen spinning. Find a creative way to make it writable, or some other unique function.
As for everyone else's comments, I think you understand that people can get a little pissed when someone posts a mod that people haven't been going crazy over
(I thought that was the point of having a tutorial approval system (>_>) whatever). So maybe post in SOYP first, and people will be able to figure it out from there. -
Date: Fri, Apr 3 2009 23:43:55
this is very good for silent spinning
u wouldnt need to worry about dropping this pen because no matter which way u drop it, the grips would cushion the impact of the fall (since the grips have a bigger circumference than the pen).
u could drop it parallel to the ground, angled (no tips to make clacky noise).
the only problem about the pen dropping is that the body may hit the edge of something and make a clack.
but still, this pen has more chances of silent dropping than usual buster cyl. -
Date: Sat, Apr 4 2009 00:19:54QUOTE (NoobishPenspinner @ Apr 3 2009, 04:43 PM) <{POST_SNAPBACK}>this is very good for silent spinning
u wouldnt need to worry about dropping this pen because no matter which way u drop it, the grips would cushion the impact of the fall (since the grips have a bigger circumference than the pen).
u could drop it parallel to the ground, angled (no tips to make clacky noise).
the only problem about the pen dropping is that the body may hit the edge of something and make a clack.
but still, this pen has more chances of silent dropping than usual buster cyl.
i c wat u did thar...
but i think when your spinning it fast, the tips might be able to launch out and may loose your tip or if it might hit someone. -
Date: Sat, Apr 4 2009 02:51:48QUOTE (kenny158 @ Apr 4 2009, 10:19 AM) <{POST_SNAPBACK}>i c wat u did thar...
but i think when your spinning it fast, the tips might be able to launch out and may loose your tip or if it might hit someone.
no it wont come off, because the grips are too tight., -
Date: Sat, Apr 4 2009 03:24:26
look like waterfall mod variation to buster cyl
-
Date: Sat, Apr 4 2009 03:43:02QUOTE (NoobishPenspinner @ Apr 4 2009, 10:43 AM) <{POST_SNAPBACK}>this is very good for silent spinning
u wouldnt need to worry about dropping this pen because no matter which way u drop it, the grips would cushion the impact of the fall (since the grips have a bigger circumference than the pen).
u could drop it parallel to the ground, angled (no tips to make clacky noise).
the only problem about the pen dropping is that the body may hit the edge of something and make a clack.
but still, this pen has more chances of silent dropping than usual buster cyl.
SILENT PEN!!~ YES!!~
*goes off to make the buster cyl elite* -
Date: Sat, Apr 4 2009 05:02:22QUOTE (G.lanz @ Apr 4 2009, 09:15 AM) <{POST_SNAPBACK}>I would make this 100%, if I could bother to get airfits. I like how you eliminated the need for caps, and made use of the second airfit grip, which is usually hanging around after making a normal Buster CYL. The two main problems I see with this modification is it's durability and, for lack of a better word, stick-ness. The first problem could be solved with some glue possibly. As for it's "stick-ness", I would say you need to focus this mod on doing something besides acting as a practice baton for pen spinning. Find a creative way to make it writable, or some other unique function.
As for everyone else's comments, I think you understand that people can get a little pissed when someone posts a mod that people haven't been going crazy over (I thought that was the point of having a tutorial approval system (>_>) whatever). So maybe post in SOYP first, and people will be able to figure it out from there.
i'll go post it in the soyp, but anyway thanks for your constructive criticism,.,
and this mod is also durable, the grips are not wiggling when you spin, cuz airfit grips are hard and not capable to wiggle. (unless you bent it yourself).,i think i have to add a pen test for buster cyl elite.,gonna film it if i have more time. -
Date: Sat, Apr 4 2009 05:12:46QUOTE (PenMaster @ Apr 4 2009, 10:51 AM) <{POST_SNAPBACK}>no it wont come off, because the grips are too tight.,
Really? Lend this pen to me and I'll spin it faster than Dongza or as fast as kentei. If the ends fall off, what would you do?
-
Date: Sat, Apr 4 2009 05:54:45QUOTE (Clyde @ Apr 4 2009, 02:12 PM) <{POST_SNAPBACK}>Really? Lend this pen to me and I'll spin it faster than Dongza or as fast as kentei. If the ends fall off, what would you do?
why won't you try making this mod yourself? woah.,your so cool you can spin faster than dongza or as fast as kentei?.,i'm starting to love your style then,. -
Date: Sat, Apr 4 2009 06:51:38
where can i get airfits. im from the philippines
-
Date: Sat, Apr 4 2009 07:19:12
you can get those pens in our country., trade with someone else.
-
Date: Thu, Apr 9 2009 03:13:58
how does it have less weight than a normal buster
it uses two FULL grips instead of two HALVES -
Date: Thu, Apr 9 2009 03:30:42QUOTE (PenMaster @ Apr 4 2009, 03:19 PM) <{POST_SNAPBACK}>you can get those pens in our country., trade with someone else.
??? you mean can't? because you said "trade with someone else." -
Date: Fri, Apr 10 2009 05:17:57QUOTE (Ilvdrftng @ Apr 9 2009, 11:13 AM) <{POST_SNAPBACK}>how does it have less weight than a normal buster
it uses two FULL grips instead of two HALVES
There are no Comssa caps, and the Airfit grips are practically weightless.