UPSB v3

Tutorials Pending Approval / Mrs.SB

By Shoeman6

  1. shoeman6
    Date: Sun, Apr 12 2009 23:43:23

    Stats

    -------------------------------------------------
    Name Mrs.SB Momentum dR.grip Signo Supertip Bic
    COG:COP
    Length:8 inches (about 20 cm)
    Weight:rsvpmxStyle:Doublesided
    Writing-Mechanism:Doublesided
    Ink-Type:Bicstic
    Estimated-Cost:$4.00
    -------------------------------------------------
    Materials List:
    1 Dr.gripgrip
    2 Bic stics
    2 Super tip caps
    2 Signo tips

    Great momentum and an all around great mod imo Great spinning space, easy to find parts and not difficult to make at all. ^_ ^




    -------------------------------------------------


    Spoiler:
    1 Take a bic body and create a Bictory. (Unplug one body and take both of the tips+inktubes out and double plug the body}

    2 Take the two Super Tip Caps and cut 1&1/4inch or 3.2(cm) from the top, throwing away the lip segment

    3 Sand
    4 Take both of the signo tips and put them into the top of each cap ( its should fit perfectly)

    5 Cut the Dr.Grip into 2, 3/4 inches or 1.9 (cm)
    http://i516.photobucket.com/albums/u324/sh...n6/HPIM1868.jpg
    6 But the dr grips on the caps

    7 Just put the caps on the double sided bic body (shud be about 8 inches or 20 cm) and spin!



    -------------------------------------------------

  2. microman_32245
    Date: Sun, Apr 12 2009 23:55:17

    looks cool. but i wouldnt use it because it would probably have a lot of weight on the very ends and i cant spin that kinda momentum

  3. Mike
    Date: Mon, Apr 13 2009 00:35:36

    Pretty nice mod, nice tut.
    Good job smile.gif
    However, you might want to change your measurements to metric tongue.gif
    Other than that, thumb.gif

  4. Kaffatsum
    Date: Mon, Apr 13 2009 00:51:51

    Looks like a great mod, once i get some Dr. Grips ill go make one (what kind you use?)

    Also i agree with Mike, change to centimeters, the rest of the world uses centimeters

  5. shoeman6
    Date: Mon, Apr 13 2009 00:54:49

    Ne dr.grip grips will work, Jap or American or French, (I used Jap) And I fixed the cm stuff.

  6. Mohammed Sirhan
    Date: Wed, Apr 15 2009 04:14:49

    this mod looks good for spin! happy.gif
    What do i do with the super tip bodies

  7. Mike
    Date: Wed, Apr 15 2009 04:33:31

    QUOTE (Mohammed Sirhan @ Apr 14 2009, 09:14 PM) <{POST_SNAPBACK}>
    this mod looks good for spin! happy.gif
    What do i do with the super tip bodies

    You can keep them and make a Buster CYL.
    Do whatever you want with them.

  8. Eric
    Date: Wed, Apr 15 2009 04:36:59

    Good way to use SuperTip caps other then making an STek body ^^ Good job.

  9. shoeman6
    Date: Wed, Apr 29 2009 01:49:43

    Make sure not to push the caps in to far (learned from experience) it'll crack the cap.

  10. Sibis
    Date: Thu, Apr 30 2009 13:44:02

    Nice! thumb.gif Bad thing is that I don't live in USA and don't have BIC sticks or supertips...

    First I though it was Mrs. ShoutBox laugh.gif

  11. Ryukis
    Date: Thu, May 21 2009 01:18:07

    Is there any way that you can take off the writing on the barrel without killing it?

    Sorry if it's a noob question ><

  12. buhryan
    Date: Thu, May 21 2009 01:33:02

    Looks nice but I dont really like bic bodies.

  13. Ice Clear
    Date: Thu, Nov 26 2009 07:33:07

    i dont suppose supertips are sold in the US? can you use some crayola marker caps? thats probably what im gonna try..

  14. PillarsOfValhalla
    Date: Thu, Nov 26 2009 07:36:46

    QUOTE (Ice Clear @ Nov 25 2009, 11:33 PM) <{POST_SNAPBACK}>
    i dont suppose supertips are sold in the US? can you use some crayola marker caps? thats probably what im gonna try..

    Yes, SuperTips are sold in the US.

  15. Ice Clear
    Date: Thu, Nov 26 2009 07:53:18

    QUOTE (PillarsOfValhalla @ Nov 26 2009, 01:36 AM) <{POST_SNAPBACK}>
    Yes, SuperTips are sold in the US.

    haha lol, after i looked at the wiki, i realized what they were... thanks pillars!