UPSB v3
Tutorials Pending Approval / True Geller mod
by BloorA
-
Date: Fri, Apr 10 2009 02:47:43
Hello UPSB!
This was intentionally meant to be a present for a friend, so i experimented and it looked really good. It looks like a clear-bodied Dr.KT if you added sailor grips to it =) It has very nice momentum to it too, and the best of all, its cheap and simple =)
Name: True Geller mod
Weight: depends what tips you use. =)
Length: 20cm (19.9 cm if precisely)
Style: Double-sided
Insert? Yes!
Parts needed:
2x Faber Castell True Gel (the 0.7 types haver clear bodies, whereas the 0.5s have tinted bodies)
2x Grips of choice (I used g2 grips again)
2x Tips of choice (I used signo tips)
Step One:
completely strip down one true gel. Keep/Discard the unwanted stuff
Step Two:
Cut the clips off from both caps. It is relatively easy to cut it off. Sand/File it down if you want to.
Step Three:
Tape the tips onto the caps, and place your grips onto the caps.
Step Four:
Rub off the barrel design. It should be a nice clear body. (Place an insert now)
Step Five:
Double cap it and spin!
Finished product:
Enjoy! -
Date: Fri, Apr 10 2009 02:51:21
Very nice
, although next time, 1 request is not enough to generate a tutorial. I'm sure you would've gotten more, just try to wait for more.
Hmm... what is its momentum like? -
Date: Fri, Apr 10 2009 02:53:07
Nice.
Looks nice, yet simple to make.
Only problem is that parts are probably not as accessible.
-
Date: Fri, Apr 10 2009 02:54:19
well, there was some requests on the shoutbox also so yeah.
the momentum is.. dunno how to say but i think its very nice =) -
Date: Fri, Apr 10 2009 03:02:05
nice easy to make mod, you forgot to add the dimensions for the insert