UPSB v3

Tutorials Pending Approval / [Tutorial]RSVP VMMX

Heavier Version of the RSVP MMX

  1. Pen-Protime
    Date: Sat, Apr 11 2009 04:06:20

    What it looks like
    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0345.jpg

    Facts:
    RSVP VMMX
    Length: 20.2
    Weight: Very Heavy (like Ayatori mod)
    COG: Near the center of the mod
    Cost: Should be Under $10
    Writeable: Yes
    Ink-Type:Ball-roller

    Note:Meteor-V tip is more heavier than Dr.Grip tip

    Pens Needed:
    Pentel RSVP
    http://images.google.ca/imgres?imgurl=http...sa%3DN%26um%3D1

    Pentel Meteor-V
    http://www.buyonlinenow.ca/viewproduct.asp?sku=PENBK83FC

    Pilot G2
    http://www.pilotpen.us/products/gel/

    GT Roundedge or STAEDTLER Mars micro
    http://www.staedtler.ca/Mars_micro_ca.Staedtler
    http://www.grandandtoy.com/sites/CORP/Prod...oductCode=99656

    Tools needed:
    A saw
    tapes
    sandpaper
    a knife

    How to make:
    Step one: Use the saw to cut G2 Barrel up to 4.2 cm, then sand it perfectly with sandpaper

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0355.jpg

    Step two: Remove the grip from the RSVP, and poke a hole on the RSVP back cap. Then, put the ink tube reverse, just like the way you make Momentum MX

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0354.jpg

    Step three: Sand the front Part of the RSVP "the ring" until u can fit in the G2 barrel that you cut before

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0356.jpg

    Step Four: Remove the tip from the Roundedge, and tape the back of the tip “the screw part”

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0357.jpg

    Step Five: Cut the RSVP grip with knife up to 1.5 cm

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0358.jpg

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0359.jpg

    Step Six: Put in the Roundedge tip inside the RSVP cap, and force it in a little until it stays in place

    Step Seven: Put the 1.5 cm RSVP grip inside the RSVP cap with the tip, force it in a little until it grips on to the tape part of the Roundedge tip

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0353.jpg

    Step Eight: Screw the Meteor-V tip and screw it in to the G2 barrel of the mod, it should fits perfectly.

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0346.jpg

    Step Nine: Print out the insert you like and fit in the RSVP Barrel

    http://s584.photobucket.com/albums/ss290/P...nt=CIMG0348.jpg

    Step Ten: Put the RSVP cap on to the mod

    Finish

  2. Wind
    Date: Sat, Apr 11 2009 05:04:35

    facepalm.gif this is just a MMX variation... you don't need to make a whole tutorial for it..
    post in the "show off your mod" thread before you post a tutorial..

  3. Pen-Protime
    Date: Sat, Apr 11 2009 18:09:39

    lol the tip is different, and its way more heavier than the MMX

  4. pholord
    Date: Sat, Apr 11 2009 18:22:41

    QUOTE (Pen-Protime @ Apr 11 2009, 11:09 AM) <{POST_SNAPBACK}>
    lol the tip is different, and its way more heavier than the MX

    it doesnt matter
    wait to see if people want a tutorial before posting one

  5. JSH
    Date: Sat, Apr 11 2009 18:41:58

    QUOTE (Pen-Protime @ Apr 11 2009, 02:09 PM) <{POST_SNAPBACK}>
    lol the tip is different, and its way more heavier than the MX


    He said MMX variation not MX

  6. Mohammed Sirhan
    Date: Sun, Apr 12 2009 03:39:43

    i have all parts for this mod!
    i will try to make one for charges

  7. Kool spinz
    Date: Sun, Apr 12 2009 04:06:10

    bk83 tip is so heavy , thats why the mod is heavy
    just a variation

  8. Mohammed Sirhan
    Date: Sun, Apr 12 2009 04:29:56

    wait is it variation of mmx or mmt?

  9. Glamouraz
    Date: Sun, Apr 12 2009 05:11:47

    ^

    They're the same thing.

  10. Pen-Protime
    Date: Sun, Apr 12 2009 20:46:37

    lol its sorta the same thing, but its just a heavier version

  11. Sankaku
    Date: Thu, Apr 16 2009 04:40:36

    MMX and MMT are the same. This pen isnt a new mod, just a variation.

  12. Mohammed Sirhan
    Date: Sat, Apr 25 2009 20:57:40

    instead of ur tip can i use a hgg tip?

  13. o.0dsrp
    Date: Sat, Apr 25 2009 22:00:40

    QUOTE (Mohammed Sirhan @ Apr 25 2009, 03:57 PM) <{POST_SNAPBACK}>
    instead of ur tip can i use a hgg tip?


    http://www.upsb.info/wiki/index.php/RSVP_NX_MMT
    facepalm.gif

  14. Pen-Protime
    Date: Thu, May 7 2009 21:34:13

    sure but it will turn out unbalance

  15. Wind
    Date: Fri, May 8 2009 00:15:35

    QUOTE (o.0dsrp @ Apr 25 2009, 06:00 PM) <{POST_SNAPBACK}>
    http://www.upsb.info/wiki/index.php/RSVP_NX_MMT
    facepalm.gif

    @pen protime, you just got pwned

  16. Pen-Protime
    Date: Sat, May 9 2009 17:42:24

    U guys r trying to say they r all the same? Well i don't think so... >.<

    Differences: Heavier
    2 metal tips, one on the front one on the back ( if u guys did look closely)
    "Meteor V" tip is perfectly screw on the barrel ( no tapes, glue, or force it in), which make this mod unique

    Similarities: Traditional G2 barrel ( MMX and NX MMT)
    Traditional (MX, MMX, NX MMT) ...etc inktube set up
    You can write with it

    Note:It is true someone said that VMMX is a variation between MMX and NX MMT, and i agree on that, but i still have to say, they are all different -.-

  17. JC
    Date: Sat, May 9 2009 17:51:11

    QUOTE (Pen-Protime @ May 9 2009, 01:42 PM) <{POST_SNAPBACK}>
    U guys r trying to say they r all the same? Well i don't think so... >.<

    No, nobody's saying that your mod is the same as the NX MMT and the MMX, your mod is just those two mods with a few changes. And a few changes doesn't require a tutorial.

  18. Pen-Protime
    Date: Sat, May 9 2009 17:53:35

    lol i just wanna do a tutorial

  19. JC
    Date: Sat, May 9 2009 17:57:21

    QUOTE (Pen-Protime @ May 9 2009, 01:53 PM) <{POST_SNAPBACK}>
    lol i just wanna do a tutorial

    Why? A tutorial should only be something that would help others make what you've made, or do what you've done. But that is of course, if people want to make it. If nobody wants to make it, then the tutorial's pointless and only takes up forum space. And not only that, by releasing bad tutorials, you're giving yourself a bad reputation on the board.

    So i don't get why you would want to make a tutorial like this; you're taking up forum space and giving yourself a bad name dunno.gif