UPSB v3
General Discussion / "1 Answer Questions" Thread
-
Date: Sat, Jun 23 2007 20:08:07
For when you only want to ask a simple question that does not already have a thread.
Examples:
Q: When is [insert foreign collab name] going to be released?
A: [insert date of release]
Q: Is [insert pen name] good for spinning?
A: If it works for you, then yes.
----
Original Thread -
Date: Sun, Sep 9 2007 03:52:40QUOTE (nateiskewl @ Sep 8 2007, 08:43 PM) <{POST_SNAPBACK}>QUOTE (Nike T)What model of eraser does the Dr. Grip shaker use in the US, it's running low and I need another.Where is there an eraser?
Its under the fake clicker -
Date: Sun, Sep 9 2007 10:54:21QUOTE (bry01phil)hello it's me.I have been a pen spinner for 1-2 months.
I now have these tricks in my arsenal.(these are tricks i can usually execute not tricks i can execute only a few times before failing again a lot of times)
charge 12, charge 23, double charge
fingerpass(still mastering)
sonic 23-12, sonic rev, inverse sonic, twisted sonic, inverse twisted sonic,sonic 34-23,sonic jump,neosonic
half tap
TA, TA rev, TS 1.5, TS 2, TS 3,TA index push, TA ring finger push, TA pinky push
index around
infinity T1, double infinity , triple infinity , quad infinity, extended infinity, extended double infinity, infinity T2
weiss back around 12, korean back around 12(a.k.a. korean bak)
do i suck, average, or other terms you might want to use?
I've been spinning more than a year and i know half the tricks you do.
You cant really define how "good" a penspinner is like that, I'd say you were on the right track for the amount of time you've been spinning, but you need a video to compare your actual skill. -
Date: Sun, Sep 9 2007 11:04:39QUOTE (bry01phil @ Sep 9 2007, 12:51 PM) <{POST_SNAPBACK}>hello it's me.I have been a pen spinner for 1-2 months.
I now have these tricks in my arsenal.(these are tricks i can usually execute not tricks i can execute only a few times before failing again a lot of times)
charge 12, charge 23, double charge
fingerpass(still mastering)
sonic 23-12, sonic rev, inverse sonic, twisted sonic, inverse twisted sonic,sonic 34-23,sonic jump,neosonic
half tap
TA, TA rev, TS 1.5, TS 2, TS 3,TA index push, TA ring finger push, TA pinky push
index around
infinity T1, double infinity , triple infinity , quad infinity, extended infinity, extended double infinity, infinity T2
weiss back around 12, korean back around 12(a.k.a. korean bak)
do i suck, average, or other terms you might want to use?
no you don't suck at all, everyone has its own progression rate.
don't see PS like a race to be the best, progress at your own rate and focus on tricks that appeals you at first, then once you get the tricks down focus on linking them, the inspiration is everywhere. there is no " i spin for 2 month i can only do that so i suck" : it depends on plenty of things, just enjoy ps, enjoy what you like to do, thats what its all about -
Date: Sun, Sep 9 2007 18:30:45QUOTE (WhiteFang)Wats the difference between a combo and hybrid??
n00b question..huh??
A combo consists of 2 or more complete tricks strung together. A hybrid combo contains one or more incomplete tricks and may also include a complete trick. It does not matter where the trick(s) is cut off and combined.
A hybrid combo can have multiple pushes.
Some examples:
2 tricks, 1 push, first has no catch, second has no push...
Shadow 23-23 [p][s 0.5] ~ Passaround 23-12 [s 0.5][c]
2 tricks, 2 pushes, first trick has no catch...
Shadow 23-12 [p][s 0.5] ~ Fingerless Middlearound 23-23
As long as there is an incomplete trick connected to something else, the two will make a hybrid combo instead of a complete combo. -
Date: Sun, Sep 16 2007 00:10:27
Does anyone know who made this tutorial?
QUOTE (sketching)That's the tutorial by SubParSpinner, he called it a Korean Backaround by mistake. tongue.gif
For anyone with access to it, here's the UPSBv2 thread for the video: Video Tutorials (inside) -
Date: Fri, Sep 21 2007 09:38:31QUOTE (jackolanternsoup @ Sep 21 2007, 05:08 PM) <{POST_SNAPBACK}>i recently learned double TA. which should i learn next (which is easier) triple TA or cont bakaround
different people find different things easier. Why don't you try them out for yourself or learn them both anyway. -
Date: Fri, Sep 21 2007 14:01:13QUOTE (JIRO @ Sep 21 2007, 08:40 AM) <{POST_SNAPBACK}>Question about "Continuous".
the combo name,
Continuous [trick name] ?
or Continuous [trick name]s ?
or are both no problem?
Both are fine. -
Date: Sat, Sep 22 2007 10:07:05QUOTE (K4S)Are "person's" (the clear keityo substitute) the exact the same diameter as keityo or slightly larger?
they're the same -
Date: Tue, Sep 25 2007 13:33:45QUOTE (jackolaternsoup)Is there an English Pen Spinning Community?
Has anyone actually heard of any English pen spinners?
Lol... evidently i'm interested..
And also what're good camera specs to use for pen spinning videos? i get really irritated when i watch these vids with something like 1 fps and really bad quality...QUOTE (Tim @ Sep 25 2007, 08:57 AM) <{POST_SNAPBACK}>Crash is english, Mats lives in England but I think he might be welsh, there were few more but I can't remember them.
Crash, Mats, shuya, Jakemon, Health, ratboy, that Czech guy, and a bunch of others. Most of them have just started pen spinning. I would know because a good number of my YouTube subscribers are from England. -
Date: Thu, Sep 27 2007 15:37:56QUOTE (ellusion @ Sep 27 2007, 11:06 AM) <{POST_SNAPBACK}>which country play pen spinning first?
No one knows for sure.
-
Date: Sun, Sep 30 2007 13:37:18
Thanks UEDan ：D
Hideaki Kondoh is researching about Pen Spinning.
He thinks some Japanese were spinning a pen, when pencils spread in Japan from The Taisho Era (about after 1912).
He announced a news by one of reader of Hideaki's website.
It news says Enpitsu Mawashi(Pencil Spinning) was in vogue in Aichi in 1937(started war of Japan vs China).
Japanese teachers thought that play of finger Enpitsu Mawashi makes students's brain fine.
so, students wasn't scolded thair spinning in a class by teachers.
their ps skills were TA Normal, Half TS, Drummer .
I don't know histories of pen spinning in other countries... -
Date: Fri, Oct 5 2007 00:06:27
hey i was checking out the some of the Bonkura tribute videos and on one of them they had a clip of him doing manipulation with a cell phone. does anyone know what the source video of that clip is? i've tried doing a search on the forums and on youtube, but i keep getting the same results and hitting a wall. any info would be appreciated thanx.
-
Date: Sun, Oct 7 2007 05:51:22QUOTE (Look Into the Sun @ Oct 6 2007, 07:40 PM) <{POST_SNAPBACK}>In PSN 4th. http://www.youtube.com/watch?v=RFCft6_Ngqo When Bonkura starts spinning at 2:02, a new song starts playing. Anyone know the name of the song? And who sings it?
naotyu-VelacielaQUOTE (nathan. @ Oct 6 2007, 09:56 PM) <{POST_SNAPBACK}>Does the GJH make noise when you spin it?
Can you replace the graphite ("pencil lead") if it runs out?
my personal opinion, no, my friend's gjh does not make sound,
bought from pendolsa,
not entirely sure.
i think the lead is 0.5 lead, which is refillable -
Date: Sun, Oct 7 2007 23:39:07QUOTE (kensai @ Oct 7 2007, 12:21 AM) <{POST_SNAPBACK}>Q: When UPSBv3 opened, were all the old-timers from UPSBv2 informed? (I don't see too many of them around...)
I told kam to mass-email UPSBv2 members, not sure if he did it though. -
Date: Mon, Oct 8 2007 05:30:32QUOTE (ellusion67)what are the first collab in pen spinning history??
as far as internationally known, Pendolsa 1st.
but it's possible Pendolsa have collabs before that one that were released locally so the rest of the world didn't know about it. -
Date: Wed, Oct 10 2007 17:05:12QUOTE (K4S)Will there be a christmas gift exchange this year?
the christmas exchange has never been run by an UPSB official. -
Date: Wed, Oct 10 2007 23:04:23QUOTE (bry01phil @ Oct 10 2007, 01:36 PM) <{POST_SNAPBACK}>What's a christmas exchange...is it like trading but in christmas and a lot more stuff?
Everyone who signs up gets randomly assigned another person's name and they have to send a gift to that person. It's not really a trade since the person you give a gift to will be sending his/her gift to another person and so on. -
Date: Wed, Oct 10 2007 23:42:54QUOTE (K4S @ Oct 10 2007, 04:04 PM) <{POST_SNAPBACK}>Everyone who signs up gets randomly assigned another person's name and they have to send a gift to that person. It's not really a trade since the person you give a gift to will be sending his/her gift to another person and so on.
Secret Santa* -
Date: Thu, Oct 11 2007 06:08:41QUOTE (bry01phil @ Oct 11 2007, 01:55 AM) <{POST_SNAPBACK}>oh ok...but when that someone get's the package won't there be a name
?or you dont put in your name(maybe another name)
It's only anonymous until you receive your gift, then you know who sent it to you. -
Date: Sun, Oct 14 2007 21:10:57QUOTE (patrick)does kams MX inlay wrap seamlessly?
thx
If im not mistaken, they do wrap seamlessly. -
Date: Mon, Oct 15 2007 02:54:18QUOTE (Crzyazn)when was the first bakfall/who created the combo?
From this UPSBv2 thread...
nhk_9 June 28, 2003
"Have you ever thought of a "Backaround Fall"... that is 12Back > 23Back (34 catch)"
davidweis July 2, 2003
"I'm thinking a complete "Backaround Fall" would include a third backaround from 34.
The path a backaround takes is longer the further down the hand you start, to go all of the way from a 34 start around the back of the hand is really really hard to get consistent. But it would be worth working on to put together a "Backaround Fall", that would be cool."
nhk_9 July 2, 2003
"I see. Should the 34 Backaround end with a 34 catch?"
davidweis July 2, 2003
"No, if it were a 34 catch it would be considered a neo-bak variant. Any catch other than a index and thumb catch is considered a neo-bak variant. Backarounds have to travel all of the way around the hand to be caught with the index and thumb, thats why I say it is so difficult, in full notation it would be a 34Backaround12. (But the 12 is redundant information since it is a backaround not a neo-backaround.
Wow, did I just make that more complicated"
nhk_9 July 2, 2003
"Actually I think I was talking about travelling over (and around) the index finger... so it would be like a normal Backaround, but only with its origin and end at 34 slot. The trick will be somewhat different than the 23 bak that you demonstrated in one your latest videos which featured the neo-bak to fulltap."
nhk_9 July 2, 2003
"Would a standard 34Backaround end at 34 or 12. I am talking about the "around the index", standard version, not the neo-bak version."
kam July 4, 2003
"I agree with David. All BackArounds should travel all the way around your fingers and come back to the starting position (the writing position, with pen between Thumb and Index). Otherwise, we couldn't use the word "Around", right Wink ?
However, a BackAround Fall, IMO, would be something different than what you guys are thinking. If you do a 12 Bak > 23 Bak > 34 Bak, the pen would be travelling in circles around your hand (starting with small circles and then bigger circles). That's not what a definition of a Fall should be. For it to be considered a Fall, I'd say it should travel down your fingers.
So here's what my view of a BackAround Fall should be: 12 NeoBak > 23 NeoBak > 34 NeoBak. As you know, a NeoBak would put the pen further down the fingers (at the space where the pen passes through) instead of bringing it back to the original position, like in a BackAround. This combo causes the pen to go down the fingers each time a NeoBak is performed. Obviously, this should be posted under the Under Development Forum, as its difficulty is extremely high. Both David and myself were able to do the first part of this Combo (actually, a 12 NeoBak > 23 Bak), but we both agreed that the motion is EXTREMELY awkward, and my guess is that the 34 NeoBak should be 10 times harder."
nhk_9 July 4, 2003
"Shouldn't that be called a "Neo-Bak Fall"?
To make Backarounds with same-sized circles, one could perform Backaround 12 with pen going around index, Backaround 23 with only pen going around middle finger (NOT middle + index) and Backaround 34 with pen going around only ring."
kam July 4, 2003
"True...hehe. Neo-Bak Fall it is then Wink
As for you BackAround Fall, my only question is whether a BakAround around middle finger only would be considered a BackAround (or just a variation of the middle spin)." -
Date: Tue, Oct 16 2007 02:49:23QUOTE (WhiteFang @ Oct 15 2007, 12:13 AM) <{POST_SNAPBACK}>did david weis stop spinning??
he was online a few hours ago.
His member name is "Davidweis.com" -
Date: Tue, Oct 16 2007 22:27:45QUOTE (patrick @ Oct 16 2007, 01:59 PM) <{POST_SNAPBACK}>how is the "good" RSVP blue called? I got blue ones here which are nearly black >_>
which are the RSVP colors which are avaible in different shades? pink, blue, more? (I know that there are also a piss yellow sunburst grips...)
colors for the Rsvp COLORS: Orange,red,black,green,pink,blue,skyblue,purple -
Date: Wed, Oct 17 2007 01:27:41QUOTE (patrick)how is the "good" RSVP blue called? I got blue ones here which are nearly black >_>
which are the RSVP colors which are avaible in different shades? pink, blue, more? (I know that there are also a piss yellow sunburst grips...)
You might be talking about the Ice Blue RSVP Razzle Dazzle. -
Date: Wed, Oct 17 2007 04:49:51QUOTE (TEK)ok i really want a bonkura KT
does anyone have a picture or tut they can show me how to make one?
maybe a list of parts needed? thanks a lot
white KT body (aka miffy&melanie marker)
Colored KT caps (either from colortwin or m&m markers)
sailor gels (pink/skyblue or lightgreen/orange)
dr.grip tips
assembly is exactly the same as a regular dr.KT -
Date: Wed, Oct 17 2007 07:00:38
Oh, I forgot to mention that a mean the grip colors of regular RSVPs.
Here you can see what I mean:
pink vs. pink2 - blue vs. blue2 
/e: aaah, just saw that the cap+ grip maniok uses are from a sunburst - note for myself: blue RSVP = evil - blue Sunburst = good
and another question:
Is there a chance to get the insert of the 3rd USA gathering? I love kams inserts...
/e: aaah, just saw that the cap+ grip maniok uses are from a sunburst - note for myself: blue RSVP = evil - blue Sunburst = good -
Date: Thu, Oct 18 2007 05:26:52
What was the closest pen-spinning battle in history?
-
Date: Thu, Oct 18 2007 05:32:49QUOTE (TEKKEN King @ Oct 17 2007, 02:39 PM) <{POST_SNAPBACK}>do you know any place i can get the pink and sky blue?
and also the miffy?
Japanese traders. -
Date: Thu, Oct 18 2007 05:39:49QUOTE (Aries @ Oct 18 2007, 01:30 AM) <{POST_SNAPBACK}>link for a very detailed HG3R mod, the one that Darkarcher has doesn't explain which parts are from the Pilot g2 or g3
Hey, i went to this awesome site called "www.google.ca" and i searched "HG3R"....
and this was the SECOND link down from the top of the search
-
Date: Thu, Oct 18 2007 16:44:47QUOTE (Aries @ Oct 18 2007, 01:57 PM) <{POST_SNAPBACK}>i had that bookmakred but i didnt under stnad the Pilot's The Better retractable part ;p i now kno its a seperate pen though.
you pull the back part out and then from there try to get the silver thing of with the plastic below it(the mechanism)HG3R wasn't TOO hard for me...except the grooves part on the grip cause I didn't have a sharp knife before -
Date: Fri, Oct 19 2007 17:32:02QUOTE (Rekkuuzan)QUOTE (Sfsr)I know Saizen has spun a G-3 mod before, which was all plain white and black to start with (in RMX + ES). Later he had the same pen but with a pattered insert, but if that was "greenish" or not I don't remember. Some kind of reference, as Rekkuuzan said, please.
Ah, so that's what it is! I've been wondering for the longest time. Learned something without even asking about it. tongue.gif
Sfsr, you wouldn't happen to know what it's made up of would you?
Nope, been dying to find out but I haven't been able to talk to Saizen personally
I made a Lakubo MMX that was simmilar to it though. I guess it's just a backcapped G3 MMX (if that even works...) or something, with white insert with black at the right places in the cap and front, and some black grip perhaps. -
Date: Fri, Oct 19 2007 17:59:21
Hi, i search the tutorial of UP comssa
The picture (if it can be help you) : http://img515.imageshack.us/img515/1527/2007101949248fa1.jpg and http://img81.imageshack.us/img81/1419/2007101949355zz2.jpg
Thanks -
Date: Fri, Oct 19 2007 18:38:55QUOTE (Picool @ Oct 19 2007, 07:59 PM) <{POST_SNAPBACK}>Hi, i search the tutorial of UP comssa
The picture (if it can be help you) : http://img515.imageshack.us/img515/1527/2007101949248fa1.jpg and http://img81.imageshack.us/img81/1419/2007101949355zz2.jpg
Thanks
What does UP stand for? Looks just like a regular ComSsa or Cartoon ComSsa (not sure if the stickers I'm coming to are transparent or have a white/yellowish background...) with one of these stickers attached to it.
EDIT:
@ Rekkuuzan: I watched the video again, the green glow appears to come from the lamp or what it is on the right of the screen. It doesn't necessarily have to be an MMX version of the G-3, could just be a HGG grip with some Anyball sections on it aswell. The only thing I find weird is that the pen looks really big, while a G-3 is quite small. -
Date: Fri, Oct 19 2007 19:28:33QUOTE (Rekkuuzan @ Oct 19 2007, 02:22 PM) <{POST_SNAPBACK}>So then comes the question, can a G-3 cap fit over an RSVP? I don't have one, so I can't test it out.
Yes, the G3 cap will fit on the back of a RSVP. -
Date: Fri, Oct 19 2007 19:37:33
Yeah it can, you just need to tape the back of the RSVP a bit, but you need to do that to the back of the G-3 if you want to have it there. I don't see why it would be a RSVP body instead of G-3, I mean.. A G-3 with a white HGG grip covering the front part, white paper or another white grip in the cap, a white insert, a white piece of grip/paper at the front and back of the grip and cap. Definitly looks like grip at the front in PSN 4th.
EDIT: CPC beat me to the G-3 cap part :P Ayway, let's say hooray for a topic split maybe? -
Date: Sat, Oct 20 2007 03:44:55QUOTE (TEK)not sure where to ask this but is there any good mod tut with the retracable rsvps?
just got some today and was gunna come up with my own. didn't have any ideas tho
There are a lot of potential mods for the rsvp retractables. I recently got some too and i can use them in a few of my own mods. I know where are a couple mods that use rsvp retrac but i cant recall specific names :X -
Date: Sat, Oct 20 2007 07:06:24
I'll give links
http://z15.invisionfree.com/UCPSB/index.php?showtopic=1107
http://hosted.filefront.com/fire89
all I remember... -
Date: Sat, Oct 20 2007 16:48:49QUOTE (Crzyazn @ Oct 19 2007, 11:37 PM) <{POST_SNAPBACK}>*looks at above comments* wow...time for a picture!!
from Psn4th
http://i206.photobucket.com/albums/bb275/C...psn4th_0001.jpg
Now, in my opinion that looks like the following;
- A tip, possibly G-3 though it doesn't have to be that
- HGG grip fitted over the G-3 grip. A piece black grip at both sides of it.
- G-3 barrel
- Insert that is black at the end, or just a piece of black grip/visible backcap before the cap begins
- G-3 cap with cut of clip, a piece of the HGG grip and a tip in. The rest of the HGG grip is on the back of the cap. I don't see the second black stripe at the end of the cap, but it should be there somewhere. A piece of grip probably. -
Date: Sun, Oct 21 2007 02:18:19
Your whole analysis seems correct to me. Though at first I doubted the grip on the cap to be the rest of the HGG, thinking it was Anyball, but after looking at it from this view:
...it makes much more sense. Question though; how did you get the idea of a tip being in the cap? I don't see the slightest indication of there being one, or else my eyes must be really bad. -
Date: Sun, Oct 21 2007 02:41:38
In my picture, you can see a tip
It's like the GJH mod, where the metal g3 tip is shoved into the backcap for momentum. -
Date: Tue, Oct 23 2007 14:48:18
I recreated Saizens mod following what I stated earlier btw. With a HGG tip in the cap and the G-3 tip in it's original place. Felt pretty, but looked pretty cool. I filmed some spinning with it before I de-modded it again, I liked my black/white Lakubo MMX more anyways :P
Also, from what pen is the grip that looks like Sailor Gel but comes in black again? EDIT: <- nvm, found out it was Pilot Hi-tec V3/V4 ^^ -
Date: Tue, Oct 23 2007 23:26:36QUOTE (Crzyazn @ Oct 20 2007, 07:41 PM) <{POST_SNAPBACK}>In my picture, you can see a tip
It's like the GJH mod, where the metal g3 tip is shoved into the backcap for momentum.
Nope, the GJH uses a Signo tip in the back cap. -
Date: Tue, Oct 23 2007 23:50:18QUOTE (Crzyazn @ Oct 23 2007, 04:39 PM) <{POST_SNAPBACK}>@nateiskewl: O...I thought that thing looked kind of familiar. So technically it's an S.G.J.H.
I can see why. Signo tips and G3 tips are practically identical. -
Date: Wed, Oct 24 2007 18:34:11QUOTE (Crzyazn @ Oct 24 2007, 12:23 AM) <{POST_SNAPBACK}>@sfsr: POST THAT VIDEO!!!!!!!!!!!
Here you go
Excuse me for the awefull spinning, just wasn't used to the pen at all
-
Date: Wed, Oct 24 2007 18:45:11QUOTE (Crzyazn @ Oct 20 2007, 10:00 PM) <{POST_SNAPBACK}>Ugh i wish JEB members hung around here more often...I want to know what Saizen's mod is!!
I tried asking someone before, I think imu or RYO, and they said that Saizen's mod is a personal mod and they don't know what it exactly is. I could try asking him when I see him online... I wouldn't count on him telling me though. -
Date: Wed, Oct 24 2007 18:55:31
Meh, we pretty much figured the outside out :P Then, if he has more stuff that isn't visible, that's something else...
-
Date: Wed, Oct 24 2007 22:36:30
LOL sfsr that video looked angry. the mod looks awesome, but the lighting will always be Saizen's little secret. And I think publishing a tutorial on a personal mod is some kind of penspinning sin...
-
Date: Sat, Oct 27 2007 05:10:53QUOTE (Imagm-1337 @ Oct 26 2007, 03:43 PM) <{POST_SNAPBACK}>What is the length of ComSsa caps?
White cap is 4cm long -
Date: Sat, Oct 27 2007 05:41:29
Is there a universal agreement when it comes to judging speed in penspinning battles? I always thought it was how the speed fit the combo, but I'm wondering what other boards thing speed is when judging combos.
-
Date: Sat, Oct 27 2007 13:38:46
In the world tournament, it soon became clear that there is no universal agreement on what speed was, and it was the subject of much debate and confusion. At the moment, to my knowledge, there isn't, but most people will say what you stated, that the speed is appropriate for the combo.
-
Date: Sat, Oct 27 2007 13:43:07
That's what I was thinking, because if Korean style is used by most Koreans (hence the name) then a Korean judge may think of speed as how fast the combo may be, whereas UPSB old timers, where the combos were a lot different and did not focus on speed as much, would probably think differently.
At the next world tournament, there needs to be standard for what speed is judged upon. -
Date: Sat, Oct 27 2007 13:48:14
Speed was replaced with 'style' part-way in the tournament, if memory serves, and I think that is what it will be from now onwards.
-
Date: Sat, Oct 27 2007 14:15:28
In my judging system, speed is replaced by tempo: http://www.upsb.info/wiki/index.php/Judging_system#Tempo
-
Date: Sat, Oct 27 2007 19:28:29QUOTE (aJa)Is there pen you can make with a Papermate profile and a g2?
The Any-X uses those 2...plus an RSVP ink tube and HGG tip.
I'm not sure about the size of the non-retractable Profile cap, but you may be able to do something like the RSVG2, using the Profile cap as a RSVP cap replacement. Otherwise, I can't think of anything using just those 2 pens. -
Date: Sun, Oct 28 2007 08:28:15QUOTE (Merkuury)How does Counter PinkyBak break down?
Is it PinkyBak 34-34 ~ Devil's Shadow 34-34?
No, it would be pinkybak~ rev pinky bak, what you said is quite similar, but the pinkybak shouldn't be caught before executing the last half of the rev pinkybak, it should go on top of your hand, then fall back into 34. -
Date: Sun, Oct 28 2007 22:45:51QUOTE (Crzyazn @ Oct 28 2007, 04:31 PM) <{POST_SNAPBACK}>What size lead does the GJH pencil mod use?
.gif)
0.5 mm I think. -
Date: Tue, Oct 30 2007 10:22:37QUOTE (BananaKetchup @ Oct 30 2007, 01:38 PM) <{POST_SNAPBACK}>what is the length and weight of a 3000*F or F300 mod?Length: 18.6 cm
Weight: can't give exact, it's just slightly heavier than an unsharped wooden pencil -
Date: Tue, Oct 30 2007 14:02:51QUOTE (Crzyazn @ Oct 28 2007, 09:31 PM) <{POST_SNAPBACK}>What size lead does the GJH pencil mod use?
o.7 or o.5 - there are 2 versions of jedos/pentel sharp -
Date: Wed, Oct 31 2007 02:21:10QUOTE (bry @ Oct 30 2007, 12:12 PM) <{POST_SNAPBACK}>how much shorter is the black and blue comssa mod capthan the white cap?
negligible, about 2-3mm -
Date: Fri, Nov 2 2007 16:34:23QUOTE (Jonas)How do I get the text off the comssa pens without damaging the body? I don't want to spin until it goes off.
I don't know if it feels the same but try acetone...ask K4S he knows
.
-
Date: Mon, Nov 5 2007 00:40:24QUOTE (Pantagruel)What pen does MBM use in this combo?
It looks like MMX with grip in front and on the cap (with no clip on cap) but I'm not sure.
hmmmm...I finally saw it and doubted it being a AMMX until I saw a something like a reflection on the supposedly HGG grip part and I just thought that it's most likely the G2 piece with a dark insert...I'm no pro pen modder though so I'm not sure^^'... -
Date: Mon, Nov 5 2007 14:15:43
ok so i made an Any-X mod a couple of days ago but there was one part that confused me from the tutorial.
QUOTE5. Make a mark on the inktube 3,4 cm from the tip so that the spring can't go over it.
im not too sure what that means, i ended up just measuring it off at 3.4cm and wrapped some tape until it was thick enough at that point to keep the spring from going past it. But can some one explain what the proper way is?
*Any-X tutorial* -
Date: Mon, Nov 5 2007 14:22:50
You squeeze the inktube at 3.4 cm with pliers so it get's wider at that spot. That way, it won't pass the spring. Looks more proffesional then tape
-
Date: Mon, Nov 5 2007 14:26:21
ah ... well i tried that but the spring kept getting past it ...i wasn't sure if i pressed the ink tube too much the tube itself would split and spill the ink or if the pen would loose the ability to write if the tube was pressed too tightly.
-
Date: Mon, Nov 5 2007 15:26:51
This is how I do it.
-
Date: Mon, Nov 5 2007 20:37:40
Or you could just do what i do and make your Any-X accommodate an insert so you dont see the tape that holds the spring
-
Date: Mon, Nov 5 2007 20:41:05
well you cant really dont notice the tape unless your looking for it on my Any-X mod. only about a millimeter of it is showing because the rest is hidden by the front part of the pen. but thanx to both of you for the help i'll try and pinch the ink tube a little wider next time and see if it works
-
Date: Mon, Nov 5 2007 22:27:40QUOTE (Pearl)Do the shipping from PenWish is long <.< ?
Cause I can't wait aha
Since you have the canadian flag I assume you are in canada.
This is quote from the penwish guy in the penwish thread in the trade/buy area about shipments to canada.QUOTE (Penwish)out of all the countries i ship to it seems canada's shiping time is the most inconsistent ranging from a few days to a few weeks hah -
Date: Mon, Nov 5 2007 22:49:08
also depends if customs decides to open your package which generally delays it a good 3-4 days
-
Date: Tue, Nov 6 2007 01:05:26
i dont have a commsaa but i think i found osme replacements
What is the length of a commsaa without tips and the circumfrence of the barrel? -
Date: Tue, Nov 6 2007 08:10:50
what song are in International collab(ICOLLAB)??i really need that song.
http://www.youtube.com/watch?v=cJrLaB6VLRc -
Date: Tue, Nov 6 2007 19:21:32QUOTE (Look into the Sun)QUOTE (sketching)So what does a backaround 1.5 fall look like and what does a backspin 1.5 fall look like?QUOTE (Look into the Sun)Shouldn't the backaround 1.5 be... backspin 1.5? Since, it's thumbspin 1.5 and not thumbaround 1.5.@Look into the Sun: it depends on how you perform it. The way I tend to perform Backaround 1.5, it would be broken down as:
Backaround T12-T12[p][s 1.0] ~ Halftap ReverseT12-T12[s 0.5][c]
@Look into the Sun: The Backaround 1.5 that I'm talking about is similar to how KiT-CaT performs his, but on both the thumb and index finger, check his website for a video.
Backspin doesn't have a definite starting/ending position since it only means spinning on the back of the hand. You could do Backspins from any position with any kind of push and catch you want, just like Thumbspin...Thumbspin doesn't have to look anything like a Thumbaround.
"Backaround 1.5" Fall can look like a Backaround Fall as orginally intended...
Backaround 1.5 T12-T1-23 > Backaround 1.5 23-T1-34 > Backaround 1.5 34-T12
For this combo, the pen can more easily spin on the back of the hand for the second & third Backarounds, they could be called Backspins if you wanted.
...it could also be something like...
Backaround T12-T1-23 > Backaround 1.5 23-12-34 > Backaround 1.5 34-23-34
For this combo, the pen is spinning around individual fingers instead of passing through the T1 slot each time, with the pen spinning 0.5 on the back of the hand which could also be called Backspin. -
Date: Thu, Nov 8 2007 00:21:23QUOTE (Aries)For metallic comssa are there any subtittutes for the tips(HGG's) would HGR's work????
HGRs do work. But, only the ones with no grips. The tips on the ones with grips are too big. The HGR with no grip has the exact same tip as the HGG. -
Date: Fri, Nov 9 2007 02:02:58QUOTE (Crzyazn)How do you add an HGG tip to the blue PDS comssa cap without glue or some other permanent bond?
the nub on the blue cap is slightly bigger, and i cant get a tip on it
Tip attachment - to black or blue PDS Dong-A Computer Sign Pen
It was first mentioned in the Quick Modification Questions thread. -
Date: Fri, Nov 9 2007 03:24:47QUOTE (Imagm-1337)Is there such thing as a NeoBak Reverse?
Yes there is such thing as a neobak reverse. It feels like doing a shadow but shadows and neobak rev are not the same. -
Date: Fri, Nov 9 2007 04:10:38
Neobackaround Reverse
-
Date: Sat, Nov 10 2007 05:34:31QUOTE (WhiteFang)is there such thing as Weis'Bakaround Rev??QUOTE (WhiteFang @ Nov 10 2007, 05:24 PM) <{POST_SNAPBACK}>regular BackAround Rev looks like Korean Bak Rev.. not Weis Bakaround Rev,
No, just because it's more commonly done doesn't mean it is the norm. And most of them are Fingerless Indexarounds anyway. -
Date: Sun, Nov 11 2007 18:10:05QUOTE (sketching @ Nov 8 2007, 11:10 PM) <{POST_SNAPBACK}>Neobackaround Reverse
Lol sketching, that looks "VERY" MUCH like a shadow though. -
Date: Sun, Nov 11 2007 18:27:24
Except that the pen is just barely touching the base of the knuckle.
I'm still not that good at actually getting the pen far enough down the hand for Neobaks Reverse (I don't ever practice it). Most of the time, I end up just doing Fingerless Shadows instead. 
-
Date: Sun, Nov 11 2007 20:10:09QUOTE (sketching @ Nov 11 2007, 01:27 PM) <{POST_SNAPBACK}>Except that the pen is just barely touching the base of the knuckle. I'm still not that good at actually getting the pen far enough down the hand for Neobaks Reverse (I don't ever practice it). Most of the time, I end up just doing Fingerless Shadows instead.
That's uhh a very big difference there. Then I think I am doing Neobak Reverses all the time instead of shadow because when I do shadow(still), the pen spins on middle of my fingers. -
Date: Sun, Nov 11 2007 20:11:47
Shadows are supposed to only spin on the fingers. Neobaks go onto the back of the hand.
-
Date: Wed, Nov 14 2007 07:20:25QUOTE (TEK)ok quick question
When trading with some one in japan, and they give you their address.
is there any transation that needs to be done?
or some type of format that needs to be written on the package?
thank you
Full name (first to last in this case)
Street address
City, prefecture
7 digit postal code
Japan
Example:
First Last
X-XX-X Yamato-machi (make sure to use the right suffix; machi: street, ku: district, etc.)
Sendai, Miyagi
XXX-XXXX
Japan
Edit: Error. -
Date: Wed, Nov 14 2007 09:55:31
lolz....lots of questions in one post to save space....and...posts?hmmm...yes my '1 questions'
what is the length of a dr.kt without grips and tips and with....the length of the barrel...the length of the caps...thickness of the barrel... -
Date: Sat, Nov 17 2007 02:17:14QUOTE (krash)I know how to do a regular extended TA but what's a "extended TA T1-12-23"?
@krash: where did you see that notation?
I would guess that it could mean something:
Thumbaround ~ Fingerless Passaround T1-12 > Passaround 12-23
After the Thumbaround, you do a fingerless push that gives the pen enough momentum to then flip over the middle finger just like it normally does when going over the index finger in Extended Thumbaround.
...but, I would still like to know where you saw that notation used. -
Date: Mon, Nov 19 2007 03:41:20
i'm trading with this japanese guy
and i asked him for dr.grips and he took a picture of them.
but i was jsut wondering if they where shaker kind or not...what do you guys think
QUOTE (Rekkuuzan)I would think all their Dr. GRIP mechanical pencils are shakers. Nice trade by the way. -
Date: Mon, Nov 19 2007 21:46:47
lol ok...
this is a different trade guys...
@ White Fang:
2 Rsvp Colors
1 yellow sunburst
2 sky blue rsvps
2 pink rsvps
1 blue
1 green
for bonkura kt, 10 sailors, 2 dr. grip tips
that was the trade i told you about.
@ pearl:
the mx^2 was for the 9 sailors...
and this one...is to a different guy.
7 dr. grips
10 miffy's
4 kietyo pens
for 5 rsvp colors packs
2 retracable rsvps
3 green rsvps
3 purple rsvps. -
Date: Thu, Nov 22 2007 02:49:38QUOTE (ellusion67)what is the first pen spinning community in pen spinning history??
i think Mr. Kondoh's site had a BBS on it. -
Date: Thu, Nov 22 2007 23:52:35QUOTE (sketching @ Nov 16 2007, 11:17 PM) <{POST_SNAPBACK}>@krash: where did you see that notation?
I would guess that it could mean something:
Thumbaround ~ Fingerless Passaround T1-12 > Passaround 12-23
After the Thumbaround, you do a fingerless push that gives the pen enough momentum to then flip over the middle finger just like it normally does when going over the index finger in Extended Thumbaround.
...but, I would still like to know where you saw that notation used.
here http://z15.invisionfree.com/UCPSB/index.ph...p;#entry1666141
and here http://www.upsb.info/forum/index.php?s=&am...ost&p=18835 -
Date: Sun, Nov 25 2007 04:28:12QUOTE (Tim)What's the marker mod that Kaisen uses/used again? It had a tutorial on turtlespin, but that's down. The one that he used for 'Impulse'
It should be the S360 Color Pen Mod... by kaisen. -
Date: Fri, Nov 30 2007 07:32:01
what is the thickness of the barrel of a KT and a ComSsa
-
Date: Fri, Nov 30 2007 08:13:47
I don't know the answer to the question, but seeing as this question is quite common maybe we should have that in the wiki. ( just a suggestion, discussion on the comssa article isn't working for me)
EDIT: that was about bry's post. -
Date: Fri, Nov 30 2007 08:20:12QUOTE (WhiteFang @ Nov 30 2007, 08:25 AM) <{POST_SNAPBACK}>
Mintjam - Rival -
Date: Mon, Dec 3 2007 19:59:45QUOTE (Sfsr)Does anyone have a download link to Evolution? I had it on my computer before, but it somehow got lost, and now Turtlespin's down since long
http://www.megaupload.com/?d=5D0BBM1Z -
Date: Tue, Dec 11 2007 15:04:55QUOTE (WhiteFang @ Dec 11 2007, 05:35 AM) <{POST_SNAPBACK}>is there a site where they tell us all the information about world tournament 07? like.. information on who VSed who and who won.. etc..
crash's website is down ATM because he's preparing for the new World Cup website, sorry... -
Date: Thu, Dec 13 2007 23:59:12
Does the Canadian store Grand and Toy still sell HGGs?
-
Date: Fri, Dec 14 2007 03:33:33
A while ago nateiskewl said that the GJH used a signo tip in the back. Now that i own one...i can clearly see that tip has a ridge on the bottom (meaning it isn't a signo tip). This means that LSC must be using metal tipped G3s. Where is LSC getting metal G3s?????????
I thought the metal tips were discontinued...
-
Date: Tue, Dec 18 2007 07:51:37QUOTE (Crzyazn)What's goin on in Korea? I haven't heard any news or seen any new collabs from KPSA and PDS in a while...
nothings happening in korea.. -
Date: Tue, Dec 18 2007 08:23:57
Nory from KPSA. Does he have a solo video?
-
Date: Tue, Dec 18 2007 13:18:21
@Fallen... I was just looking into it, and it seems that you can dl from putfile, but only if it's an old video. Right click the video, press properties and paste the link under location in your url bar. Sorry if you already knew this and wanted to download newer videos, this might help others though, so I posted it.
-
Date: Thu, Dec 20 2007 19:56:07QUOTE (Sfsr)Would 2500Â¥ (~$20) be a fair price for 2 Miffy&Melany pens and 6 Sailor Gel grips (with shipping included)?
6 sailors are about 10$, and shipping... EMS costs 1500 yen (with Dr.KT,) but I dunno what kind of shipping includes your price Miffy's are cheap but rare, so I don't know what's their price
-
Date: Thu, Dec 20 2007 20:49:15
Is there a way of making an RSVP MX (or MX^2) a bit longer? cuz I friend gave me a plastic magic wand (LOL, don't ask me where he found it) which was very comfortable for spinning, and it was about 24-25 cm long.... so is there a way of making the MX longer? I don't ask abput other mods or pens cuz I can't make alot of different mods because I have a lack of metariels here in Israel.... but any other long pen suggestions will be good.
P.S sorry for any spelling or grammer mistakes if there are any. -
Date: Mon, Dec 24 2007 04:24:07
Sorry to above poster...dont know
I heard that some dollar stores in the US have HGGs, anyone know the specific store names?
Near my home there is a Dollar Tree and Family Dollar and they dont seem to have any -
Date: Mon, Dec 24 2007 10:13:32QUOTE (jess)I'd just like to know what the "FL" in FL TA stands for ^^;
FL = FingerLess -
Date: Mon, Dec 24 2007 11:02:47QUOTE (LMnet @ Dec 24 2007, 02:19 AM) <{POST_SNAPBACK}>In "Just perfect" video who made the last combo?
HunlanLin. -
Date: Mon, Dec 24 2007 13:23:46QUOTE (Rekkuuzan @ Nov 9 2007, 10:05 PM) <{POST_SNAPBACK}>Anyone know what is this "Flying Colors, Focus" Donk3y speaks of in this R³ tutorial?
i believe 'Flying Colors' means bieng good at modding
and 'Focus' means sitting down and taking time with this mod, to not mess up. -
Date: Mon, Dec 24 2007 14:34:01QUOTE (WhiteFang @ Dec 23 2007, 07:24 PM) <{POST_SNAPBACK}>whats the weight difference between RSVP normal and surburst normal
sunburst has a bigger inner diameter gel ink heavier... -
Date: Thu, Dec 27 2007 16:46:17QUOTE (Imagm-1337)So, you know how Out-In Sonic is Sonic 34-23 -> Inverse Sonic 23-12, right? But what I did is Sonic 34-124 -> (The middle finger moves out of the way which becomes 14) Inverse Sonic 14-12. Can that be a new hybrid or is it just a variation of the Out-In Sonic? Or is it just retarded?
@Imagm-1337: The hybrid that you described is how Out-In Sonic is supposed to be performed, it's a hybrid not a combo. The combo that you described before (Sonic 34-23 > Inverse Sonic 23-12) doesn't have a name, it's just a combo. -
Date: Thu, Dec 27 2007 19:17:42QUOTE (t3tsubo)in an inverse sonic clip breakdown, do you call the charge motion an "inverse charge"?
Yes, Inverse Charge has the center finger stuck out instead of bent in.
Inverse Sonic Clip 23-12- Informal
- Inverse Sonic 0.5 23-12 ~> Inverse Charge 1.0 13 >~ Inverse Sonic 0.5 23-12
Formal - Inverse Sonic 23-12[p][s 0.5] ~ Inverse Charge 1.0 13 ~ Inverse Sonic 0.5 23-12[s 0.5][c]
-
Date: Fri, Dec 28 2007 03:16:47QUOTE (sketching @ Dec 27 2007, 11:46 AM) <{POST_SNAPBACK}>@Imagm-1337: The hybrid that you described is how Out-In Sonic is supposed to be performed, it's a hybrid not a combo. The combo that you described before (Sonic 34-23 > Inverse Sonic 23-12) doesn't have a name, it's just a combo.
@sketching: http://www.youtube.com/watch?v=IEBFrRS_Tps
Is that Out-In Sonic? 'Cause the way I explain it is not preformed this way. -
Date: Fri, Dec 28 2007 04:21:50QUOTE (WhiteFang @ Dec 23 2007, 03:24 AM) <{POST_SNAPBACK}>whats the weight difference between RSVP normal and surburst normal
Different design and the sunburst barrel is bigger. The sunburst is a gel pen. The RSVP normal is a ballpoint. -
Date: Fri, Dec 28 2007 20:59:56QUOTE (jackolanternsoup @ Sep 25 2007, 10:03 AM) <{POST_SNAPBACK}>Is there an English Pen Spinning Community?
Has anyone actually heard of any English pen spinners?
Lol... evidently i'm interested..
And also what're good camera specs to use for pen spinning videos? i get really irritated when i watch these vids with something like 1 fps and really bad quality...
YES there is one now (PSUK) theres about 19 of us and whitefang joined for some reason lol iunno. and im the first irish one woot theres also foons and tadhgg that are irish but theyre not dedicated lol (iam!!) . Health,Mats,Hikari are welsh . Asakawa,sh0wbiz/jakemon, CrAsH, smig , gwobbles ,dalj , IVESOUND , Inexistence , BDeyes (not active was in the last board but not in the new one) , xxWildyxx (not active was in the last board but is not in the new one) , Astonwebsters , Tolu (not active hes never posted before) , grahamr 07 and grahamr 06 ( not active .i think theyre the same perosn and theyve never posted). -
Date: Sat, Dec 29 2007 12:56:15
Two questions.
- What was the reason that Fratleym never used the 3000*F in his last world tournament video? I remember that he said he would, and I remember some people from FPSB saying that he didn't, but I never heard the reason.
- What happened to the World Tournament insert?
- What was the reason that Fratleym never used the 3000*F in his last world tournament video? I remember that he said he would, and I remember some people from FPSB saying that he didn't, but I never heard the reason.
-
Date: Tue, Jan 1 2008 03:34:04QUOTE (K4S @ Dec 31 2007, 02:28 PM) <{POST_SNAPBACK}>QUOTE (Foofdude)Do you have to be one of the 1 out of 20 that can do this in order to do Inverse Sonic 34-23 well?
Nope, i cant do that pinky palm touch and i can do inverse sonic 34-23 just fine...palm sideways or palm down.
I can do that with my right, but not my left. The months of pen spinning increase flexibility by a lot. My right hand is actually more "muscular" when i flex them compared to my left. -
Date: Fri, Jan 4 2008 00:22:13QUOTE (Rekkuuzan)Good question Tim. It's been on the back of my mind for a little while. Did it ever leave Mr. LSC?
Mr.LSC is supposed to have sent them a long time ago, the problem is that KitCat never said he received them...yet. -
Date: Fri, Jan 4 2008 02:36:47QUOTE (Outlander @ Jan 3 2008, 08:48 PM) <{POST_SNAPBACK}>I've seen people spinning wha seems like unmodded Dr. Grip Shakers in colabs.
Do people change anything on them? Like with the shaker mechanism?
I've only seen Aysh spin with a Dr. Grip shaker, but people could leave it, or just take the shaker mechanism out. That's all there is to it. -
Date: Fri, Jan 4 2008 19:51:57QUOTE (Outlander)I'm trying to make a RSVG2 and I'm having trouble witht he rsvp cap. Is it supposed to cover the clicker band on the g2? because then I think I'd have to sand it down for the rsvp cap to fit.
The picture on the wiki is small and it seems as though its covering the clicker band on the g2 pen, but it never said that you'd have to sand it down for the rsvp cap to fit on.
thanks
I added more to the steps at the end of the RSVG2 wiki article. You can do one of two things: shave the band until the RSVP cap fits or remove the band and use tape on the G2 until the cap fits. For the photo in the wiki, I just removed the band so that the RSVP cap could be pushed farther on for a tighter fit. -
Date: Sun, Jan 6 2008 11:57:05
does someone have a picture of princess' pen? it looks like it's not using a regular rsvp-body...
-
Date: Mon, Jan 7 2008 16:40:16QUOTE (Outlander)Does anyone know any mods using bic crystals? I know that they don't have much of a chance to be modded, but my boss just told me to throw out a box of stuff and I snagged 2 boxes of them, as well as 1 box of g2's and bic stic grips
Bic Cristals are sweet to write with :> As for modding, nothing that works.
The G-2s and Bic Stics are sweeter though :D -
Date: Tue, Jan 8 2008 08:49:06QUOTE (Novastrike @ Jan 8 2008, 12:19 AM) <{POST_SNAPBACK}>May I know what's the difference between
Bakriser
Bakriser 2.0
Is it represents the number or rounds that is going to spin in the air?
Bakriser 2.0 = Bakriser which has a TOTAL of 2.0 rotations (eg, 1.0 rotations around the hand and 1.0 in the air)
Bakriser = notation used by people who are too lazy to find out or write the number of rotations.
-
Date: Tue, Jan 8 2008 17:07:45QUOTE (Novastrike)There is zero tutorial on bakriser now, I will be grateful if someone made one.
So a big thank you to you =)
I don't think a tutorial is needed, just do a Backaround. When the pen is on the back of the hand, quickly jerk the hand upward to launch the pen into the air. As it comes down, catch the pen like you would a Backaround. Done. -
Date: Tue, Jan 8 2008 18:34:39
does someone have a picture of nory's pen? it looks like it's made like flexible MX but it looks much longer
-
Date: Wed, Jan 9 2008 20:00:23QUOTE (LMnet)What is the difference between trick release and trick riser?
Release is usually with finger movement, Riser with hand movement. -
Date: Wed, Jan 9 2008 22:49:02QUOTE (Imagm-1337)Is Inverse Reverse Demon's Sonic this way : Inverse Reverse Sonic 12-13 -> Pass Reverse 13-34? Or is it Inverse Reverse Sonic 12-13 -> Pass Normal 12-34?
Pass reverse -
Date: Thu, Jan 10 2008 02:53:43QUOTE (Outlander)Does anyone know an alternative for the center grip on a grip aviare? I'm pretty sure the one used in the original mod is not available in the states...
An RSVP grip works. Other alternatives are an HGG grip, or maybe an Easy Touch grip. -
Date: Thu, Jan 10 2008 05:50:06QUOTE (sketching @ Jan 9 2008, 01:07 AM) <{POST_SNAPBACK}>I don't think a tutorial is needed, just do a Backaround. When the pen is on the back of the hand, quickly jerk the hand upward to launch the pen into the air. As it comes down, catch the pen like you would a Backaround. Done.
You could also visit the Troposphere, NHK describes how it is meant to be done. -
Date: Thu, Jan 10 2008 09:05:05QUOTE (LMnet @ Jan 10 2008, 04:35 AM) <{POST_SNAPBACK}>So, riser for FL tircks, release for others?
hey LMnet.
Riser is when you do say, half a backaround, then when the pen is still spinning on the back of your hand you move your hand upwards to push the pen up.
Release is when you flick the pen upwards by pushing it with the fingers.
er.. do you get it?
-
Date: Sat, Jan 12 2008 12:27:29QUOTE (Sfsr)QUOTE (WhiteFang)QUOTE (Sfsr)Does any form of lighter green anyball/profile/star gels max fake exist, or is the regular green as found all around the only green available?
there is no lighter green..theres only the regular green..
Have you checked all available fake anyball grips? :/
ive checked all i know..
i'm not 100% sure but i'm about 90% sure. -
Date: Sun, Jan 13 2008 11:11:36
Could someone upload PSN 1st for me, preferable on mediafire?
-
Date: Mon, Jan 14 2008 22:52:07QUOTE (yxTay @ Jan 9 2008, 09:33 PM) <{POST_SNAPBACK}>Isn't Demon's Sonic this: Sonic Normal 34-23 ~ Pass Reverse 23-12? Then shouldn't Inverse Demon's Sonic be Inverse Sonic Normal 34-23 ~ Pass Normal 23-12 and Inverse Demon's Sonic Reverse, therefore, be Pass Reverse 12-23 ~ Inverse Sonic Reverse 23-34? Inverse Sonic Reverse 12-23 ~ Pass Reverse 23-34 will be called Inverse Mirror Demon's Sonic Reverse or something of the like.
http://ca.youtube.com/watch?v=z4dtmkcDyzg Look at the video. Demon's Sonic Reverse is Sonic 12-13 ~> Pass NORMAL 13-34. So Inverse Reverse Demon's Sonic would be Inverse Sonic 12-13 ~> Pass REVERSE 13-34
-
Date: Mon, Jan 14 2008 23:54:09QUOTE (Fallen Glory @ Jan 14 2008, 06:34 PM) <{POST_SNAPBACK}>Does anyone have an English Tutorial for the Grip Aviare?
http://s15.invisionfree.com/UCPSB/index.php?showtopic=2430 -
Date: Wed, Jan 16 2008 05:43:54QUOTE (Outlander)I've been doing this thing for a while now, and I don't know what its called.
It's essetially the same finger movement with the pointer finger as in a reverse TA (that scratch-push motion), but the pen does 0.5 revolutions and rotates on the same area of the hand as a half tap (but its going the other way around) and doesn't go around the thumb, only rotating at the same area of the had as a halftap. My camera isn't working so I can't get a clip of it at the moment.
It starts with the pen resting on the knuckle of the pointer closest to the back of the hand and the last knuckle on the middle finger (rotates in a clockwise manner from the top)
Thanks GuysQUOTE (scyros @ Jan 16 2008, 12:34 AM) <{POST_SNAPBACK}>reverse half tap
nice, thanks scyros. I found this vid on youtube and it looks just like what i'm doing, thanks.
-
Date: Fri, Jan 18 2008 10:20:23QUOTE (Aries)When i try to put Keicho caps on the comssa, it's way too long(23cm) is it supposed to be or do i modify the comssa, if so tell me how.
If this is what you mean, here's a tutorial in English on how I do it at least. -
Date: Sun, Jan 20 2008 08:56:05
I've got a two questions.
Can someone post a picture of an uncapped bictory? I'm having a little trouble making it and this will help me.
What is the trick that Key3 does in PSN 4th where he "claps" his fingers together and does some weird two hand wiper or something? -
Date: Sun, Jan 20 2008 09:00:23
An un-capped BICtory will look like this, but using Bic Round Stics. Both sides will look exactly the same.
-
Date: Sun, Jan 20 2008 17:49:06QUOTE (dust_kid)Once you take out the ink tube, how do you take out the black thing that was holding it, or do you not need to take it out?
You remove everything from the front of one the Round Stics and place it all on the back of the other Round Stic. -
Date: Sun, Jan 20 2008 20:00:14QUOTE (K4S)Just curious, how come Cloudtraveller isnt competing in the world cup? PS hiatus?
studying. -
Date: Sun, Jan 20 2008 23:38:41QUOTE (dust_kid @ Jan 20 2008, 03:52 PM) <{POST_SNAPBACK}>How do you take it out, I've tried pliers but it won't budge.
I've made two different BiCtory mods, and with the one I was able to simply pry off the cap on the back. For the other one, I needed to squeeze the end of the pen just a bit with the pliers. This made it a lot easier for the cap to come off.
-Arcturus -
Date: Mon, Jan 21 2008 12:54:09QUOTE (Arcturus)Take a look at these pens:
http://img54.imageshack.us/img54/540/pap0002vk1.jpg
They seem to have some kind of rubber webbing on them; what is that? It looks awesome...
-Arcturus
It's patterns cut out of the grip, it's Ayatoris Lakubo Jell mod. I'm not sure how the patterns in the backcap work though, could be just paper over a grip. -
Date: Fri, Jan 25 2008 14:43:36QUOTE (Sfsr @ Jan 12 2008, 05:00 AM) <{POST_SNAPBACK}>Does any form of lighter green anyball/profile/star gels max fake exist, or is the regular green as found all around the only green available?
sorry.. but was the lighter green you were looking for loo something like this?
-
Date: Fri, Jan 25 2008 16:37:08
There are two different shades of green. Profile pens are a darker green while anyball are slightly lighter green
edit: those colors are not exact, but it's close enough for you to understand :> -
Date: Sun, Jan 27 2008 05:24:27QUOTE (Desending_Darkness @ Jan 27 2008, 04:33 AM) <{POST_SNAPBACK}>Q: what the best type of pen for doing a TA reverse?
A very tough question! You will get a different answer from most spinners. The best pen for doing a TA Reverse with, is probably the one you feel most comfortable with doing around tricks! -
Date: Sun, Jan 27 2008 12:12:17QUOTE (dust_kid)I want to know the members of NF, Evolving Spinners and Force Spinners.QUOTE (Zombo @ Jan 27 2008, 01:28 PM) <{POST_SNAPBACK}>he wants a list of the members in each of those 3 teams.
oh..i see..i got confused somehow..
ive asked the KPSA guys and most of them said they don't know themselves because the list is way too big.. -
Date: Mon, Feb 4 2008 20:09:11QUOTE (Eso)Does the print on Sunburst barrels rub out over time? If so, how long does it take on average?
I know you can remove it with acetone :D Which should mean it will also rub out over time. A lot of time. -
Date: Mon, Feb 4 2008 20:15:35QUOTE (Eso @ Feb 4 2008, 03:46 PM) <{POST_SNAPBACK}>Does the print on Sunburst barrels rub out over time? If so, how long does it take on average?
It's effing hard to get rid of the print using the typical white eraser method so likely the print will last a significant amount of time. Of course someone who spins more than me can probably field your question a little better :x -
Date: Thu, Feb 7 2008 12:48:22
can someone please tell me what is the length of RSVP NX MMT?
-
Date: Fri, Feb 22 2008 13:57:41
How much are UCPSB v1 and v2 Bics worth, and what would their trading ratios be?
-
Date: Fri, Feb 22 2008 15:23:57
Does anyone know the cost/trade ratio of Sailor gel ice colors(light blue, pink, orange, light green) to like sunburst and rsvp colors?
-
Date: Sat, Feb 23 2008 02:00:32QUOTE (AntonWebsters @ Feb 5 2008, 01:20 AM) <{POST_SNAPBACK}>Ext TA T2-23 (Asian style) > pass rev 23-12 > bak rev 12-12 > shadow still normal 12 > FL Ext TA > Shadow rev 12-T1 ~ FL TA rev T1-T2 > pass normal T2-23-12 > neo-sonic 12-T1 ~ FL TA rev T1-T2 > TA T2-T3 > TA rev T3-T4 (Ring Flick) > Ext TA T4-34 (Kam style) > RA 34-34 > sonic clip 34-23 ~> pass normal 24-12 > neo-sonic 12-T1 ~ FL TA rev > Ext Bak 12-12 cont x2 > Bak release 12-Palm catch
This is the breakdown of Bonkura's combo in 4th WT...
Can anyone tell me what's Extended Bak 12 - 12?
I've never heard of Extended Baks before.
Who broke this down for you? I just don't like this breakdown...
Here's the breakdown from the BonkuraBreak site:
[SD] Ta Extend T1-23 > Pass 23-12 > BackAround Reverse 12-12 >
[DN] Shadow 12-12 > Fl Ta Extend T-12 > BackAround 12-T1 >
[SD] Fl Ta Reverse T1-23 > Pass 23-12 > NeoSonic 12-T1 > Fl Ta Reverse T1-T2 > Ta T2-T4 > Ta Reverse T4-T4 > Fake Double T4-34 > RingAround 34-34 > Sonic Clip 34-24 to Hybrid Pass 24-12 > NeoSonic 12-T1 > Fl Ta Reverse T1-12 >
[DN] BakRiser 1.5 12-12 x2 > BakRiser 12-T1234
-
Date: Wed, Feb 27 2008 02:19:00
What are the colors of cloud traveler's comssa he used in his solo video: http://youtube.com/watch?v=Fyi4yjIkyQE
-
Date: Thu, Feb 28 2008 03:50:29QUOTE (Kyosuke)What mod is Zyavuxa using in this video? http://www.youtube.com/watch?v=kkvGrL3Vvz8
that movie has something to do with key3...
maybe it's the key3 G3 mod -
Date: Fri, Feb 29 2008 01:12:21QUOTE (MX kid)How long is the length of an HGG in centimeters?
Pen: 15 cm
Grip: 3.4 cm -
Date: Sat, Mar 8 2008 14:21:52
You guys know what zyavuxa's mod uses and materials? woops there's two questions there but I need to know. Sorry again.
-
Date: Sat, Mar 8 2008 16:44:33QUOTE (ellusion67 @ Mar 8 2008, 11:11 AM) <{POST_SNAPBACK}>which one is the best GJH??..
GJH variation by sathon or GJH
I haven't spun a GJH variation, but they're probably the same. I'd say the original GJH is a little bit better, but they're most likely the same. -
Date: Mon, Mar 10 2008 14:41:06QUOTE (K4S)Does HGG ink dry out easily/quickly (to the point where it can no longer write) if it's not capped with it's usual rubber stopper?
...by "rubber stopper" i mean the rubber section in the cap that presses against the writing end of the hgg inktube to prevent it from drying out.
No, they will not dry out easily, but they will dry out eventually. Differs from color to color, light colors die faster than dark. Also, as long as you write with them now and then I don't think they'll dry out so fast, it's mostly if they just lie around uncapped and unused for a month or two-three. -
Date: Mon, Mar 10 2008 22:23:40QUOTE (QuestionMark @ Mar 10 2008, 12:17 PM) <{POST_SNAPBACK}>Since I was stupid enough to ask a question in the shoutbox and then go AFK-
What's the length of NX MMT and MMX?
I jeard people say that the NX MMT is just too long... so before I make one I wanted to know.
MMX is the same as an mx(18.5cm), and nx mmt is around 21.5cm
well heres my question.. again.. what are the colors of cloud travelers comssa? -
Date: Wed, Mar 12 2008 05:51:18
Can i get a picture of hantaro's kt? not when it spinning, just laying there
-
Date: Thu, Mar 13 2008 13:47:00QUOTE (Rorix @ Mar 13 2008, 05:45 AM) <{POST_SNAPBACK}>What pens do Sfsr, vicgotgame and Nory use in their world cup vids?
Sfsr uses a Black Bonkura CT, vicgotgame apparently uses an all black metallic comssa though I'm not 100% sure about that one. Nory uses an all white rushon mod. -
Date: Thu, Mar 27 2008 16:12:16
Hey in a certain way, a neobak 12-t1 is a reverse moonwalk passaround?
-
Date: Thu, Mar 27 2008 18:07:05QUOTE (penspinoob @ Mar 27 2008, 10:12 AM) <{POST_SNAPBACK}>Hey in a certain way, a neobak 12-t1 is a reverse moonwalk passaround?
I think that that would be called a backaround. -
Date: Thu, Mar 27 2008 18:18:21
Why aren't multiple spin tricks used more often?
-
Date: Thu, Mar 27 2008 21:00:00
I guess 'cause...
- they're hard to get constant
- they're hard to get an exact amount of spins (atleast 2.5 +) -
Date: Thu, Mar 27 2008 21:29:14QUOTE (Sfsr @ Mar 27 2008, 02:00 PM) <{POST_SNAPBACK}>I guess 'cause...
- they're hard to get constant
- they're hard to get an exact amount of spins (atleast 2.5 +)
That's true, but it'd still be nice to see them more often. It's a challenge, but I'm sure most pen spinners are up to it. -
Date: Thu, Mar 27 2008 22:09:37QUOTE (Sfsr @ Mar 27 2008, 09:00 PM) <{POST_SNAPBACK}>I guess 'cause...
- they're hard to getconstantConsistant
- they're hard to get an exact amount of spins (at least 2.5 +)
Don't forget they are difficult to link into...
I agree though LItS, it would be fantastic to see more big spin tricks, especially several multiple spin tricks within a combo. I've been pushing Asakawa on PSUK to do some big shadows and man are they SEXY. I hope he puts them into a combo; I hope some really skilled spinners put big spin tricks into combos more often. -
Date: Fri, Mar 28 2008 14:17:59
well, i was wondering what pen key3 and NIKoo are used in this video http://youtube.com/watch?v=58eYe07L0G4
I heard key3 's pen is a g-3mod but after looking carefully it didnt look alike. HELP!
-
Date: Sat, Mar 29 2008 18:57:40QUOTE (Skybreak @ Mar 28 2008, 08:17 AM) <{POST_SNAPBACK}>well, i was wondering what pen key3 and NIKoo are used in this video http://youtube.com/watch?v=58eYe07L0G4
I heard key3 's pen is a g-3mod but after looking carefully it didnt look alike. HELP!
I'm not sure about NIKoo, but Key3 is using his version of the G-3 mod. There's a tutorial for it, but it's completely in Japanese.
Here's the Link: http://annkou2.blog105.fc2.com/blog-entry-177.html -
Date: Sun, Mar 30 2008 15:45:55QUOTE (NiGHTSora @ Mar 29 2008, 10:57 AM) <{POST_SNAPBACK}>I'm not sure about NIKoo, but Key3 is using his version of the G-3 mod. There's a tutorial for it, but it's completely in Japanese.
Here's the Link: http://annkou2.blog105.fc2.com/blog-entry-177.html
Well im looking at it and it looks nothing like it... are you sure? -
Date: Sun, Mar 30 2008 19:38:16
i agree. the 2 pens dont look alike. XD
-
Date: Sun, Mar 30 2008 19:59:07QUOTE (Skybreak @ Mar 30 2008, 08:45 AM) <{POST_SNAPBACK}>Well im looking at it and it looks nothing like it... are you sure?
The one shown in the tutorial isn't key3's actual own. It's a G-3 (plastic ver.) mod because it uses its body and plastic tip. -
Date: Mon, Mar 31 2008 01:38:06QUOTE (Rekkuuzan @ Mar 30 2008, 11:59 AM) <{POST_SNAPBACK}>The one shown in the tutorial isn't key3's actual own. It's a G-3 (plastic ver.) mod because it uses its body and plastic tip.
do you have a tutorial or anything that can show me how to make it? -
Date: Mon, Mar 31 2008 04:47:59QUOTE (Skybreak @ Mar 30 2008, 06:38 PM) <{POST_SNAPBACK}>do you have a tutorial or anything that can show me how to make it?
I think you misunderstood me there.
The tutorial you were given the link to is the correct way to make key3's G-3 mod. The image shown just isn't his own particular pen. That's probably why you got confused, thinking it doesn't look like it because the colour scheme is different.
As for NIKoo's mod, I'm positively sure it uses a G-3 as well by the looks of it. I have yet to see a request of instructions for its assembly on JEB or anywhere else, but I'll keep an eye out. -
Date: Tue, Apr 1 2008 07:46:23
Who are some good spinners that use a variety of infinity-hybrid tricks? Thanks
-
Date: Tue, Apr 1 2008 08:00:02QUOTE (Mats @ Mar 28 2008, 12:09 AM) <{POST_SNAPBACK}>QUOTE (Sfsr @ Mar 27 2008, 11:00 PM) <{POST_SNAPBACK}>I guess 'cause...
- they're hard to getconstantConsistant
- they're hard to get an exact amount of spins (atleast 2.5 +)
Don't forget they are difficult to link into...
Consistent though
QUOTE (K4S @ Apr 1 2008, 09:46 AM) <{POST_SNAPBACK}>Who are some good spinners that use a variety of infinity-hybrid tricks? Thanks
Check out this vid by LMnet, there also was some other spinner who did really awesome infinitys, but I can't remember who it was... -
Date: Tue, Apr 1 2008 18:49:53QUOTE (K4S @ Apr 1 2008, 03:46 AM) <{POST_SNAPBACK}>Who are some good spinners that use a variety of infinity-hybrid tricks? Thanks
Frat, Maria (JEB), Mizm, Angmaramyeon, key3, Ankar,...
I'm sure there are more, but I can't think of any more right now. -
Date: Sun, Apr 6 2008 07:31:00
What can you use to replace a g3 cap? (if there even are any replacements
) -
Date: Sun, Apr 6 2008 14:38:12
I think hyper jell, and jimnie gel can be G3 cap subs.
-
Date: Sun, Apr 6 2008 17:37:36
didnt want to start a new thread
which has more momentum?
hybrid commsa MX
or Flexible MX
Thanks
PWiggin
edit: sry i did ask first which mod was better, but when I was going to change it to which had more momentum, iamk34n3 had already posted -
Date: Sun, Apr 6 2008 17:41:09
...Geez...There is no best mod.. its all up to your preference...
-
Date: Mon, Apr 7 2008 10:18:29
He didn't ask that, he just asked which has more momentum.
-
Date: Mon, Apr 7 2008 15:29:04QUOTE (Pwiggin34 @ Apr 6 2008, 01:37 PM) <{POST_SNAPBACK}>which has more momentum?
hybrid commsa MX
or Flexible MX
I'd say that thye are about the same momentum-wise. But if you're deciding on which to make, I'd go with HCMX because it has better grips for infinity-based tricks and is writabel on the front
-
Date: Tue, Apr 8 2008 18:55:43
I am getting conflicting responses lately when talking about the bust. Is it a fingerless index around reverse? Or is it a BakRev?
-
Date: Tue, Apr 8 2008 20:03:21
The most elaborate explanation would be:
A Fingerless Around around the lowest finger of the trick where you end. [Twisted Sonic 23-12 --> Fingerless IndexAround 12-12]
This reverses when one executes the reverse of that trick:
A Fingerless Around Reverse around the highest finger of the trick where you end. [Twisted Sonic Reverse 23-34 --> Fingerless PinkyAround Reverse 34-34. -
Date: Tue, Apr 8 2008 20:04:43
Read this post, then read this post. Notice that there is no mention of Backaround, that's because there is no Backaround performed.
-
Date: Thu, Apr 10 2008 00:13:02
I'm looking for a one-sided mod with good momentum, something that spins like a signo-tipped comssa. Anyone know of any?
-
Date: Thu, Apr 10 2008 00:15:37
How about the Comssa Momentum?
-
Date: Thu, Apr 10 2008 00:34:25QUOTE (sketching @ Apr 9 2008, 05:15 PM) <{POST_SNAPBACK}>How about the Comssa Momentum?
Whoa, never seen that before. It's pretty cool. Thanks sketching! I just need to get myself some signos this weekend and I'm all set.
EDIT
Oh, it doesn't write... I don't spin pens that don't write. :[ I'm picky I guess. -
Date: Thu, Apr 10 2008 01:02:18QUOTE (Look Into the Sun @ Apr 9 2008, 08:34 PM) <{POST_SNAPBACK}>Whoa, never seen that before. It's pretty cool. Thanks sketching! I just need to get myself some signos this weekend and I'm all set.
EDIT
Oh, it doesn't write... I don't spin pens that don't write. :[ I'm picky I guess.
How about an HCMX? http://www.upsb.info/wiki/index.php/Hybrid_Comssa_MX -
Date: Thu, Apr 10 2008 01:30:24QUOTE (k2thez @ Apr 9 2008, 06:02 PM) <{POST_SNAPBACK}>How about an HCMX? http://www.upsb.info/wiki/index.php/Hybrid_Comssa_MX
I was thinking about making an HCMX actually. How does it spin? -
Date: Thu, Apr 10 2008 01:33:31QUOTE (Look Into the Sun @ Apr 9 2008, 08:30 PM) <{POST_SNAPBACK}>I was thinking about making an HCMX actually. How does it spin?
It spins really well. It's got a good amount of momentum, has the comssa body feel, and it looks like a pen. -
Date: Thu, Apr 10 2008 01:36:11QUOTE (k2thez @ Apr 9 2008, 05:33 PM) <{POST_SNAPBACK}>It spins really well. It's got a good amount of momentum, has the comssa body feel, and it looks like a pen.
Thanks, I'll try it today.
Seems like it might spin like an MPFX though. -
Date: Thu, Apr 10 2008 03:06:29
The HCMX doesn't have the weighty feel on the ends that a Comssa Metallic has, you will have to add weight to both ends to get more of that kind of feel.
-
Date: Thu, Apr 10 2008 04:29:14QUOTE (sketching @ Apr 9 2008, 07:06 PM) <{POST_SNAPBACK}>The HCMX doesn't have the weighty feel on the ends that a Comssa Metallic has, you will have to add weight to both ends to get more of that kind of feel.
Hmm... The HCMX is quite nice although I wouldn't mind trying the Commsa Momentum. Anyway to make the comssa momentum write? -
Date: Thu, Apr 10 2008 05:39:13
You can remove the Sign Pen ink tube (like with the HCMX), punch a hole in the Sign Pen back plug, then find an ink tube from another pen (RSVP or otherwise) and stick it in. RSVP MX-like, reversed ink tube.
-
Date: Thu, Apr 10 2008 22:16:30
You can also use the method K4S came up with to use Bic ink.
-
Date: Thu, Apr 10 2008 22:52:13
Thanks. I'll try experimenting this weekend. :]
-
Date: Thu, Apr 10 2008 23:25:09
why do i suck at PS-ing?
so far all i can do are the fundamentals, a backaround, fingerless TA...and throwing the pen at my friend -
Date: Thu, Apr 10 2008 23:27:03QUOTE (jaychou @ Apr 10 2008, 05:25 PM) <{POST_SNAPBACK}>why do i suck at PS-ing?
so far all i can do are the fundamentals, a backaround, fingerless TA...and throwing the pen at my friend
everyone learns at their own rate
-
Date: Sat, Apr 12 2008 20:27:05
So I'm going to Japan in the summer. I'm looking to find Colortwins, Dr. Grips, Sailors, and any other Japanese pens. What store should I look to find them? I know Daiso has SAilors already.
-
Date: Sun, Apr 13 2008 02:26:19QUOTE (Tofu @ Apr 12 2008, 01:27 PM) <{POST_SNAPBACK}>So I'm going to Japan in the summer. I'm looking to find Colortwins, Dr. Grips, Sailors, and any other Japanese pens. What store should I look to find them? I know Daiso has SAilors already.
There are Daisos in the US. Pretty sure you can find Dr. Grips and CTs(?) in the US too.
Oh, and another question:
A figure 8 is mini-combo consisting of a wiper and wiper rev. So...if I did a figure 8 in reverse, what type of wipers would that be? -
Date: Sun, Apr 13 2008 03:07:25QUOTE (Look Into the Sun @ Apr 12 2008, 09:26 PM) <{POST_SNAPBACK}>There are Daisos in the US. Pretty sure you can find Dr. Grips and CTs(?) in the US too.
Oh, and another question:
A figure 8 is mini-combo consisting of a wiper and wiper rev. So...if I did a figure 8 in reverse, what type of wipers would that be?
Wouldn't it just be Wiper rev and wiper? -
Date: Sun, Apr 13 2008 12:30:28
What is spica.net?
-
Date: Sun, Apr 13 2008 18:19:46
kinda like mySpace but for pen spinners only.
-
Date: Tue, Apr 15 2008 01:27:48QUOTE (Look Into the Sun @ Apr 12 2008, 07:26 PM) <{POST_SNAPBACK}>There are Daisos in the US. Pretty sure you can find Dr. Grips and CTs(?) in the US too.
Oh, and another question:
A figure 8 is mini-combo consisting of a wiper and wiper rev. So...if I did a figure 8 in reverse, what type of wipers would that be?
Yes, I know about the Daiso's in US and I can get Dr. Grips here too, but my parents are letting me go on a shoppping spree when we get there. xD If CT's are in US, where can they be found? O.o -
Date: Tue, Apr 15 2008 05:46:01
What mod does O2 use in FPSB + JEB (same one as in MaKiN 1st)?
-
Date: Thu, Apr 17 2008 05:36:36
Does anybody have a picture of Ayatori's original Lakubo Jell mod, with his grip cut design
-
Date: Fri, Apr 18 2008 20:16:37QUOTE (Tofu @ Apr 14 2008, 09:27 PM) <{POST_SNAPBACK}>If CT's are in US, where can they be found? O.o
They are usually found in random Japanese stores. I found some cartoon Color Twins in this Japanese store in the mall near me. -
Date: Fri, Apr 18 2008 20:21:53
Not sure if this is the right place to ask this, but...
Can anyone link me to the G3 MX tut? -
Date: Fri, Apr 18 2008 20:42:35QUOTE (nolan @ Apr 18 2008, 03:21 PM) <{POST_SNAPBACK}>Not sure if this is the right place to ask this, but...
Can anyone link me to the G3 MX tut?
G3 MX by WhatTheHell -
Date: Sat, Apr 19 2008 00:45:48
difference between backaround and korean backaround?
-
Date: Sat, Apr 19 2008 00:49:56QUOTE (asian pen @ Apr 18 2008, 08:45 PM) <{POST_SNAPBACK}>difference between backaround and korean backaround?
Weis backaround(the regular backaround) spins around your knuckle. Korean backaround aka Fingerless indexaround reverse, spins around the first joint on your finger. -
Date: Sat, Apr 19 2008 14:10:05QUOTE (k2thez @ Apr 18 2008, 08:49 PM) <{POST_SNAPBACK}>Weis backaround(the regular backaround) spins around your knuckle. Korean backaround aka Fingerless indexaround reverse, spins around the first joint on your finger.
kk, ty. i thought it was something like that, -
Date: Sun, Apr 20 2008 01:23:32
?????????
i plan to spin in class.
at my school we don't use pens so i wanna know a good MP for spinning. -
Date: Sun, Apr 20 2008 01:28:11
MPFX, M-301 X, Anything that K4S made that is a shaker... really, u have to test them first for what kind u want.
-
Date: Sun, Apr 20 2008 01:28:52
spinmatic!!!!
-
Date: Sun, Apr 20 2008 03:43:27
yea, i agree. either an mpfx, m-301x or my mod, g-fx. i personally use a dr. grip shaker in class and occasionally my mpfx but its all up to you
-
Date: Sun, Apr 20 2008 03:51:16
MP RSVP MX!
-
Date: Sun, Apr 20 2008 03:54:14
mp msxa =D
-
Date: Mon, Apr 21 2008 00:24:08
Is this Sunburst the same as the green RSVP? They look very different.
Spoiler:
Spoiler: -
Date: Mon, Apr 21 2008 00:30:59
that's cause that's an MX
-
Date: Mon, Apr 21 2008 00:39:32
I'm asking if that Sunburst is the is used in the MX. Because I cannot find a RSVP of that colour anywhere.
-
Date: Mon, Apr 21 2008 00:52:47QUOTE (Hellblaza @ Apr 20 2008, 07:39 PM) <{POST_SNAPBACK}>I'm asking if that Sunburst is the is used in the MX. Because I cannot find a RSVP of that colour anywhere.
Yes, that light green sunburst is used in that MX. Only the light green sunburst has that color. -
Date: Mon, Apr 21 2008 00:57:29
I see. Why do they look completely different then?
-
Date: Mon, Apr 21 2008 00:59:35
Probably because Penwish got a picture that makes the light green sunburst look darker.
-
Date: Wed, Apr 23 2008 09:13:46
is a dr.kt actually 20cms long, cause when i push the caps in as much as possible mines 20.5cm long.
-
Date: Wed, Apr 23 2008 11:14:21
i want to mod a new pen but i cant find led pens . i need your help!!!! if you can find grips that can lighting at night time or luminous are much better .
-
Date: Thu, May 1 2008 07:16:40
When Pendolsa 1st was released? xD
(Day/Month/Year) -
Date: Thu, May 1 2008 07:29:47QUOTE (yam @ Apr 23 2008, 03:13 AM) <{POST_SNAPBACK}>is a dr.kt actually 20cms long, cause when i push the caps in as much as possible mines 20.5cm long.
mine was 20 cm but i soldered off the tips. -
Date: Sun, May 4 2008 15:10:16
How do I link tricks together smoothly without having to reposition my pen?
-
Date: Mon, May 5 2008 15:23:50
@Noob: Practice until your fingers get used to moving the pen from that position.
-
Date: Sat, May 17 2008 02:00:25
How does a GJH spin?
How does a retractable MX (monami mechanism) spin? Is the insert interchange-able easily? -
Date: Sat, May 17 2008 02:17:21QUOTE (Look Into the Sun @ May 16 2008, 10:00 PM) <{POST_SNAPBACK}>How does a GJH spin?
How does a retractable MX (monami mechanism) spin? Is the insert interchange-able easily?
A GJH actually spins very well. It's quite short though, about the length of a G3 MX. It is heavier than an MX and has good momentum.
-
Date: Sat, May 17 2008 02:34:38QUOTE (k2thez @ May 16 2008, 06:17 PM) <{POST_SNAPBACK}>A GJH actually spins very well. It's quite short though, about the length of a G3 MX. It is heavier than an MX and has good momentum.
How big is a g3 mx? Bigger than a normal mx or smaller? -
Date: Sat, May 17 2008 02:37:09
The G3 MX is about 17.5 centimeters long, and that is about 1 centimeter shorter than an MX.
-
Date: Sat, May 17 2008 03:07:01QUOTE (k2thez @ May 16 2008, 06:37 PM) <{POST_SNAPBACK}>The G3 MX is about 17.5 centimeters long, and that is about 1 centimeter shorter than an MX.
Damn. :[
I wanted something longer than the MX, but a bit heavier. Stupid big hands. I'm gonna try playing with the HCMX later.
So, MX or GJH? -
Date: Sat, May 17 2008 19:15:18QUOTE (Look Into the Sun @ May 16 2008, 10:07 PM) <{POST_SNAPBACK}>Damn. :[
I wanted something longer than the MX, but a bit heavier. Stupid big hands. I'm gonna try playing with the HCMX later.
So, MX or GJH?
MX > GJH with 0.5 lead
MX ≥ GJH with 0.7 lead
The GJH with 0.5 lead breaks really easily so you can't write with it. The GJH with 0.7 lead works fine and spins very well. Overall the MX is very slightly better but the GJH is still a great thing to spin. -
Date: Sat, May 17 2008 19:19:25
tips on ringbak please..keeps getting stuck or not moving at all
-
Date: Sat, May 17 2008 20:04:25QUOTE (k2thez @ May 17 2008, 11:15 AM) <{POST_SNAPBACK}>MX > GJH with 0.5 lead
MX ≥ GJH with 0.7 lead
The GJH with 0.5 lead breaks really easily so you can't write with it. The GJH with 0.7 lead works fine and spins very well. Overall the MX is very slightly better but the GJH is still a great thing to spin.
Thanks a bunch. Seems like I'm still going to be on the lookout for the perfect pen. -
Date: Wed, Jun 11 2008 13:57:24
umm, I'd like some reviews about the Ayatori mod befor I (try to) make one or buy one..
how is it in terms of spinnability (probably spelled wrong, lol) ? I heard that the spinning space is quite smaller, is it true? and does it bother you?
also, I'd like to know how heavy is it.. compared to others mods and such..
oh, and last last thing, does it write? X:
I'll be glad if someone could answer those questions, or at least some of them ^^" -
Date: Wed, Jun 11 2008 14:15:24
I'd say that the ayatori mod spins pretty well. Even though it has only a signo tip on both ends it does feel pretty heavy when spun (not KT heavy, but considerably more than a comssa metallic or a MSXA)
The cut grip on the fron can feel a little bit weird when doing infinity-based tricks, bit you can get used to it pretty easily.
Overall I'd say it spins pretty well, the spinning space isn't much less than an MX, and it looks sexy
-
Date: Wed, Jun 11 2008 15:10:34
thanks for the quick reply ^^
my only concern right now is if it'll be too heavy for me, because I don't like heavy mods.. I don't guess there is a way of making it lighter, right? X:
oh, and, does it write or not? ^^" -
Date: Wed, Jun 11 2008 17:52:36
You could remove the signo tip and the back. And if I remember correctly, it writes out of the back like an MX.
-
Date: Wed, Jun 11 2008 18:33:30
I guess you could replace the signo tips with HGG tips instead. that would still work and make it lighter.
The backcap with the jimnie/hyperjell grip inside actually fits on very tightly on the Lakubo body. And if you use an insert in the cap, removing it will mean that you need to re-align the insert everytime..
The original mod does not say to reverse the inktube, and I think its because of the tight fitting cap on the back -
Date: Wed, Jun 11 2008 18:55:03
oh well.... it's too damn sexy not to be made, so I guess I'll make it anyway, even if it doesn't write ^^"
but wait, if I won't use an insert in the cap I'll probably could get it to write normally, without problem?
sorry if I bother you much ^^"" -
Date: Wed, Jun 11 2008 19:51:01
Yeah, you could, but the cap on the back is still tight, and it can be kind of a pain to take off and put back on. Try it out, maybe it wont be too annoying for you
-
Date: Fri, Jun 13 2008 05:07:14
For those of you that remember the PS promo vids made by buuuuuung (his account got closed), there was #15 at 2:24. It's a white guy who does a stall trick then puts the pen in his mouth then drops the pen into his shirt. Anybody know who that is?
I'm thinking it may be Phya, but I could be wrong.
DL: http://www.mediafire.com/?ojse5fxhp4z -
Date: Fri, Jun 13 2008 08:16:58QUOTE (Eso @ Jun 13 2008, 12:07 AM) <{POST_SNAPBACK}>For those of you that remember the PS promo vids made by buuuuuung (his account got closed), there was #15 at 2:24. It's a white guy who does a stall trick then puts the pen in his mouth then drops the pen into his shirt. Anybody know who that is?
I'm thinking it may be Phya, but I could be wrong.
DL: http://www.mediafire.com/?ojse5fxhp4z
Yes, that is Phya. If one is to watch the video 'Evolution' by Phya you will see clearly that it is indeed him.
That video seems to be made up of clips taken from other people's own videos? I certainly recall seeing nhk_9 doing that very same combo at the end of one of his Troposphere promos, the three ball juggling is taken from a Chris Bliss video and I believe even that clip of Phya was not made for this collaboration. -
Date: Mon, Jun 16 2008 21:30:38
.gif)
When making the Hybrid Comssa MX (HCMX) from Trogz, in step 2 on the tutorial from the wiki, what is the easiest way to hollow out the comssa cap so the hgg ink can fit? -
Date: Mon, Jun 16 2008 21:37:22
Once you've cut off the tip of the comssa, if you have an x-acto knife just stick it in there and turn it until the ink fits. If you don't have an x-acto knife, a regular pocket knife works, or maybe small scissors, small sharp tools work well.
-
Date: Thu, Jun 19 2008 03:07:39
i started spinning this year. i using a normal pen (pilot G2) than i make a pen mods (my custom mods) yesterday. i find it heavy and my fingers have no pain, no numb but a bit stiff.
Should i stop using the new pen or just that my finger is trying adapting to the pen?? -
Date: Thu, Jun 19 2008 07:08:13
if you like the pen, keep spinning it. if you don't. stop.
-
Date: Thu, Jun 19 2008 21:11:06QUOTE (iiSociiety @ Jun 18 2008, 08:07 PM) <{POST_SNAPBACK}>i started spinning this year. i using a normal pen (pilot G2) than i make a pen mods (my custom mods) yesterday. i find it heavy and my fingers have no pain, no numb but a bit stiff.
Should i stop using the new pen or just that my finger is trying adapting to the pen??
Yeah, just rest it. Don't over do it. -
Date: Sat, Jun 21 2008 05:32:02
for shadow rise (or is it shadow riser?), how and when do u release the pen?
-
Date: Sat, Jun 21 2008 15:45:32QUOTE (B3ndythumbs @ Jun 20 2008, 10:32 PM) <{POST_SNAPBACK}>for shadow rise (or is it shadow riser?), how and when do u release the pen?
It's a Shadow Riser, that's the aerial trick. Shadow Rise is Shadow 34-23 > Shadow 23-12.
Shadow Riser is done by doing a normal shadow. Once it starts rotating on top of the fingers, you move your hand up quickly -- you sort of jerk it up and it should rise into the air. Catch as you would a TA Release. -
Date: Sun, Jun 22 2008 02:58:45
wut is the diff between devil's sonic and devil's around and devil's shadow???
-
Date: Sun, Jun 22 2008 03:32:58
Did you check the wiki yet? It shows the breakdown of the hyrbids and videos. Anyways here's the breakdown for each of them.
Devil's Sonic:
* Charge Normal 23 ~ Pass Reverse 23-12 ~ Shadow Normal 12-12
* Twisted Sonic Normal 23-12 ~ Shadow Normal 12-12
Devil's Around:
* Charge Normal 23 ~ Pass Reverse 23-12 ~ Shadow Normal 12-23
* Twisted Sonic Normal 23-12 ~ Shadow Normal 12-23
* Charge Normal 23 ~> Middlearound Normal 23-23
Devil's Shadow:
* Shadow Normal 1.0 12-23 ~ Fingerless Middlearound Normal 0.5 23-12 ~ Charge Normal 0.5 12
* Charge Normal 0.5 12 ~ {Fingerless Middlearound Normal 12-12} >
* Charge Normal 0.5 12 ~ Fingerless Middlearound Normal 12-12 ~ Charge Normal 0.5 12 -
Date: Sun, Jun 22 2008 04:46:39
How do people connect double sided rsvp vortex ???
-
Date: Sun, Jun 22 2008 06:59:05
Are you talking about the single body or the regular vortex? For the single body, you stick a cut section of the RSVP into the back of another. For the regular vortex, you connect them using a g2 inktube.
-
Date: Sat, Jul 12 2008 03:55:47
what country do people from KCF come from?
-
Date: Sat, Jul 12 2008 03:59:03QUOTE (Aiyah @ Jul 11 2008, 08:55 PM) <{POST_SNAPBACK}>what country do people from KCF come from?
Hong Kong, I believe. -
Date: Sat, Jul 12 2008 05:47:26
yes it is Hong Kong.
TWPS: Taiwan
KCF: Hong Kong
Penzone: Hong Kong
Pserhome: Mainland China
just for clarity -
Date: Sat, Jul 12 2008 06:26:40
okay, thanks
i knew it was either hong kong or taiwan, since it was written in traditional chinese -
Date: Sun, Jul 13 2008 17:54:54
Is there anyone who has done pen spinning synched with music? Ive heard the idea before.
-
Date: Sun, Jul 13 2008 17:58:56
As far as I know, there has never been a combo synched exactly to the music, only editing effects where combos have had parts fit in with the music (air trick on a crash cymbal for example).
There has been some recent discussion about this in the Research Dept. I think there will be some synch pen spinning later this summer. Certainly It's something I'm hoping to work on after my battles and Evolution. Perhaps someone will do some for the Evolution video? -
Date: Sun, Jul 13 2008 17:59:37QUOTE (Kris @ Jul 13 2008, 01:54 PM) <{POST_SNAPBACK}>Is there anyone who has done pen spinning synched with music? Ive heard the idea before.
Yeah. I think TEK and Scott Shaputis made videos that were synched to music. There are plenty other videos out there that have the same idea but I can't think of them at this moment. -
Date: Sun, Jul 13 2008 18:02:24QUOTE (Kris @ Jul 13 2008, 01:54 PM) <{POST_SNAPBACK}>Is there anyone who has done pen spinning synched with music? Ive heard the idea before.
Mats wrote an article about it in the Fingerless magazine. -
Date: Mon, Jul 14 2008 21:15:46
Does anyone know how to make a ballsign writable wihtout messing up the balance?
-
Date: Fri, Jul 18 2008 17:43:38
does red and blue beifa exist? where are they available to buy?
wanna trade with me? xD -
Date: Fri, Jul 18 2008 20:51:25
Dark blue beifas exist if I remember correctly. But I haven't seen red yet.
-
Date: Sun, Jul 20 2008 00:31:39
What`s a collab that has a spinner`s nickname in its title (Meteor 2nd)? And why is Eso so cool?
-
Date: Sun, Jul 20 2008 02:41:10
cuz he can slam revolving doors.
question:
are there different sizes to ball sign? -
Date: Sun, Jul 20 2008 11:28:30QUOTE (Kris @ Jul 20 2008, 02:31 AM) <{POST_SNAPBACK}>What`s a collab that has a spinner`s nickname in its title (Meteor 2nd)?
A collab with a spinners nickname in its title is just to show who has organized it.QUOTE (000zero0000 @ Jul 20 2008, 04:41 AM) <{POST_SNAPBACK}>question:
are there different sizes to ball sign?
As in 0.5, 0.7, 1.0 etc no, and neither in size of the pen itself. It does come with different inks though, like this 3D effect ink that gets all fluffy when you heat it, or the ink that's all glazy. How broad the tips are is thus different on these pens, but that doesn't matter when it comes to making Ballsign Mods of them. -
Date: Mon, Jul 28 2008 11:14:33
who created rsvp mx mod??..i still don't know who the creator of that mod untill today..
-
Date: Mon, Jul 28 2008 11:25:49
Kam invented it, a looong time ago. -
Date: Thu, Jul 31 2008 00:40:43QUOTE (Fuco @ Jul 18 2008, 01:43 PM) <{POST_SNAPBACK}>does red and blue beifa exist? where are they available to buy?
wanna trade with me? xD
I have red and blue beifas. The blue is dark as someone else said, and the red is like a maroon color unfortunately.
-
Date: Fri, Aug 1 2008 18:04:36
can someone tell me what the difference is between bonkura kt and a normal kt? i think its that a kt (normal) uses a keyito (or however its spelled) and a bonkura uses m&ms. also, isnt a dr ct a bonkura kt modification?
-
Date: Fri, Aug 1 2008 18:13:13QUOTE (blank @ Aug 1 2008, 11:04 AM) <{POST_SNAPBACK}>can someone tell me what the difference is between bonkura kt and a normal kt? i think its that a kt (normal) uses a keyito (or however its spelled) and a bonkura uses m&ms. also, isnt a dr ct a bonkura kt modification?
you just answered your question except bonkura kt is dr. grip grip and colortwin body
-
Date: Fri, Aug 1 2008 20:04:17
can someone please tell me the stats for SEVEN's mod and Key3 mod? (length, weigth, cog, and such..)
-
Date: Sun, Aug 3 2008 02:40:57
What's a decent tapliclip sub? I'm trying to make a key3 mod.
-
Date: Sun, Aug 3 2008 03:15:31
I think Sarasa has the same grip.
-
Date: Sun, Aug 10 2008 10:41:05
What is the difference between japanese and french Dr. Grip pencils?
-
Date: Sun, Aug 10 2008 13:35:11QUOTE (Fuco @ Aug 10 2008, 06:41 AM) <{POST_SNAPBACK}>What is the difference between japanese and french Dr. Grip pencils?
The tip weights re essentially the same, and the outter shape is identical. If you look inside the big opening on the back end of the tip, the ones sold in france have a beveled edge, and the ones from japan are flat.
It really doesn't make a difference if you're making a KT. -
Date: Thu, Aug 14 2008 02:42:57
hi to all!
im a new member of this forum...
i have some questions to ask since im a noob in pen spinning world..
1. what upsb stand for?
2. how long is the best pen to use in pen spinning?
thats all..thank you in advance! -
Date: Thu, Aug 14 2008 02:44:46QUOTE (wyrlo @ Aug 13 2008, 10:42 PM) <{POST_SNAPBACK}>hi to all!
im a new member of this forum...
i have some questions to ask since im a noob in pen spinning world..
1. what upsb stand for?
2. how long is the best pen to use in pen spinning?
thats all..thank you in advance!
1) check the wiki
2) there's no "best pen" and length is usually around 19-23cm -
Date: Tue, Aug 19 2008 21:05:18QUOTE (wyrlo @ Aug 13 2008, 07:42 PM) <{POST_SNAPBACK}>hi to all!
im a new member of this forum...
i have some questions to ask since im a noob in pen spinning world..
1. what upsb stand for?
2. how long is the best pen to use in pen spinning?
thats all..thank you in advance!
1. Universal Pen Spinning Board
2. personal preference -
Date: Sat, Aug 23 2008 09:21:18
Are Bics the same as papermate kilometricos?
Does a thread ever gets removed due to inactivity or will it just stay here forever and get pushed down? -
Date: Sat, Aug 23 2008 09:37:40QUOTE (Glamouraz @ Aug 23 2008, 02:21 AM) <{POST_SNAPBACK}>Are Bics the same as papermate kilometricos?
Does a thread ever gets removed due to inactivity or will it just stay here forever and get pushed down?
No they are very different. Bic's have a different feeling surface on the cap and the body...in addition the KM has a surface on its cap that is the same as its body's surface.
It is impossible to make a bictory with a KM because there is no actual backplug.
The back of a KM is just plastic. Look at the difference.
And I don't think they get removed...if you look at the last pages of the topic lists in a category...the threads from when UPSB v3 opened are still there. -
Date: Mon, Aug 25 2008 12:05:38
Cool thanks. What does MX stand for? As in like.. RSVP MX or... Momentum MX or Impact MX.. what does MX stand for?
-
Date: Mon, Aug 25 2008 12:22:39
RSVP MaXimum I believe
-
Date: Thu, Aug 28 2008 12:08:11
Cool.. thanks!
How do you use sugar to remove drawings on cartoon comssa body? -
Date: Thu, Aug 28 2008 14:41:26QUOTE (Glamouraz @ Aug 28 2008, 08:08 AM) <{POST_SNAPBACK}>Cool.. thanks!
How do you use sugar to remove drawings on cartoon comssa body?
You basically just rub it on the barrel. But I'll advise you not to use sugar because it can leave scratch marks on the barrel.
Try using Nail Polish Remover or fold a piece of plain computer paper until its it small and rub the edge on the barrel (probably the easiest way). -
Date: Thu, Aug 28 2008 19:41:01QUOTE (Outlander @ Aug 28 2008, 10:41 AM) <{POST_SNAPBACK}>You basically just rub it on the barrel. But I'll advise you not to use sugar because it can leave scratch marks on the barrel.
Try using Nail Polish Remover or fold a piece of plain computer paper until its it small and rub the edge on the barrel (probably the easiest way).
Alcohol works too. -
Date: Fri, Aug 29 2008 07:11:36
Are there any RSVP cap subs? With similar weight and length. Cheers
-
Date: Fri, Aug 29 2008 16:44:42QUOTE (renwickftw @ Aug 29 2008, 03:11 AM) <{POST_SNAPBACK}>Are there any RSVP cap subs? With similar weight and length. Cheers
Hyper jell, Jimnie jell, and G3 caps are similar in length and weight. They're a tiny bit wider than RSVP caps so they fit on the RSVP back but need a little bit of tape to keep it stable. -
Date: Sat, Aug 30 2008 05:26:56
Thanks at k2thez.
And Cybrax that wasnt funny. -
Date: Sat, Aug 30 2008 07:57:12
Are cartoon comssas the same as the normal comssa except with cartoons?
Cause i've seen the normal comssas and the cartoon ones in pack of 10 and they look kinda different. Especially the shape of their caps.
Am i seeing it wrongly? Are they the same? Thanks! -
Date: Sat, Aug 30 2008 15:38:08QUOTE (Glamouraz @ Aug 30 2008, 03:57 AM) <{POST_SNAPBACK}>Are cartoon comssas the same as the normal comssa except with cartoons?
Cause i've seen the normal comssas and the cartoon ones in pack of 10 and they look kinda different. Especially the shape of their caps.
Am i seeing it wrongly? Are they the same? Thanks!
Cartoon comssas are basically the same as normal comssas. The caps are generally the same except that the cartoon comssas have colored caps.
You could be right about the caps being different because there's loads of different cartoon comssas and knock off brands. -
Date: Sun, Aug 31 2008 15:51:45
What does "Pendolsa" mean?
-
Date: Sun, Aug 31 2008 16:40:54
Pendolsa is an acronym for "pen ul dol ri nun sa ram dul" which means "people that spin pens"
-
Date: Sun, Aug 31 2008 17:00:24QUOTE (Eso @ Aug 31 2008, 12:40 PM) <{POST_SNAPBACK}>Pendolsa is an acronym for "pen ul dol ri nun sa ram dul" which means "people that spin pens"
What language is that in? Korean?
Yes -
Date: Tue, Sep 2 2008 03:45:57
Can colourtwin caps fit on the back of RSVPs like th M&M ones do?
What pens have the same caps?
Thanks! -
Date: Tue, Sep 2 2008 04:53:45QUOTE (Glamouraz @ Sep 1 2008, 11:45 PM) <{POST_SNAPBACK}>Can colourtwin caps fit on the back of RSVPs like th M&M ones do?
Yes.QUOTE (Glamouraz @ Sep 1 2008, 11:45 PM) <{POST_SNAPBACK}>What pens have the same caps?
Colortwin, Miffy & Melenie, and KeiTyo. -
Date: Tue, Sep 2 2008 09:55:37
What's a good school mod/pen? Preferably longer and heavier than a RSVP.
-
Date: Tue, Sep 2 2008 09:59:35
msxa? you don't really carry around something heavier than RSVP because most likely that pen is more expensive.
-
Date: Tue, Sep 2 2008 09:59:35
try one of those MP MX or the retractable comssa by K4S.
-
Date: Wed, Sep 3 2008 17:48:24
gjh is good but its a bit more expensive to make
-
Date: Wed, Sep 3 2008 21:21:48
Why Mr LSC doesn't make any other pds comssa v1-v6?
-
Date: Wed, Sep 3 2008 23:38:31QUOTE (spinforlife @ Sep 3 2008, 05:21 PM) <{POST_SNAPBACK}>Why Mr LSC doesn't make any other pds comssa v1-v6?
At a time, he did.
However production was stopped.
Kind of like cars. -
Date: Thu, Sep 4 2008 00:20:59
are keityos, colortwins, persons, and pentel color the exact same with different color barrels and stuff?
-
Date: Thu, Sep 4 2008 00:25:33QUOTE (Aiyah @ Sep 3 2008, 08:20 PM) <{POST_SNAPBACK}>are keityos, colortwins, persons, and pentel color the exact same with different color barrels and stuff?
God. For the last fucking time, yes. -
Date: Thu, Sep 4 2008 00:28:19
For making Ayatori mod, do u remove the lakubo grip?
-
Date: Thu, Sep 4 2008 01:22:58QUOTE (CPM8 @ Sep 3 2008, 08:28 PM) <{POST_SNAPBACK}>For making Ayatori mod, do u remove the lakubo grip?
No you don't remove the lakubo grip. The signo knock type grip goes over the lakubo grip. -
Date: Thu, Sep 4 2008 11:56:35
is there any other ways of making an outsert other than the way mentioned in this video?
http://www.youtube.com/watch?v=3PaNDeEijsg...feature=related
What are comssas v1, v2... etc? -
Date: Thu, Sep 4 2008 12:21:06
v1 v2 are version1 version2. it was sold in PDS many years ago and now they don't sell them anymore making them rare.
-
Date: Thu, Sep 4 2008 14:12:10
So what's the difference between a normal comssa mod and the comssa v1, v2... v12?
-
Date: Thu, Sep 4 2008 14:40:02QUOTE (Glamouraz @ Sep 4 2008, 10:12 AM) <{POST_SNAPBACK}>So what's the difference between a normal comssa mod and the comssa v1, v2... v12?
A normal Comssa is just a black barrel, sometimes with the original manufacturer's logo printed on the barrel. However, the PDS Comssa v1-3, I believe, have a special Pendolsa logo printed onto the barrel. The remaining versions have stickers stuck onto the barrel. Some of the versions even feature different colored caps, such as black and blue. That's the only difference. -
Date: Sun, Sep 7 2008 07:44:34
oi, sorry ._.
what are hgg k116 and how are they different from normal hggs? -
Date: Sun, Sep 7 2008 08:28:37
They're not different, K116 is the model number
-
Date: Sun, Sep 7 2008 08:39:45
haha, i was actually of thinking of answering that question
but their are different model numbers like k118(pastel?) or somehting like that -
Date: Mon, Sep 8 2008 06:30:14QUOTE (Eso @ Sep 4 2008, 09:40 AM) <{POST_SNAPBACK}>A normal Comssa is just a black barrel, sometimes with the original manufacturer's logo printed on the barrel. However, the PDS Comssa v1-3, I believe, have a special Pendolsa logo printed onto the barrel. The remaining versions have stickers stuck onto the barrel. Some of the versions even feature different colored caps, such as black and blue. That's the only difference.
Its actually v.1-v.5
v.6 is when he started to use the outserts. -
Date: Mon, Sep 8 2008 06:54:34
Cool thanks.
What're the dimensions for an ayatori insert and how do you measure it and print it out with the correct measurements? What's DPI and how does it affect the measurements? thanks! -
Date: Thu, Sep 11 2008 21:02:59
in which country (countries) person's pens are available to buy?
edit: and about how much ($) is it worth? -
Date: Thu, Sep 11 2008 21:45:15
How long has kUzu been spinning?
-
Date: Fri, Sep 12 2008 15:53:27QUOTE (Fuco @ Sep 11 2008, 09:02 PM) <{POST_SNAPBACK}>in which country (countries) person's pens are available to buy?
edit: and about how much ($) is it worth?
Some people on JEB found person's pens in Japan so far by accident, however they are already extremely rare pens, so it's difficult to get them anywhere. I don't know how much they cost or they are worth, by the way.QUOTE (Xero @ Sep 11 2008, 09:45 PM) <{POST_SNAPBACK}>How long has kUzu been spinning?
Although I don't know how long exactly he's been spinning, he registered with JEB v1 on Oct 3 2006.
http://penspinning.jp.land.to/phpBB2/profi...file&u=1799 -
Date: Fri, Sep 12 2008 17:06:53QUOTE (Aphsamoth @ Sep 12 2008, 11:53 AM) <{POST_SNAPBACK}>Although I don't know how long exactly he's been spinning, he registered with JEB v1 on Oct 3 2006.
http://penspinning.jp.land.to/phpBB2/profi...file&u=1799
Okay, thanks.
-
Date: Fri, Sep 12 2008 23:01:57
Huh since on the subject of JEB spinners I would like to know how long Key3 and NIKoo have been spinning.
-
Date: Fri, Sep 12 2008 23:13:02QUOTE (sangara @ Sep 12 2008, 04:01 PM) <{POST_SNAPBACK}>Huh since on the subject of JEB spinners I would like to know how long Key3 and NIKoo have been spinning.
And Saizen and Seven. And Pesp. -
Date: Sat, Sep 13 2008 02:33:31
anyone still have that link to the video of that guy spinning the bic christal really poorly? he was wearing a black sweatshirt that said "got 1337?" on it.
-
Date: Sat, Sep 13 2008 02:36:18
Are you talking about Spinnin' to 50? hahahahahhahaha
-
Date: Sat, Sep 13 2008 04:30:25QUOTE (sangara @ Sep 12 2008, 11:01 PM) <{POST_SNAPBACK}>Huh since on the subject of JEB spinners I would like to know how long Key3 and NIKoo have been spinning.QUOTE (Look Into the Sun @ Sep 12 2008, 11:13 PM) <{POST_SNAPBACK}>And Saizen and Seven. And Pesp.
I still don't know how long exactly.....
Okay, I made a short research on when some Japanese spinners registerd with JEB v1
Name | JEB v1 Registration Date
key3 | Jan 10 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=147 )
NIKoo | Nov 20 2006 ( http://penspinning.jp.land.to/phpBB2/profi...file&u=2062 )
Saizen | Apr 16 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=501 )
SEVEN | Apr 29 2007 ( http://penspinning.jp.land.to/phpBB2/profi...file&u=3508 )
Pesp | Mar 15 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=379 ) -
Date: Sat, Sep 13 2008 04:36:21QUOTE (Aphsamoth @ Sep 12 2008, 09:30 PM) <{POST_SNAPBACK}>I still don't know how long exactly.....
Okay, I made a short research on when some Japanese spinners registerd with JEB v1
Name | JEB v1 Registration Date
key3 | Jan 10 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=147 )
NIKoo | Nov 20 2006 ( http://penspinning.jp.land.to/phpBB2/profi...file&u=2062 )
Saizen | Apr 16 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=501 )
SEVEN | Apr 29 2007 ( http://penspinning.jp.land.to/phpBB2/profi...file&u=3508 )
Pesp | Mar 15 2006 ( http://penspinning.jp.land.to/phpBB2/profi...ofile&u=379 )
Thanks and I guess it's safe to assume they've been spinning at least 2 years. I'm betting 3. -
Date: Sat, Sep 13 2008 04:36:59QUOTE (nateiskewl @ Sep 12 2008, 07:36 PM) <{POST_SNAPBACK}>Are you talking about Spinnin' to 50? hahahahahhahaha
yeah, but i can't find the vid anywhere -
Date: Sat, Sep 13 2008 07:53:51
who's the spinner with the red and blue pen at 0:21-0:25, 1:07-1:22? (they're the same people (i think))
-
Date: Sat, Sep 13 2008 08:42:15
of what collab?
-
Date: Sun, Sep 14 2008 04:07:32
http://www.youtube.com/watch?v=CStjpxC2y_I
Who's this guy? -
Date: Sun, Sep 14 2008 17:58:55QUOTE (nateiskewl @ Sep 14 2008, 12:07 AM) <{POST_SNAPBACK}>
He's a comedian. Not sure what his name is. He was featured in that one Bonkura video for just a little while in the first part. After he did a TA release, he screamed out "don demo jaiiii" I think that's his catch phase or something. -
Date: Mon, Sep 15 2008 11:34:25QUOTE (Kari-Chan @ Sep 13 2008, 05:53 PM) <{POST_SNAPBACK}>who's the spinner with the red and blue pen at 0:21-0:25, 1:07-1:22? (they're the same people (i think))QUOTE (dust_kid @ Sep 13 2008, 06:42 PM) <{POST_SNAPBACK}>of what collab?
whoops! i was sure i put the link in ><
this collab -
Date: Mon, Sep 15 2008 12:05:18
are there caps similar to the ones in comssa other than bellcolor?
-
Date: Tue, Sep 16 2008 01:15:22
Is there a tutorial for a UK comssa? Link?
-
Date: Wed, Sep 17 2008 03:43:25QUOTE (Eso @ Sep 14 2008, 09:58 AM) <{POST_SNAPBACK}>He was featured in that one Bonkura video for just a little while in the first part. After he did a TA release, he screamed out "don demo jaiiii" I think that's his catch phase or something.
Hmm.... i thought it was "donduronchi" or something.
i'm sitll trying to figure out the meaning
But he was also the host for the other show that had bonkura in it.
What mod did SEVEN use in Saz'ect? It's some clear double sided mod...(it's obviously not SEVEN's G-3 Mod)
http://www.youtube.com/watch?v=muL3XJ4bUkU -
Date: Wed, Sep 17 2008 10:32:58QUOTE (nolan @ Sep 16 2008, 06:45 AM) <{POST_SNAPBACK}>Is there a tutorial for a UK comssa? Link?
http://www.youtube.com/watch?v=zkANxkF4Yko -
Date: Wed, Sep 17 2008 12:41:00
What colours of Beifas are known? Black, blue and dark red?
-
Date: Wed, Sep 17 2008 19:42:49QUOTE (Tvister @ Sep 17 2008, 08:41 AM) <{POST_SNAPBACK}>What colours of Beifas are known? Black, blue and dark red?
Black, blue, red(maybe, I'm not sure), yellow, light green, orange, and pink. -
Date: Thu, Sep 18 2008 20:51:23
Kari: That's G-ryzer. I think he's retired or inactive.
-
Date: Thu, Sep 18 2008 21:42:09QUOTE (k2thez @ Sep 17 2008, 02:42 PM) <{POST_SNAPBACK}>Black, blue, red(maybe, I'm not sure), yellow, light green, orange, and pink.
Actually: Beifa: Black, navy blue, dark red, dark green
ColorBeifa Sub: Orange, yellow, green, pink
I've only ever seen the dark red and dark green beifas on the company website though
@xxdefinitionxx: Maybe its some type of Extended Clear Comssa? it MIGHT even be a variation on the Saizen mod.... just what i can tell from the individual clip i stopped on. -
Date: Fri, Sep 19 2008 06:21:45QUOTE (Stevieboy7 @ Sep 18 2008, 02:42 PM) <{POST_SNAPBACK}>@xxdefinitionxx: Maybe its some type of Extended Clear Comssa? it MIGHT even be a variation on the Saizen mod.... just what i can tell from the individual clip i stopped on.
yeah i was thinking that could be it....with like the same grip pattern on each side.
because nikoo and i think scissor both also used saizen's mod. -
Date: Fri, Sep 19 2008 14:03:24
Why are some of Mr LSC's mods called science mods?
When you remove the cap from a luminous science mod, does the fluid pour out or is it contain in some kinda casing so you cant remove the fluid when you remove the caps?
Can you even remove the caps from a luminous science mod? -
Date: Fri, Sep 19 2008 14:10:36
there is no fluid. no you can't take the cap off. and he called it science simply because he wanted to.
-
Date: Fri, Sep 19 2008 16:07:15
is there ANY tutorial for a retr. MX out there? besides the monami 153 one....
if not, any idea when one will be out? lol.. -
Date: Fri, Sep 19 2008 23:13:34
theres one Tek made. i think its called mp mx.
-
Date: Sat, Sep 20 2008 01:42:30
I think he means a pen one not a MP one..
Here's a retractable flex MX by K4S: http://www.upsb.info/forum/index.php?showt...;hl=retractable
IDK if it's what you're looking for though.
I've got a question: What criteria must a mod have for it to be posted in the wiki? Or can you just post your mod in the wiki since anyone who has 20 or more posts can edit it? -
Date: Sat, Sep 20 2008 07:30:52QUOTE (WhiteFang @ Sep 20 2008, 01:13 AM) <{POST_SNAPBACK}>theres one Tek made. i think its called mp mx.
I said retr. MX, as in pen, not MP... >_<" sorry~
and Glamouraz, Thanks, but I want a real MX, not flex MX... -
Date: Sun, Sep 21 2008 12:23:16
What does a pack of Hyper Jells cost?
-
Date: Sun, Sep 21 2008 18:56:19
Can someone please give me a link to a G.J.H. tutorial? I can't seem to find it with the Search tool.
Edit: Never mind, I found it. -
Date: Mon, Sep 22 2008 21:11:32
Does anyobdy know how old are some really famous pen spinners?
For example Ayatori, Kuzu, Seven, Saizen, Banz, Key3, Eriror, s777 etc
Generally is there a age where you can't spin or you can't spin as well as you could or you can spin well untill you are too old? -
Date: Mon, Sep 22 2008 22:52:23QUOTE (spinforlife @ Sep 22 2008, 02:11 PM) <{POST_SNAPBACK}>Does anyobdy know how old are some really famous pen spinners?
For example Ayatori, Kuzu, Seven, Saizen, Banz, Key3, Eriror, s777 etc
Generally is there a age where you can't spin or you can't spin as well as you could or you can spin well untill you are too old?
I know Eriror is 16, by the way s777 looks he can't be more than 17, and I'd guess Key3 and Saizen are around 18-19, Banz is probably the oldest. As for your second question, Carpal Tunnel will kick in soon enough. -
Date: Mon, Sep 22 2008 23:57:47
Where did people get the UCPSB RSVP's? Was there a giveaway like the Bic's or something?
-
Date: Tue, Sep 23 2008 00:32:31
Eso had ordered them and sold them to people who where interest back in the UCPSB days.
-
Date: Tue, Sep 23 2008 00:41:25QUOTE (nolan @ Sep 22 2008, 08:32 PM) <{POST_SNAPBACK}>Eso had ordered them and sold them to people who where interest back in the UCPSB days.
Hm? Not UCPSB RSVPs, those were only sold on JetPens as far as I remember. The UCPSB bics were given away, people just had to pay for shipping. -
Date: Tue, Sep 23 2008 04:03:00QUOTE (k2thez @ Sep 22 2008, 05:41 PM) <{POST_SNAPBACK}>Hm? Not UCPSB RSVPs, those were only sold on JetPens as far as I remember. The UCPSB bics were given away, people just had to pay for shipping.
Ohh...Can anyone clarify on PSAJ RSVP's? Why are they so popular? -
Date: Tue, Sep 23 2008 04:52:28QUOTE (j147l @ Sep 22 2008, 09:03 PM) <{POST_SNAPBACK}>Ohh...Can anyone clarify on PSAJ RSVP's? Why are they so popular?
Because they're rare and from Japan. -
Date: Tue, Sep 23 2008 22:37:06QUOTE (sangara @ Sep 22 2008, 09:52 PM) <{POST_SNAPBACK}>Because they're rare and from Japan.
What does "PSAJ" stand for? -
Date: Tue, Sep 23 2008 22:38:13
Penspinning Association of Japan
-
Date: Wed, Sep 24 2008 07:21:46
How much Dr Grip Grip do we use for the black bonkura KT?
-
Date: Wed, Sep 24 2008 07:26:08
take a full grip and cut it in half, use half for each side. That's not written in stone though so feel free to use as much grip as you want.
-
Date: Thu, Sep 25 2008 01:25:16
How many PSAJ RSVPs exist?
-
Date: Fri, Sep 26 2008 22:58:19
how many Bonkura penz gear exist?
what is size of g3 insert?
what is size of lakubo insert?
what is size of RSVP insert? -
Date: Sat, Sep 27 2008 04:32:32
Size of RSVP insert is 8.8 cm x 3.81 cm.
Don't know the dimentions for the other pens.
Just Print out the insert at some big size (but not too big) and slowly trim it and adjust it until it fits. I think PGs are mass produced. Not sure though.
Is the science 3 luminous by pendolsa/Mr LSC's barrel uniformly round? From the pictures it looks like some kind of barrel is being used that used to have a grip in front but he removed it.
With that said, is it well balanced? -
Date: Sat, Sep 27 2008 19:46:38QUOTE (Stevieboy7 @ Sep 26 2008, 03:58 PM) <{POST_SNAPBACK}>how many Bonkura penz gear exist?
what is size of g3 insert?
what is size of lakubo insert?
what is size of RSVP insert?
I've heard that there were only 100 Bonkura PenzGear made. -
Date: Sat, Sep 27 2008 20:03:18
What's the breakdown for a flush sonic reverse?
-
Date: Sun, Sep 28 2008 02:41:56QUOTE (Glamouraz @ Sep 26 2008, 11:32 PM) <{POST_SNAPBACK}>Size of RSVP insert is 8.8 cm x 3.81 cm.
Don't know the dimentions for the other pens.
Just Print out the insert at some big size (but not too big) and slowly trim it and adjust it until it fits. I think PGs are mass produced. Not sure though.
Is the science 3 luminous by pendolsa/Mr LSC's barrel uniformly round? From the pictures it looks like some kind of barrel is being used that used to have a grip in front but he removed it.
With that said, is it well balanced?
it is a clear comssa,, made by putting a cut G2 front part on a HGG body... which gives you the line..
the body is entirely round,, and the pen spins quite nice.
and PG are mass produced but bonkura penz gear are a special editin version. -
Date: Sun, Sep 28 2008 02:46:25
@Stevieboy: I'm pretty sure it was 200 bonkura pen'z gear made, and they were handed out during the Japan Cup.
-
Date: Sun, Sep 28 2008 07:15:38
How many posts do you need to go from Member to Old Timer, Old Timer to PS Addict, PS Addict to custom title?
-
Date: Sun, Sep 28 2008 07:22:27
-
Date: Sun, Sep 28 2008 20:15:33
What is the estimated value of a PSAJ RSVP in USD?
-
Date: Sun, Sep 28 2008 20:27:07QUOTE (Glamouraz @ Sep 27 2008, 12:32 AM) <{POST_SNAPBACK}>Size of RSVP insert is 8.8 cm x 3.81 cm.
no...
the size of a rsvp insert is 8.35 x 1.905 cm
the 8.8 cm is so that it's easier to take out later on
and the 3.8 cm measurement is so that it's easier to roll up
but all that shows up is 8.35 x 1.905 of the insert -
Date: Sun, Sep 28 2008 21:16:55
How much is a 3000*f worth in USD.
-
Date: Mon, Sep 29 2008 01:17:53QUOTE (Xero @ Sep 28 2008, 03:15 PM) <{POST_SNAPBACK}>What is the estimated value of a PSAJ RSVP in USD?
Id say $15QUOTE (PenCell @ Sep 28 2008, 04:16 PM) <{POST_SNAPBACK}>How much is a 3000*f worth in USD.
Id say $20+ -
Date: Wed, Oct 1 2008 03:54:44
How much do Dr Grip and Keicho cost in Japan?
-
Date: Wed, Oct 1 2008 08:42:45QUOTE (-JC- @ Sep 29 2008, 04:27 AM) <{POST_SNAPBACK}>no...
the size of a rsvp insert is 8.35 x 1.905 cm
the 8.8 cm is so that it's easier to take out later on
and the 3.8 cm measurement is so that it's easier to roll up
but all that shows up is 8.35 x 1.905 of the insert
That's what the wiki said.. go edit it if it bugs you. -
Date: Wed, Oct 1 2008 12:50:38QUOTE (dust_kid @ Oct 1 2008, 03:54 AM) <{POST_SNAPBACK}>How much do Dr Grip and Keicho cost in Japan?
Dr. Grip: 525 yen ≈ 4.95 USD ≈ 6.21 AUD
http://www.pilot.co.jp/products/pen/sharp_...grip/index.html
Kaycho sign pen: 262 yen ≈ 2.47 USD ≈ 3.10 AUD
http://www.pentel.co.jp/fude2007/sono1_02.html -
Date: Wed, Oct 1 2008 12:57:29
Ok thanks.
WTF DR GRIP COSTS LIKE TEN BUCKS IN AUSTRALIA. -
Date: Thu, Oct 2 2008 05:36:06
What does this mean: 1p2h? I've also seen 2p2h. Can someone tell me what is stands for and what it is?
-
Date: Thu, Oct 2 2008 05:40:25QUOTE (j147l @ Oct 2 2008, 12:36 AM) <{POST_SNAPBACK}>What does this mean: 1p2h? I've also seen 2p2h. Can someone tell me what is stands for and what it is?
1p2h=1 pen 2 hands 2p2h=2 pens 2 hands
comprende? -
Date: Thu, Oct 2 2008 06:03:29QUOTE (Aries @ Oct 1 2008, 10:40 PM) <{POST_SNAPBACK}>1p2h=1 pen 2 hands 2p2h=2 pens 2 hands
comprende?
Thanks! I understand now. -
Date: Thu, Oct 2 2008 09:30:59
how to make playcolor2 mod heavier?
too light >< -
Date: Thu, Oct 2 2008 09:57:01
Screws, tips, metal stuff, sticky tak, or anything else that weighs, in the caps.
More grips on the caps.
Tips on the outside.
1-answer question?
http://www.upsb.info/forum/index.php?showtopic=199 -
Date: Thu, Oct 2 2008 10:03:18
what grips and tips can i use?
-
Date: Thu, Oct 2 2008 10:18:10
Dr Grip grip weighs pretty much so that would work fine. As for tips, I just tested HGGs and they fit in the caps. I don't think you should try to make it so much heavier though, it wouldn't really feel like a PlayColor mod then.
-
Date: Thu, Oct 2 2008 10:30:27
damn i only have signo tips. and they dont fit ><. i dont have any dr grips to spare so im trying to shove a super grip in -.-
-
Date: Thu, Oct 2 2008 10:47:19
I'm talking about having the grips on the OUTSIDE though, and any grips would work for that I guess. Anyballs also work.
-
Date: Thu, Oct 2 2008 11:35:21
i swear my pc2 is at least 25 cm now.....
-
Date: Thu, Oct 2 2008 23:18:57
What's the name of the white mod that SEVEN used in JEB tournament?
-
Date: Fri, Oct 3 2008 00:40:05
i'm guessing it's a double cap EP
-
Date: Fri, Oct 3 2008 00:44:31QUOTE (AyySoLo @ Oct 2 2008, 08:40 PM) <{POST_SNAPBACK}>i'm guessing it's a double cap EP
got a picture? -
Date: Fri, Oct 3 2008 09:30:46
Faber Castel Grip Matics have 2 types right?
I saw a metal tipped one in F1r3fly's G3 tutorial and a plastic tipped one in a bookstore here. Are they the same or are there really 2 different types of tips?
Assuming there is a metal tipped one, how much does the tip weigh without the mechanism inside?
Is there a possible sub? Cause I wanna make his mod but I think that the plastic one is the wrong one. -
Date: Mon, Oct 6 2008 14:10:18
is there any difference between japanese and french dr. grip grip?
-
Date: Mon, Oct 6 2008 15:00:39
perhaps a misplaced question, but for someone who has all three mods, which one spins the best: SEVEN's mod, Impact MX, MSXA
-
Date: Mon, Oct 6 2008 22:24:44
Anyone know what is the best length of pen for just about anyone? I know 19 cm is a pretty good length for beginners but is there any length that would be great for everyone?
-
Date: Mon, Oct 6 2008 22:29:17
Everyone has their own preferences. -
Date: Mon, Oct 6 2008 22:30:21
there is no such thing since almost everyone prefers different lengths.
unless u wanna get uber general -
Date: Mon, Oct 6 2008 23:08:49
Everyone's preference is different and there are lots of factors to consider, generally I prefer something as big as my hand is long, so about 18-19 cm
-
Date: Tue, Oct 7 2008 03:51:08
anything under 24 cm
QUOTE (sadi teh pirate @ Oct 7 2008, 02:00 AM) <{POST_SNAPBACK}>perhaps a misplaced question, but for someone who has all three mods, which one spins the best: SEVEN's mod, Impact MX, MSXA
well.. the best spinner in the world spins MSXA.. so.... yea... -
Date: Tue, Oct 7 2008 07:26:32QUOTE (Glamouraz @ Oct 3 2008, 04:30 AM) <{POST_SNAPBACK}>Faber Castel Grip Matics have 2 types right?
I saw a metal tipped one in F1r3fly's G3 tutorial and a plastic tipped one in a bookstore here. Are they the same or are there really 2 different types of tips?
Assuming there is a metal tipped one, how much does the tip weigh without the mechanism inside?
Is there a possible sub? Cause I wanna make his mod but I think that the plastic one is the wrong one.
Yes, the plastic one is the wrong one. And, yes if you did find a plastic ver. then there are 2 diff. kinds of Castel'sQUOTE (Fuco @ Oct 6 2008, 09:10 AM) <{POST_SNAPBACK}>is there any difference between japanese and french dr. grip grip?
French Dr. Grip Grip is supposedly even thinker than the Jap. ver.QUOTE (sadi teh pirate @ Oct 6 2008, 10:00 AM) <{POST_SNAPBACK}>perhaps a misplaced question, but for someone who has all three mods, which one spins the best: SEVEN's mod, Impact MX, MSXA
This is all personal preference. If you want the opinion of another spinner, seven's mod.QUOTE (Lulz @ Oct 6 2008, 05:24 PM) <{POST_SNAPBACK}>Anyone know what is the best length of pen for just about anyone? I know 19 cm is a pretty good length for beginners but is there any length that would be great for everyone?
Anything more than 21cm is usually the maximum for most spinners, unless you have big hands. -
Date: Wed, Oct 8 2008 05:37:14
Sorry if this is such a random question, but who was the very first person to join UPSB. I know Zombo was second, but who was the first?
-
Date: Wed, Oct 8 2008 06:27:58
-
Date: Thu, Oct 9 2008 05:06:19QUOTE (Aries @ Oct 7 2008, 03:26 AM) <{POST_SNAPBACK}>If you want the opinion of another spinner, seven's mod.
Yes i did, and thank you. -
Date: Fri, Oct 10 2008 15:24:59QUOTE (FrozenIce @ Oct 8 2008, 11:07 AM) <{POST_SNAPBACK}>Sorry if this is such a random question, but who was the very first person to join UPSB. I know Zombo was second, but who was the first?
Its Rockstar - Administrator. He doesn't come online much. Then Zombo, then Eriror. -
Date: Fri, Oct 10 2008 19:38:23
Please could someone tell me the name of music here?
http://uk.youtube.com/watch?v=X32_L1FDqKM
Sorry if there's a specific thread for these type of questions.
Thanks.
EDIT: It's ok, found it Thanks Turb -
Date: Sat, Oct 11 2008 18:36:12
How Long Is The G-3 Jimnie Mod?
-
Date: Wed, Oct 15 2008 03:37:31
on the ballsign with keityo caps that bonkura used what were on the ends it looks like white grip and tips
-
Date: Wed, Oct 15 2008 22:39:25
here? http://www.youtube.com/watch?v=yixXhl347cw
he put scotch tape on the caps then put dr. grip grip on top -
Date: Wed, Oct 15 2008 23:35:36
Does Penwish do anything weird to the pre-modded pens they sell? For instance, do they glue parts together? I guess the real question I'm trying to ask is: Can I disassemble a pre-modded pen from Penwish and add my own insert, or am I stuck with what they send me?
Thanks in advance. -
Date: Thu, Oct 16 2008 00:01:58
yes you can take them apart.
that or make your own mods -
Date: Thu, Oct 16 2008 00:28:10QUOTE (Samir @ Oct 15 2008, 04:35 PM) <{POST_SNAPBACK}>Does Penwish do anything weird to the pre-modded pens they sell? For instance, do they glue parts together? I guess the real question I'm trying to ask is: Can I disassemble a pre-modded pen from Penwish and add my own insert, or am I stuck with what they send me?
Thanks in advance.
No, for some pens like the RSVP MX, they superglue the HGG tip on, so it might be hard to take off unless you have superglue dissolvent or something.
And yes, the insert is removable. -
Date: Fri, Oct 24 2008 17:52:38
where can i get dr grip and M&M in tokyo japan?
-
Date: Fri, Oct 24 2008 20:37:22QUOTE (Fluctuated @ Oct 24 2008, 07:52 PM) <{POST_SNAPBACK}>where can i get dr grip and M&M in tokyo japan?
I don't know exactly about the Dr Grip, but most stationary stores I would guess. The M&Ms are pretty rare though, most people can't find them. You'll have to look around in all kind of shops for those (stationary, "toy", etc). -
Date: Sat, Oct 25 2008 14:39:48QUOTE (Sfsr @ Oct 24 2008, 04:37 PM) <{POST_SNAPBACK}>I don't know exactly about the Dr Grip, but most stationary stores I would guess. The M&Ms are pretty rare though, most people can't find them. You'll have to look around in all kind of shops for those (stationary, "toy", etc).
thanks alot for the infomation
-
Date: Wed, Oct 29 2008 00:52:43
whats the physical diffrence between M&M and Color Twin?
-
Date: Wed, Oct 29 2008 08:06:53
I have a newbie question. xD
How can I name this parts of pen?
-
Date: Wed, Oct 29 2008 09:47:38QUOTE (Sadistic @ Oct 28 2008, 08:52 PM) <{POST_SNAPBACK}>whats the physical diffrence between M&M and Color Twin?
It looks different. Otherwise, they're practically the same, with the exception that the width of the barrel, which you may feel a difference, but barely.QUOTE (SunkaZlo @ Oct 29 2008, 04:06 AM) <{POST_SNAPBACK}>I have a newbie question. xD
How can I name this parts of pen?
pic
the place where it says grip, it's supposed to say tip. Then 2=grip. 3=cap. 4=cap it's the same as 3 just from a different pen. -
Date: Wed, Oct 29 2008 11:56:42
Some Colourtwin caps dont fit on M&M completely/cleanly/etc
-
Date: Wed, Oct 29 2008 11:56:50
Am I right:
1 - cap
2 - tip
3 - grip
4 - ?
-
Date: Fri, Oct 31 2008 16:12:49
actual question .. xD
-
Date: Fri, Oct 31 2008 16:34:44
I cant really see #3 properly but it could be a grip.
#4's part of the clicker mechanism. -
Date: Tue, Nov 4 2008 13:10:45
Is there going to be World Tournament 09?
-
Date: Tue, Nov 4 2008 13:15:36
Yes.
The link to the thread is on the announcements board. -
Date: Tue, Nov 4 2008 17:41:21
Can someone please tell me what's a RSVP NMX? saw the name somewhere, but I can't seem to find any information on it...
Used the search and came up with nothing~ -
Date: Tue, Nov 4 2008 17:52:26QUOTE (Resonance @ Nov 4 2008, 09:41 AM) <{POST_SNAPBACK}>Can someone please tell me what's a RSVP NMX? saw the name somewhere, but I can't seem to find any information on it...
Used the search and came up with nothing~
It was probably a typo, or someone decided to name a personal mod that. -
Date: Tue, Nov 4 2008 18:03:15
there're only MMX and NX MMTs.
-
Date: Tue, Nov 4 2008 18:04:39QUOTE (sangara @ Nov 4 2008, 07:52 PM) <{POST_SNAPBACK}>It was probably a typo, or someone decided to name a personal mod that.
I saw it here, and wondered which mod is it...
http://www7.atpages.jp/~tokorostyle/pipipi...ojellkai_bl.png
so if anyone else knows about it, I'd be happy to know~
Thanks for the answer anyway sangara.. -
Date: Tue, Nov 4 2008 20:49:22QUOTE (Resonance @ Nov 4 2008, 01:04 PM) <{POST_SNAPBACK}>I saw it here, and wondered which mod is it...
http://www7.atpages.jp/~tokorostyle/pipipi...ojellkai_bl.png
so if anyone else knows about it, I'd be happy to know~
Thanks for the answer anyway sangara..
http://annkou2.blog105.fc2.com/blog-entry-165.html
RSVP NMX from ponkotu's blog.
It's basically an MX with an HGG tip in the back and Hi-tec c tip in the front. Not a big modification. -
Date: Tue, Nov 4 2008 21:17:14QUOTE (k2thez @ Nov 4 2008, 11:49 PM) <{POST_SNAPBACK}>http://annkou2.blog105.fc2.com/blog-entry-165.html
RSVP NMX from ponkotu's blog.
It's basically an MX with an HGG tip in the back and Hi-tec c tip in the front. Not a big modification.
So It's just a heavier MX? Lol, thanks~ -
Date: Thu, Nov 6 2008 14:00:24
How do i prevent my hands from getting too smooth?
like after i bathe or something, they get very smooth the the pen slips out of my hands easily. Any ways to prevent that? -
Date: Thu, Nov 6 2008 16:01:25QUOTE (Glamouraz @ Nov 6 2008, 09:00 AM) <{POST_SNAPBACK}>How do i prevent my hands from getting too smooth?
like after i bathe or something, they get very smooth the the pen slips out of my hands easily. Any ways to prevent that?
dry your hand first about 10 minutes and avoid spin in a room that have Air conditioning...and you ready for action.... -
Date: Fri, Nov 7 2008 13:14:45
No.. they're dry already but when you rub them together they're smooth.
-
Date: Fri, Nov 7 2008 16:22:45
Hand cream/lotion? Preferably applied while your hands are still damp.
-
Date: Fri, Nov 7 2008 16:41:43QUOTE (Sfsr @ Nov 7 2008, 06:22 PM) <{POST_SNAPBACK}>Hand cream/lotion? Preferably applied while your hands are still damp.
Works best for me... -
Date: Sat, Nov 8 2008 06:42:08
what's the difference between:
Dr. KT
Bonkura KT
Metal CT
? -
Date: Sat, Nov 8 2008 07:31:58
ok thanks sfsr.
Dr. KT is made using a Keityo body.
Bonkura KT has 2 kinds.
A black bonkura KT is made using a black colourtwin body and dr grip grips to hold the tips in place.
A white bonkura KT is made using M&M body and the most favoured colour is pink and skyblue on the sides.
I think a Metal CT uses different tips. Not sure though. -
Date: Sat, Nov 8 2008 20:55:01QUOTE (Glamouraz @ Nov 8 2008, 10:31 AM) <{POST_SNAPBACK}>ok thanks sfsr.
Dr. KT is made using a Keityo body.
Bonkura KT has 2 kinds.
A black bonkura KT is made using a black colourtwin body and dr grip grips to hold the tips in place.
A white bonkura KT is made using M&M body and the most favoured colour is pink and skyblue on the sides.
I think a Metal CT uses different tips. Not sure though.
As far as I know, a Metallic CT is just a double caped CT, with grips of choice and signo tips (I think, can probably be other tips as well..) -
Date: Mon, Nov 10 2008 06:39:27
What is this from? (yellow orange "rings")
-
Date: Mon, Nov 10 2008 06:59:35
Dimachka says he got them from some random pens in a shop and he thought they were cool and he decided to cut them up and use them lol..
-
Date: Wed, Nov 12 2008 05:13:07
where do i get / how do i make outserts?
-
Date: Wed, Nov 12 2008 10:54:06QUOTE (T-roy @ Nov 12 2008, 01:13 AM) <{POST_SNAPBACK}>where do i get / how do i make outserts?
Check the wiki or the insert thread in the pen modifications section to find inserts....which are also used for outserts. And people usually make inserts/outserts with photoshop or gimp.
edit: lol sfsr...it's what i get for answering questions at 4am .____. -
Date: Wed, Nov 12 2008 11:07:22QUOTE (T-roy @ Nov 12 2008, 06:13 AM) <{POST_SNAPBACK}>where do i get / how do i make outserts?QUOTE (K4S @ Nov 12 2008, 11:54 AM) <{POST_SNAPBACK}>Check the wiki or the insert thread in the pen modifications section to find inserts. People usually make inserts with photoshop or gimp.
Some different people have tutorials up on how to make outserts, TEK made this tutorial for example -> http://www.upsb.info/forum/index.php?showtopic=7157&hl=
If you want to make outserts like the ones PDS uses you have to get stickers printed though, which costs loads of money and you need to make at least 500 or something. -
Date: Fri, Nov 14 2008 02:33:48
what's the difference in strength with hot glue and super glue? (in holding pens together)
-
Date: Fri, Nov 14 2008 06:30:24
Are the caps used in comssa's the same as the caps used in cartoon comssa's?
-
Date: Fri, Nov 14 2008 08:01:36
If the cartoon comssa is made by dong-a, it should have the same shape but just transparent.
They're many other brands of cartoon comssa not by dong-a and they have different caps.
EDIT: @Kari-chan, i think hot glue is better cause the superglue I use is crap.. but then again, it may just be the brand that I got. -
Date: Wed, Nov 19 2008 02:56:20
anyone know what penwish uses on their comssa with hoops?
-
Date: Wed, Nov 19 2008 03:49:05
They're normal rubber rings which you can get at hardware stores I think.
. -
Date: Wed, Nov 19 2008 06:59:32
Thjey are called "O-Rings"
http://en.wikipedia.org/wiki/O-ring -
Date: Thu, Nov 20 2008 10:16:47
Out of these two what is the better mod RSVP MX or RSVP MSXA
-
Date: Thu, Nov 20 2008 14:06:58QUOTE (noobpenspinner @ Nov 20 2008, 11:16 AM) <{POST_SNAPBACK}>Out of these two what is the better mod RSVP MX or RSVP MSXA
None! It is up to you to decide which is preferable for you. The MX is slightly off-balance, at least if you use a HGG tip, but the MSXA can be too long and heavy for some people.
Try them both out, or pick the one you think looks best and stick to it. I don't think either would give you a better chance of improving at PS, they're "equally good" (no homo). -
Date: Fri, Nov 21 2008 00:28:39
What barrel is used in SEVEN's mod, a G3 or Lakubo? Or something else entirely?
Thanks in advance. -
Date: Fri, Nov 21 2008 00:46:22QUOTE (Samir @ Nov 20 2008, 07:28 PM) <{POST_SNAPBACK}>What barrel is used in SEVEN's mod, a G3 or Lakubo? Or something else entirely?
Thanks in advance.
SEVEN mod uses a G3 body. -
Date: Fri, Dec 12 2008 14:59:47
do comssa caps fit on ballsign/gelly roll body?
-
Date: Fri, Dec 12 2008 20:01:52QUOTE (Fuco @ Dec 12 2008, 09:59 AM) <{POST_SNAPBACK}>do comssa caps fit on ballsign/gelly roll body?
Yeah, I'm pretty sure they fit perfectly, just like keityo/colortwin/M&M caps. -
Date: Sat, Jan 10 2009 08:17:05
What insert is used in this pen? (Link to the insert)
-
Date: Sat, Jan 10 2009 08:26:15
is there a sub for the Hyper jell aside from the jimnie?
-
Date: Sat, Jan 10 2009 10:03:03QUOTE (Fuco @ Dec 12 2008, 06:59 AM) <{POST_SNAPBACK}>do comssa caps fit on ballsign/gelly roll body?
Jam the caps on far, or put some tape on the front of the gelly rolll bodyQUOTE (Outsmash @ Jan 10 2009, 12:17 AM) <{POST_SNAPBACK}>What insert is used in this pen? (Link to the insert)
I think it's a personal insert, not releasedQUOTE (G10 @ Jan 10 2009, 12:26 AM) <{POST_SNAPBACK}>is there a sub for the Hyper jell aside from the jimnie?
Jimnie is the brand name sub, there are other subs out there that are like, asian brands or whatever -
Date: Sat, Jan 10 2009 11:51:24
hey, what is the pen mod used in this
tutorial video by EternalSpin?
click here
and also
: http://fr.youtube.com/watch?v=LLYsDGcPN3M&...feature=channel -
Date: Sat, Jan 10 2009 19:59:11
Looks like Air MS I believe...
-
Date: Tue, Jan 13 2009 03:33:35
Is the Ayatori writable?
Also, can you use a Signo Tip instead of an HGG tip when creating the Momentum MX?
Thanks -
Date: Tue, Jan 13 2009 18:49:11
What mod is raimo spinning?
and second, are you supposed to empty the rushon body when making the rushon mod? -
Date: Tue, Jan 13 2009 19:11:27QUOTE (PillarsOfValhalla @ Jan 12 2009, 07:33 PM) <{POST_SNAPBACK}>Is the Ayatori writable?
Also, can you use a Signo Tip instead of an HGG tip when creating the Momentum MX?
Thanks
Yes the Ayatori is writeable.
You can also use the Signo tip but it looks really bad. -
Date: Thu, Jan 15 2009 09:50:45
how do you make saturn's (from KPSA) mod? i saw a pic on TEK's photobucket and it uses 2 playcolour 2s and 2 airfits but i don't know anything else about it
-
Date: Fri, Jan 16 2009 14:37:32
Do Dong-a Sign Pens can be found in every stationer in South Korea? Or is there any other shop that sells them? I'm asking coz my friend can't find it for me ;/
-
Date: Thu, Jan 29 2009 12:51:49
whats the jeb collab with the song as mamma mia? XD
-
Date: Mon, Feb 2 2009 03:51:40
whats the difference between pentel hgg k118 and k116?
-
Date: Mon, Feb 2 2009 12:22:55
^
Grip texture and ink colour i think. Im not sure but I heard there's a tiny difference in the tip but it barely makes a difference when modding. -
Date: Tue, Feb 3 2009 04:14:13
It's just ink.
k116 is normal
k116 is either metallic or pastel -
Date: Wed, Feb 4 2009 03:22:13
lol communist mudkip^^^^^
and ah ok, and uh, how does the g3 barrel compare to the rsvp barrel? and whats the guitrium mods weight comparable to? heavier than rsvp mx?
sry, not really 1 question? -
Date: Sat, Feb 7 2009 03:52:30
hey can anyone give me a tutorial on how to make the BSKT mod? (the mod that Bonkura used in JapEn 2nd)
I know that it's a ballsign barrel with keityo caps, but what else did he use? for the white part -
Date: Sat, Feb 7 2009 04:12:08QUOTE (DjWatermelon @ Feb 4 2009, 11:22 AM) <{POST_SNAPBACK}>lol communist mudkip^^^^^
and ah ok, and uh, how does the g3 barrel compare to the rsvp barrel? and whats the guitrium mods weight comparable to? heavier than rsvp mx?
sry, not really 1 question?
They have almost the same diameter. The plastic used in the G3 barrel is thinner. Shinier? Idk.. my G3s look shinier than RSVPs. Other differences would be removable tip, grip differences and backplug. -
Date: Sun, Feb 8 2009 15:02:52
What for are there special user for KPSA spinners and special topic for their combos?
I really want to know -
Date: Sun, Feb 8 2009 19:15:02QUOTE (Resonance @ Jan 13 2009, 10:49 AM) <{POST_SNAPBACK}>What mod is raimo spinning?
and second, are you supposed to empty the rushon body when making the rushon mod?
that blue and gray thingy is probably ballsign mod with tipsQUOTE (i.suk.at.everything @ Jan 15 2009, 01:50 AM) <{POST_SNAPBACK}>how do you make saturn's (from KPSA) mod? i saw a pic on TEK's photobucket and it uses 2 playcolour 2s and 2 airfits but i don't know anything else about it
i think he used a bic to connect it? idk then electrical black tape thing just fo shoQUOTE (Tvister @ Jan 16 2009, 06:37 AM) <{POST_SNAPBACK}>Do Dong-a Sign Pens can be found in every stationer in South Korea? Or is there any other shop that sells them? I'm asking coz my friend can't find it for me ;/
you have to visit some random stores... just look where they sell pens
most likely its at small stores
big stores have em tooQUOTE (DjWatermelon @ Feb 1 2009, 07:51 PM) <{POST_SNAPBACK}>whats the difference between pentel hgg k118 and k116?
k118 are the pastel and metallic ones
k116 are the normal ones i believeQUOTE (KL-7 @ Feb 8 2009, 07:02 AM) <{POST_SNAPBACK}>What for are there special user for KPSA spinners and special topic for their combos?
I really want to know
uh.....u want the link to the tread?
http://www.upsb.info/forum/index.php?showtopic=6644
this? i dont really understand your question -
Date: Sun, Feb 8 2009 19:19:15
Anyone have any Caras vids? I can barely find any on youtube.
-
Date: Sun, Feb 8 2009 19:21:30QUOTE (Charlie @ Feb 8 2009, 12:19 PM) <{POST_SNAPBACK}>Anyone have any Caras vids? I can barely find any on youtube.
u can check
http://www.upsb.info/forum/index.php?autoc...DE=cat&id=8
this thread..but most of em old
ill try to get more kpsa ppl clips later
ive been too lazy... havent really seen them for a while haha
------------------------------
can someone explain why jeb wont let me log in?
-
Date: Sun, Feb 8 2009 20:35:22
kind of a dumb questino, but why do so many MX's use this insert?
-
Date: Sun, Feb 8 2009 20:41:06QUOTE (Eric @ Feb 8 2009, 12:35 PM) <{POST_SNAPBACK}>kind of a dumb questino, but why do so many MX's use this insert?
If I'm correct that Chukii's insert, and idk it just like became famous, if you do the whole, same color grips and stuff. I think that because the community was so like... influential to one an other it just started to take everyone by storm. I think it looks great in an MX though. -
Date: Sun, Feb 8 2009 21:18:35QUOTE (SJ @ Feb 8 2009, 09:15 PM) <{POST_SNAPBACK}>uh.....u want the link to the tread?
http://www.upsb.info/forum/index.php?showtopic=6644
this? i dont really understand your question
no... I know where is this thread =)
I want to know why spinners from KPSA use this special thread but not general "Show of..." thread... =)
And why they use special KPSA profile? I mean this one - KPSA
e.g. there is no any special user for JEB spinners, but it's for KPSA users... why?
PS
hope you'll understand me now =)
PPS
SJ, can you help me with this question too? -
Date: Mon, Feb 9 2009 02:03:30QUOTE (SJ @ Feb 8 2009, 11:21 AM) <{POST_SNAPBACK}>u can check
http://www.upsb.info/forum/index.php?autoc...DE=cat&id=8
this thread..but most of em old
ill try to get more kpsa ppl clips later
ive been too lazy... havent really seen them for a while haha
------------------------------
can someone explain why jeb wont let me log in?
I've seen those already and most of them are old vids. And a korean update would be nice, especialy from Caras. :] -
Date: Mon, Feb 9 2009 02:55:41QUOTE (KL-7 @ Feb 8 2009, 01:18 PM) <{POST_SNAPBACK}>no... I know where is this thread =)
I want to know why spinners from KPSA use this special thread but not general "Show of..." thread... =)
And why they use special KPSA profile? I mean this one - KPSA
e.g. there is no any special user for JEB spinners, but it's for KPSA users... why?
PS
hope you'll understand me now =)
PPS
SJ, can you help me with this question too?
because alot of the kpsa ppl dont have accounts here so korean upsb ppl post for them
kpsa account is open to any kpsa users to use if they dont want to make their own accounts here
as for jeb special account, ask zombo. but mostly because there really isnt anyone who is willing to post for them.
as for dandan's pens, 1st and 2nd are just rushon mods as i said earlier. 3rd i dont know.
-
Date: Mon, Feb 9 2009 04:41:28QUOTE (SJ @ Feb 9 2009, 04:55 AM) <{POST_SNAPBACK}>as for dandan's pens, 1st and 2nd are just rushon mods as i said earlier. 3rd i dont know.
I remember your answer =)
But what about caps and grips of 1st and 2nd? And can you look for their images on KPSA?
-
Date: Fri, Feb 13 2009 15:59:28
Just curious if he used these mods..
-
Date: Fri, Feb 13 2009 16:10:08
I think he used one in his first solo
-
Date: Fri, Feb 13 2009 17:19:20
MX, yes.
MSXA would be oversized for him. -
Date: Sun, Mar 8 2009 03:59:21
What tips are on the end of Coulomb's namae mod? http://s8.photobucket.com/albums/a12/jim66...rrent=namae.png
I think they're signos... -
Date: Sun, Mar 8 2009 20:26:51
they look like signo or maybe g3, but if you want to make sure, just ask Tek
-
Date: Sun, Mar 8 2009 21:32:40
Anyone know or have the tutorial for a SEVEN watercolor mod? Just want to see how to make it. Don't have the parts though
-
Date: Mon, Mar 9 2009 02:09:23QUOTE (Lulz @ Mar 8 2009, 05:32 PM) <{POST_SNAPBACK}>Anyone know or have the tutorial for a SEVEN watercolor mod? Just want to see how to make it. Don't have the parts though
materials
1 watercolor body (expensive/hard to find)
2 ct caps
2 alpha gel tips (super expensive)
sarasa grips
most people add vinyl-tape stripes as well
take ct caps. hollow out the center pieces. refer to this for hollowing out caps:http://www.upsb.info/forum/index.php?showtopic=14864
remove the grip-stripe things from the alpha gel tips, place them in the caps, tip facing inwards.
put half a sarasa grip on each cap
hollow out watercolor body
put caps on
done -
Date: Mon, Mar 9 2009 10:04:16
Why do I have a bic that has the words 'SAILOR INDY BALLPEN BLACK INK ' written on them when I got(stole) it from a hotel?
-
Date: Tue, Mar 10 2009 00:26:30QUOTE (HKspinner @ Mar 9 2009, 05:04 AM) <{POST_SNAPBACK}>Why do I have a bic that has the words 'SAILOR INDY BALLPEN BLACK INK ' written on them when I got(stole) it from a hotel?
Its just a knock-off.
Bics and signo's has a crazy amount of knockoffs because the shape/process of making them is extremely cheap and simple.
Although, signo knock-offs don't have metal tips. -
Date: Thu, Mar 12 2009 02:40:42
Is the Seven mod writable?
Thank you -
Date: Thu, Mar 12 2009 02:42:24QUOTE (PillarsOfValhalla @ Mar 11 2009, 10:40 PM) <{POST_SNAPBACK}>Is the Seven mod writable?
Thank you
The original SEVEN mod is not writable, you can always make it write though. -
Date: Thu, Mar 12 2009 03:09:46QUOTE (K2 @ Mar 11 2009, 09:42 PM) <{POST_SNAPBACK}>The original SEVEN mod is not writable, you can always make it write though.
Thank you
-
Date: Thu, Mar 12 2009 10:48:54
What is the cheapest DR. _____ mod(KT,Commsa,CT,etc...)? Something that can at least use the Tip and Grip of the DR. GRIP (MP). And it can be easily be found in USA.
-
Date: Thu, Mar 12 2009 10:58:38
why is the rsvp mx so populair?
-
Date: Thu, Mar 12 2009 11:15:31QUOTE (edor @ Mar 12 2009, 10:58 AM) <{POST_SNAPBACK}>why is the rsvp mx so populair?
. Invented by Kam and used by him at a time when not nearly as many mods were around and so became instantly popular. Popularity has remained as it's fairly easy to make, only uses two pens, is decent for spinning and it writes. -
Date: Fri, Mar 13 2009 02:58:11
which is more prone to breaking? clear barrels or bodies like KT,CT,Comssa, etc...?
-
Date: Fri, Mar 13 2009 04:35:58QUOTE (Kurteous! @ Mar 12 2009, 09:58 PM) <{POST_SNAPBACK}>which is more prone to breaking? clear barrels or bodies like KT,CT,Comssa, etc...?
Well.. depends what you mean by breaking...
Clear barrels tend to Crack before breaking into 2 pieces. Takes alot of force to crack, but will break with one swift force
Plastic bodies tend to bend before breaking into 2 pieces. Takes less force to bend, but takes alot of small force over time to break.
-
Date: Fri, Mar 13 2009 07:34:21
barrels itself rarely break.. usually its the sanded part on a g3 barrel
-
Date: Sun, Mar 15 2009 01:23:03
Is a warped sonic with the pass going up still called a warped sonic, or is it just a nameless hybrid?
Also, is there a way to write for pen positions other than between two fingers?
For example, how would you write the starting position for the midbak? (outside of 1 and 3, but inside 2) -
Date: Wed, Mar 18 2009 19:53:45
Who is (or are) the spinner(s) that spun a blue MX with Moonz barrel with yellow grips? I remember watching it in a video and that person had a grainy camera. It was a Korean spinner. Can someone point me in the right direction?
-
Date: Wed, Mar 18 2009 20:03:25QUOTE (Eso @ Mar 18 2009, 03:53 PM) <{POST_SNAPBACK}>Who is (or are) the spinner(s) that spun a blue MX with Moonz barrel with yellow grips? I remember watching it in a video and that person had a grainy camera. It was a Korean spinner. Can someone point me in the right direction?
was it in a collab, day seesion, or single clip? -
Date: Wed, Mar 18 2009 20:30:51QUOTE (Eso @ Mar 18 2009, 09:53 PM) <{POST_SNAPBACK}>Who is (or are) the spinner(s) that spun a blue MX with Moonz barrel with yellow grips? I remember watching it in a video and that person had a grainy camera. It was a Korean spinner. Can someone point me in the right direction?
I know Toro spun a MX like the one you described, but he's not Korean, so I dunno... -
Date: Wed, Mar 18 2009 23:31:13
Would the tip of the Papermate Flexgrip Elite replace the HGG tip?
http://s7d5.scene7.com/is/image/Staples/s0...$sku$
it says so on wiki but i want to make sure that it does and there are no threads i have to cut. -
Date: Thu, Mar 19 2009 09:16:27
nooo. that tip is nowhere near hggs tips. Its completely different. The tip used in the pic on your link is like 5 times heavier and thicker than hgg.
-
Date: Thu, Mar 19 2009 09:43:24
can anyone give me the placings for world cup 2008? or even possible, the participants list and rounds?
-
Date: Thu, Mar 19 2009 10:29:19
what single sided mod has a momentum similar to the momentum of a DR. KT?
-
Date: Thu, Mar 19 2009 18:49:41QUOTE (Sian_ing @ Mar 19 2009, 05:43 AM) <{POST_SNAPBACK}>can anyone give me the placings for world cup 2008? or even possible, the participants list and rounds?
Wiki is your friend: http://www.upsb.info/wiki/index.php/World_Cup
doesn't have the participants names though.QUOTE (Kurteous! @ Mar 19 2009, 06:29 AM) <{POST_SNAPBACK}>what single sided mod has a momentum similar to the momentum of a DR. KT?
With the same weight or what? Maybe a kUzu or Saizen mod. -
Date: Thu, Mar 19 2009 19:02:39QUOTE (K2 @ Mar 19 2009, 02:49 PM) <{POST_SNAPBACK}>QUOTE (Kurteous! @ Mar 19 2009, 06:29 AM) <{POST_SNAPBACK}>
what single sided mod has a momentum similar to the momentum of a DR. KT?
With the same weight or what? Maybe a kUzu or Saizen mod.
Well, he asked for something with similar momentum so i wouldn't say kUzu or saizen as being pens with similar momentum, in fact, the saizen doesn't have much momentum at all...
i'd go with something that's comssa/kt/m&m/ct/etc... body based since the g3 or rsvp's plastic body will greatly lower a pen's momentum
perhaps try making a replica of minwoo's mod: http://i34.photobucket.com/albums/d141/Saske35/minwoomod.jpg
the front uses a dr. grip tip, and the back has tons of tips (i'm assuming) to balance that out... plus it uses a light plastic body -
Date: Fri, Mar 20 2009 02:33:54
okay im slow i know but what is the length nd weight of a comssa mod? metallic and non metallic
-
Date: Fri, Mar 20 2009 10:13:02
length is
comssa 18cm
metallic 20cm
its approximate -
Date: Fri, Mar 20 2009 15:41:01
does spinning light pens improve your performance with heavier pens?
-
Date: Fri, Mar 20 2009 15:50:41QUOTE (Sian_ing @ Mar 20 2009, 11:41 AM) <{POST_SNAPBACK}>does spinning light pens improve your performance with heavier pens?
Not necessarily, personally I have a more difficult time spinning with dr. kts and buster cyls after spinning with more normal seven mod/metallic comssa... but i suppose in most cases, it'll make spinning with the heavier pen seem easier... -
Date: Sat, Mar 21 2009 04:19:38
uhmm on penwish.com the detials for the buster cyl mod part (supertip barrel with comssa backplug and caps already in place) says that it is a couple of millimeters longer than a double capped comssa... so what would be the difference if i spun a double capped comsssa with airfit grips and tips on the edges?
(i cant really find super tips so i just wanna know what difference it would make) -
Date: Sat, Mar 21 2009 04:21:49
a comssa's barrel is really small compared to a supertip. it feels weird whenever i interchange between them
-
Date: Sat, Mar 21 2009 04:32:26QUOTE (khaotic @ Mar 20 2009, 09:19 PM) <{POST_SNAPBACK}>uhmm on penwish.com the detials for the buster cyl mod part (supertip barrel with comssa backplug and caps already in place) says that it is a couple of millimeters longer than a double capped comssa... so what would be the difference if i spun a double capped comsssa with airfit grips and tips on the edges?
(i cant really find super tips so i just wanna know what difference it would make)QUOTE (Sian_ing @ Mar 20 2009, 09:21 PM) <{POST_SNAPBACK}>a comssa's barrel is really small compared to a supertip. it feels weird whenever i interchange between them
Personally, they both feel the same to me.
Only difference I feel is the Comssa is a bit thinner.
-
Date: Sun, Mar 22 2009 19:01:00
What's the point of ink reversal? (as opposed to just removing the ink tube entirely)
Also,QUOTE (Pandubear @ Mar 14 2009, 06:23 PM) <{POST_SNAPBACK}>Is a warped sonic with the pass going up still called a warped sonic, or is it just a nameless hybrid?
Also, is there a way to write for pen positions other than between two fingers?
For example, how would you write the starting position for the midbak? (outside of 1 and 3, but inside 2)
-
Date: Sun, Mar 22 2009 19:09:10QUOTE (Pandubear @ Mar 22 2009, 03:01 PM) <{POST_SNAPBACK}>What's the point of ink reversal? (as opposed to just removing the ink tube entirely)
Also,
Kam told me the reversed inktube was made so that when you spin you don't get ink on your hands. and also then the mod can write. -
Date: Mon, Mar 23 2009 08:08:59
Apparently reversing your ink makes your mx more balanced. But i really don't see the differnce when i spin. You can take it out if you want. Its abit lighter, but if you get used to it, it'll be fine
-
Date: Fri, Mar 27 2009 22:43:17
Does the printing on Sunbursts come off easily if you spin it a lot?
-
Date: Sun, Mar 29 2009 22:48:33
What's the difference between the pass and around spins? (not the tricks, the spin types) Why are they categorized differently?
-
Date: Mon, Mar 30 2009 02:34:20
If any of you ordered comssas from PenDolSa (the unmod ones), how many profile grips do they gave you?
-
Date: Tue, Mar 31 2009 04:21:35
wind they give you as many as is in the pic. and those colours too.
-
Date: Tue, Mar 31 2009 11:08:21QUOTE (sketching @ Jun 23 2007, 03:08 PM) <{POST_SNAPBACK}>For when you only want to ask a simple question that does not already have a thread.
Examples:
Q: When is [insert foreign collab name] going to be released?
A: [insert date of release]
Q: Is [insert pen name] good for spinning?
A: If it works for you, then yes.
----
Original Thread
hello, can someone give me the forum of twps ?? -
Date: Tue, Mar 31 2009 14:40:27QUOTE (tony261193 @ Mar 31 2009, 12:08 PM) <{POST_SNAPBACK}>hello, can someone give me the forum of twps ??
TWPS:
http://twps.oxyhost.com/forum/index.php -
Date: Tue, Mar 31 2009 15:37:32
Can someone explain the difference between...
...Twisted sonic and inverse sonic?
...pass and around 0.5
Thanks! -
Date: Thu, Apr 2 2009 16:00:44QUOTE (G.lanz @ Mar 31 2009, 11:37 AM) <{POST_SNAPBACK}>Can someone explain the difference between...
...Twisted sonic and inverse sonic?
...pass and around 0.5
Thanks!
If you watch the videos of twisted sonic vs inverse sonic, you'll be able to see that the twisted sonic has 1.5 rotations while the inverse sonic only has 1.0 rotations. Look at which side the tip of the pen is pointing at first, and then see which way it is point afterwards. For the twisted sonic, the tip will face the opposite side at the end, and for the inverse sonic, the tip will face the same side when the trick is complete.
-Twisted sonic is the combination of a charge~> pass whereas inverse sonic is a sonic that goes in front of your finger instead of behind your finger (behind as in..having the finger folded in)
Pass and around are different in that the around 0.5 requires a push. The force needed to do an around 1.0 and a pass is different, and you use the same force that you would for the around 1.0 for the around 0.5, you just stop the around after 0.5 spins with another finger.
(With Around 0.5, you can create a korean looking mini combo.... Around 0.5 23-12 > pass 12-23 .... and it creates a counter look as opposed to how a simple pass rev 23-12 > pass 12-23 would look like)
So... for the twisted sonic vs inverse sonic, watch some vids and you'll see the difference.
For the Pass vs around 0.5, figure out the difference between teh initial pushes... and then you'll see the difference
Hope this helps
-
Date: Thu, Apr 2 2009 21:53:44QUOTE (JC @ Apr 2 2009, 12:00 PM) <{POST_SNAPBACK}>If you watch the videos of twisted sonic vs inverse sonic, you'll be able to see that the twisted sonic has 1.5 rotations while the inverse sonic only has 1.0 rotations. Look at which side the tip of the pen is pointing at first, and then see which way it is point afterwards. For the twisted sonic, the tip will face the opposite side at the end, and for the inverse sonic, the tip will face the same side when the trick is complete.
-Twisted sonic is the combination of a charge~> pass whereas inverse sonic is a sonic that goes in front of your finger instead of behind your finger (behind as in..having the finger folded in)
Pass and around are different in that the around 0.5 requires a push. The force needed to do an around 1.0 and a pass is different, and you use the same force that you would for the around 1.0 for the around 0.5, you just stop the around after 0.5 spins with another finger.
(With Around 0.5, you can create a korean looking mini combo.... Around 0.5 23-12 > pass 12-23 .... and it creates a counter look as opposed to how a simple pass rev 23-12 > pass 12-23 would look like)
So... for the twisted sonic vs inverse sonic, watch some vids and you'll see the difference.
For the Pass vs around 0.5, figure out the difference between teh initial pushes... and then you'll see the difference
Hope this helps
Yes, this was helpful, thanks
-
Date: Thu, Apr 2 2009 23:34:00
I was talking about the spin types, not the tricks. Both spin types involve the pen spinning around a finger, and as far as I know the spin types are only about the spin, not the push or catch - why are they categorized separately on the wiki?
-
Date: Fri, Apr 3 2009 05:46:52
If I'm sending money to someone in another country, would I need to go to the post office and send it there, or can I just put the letter in the outgoing box?
-
Date: Fri, Apr 3 2009 06:01:52
which is better?
a seven mod g3
a kuzu mod
f1r3f1y mod
key3 mod
or a ayatori mod? -
Date: Fri, Apr 3 2009 12:52:26
It's to remove confusion really.
Imagine breaking down a twisted sonic as charge 23-23 0.5 > mid around 0.5 23-12 > charge 12-12
Also, if you notice, there's a slight bit of difference in the start of the trick. -
Date: Tue, Apr 7 2009 07:45:55
Is a G3 MSXA possible?
-
Date: Tue, Apr 7 2009 13:26:22QUOTE (Ever @ Apr 3 2009, 01:46 AM) <{POST_SNAPBACK}>If I'm sending money to someone in another country, would I need to go to the post office and send it there, or can I just put the letter in the outgoing box?
You can do either I believe..QUOTE (PenMaster @ Apr 3 2009, 02:01 AM) <{POST_SNAPBACK}>which is better?
a seven mod g3
a kuzu mod
f1r3f1y mod
key3 mod
or a ayatori mod?
That's purely opinion.. some people think that kUzus are the best while others may think that f1r3fly's are the best..
I personally like the SEVEN mod, but that doesn't make it better than the other onesQUOTE (Kurteous! @ Apr 7 2009, 03:45 AM) <{POST_SNAPBACK}>Is a G3 MSXA possible?
Yeah, but you'd probably have to use a KT/CT/M&M cap for it instead of a comssa cap... -
Date: Wed, Apr 8 2009 06:58:16QUOTE (JC @ Apr 7 2009, 09:26 AM) <{POST_SNAPBACK}>Yeah, but you'd probably have to use a KT/CT/M&M cap for it instead of a comssa cap...
What if i can file the front of the g3 a bit? can i use a comssa cap on that? -
Date: Sun, Apr 12 2009 04:47:32
how to print a insert in 300dpi?, what will i do?
-
Date: Sun, Apr 12 2009 05:00:09QUOTE (PenMaster @ Apr 2 2009, 10:01 PM) <{POST_SNAPBACK}>which is better?
a seven mod g3
a kuzu mod
f1r3f1y mod
key3 mod
or a ayatori mod?
You can try a seven, it's a good mod. nothing special. A firefly is a stick, i dont recommend it, but it's up to you. It spins pretty badly (imo) which is why I guess no one seems to use it but A13X, but it's a really good-looking mod. I dont know about the rest.
i recommend that you do what i do. make your own mod. make it as nice as you like. test it out. if you dont like it, change it. if you come up with something really cool, name it yourself. it's nice having something that's purely yours that no one else has. being unique is nice, don't you think? too many seven and kuzu mods out there anyway. -
Date: Mon, Apr 13 2009 23:07:55
what happened to ps728 and and what happened to PSN 5th?
-
Date: Mon, Apr 13 2009 23:17:06QUOTE (Simplexã€ãƒ¾(^ã¸^)】 @ Apr 13 2009, 07:07 PM) <{POST_SNAPBACK}>what happened to ps728 and and what happened to PSN 5th?
Not sure about PSN 5th, but ps-728 has retired from pen spinning. -
Date: Tue, Apr 14 2009 21:12:57
The combo "Phya's Aerial Battle" once won a Kammy award for best single combo, winning against K4LC. Which tricks does this combo consist of, what's the breakdown?
-
Date: Tue, Apr 14 2009 23:34:47
I remember reading this somewhere, and it was answered, but I forget the answer and I couldnt find it again with the search bar.
Is the RSVP gel body the same as the Sunburst body? (Minus the barrel design of course) -
Date: Sat, Apr 18 2009 17:05:02QUOTE (Hope @ Mar 27 2009, 03:43 PM) <{POST_SNAPBACK}>Does the printing on Sunbursts come off easily if you spin it a lot?
No. Unless you spin it way too much... then it might from all those drops. -
Date: Sat, Apr 18 2009 21:07:45QUOTE (En-Nova @ Apr 14 2009, 06:34 PM) <{POST_SNAPBACK}>I remember reading this somewhere, and it was answered, but I forget the answer and I couldnt find it again with the search bar.
Is the RSVP gel body the same as the Sunburst body? (Minus the barrel design of course)
What?!?
aside from the barrel designs, sunbursts, colors, rzldzls, moonz, cubix, fine's, etc. etc. are all the same.
.. im confused as to wat your asking.
-
Date: Sat, Apr 18 2009 21:53:17QUOTE (Stevieboy7 @ Apr 18 2009, 05:07 PM) <{POST_SNAPBACK}>What?!?
aside from the barrel designs, sunbursts, colors, rzldzls, moonz, cubix, fine's, etc. etc. are all the same.
.. im confused as to wat your asking.
Actually, aren't sunbursts/the other RSVPs a little bit different? Like, rzdz, colors, moonz, cubix, fines, meds, are all grouped into one. But front of sunbursts are longer than the regular RSVP, but the body is shorter. JC had a pic somewhere, I'll try to find it. -
Date: Sat, Apr 18 2009 22:40:30QUOTE (Hastings @ Apr 14 2009, 05:12 PM) <{POST_SNAPBACK}>The combo "Phya's Aerial Battle" once won a Kammy award for best single combo, winning against K4LC. Which tricks does this combo consist of, what's the breakdown?
Twisted Sonic 23 - 12 -> 1/2 Pass 2x Reverse 12-34 -> Devil Horns Pinch -> Elbow Catch -> Elbow Pop -> Twisted Sonic 23 - 12 -> Levitator-> Back Hand Bounce -> Sonic 23 - 12 -> 1/2 Charge Normal -> Thumbaround Normal -
Date: Sat, Apr 18 2009 23:26:57
@Stevie/K2, here was my post with the pic: http://www.upsb.info/forum/index.php?showt...mp;#entry255677
-
Date: Sat, Apr 18 2009 23:38:08QUOTE (JC @ Apr 18 2009, 07:26 PM) <{POST_SNAPBACK}>@Stevie/K2, here was my post with the pic: http://www.upsb.info/forum/index.php?showt...mp;#entry255677
heh, it was Stevie who disagreed with you in that thread too.
Anyways, thanks JC. -
Date: Sun, Apr 19 2009 01:31:19QUOTE (Stevieboy7 @ Apr 18 2009, 05:07 PM) <{POST_SNAPBACK}>What?!?
aside from the barrel designs, sunbursts, colors, rzldzls, moonz, cubix, fine's, etc. etc. are all the same.
.. im confused as to wat your asking.
Actually no.
RSVP sunburst has gel ink. If you try to stick sunburst ink inside a colors/rzldzl/moonz/cubix/etc. it won't fit.
RSVP Gel looked exactly like the Sunburst so that's why I was asking. -
Date: Sun, Apr 19 2009 18:48:37
I'm not sure, but, shouldn't the first method in the Inverse Sonic article on the wiki be Charge 0.5 > Inverse Sonic?
-
Date: Wed, Apr 22 2009 05:19:00
I saw a clip of a person pen spinning extremely slowly on television. He did bakfalls and all. I can't find the video, can anybody help me find it?
-
Date: Wed, Apr 22 2009 08:05:39QUOTE (Archermitch @ Apr 22 2009, 01:19 PM) <{POST_SNAPBACK}>I saw a clip of a person pen spinning extremely slowly on television. He did bakfalls and all. I can't find the video, can anybody help me find it?
What person? Any1 can spin slow in TV. There is a thread about pen spinners on TV, but i forgot where it was. -
Date: Tue, Apr 28 2009 06:13:15
im getting 100 dollars to spend on pens (ordering from penwish).. i know this is a matter of opinion and personal preferences.. but what mods should i buy? or what mods should i buy the materials to make
-
Date: Wed, Apr 29 2009 07:56:14QUOTE (khaotic @ Apr 27 2009, 11:13 PM) <{POST_SNAPBACK}>im getting 100 dollars to spend on pens (ordering from penwish).. i know this is a matter of opinion and personal preferences.. but what mods should i buy? or what mods should i buy the materials to make
if youre a beginner, something like a metallic comssa or an unsharpened pencil
or just use an rsvp...
save the $100 and use it on good pens when you get better -
Date: Wed, Apr 29 2009 19:45:42QUOTE (SJ @ Apr 29 2009, 12:56 AM) <{POST_SNAPBACK}>if youre a beginner, something like a metallic comssa or an unsharpened pencil
or just use an rsvp...
save the $100 and use it on good pens when you get better
I second this notion. -
Date: Thu, Apr 30 2009 05:09:57QUOTE (Charlie @ Apr 29 2009, 02:45 PM) <{POST_SNAPBACK}>I second this notion.
im not a beginner so what would these good pens be? (i dont mod much so eh) -
Date: Thu, Apr 30 2009 11:23:08QUOTE (khaotic @ Apr 30 2009, 12:09 AM) <{POST_SNAPBACK}>im not a beginner so what would these good pens be? (i dont mod much so eh)
for double sided mods, i recommend getting met. comssas, buster cyls ,kts
but that's just me.
and if you have the time order it in parts and mod it yourself, its cheaper. -
Date: Sun, May 3 2009 06:05:16
I was wondering, about this discussion in the forum for quite a while now and I wondered. What is a Bust?
This topic has been discussed and tackled for a very long time, and come to think of it, it hasn't been finalized if a bust is a Bak Rev, or a fingerless Index Around.
With this topic, I aim to find out and have all of you debate on what you think a bust is. Is it a Bak Rev, or a Fingerless Index Around?
This is so that the confusion between these two are over, and that the similarities and differences are seen.
*Though when you look at it, a Bak Rev and a Fingerless Index Around just look the same.* -
Date: Sun, May 3 2009 06:13:25QUOTE (riverboy @ May 2 2009, 10:05 PM) <{POST_SNAPBACK}>I was wondering, about this discussion in the forum for quite a while now and I wondered. What is a Bust?
This topic has been discussed and tackled for a very long time, and come to think of it, it hasn't been finalized if a bust is a Bak Rev, or a fingerless Index Around.
With this topic, I aim to find out and have all of you debate on what you think a bust is. Is it a Bak Rev, or a Fingerless Index Around?
This is so that the confusion between these two are over, and that the similarities and differences are seen.
*Though when you look at it, a Bak Rev and a Fingerless Index Around just look the same.*
A Bak Rev is incorrect nomenclature for a fingerless indexaround that has become widely accepted. Same shit. pretty sure we have a thread about it. search it up. -
Date: Wed, May 6 2009 22:38:09
Is a tribute a video copying a person's style? I'm pretty sure it is...
-
Date: Thu, May 7 2009 12:35:16QUOTE (ninjaaa13 @ May 7 2009, 12:38 AM) <{POST_SNAPBACK}>Is a tribute a video copying a person's style? I'm pretty sure it is...
No, a tribute is usually just a collection of some spinner's vids. if you type "Eriror" in youtube for example, one of the first vids is "Tribute to Eriror" in which, all the vids are made by Eriror himself. Rorix (I think) collected some and edited them togather with some music.
A tribute is usually made to show you like the spinner, or such.
-
Date: Thu, May 7 2009 21:37:30
is there any different of dr grip japan and america grips?
cause sometimes i see dr grip grips foggy and sometimes very clear ones -
Date: Thu, May 7 2009 22:02:22QUOTE (xSpin @ May 7 2009, 05:37 PM) <{POST_SNAPBACK}>is there any different of dr grip japan and america grips?
cause sometimes i see dr grip grips foggy and sometimes very clear ones
Yeah. Japanese Dr. Grips are thicker, longer, and heavier. American Dr. Grips are foggy, stretchier, shorter, and wider. -
Date: Thu, May 7 2009 22:06:40
ahh, kay, could i still use it as a sub for a bonkura kt?
-
Date: Fri, May 8 2009 02:08:09
A guy from school told me that he saw some hgg's at world market when they were having some sale or something. He said they have a sale a couple of times a month and they sell hgg's at that time. Is their any truth behind this. please help. thanks.
-
Date: Mon, May 11 2009 06:52:25QUOTE (xSpin @ May 7 2009, 06:06 PM) <{POST_SNAPBACK}>ahh, kay, could i still use it as a sub for a bonkura kt?
if you defniitly can't find japanese ones sure go ahead. it really is w/e suits you best. be creative. -
Date: Tue, May 19 2009 17:02:17
What is an OUTSERT?
Thanks --Prince -
Date: Tue, May 19 2009 17:28:01QUOTE (Prince @ May 19 2009, 01:02 PM) <{POST_SNAPBACK}>What is an OUTSERT?
Thanks --Prince
an outsert is basically the opposite of an insert where it goes on the outside of the pen. people usually put them on pens like comssas where the pen is not clear but opaque. to make one yourself print an insert and then cover it with clear packing tape. wrap it around the body of a pen. -
Date: Wed, May 20 2009 23:08:46
What exactly is a freestyle?
-
Date: Thu, May 21 2009 00:37:14
How do you pay people overseas(buying/selling pens) with using the little all access gift cards you get from a regular phamacy store.
this is what it looks like https://www.allaccessgift.com/gift/
oh, and it says debit on it, but i dunno.
i also dont have a back accnt....Dx
so, kinda need help -
Date: Thu, May 21 2009 00:40:44QUOTE (ninjaaa13 @ May 20 2009, 07:08 PM) <{POST_SNAPBACK}>What exactly is a freestyle?
A freestyle is a combination of tricks that you put together right away as you start spinning. No previous planning is done during a freestyle combo.QUOTE (xSpin @ May 20 2009, 08:37 PM) <{POST_SNAPBACK}>How do you pay people overseas(buying/selling pens) with using the little all access gift cards you get from a regular phamacy store.
this is what it looks like https://www.allaccessgift.com/gift/
oh, and it says debit on it, but i dunno.
i also dont have a back accnt....Dx
so, kinda need help
If you don't have a bank account, I don't think you can use those debit cards. -
Date: Thu, May 21 2009 00:48:49
aww man Dx.
kay, thanks. -
Date: Sat, May 23 2009 15:10:43
Can someone give me some details on SEVEN's watercolor mod? such as length and weight..
-
Date: Sat, May 23 2009 19:40:14QUOTE (Resonance @ May 23 2009, 11:10 PM) <{POST_SNAPBACK}>Can someone give me some details on SEVEN's watercolor mod? such as length and weight..QUOTE (Fluctuated @ Mar 30 2009, 12:10 AM) <{POST_SNAPBACK}>hi today im gona do a tut on seven water color pen mod...
this tutorial was taught by one of my jeb frens.. which he gotten the tut in sevens blog.. i made a vid tut too Below
Length:19.4 cm
COP=COG
Weight: near a kt weight ?
pens needed
Spoiler:
1 pentel water color pen body
2 kt/m&m/ct caps
3 Alpha gel tips like this Click to see alpha gel pencil
4 sections of g2 ..
5 old sarasa not sarasa clip! (grip can be removed from pen)
1st..
remove the round thingy on top on the the kt/m&m/ct cap by using a hammer and a screw driver. or wadever way u can..
Spoiler:
2nd
put agel tip(must remove rubber thingy on the agel tip) into kt cap (inversed)
Spoiler:
3rd
cut sarasa grip into half and put it over the kt cap.. holding the a gel tip leave space for 2 section of g2 or supergrip on top ..
]
Spoiler:
4th
put 2 sections of g2 grip inside the sarasa grip..
Spoiler:
Spoiler:
5th
do the same thing again for the second cap over again .and u will have 2 completed caps
Spoiler:
6th
double cap the pentel water color pen with the 2 caps prepared
Spoiler:
7th
tape can be added on the cap
Spoiler:
8th
spin the seven water color mod...
Video Tutorial ok my spinning was choppy ><
Spoiler:
I'm not sure if you want the mod tutorial or not so I just pasted everything here from this thread.
Note: I know the original tutorial did not put the images in a spoiler but I put them in here to avoid lagging(for some people who may have weak connections or what). I've definitely no intention of editing anything for my own purpose. -
Date: Sat, May 23 2009 20:20:48
Great, thanks =)
-
Date: Tue, May 26 2009 04:12:58
Where can I find a tutorial for the RSVP L?
http://i8.photobucket.com/albums/a12/jim66...ng?t=1243310961 -
Date: Tue, May 26 2009 04:20:26QUOTE (Xero @ May 25 2009, 11:12 PM) <{POST_SNAPBACK}>Where can I find a tutorial for the RSVP L?
http://i8.photobucket.com/albums/a12/jim66...ng?t=1243310961
in the "approved tutorials section"
http://www.upsb.info/forum/index.php?showt...t=0&start=0 -
Date: Tue, May 26 2009 13:09:44
Much love Steve. Thanks.
-
Date: Sat, May 30 2009 02:22:10
what do you call a video or some video, where a pen spinner tries to copy a famous spinners moves as a tribute to him/her....
-
Date: Sat, May 30 2009 04:59:20
isnt that just called a tribute or something, not sure.
but anyways.
for a buster cyl, if you changed the barrel to a comssa/computer sign or a namae pen, would the weight decrease or feel any difference while spinning it? -
Date: Sat, May 30 2009 05:06:56
comssa barrel is shorter.
Namae barrel is thicker and shorter too i think.
There will definately be changes. -
Date: Sat, May 30 2009 05:13:39
mmkay thanks :]
-
Date: Sat, May 30 2009 15:30:43QUOTE (chrisPS @ May 29 2009, 10:22 PM) <{POST_SNAPBACK}>what do you call a video or some video, where a pen spinner tries to copy a famous spinners moves as a tribute to him/her....QUOTE (xSpin @ May 30 2009, 12:59 AM) <{POST_SNAPBACK}>isnt that just called a tribute or something, not sure.
no, a tribute is just a compilation of the spinner's videos. the only thing you do is edit the footage or throw in music, something like that.
but I'm not sure what a "video trying to copy a spinner's moves" is called. -
Date: Sun, May 31 2009 14:34:40
ninjaaa13 is correct in defining what a tribute is
a video where you copy another spinner's combo exactly is simply called a copy
a video where you copy only some sections of another spinner's combo or copy their style is called an imitation of that spinner -
Date: Sat, Jun 6 2009 00:51:44
Where can you find Beifa pens?
-
Date: Sat, Jun 6 2009 18:35:02
Is the World Cup a teams tournament, and the World Tournament an individual competition?
And do both occur every two years? -
Date: Sat, Jun 6 2009 18:41:16
yea agreed ^^^^
-
Date: Sun, Jun 7 2009 13:35:47
They alternate.
-
Date: Sun, Jun 7 2009 14:35:44QUOTE (Glamouraz @ Jun 7 2009, 09:35 AM) <{POST_SNAPBACK}>They alternate.
I assume that's directed towards my question?
so world cup one year, then world tournament the next year, and so on? -
Date: Sun, Jun 7 2009 14:38:30QUOTE (ninjaaa13 @ Jun 7 2009, 04:35 PM) <{POST_SNAPBACK}>I assume that's directed towards my question?
so world cup one year, then world tournament the next year, and so on?
yep~ -
Date: Fri, Jun 12 2009 00:45:42
are "daysessions" or "nightsessions" all freestyles?
-
Date: Fri, Jun 12 2009 03:59:29QUOTE (ninjaaa13 @ Jun 11 2009, 08:45 PM) <{POST_SNAPBACK}>are "daysessions" or "nightsessions" all freestyles?
Generally, yes. -
Date: Fri, Jun 12 2009 13:32:18
sorry for this noobish question...but.
are metallic comssas heavier than mxs?
sorry, never had a metallic comssa Dx -
Date: Fri, Jun 12 2009 13:54:50QUOTE (xSpin @ Jun 12 2009, 09:32 PM) <{POST_SNAPBACK}>sorry for this noobish question...but.
are metallic comssas heavier than mxs?
sorry, never had a metallic comssa Dx
Nope, my metallic comssa is 11g (with 5 rings anyball grip)
Weighed it at the post office XD
RSVP MX is ~12.6g (according to wiki), and it feels heavier ^^
edit: i mean 5 rings on each side, just incase i wasn't clear, should be clear though o.o... XD -
Date: Sat, Jun 13 2009 18:46:48
What is the name of the song in kUzu's solo?
http://www.youtube.com/watch?v=Yc-NxHRCAb0
Please PM with answer.
Edit: I understand that it's by Best Fiction, but I would like to know the SONG's name. -
Date: Sat, Jun 13 2009 19:28:07
Xero: You can try Tunatic or maybe you've already tried
-
Date: Mon, Jun 15 2009 19:43:46
http://www.youtube.com/watch?v=xK2C3KAUze8...feature=related
Does anyone know wot mod he uses? i see it a couple of times and im just wondering wot it is... possibly a material list and tut? ^^ -
Date: Mon, Jun 15 2009 19:47:19
It's a Dr. KT.
-
Date: Mon, Jun 15 2009 21:43:41
In general, what does everyone use to weigh their pens? I don't have access to an electronic scale so I'm wondering if there is another way?
-
Date: Mon, Jun 15 2009 23:32:26
Yea he's using a skyblue and pink Dr. M&M
http://penwish.com/product_info.php?cPath=...products_id=897 -
Date: Tue, Jun 16 2009 02:06:50
some weight it at the post office (i dont, i can never be bothered)
most just put a weight comparison
but i would also like to know a relatively cheap and convenient way of weight pens
although you could probably get electronic scales at chemists or somewhere.... -
Date: Wed, Dec 16 2009 18:43:55
Well, I know there's "Pens around the world" thread, but it's pretty old and not actual at all :/
Could someone make a list of countries where KTs or CTs are available to get? I'm tired of searching Trading/buing forum, the answer will make it much easier =D -
Date: Sun, Dec 20 2009 00:49:20
how long are JAp dr. grip grips
-
Date: Sun, Dec 20 2009 11:01:51
They're pretty same as french ones (maybe a little bit softer, but the shape is the same), exactly 5 cm long.
=========================================QUOTECould someone make a list of countries where KTs or CTs are available to get?
refresh. -
Date: Sun, Dec 20 2009 14:08:56QUOTE (Fuco @ Dec 20 2009, 05:01 AM) <{POST_SNAPBACK}>They're pretty same as french ones (maybe a little bit softer, but the shape is the same), exactly 5 cm long.
=========================================
refresh.
wait i thot jap were the hard ones? -
Date: Tue, Dec 22 2009 19:43:04QUOTE (Shakenbake @ Dec 20 2009, 03:08 PM) <{POST_SNAPBACK}>wait i thot jap were the hard ones?
Yeah, my bad... What i meant was that japanese one have a nicer feeling ^^ IMO they're a bit more grippy.
I've also checked which one is harder - i have 2 different shaker grips (one from Japan and one probably from China o_O): one of them is a bit harder while second is a bit softer than french one... -
Date: Fri, Jan 8 2010 18:53:17
Right now I'm using a metal comssa with rubber rings for grip. The metal tips make me drop it sometimes. And the rings don't offer as much grip as a regular grip, they're there to make the pen look nicer. Should I continue practicing with this or get a different pen? I do like the weigh of this one. Is there another easy way to add weigh without putting the metal tips on the tips?
-
Date: Sun, Jan 10 2010 05:44:43
you can either:
put paper/sticky tack in the caps (only if you are sure ur gonna like it, sticky tack is a bitch to get out)
or, you can put the tips inside the caps, but this can change the spinning feeling
as to whether you change pens, thats your decision
if you have another pen, then by all means, try that one
if you can afford it, again, if you want to -
Date: Thu, Jan 21 2010 03:02:44
I was just wondering if there are any LED Mod Tutorials out there...
I've seen the PENMAWASHI on Penwish, but they just seem so bulky and awkward. >.>
Thanks guys! -
Date: Fri, Jan 22 2010 04:44:27
Who is the best finnish spinner?
-
Date: Fri, Jan 22 2010 04:49:37
There is no best.
-
Date: Fri, Jan 22 2010 07:34:31
if there is no best spinner in finland - name few good spinners.
-
Date: Fri, Jan 22 2010 14:06:19
http://www.youtube.com/watch?v=ZnHQKa77Veg
Can someone tell me what are the mods used in the first combo and the one @1:40?
Thanks -
Date: Sat, Feb 6 2010 15:13:51
http://www.youtube.com/watch?v=m8Qy6nsHW6M
If the pen doesn't go around the thumb, isn't it a scissors spin rev.?
By the way is there an official name for this trick yet? -
Date: Sun, Feb 7 2010 12:01:25
http://www.youtube.com/watch?v=im-9vxgdP2k#t=54s
And also the type of pen she is using. >.> -
Date: Sun, Feb 7 2010 18:48:55
charge 23
i think once she did a pass, but that's when she dropped it -
Date: Sun, Feb 7 2010 19:13:25
Wow really? It seems like she does much more. I think I linked it too ahead of time, at one point she looks like she does something with her thumb. Also the angle makes it seem like she does more when she's just doing a charge.
-
Date: Tue, Apr 13 2010 08:34:17
1 post, 2 answers:
1. What is Haduri?
2. What is ta to palmspin world record? -
Date: Tue, Apr 13 2010 09:42:30QUOTE (mansik @ Apr 13 2010, 06:34 PM) <{POST_SNAPBACK}>1 post, 2 answers:
1. What is Haduri?
2. What is ta to palmspin world record?
1. program used for recording videos, used by many korean spinners (and also supawit and a few others)
2. record for [fl ta ~ palmspin] continuous is x170 by spinnerpeem, record palmspin revolutions is ta ~ palmspin 14.0 by clumsy [JEB] iirc (A-13X might have beat in, i'm not sure, check his 2 1/2 year solo video) -
Date: Wed, Apr 14 2010 09:21:02
Looking for that video where Kin (I think he was called meteor at the time) and some other guy did like 50 mini combos for intermediate spinners. Been looking for it for ages but havn't had success :/
Thanks
EDIT: Found ^^
