UPSB v3

Tutorials Pending Approval / Riverboy's Rerversed MX

  1. riverboy
    Date: Wed, May 27 2009 07:16:09

    *Background:

    I wanted a mod that was one-sided, and had a good momentum but the RSVP MX couldn't satisfy me.
    So I made the Reversed MX (but, its more like a reversed msxa). SORRY FOR THE BAD QUALITY PICTURES.

    Here's The First Version.

    The Riverboy Reversed MX v1
    COG= COP
    Length= 21.5 cm
    Weight= About the Weight of an Ayatori
    Style= Single Sided
    Writing Mechanism= Non-Retractable
    Ink Type= Ball Point
    Estimated Cost= $9 (or around that much)

    ------------------------------------------------------
    Material List:

    1- Pentel RSVP
    1- Comssa (Cap)
    1- HGG (tip)
    1- G3 (tip)
    1- Super Grip (grip) + extra stripes (3 stripes)
    1- Donga Anyball (First 2 stripes)

    Tools:
    Masking Tape
    Scissors
    Double sided tape


    Spoiler:

    ------------------------------------------------------
    HOW TO MAKE IT?


    1st step-

    Get the RSVP, and put the grip aside.
    While the "grip place" of the RSVP is empty, slide in the 3 stripes of super grip grip onto the empty spot. After this, slide back the RSVP grip (that you took off) like so.


    Spoiler:


    2nd step-

    Next, Grab your Super Grip and Cut the first 3 pairs of Stripes. Like so.


    Spoiler:


    Next, slide the cut grips onto the comssa cap.


    Spoiler:


    3rd step-


    Spoiler:
    To finish off the pen, get your HGG tip, and Your G3 tip. And stick 'em together with double sided tape. Like this. HGG TIP ON G3 TIP.


    Then put it inside the Grip.


    To make this Mod look nicer, slide the cut anyball grip on the Super Grip. (In the picture I used a cut super grip, but its better with donga anyballs)

    Then put some masking tape onto the Back Plug of the RSVP. And attach the Comssa cap.

    NOW THE MOD IS DONE!




    -----------------------------------------------
    __________________________________

    Now the 2nd Version

    The Riverboy Reversed MX v1
    COG= COP
    Length= 20.5 cm
    Weight= About the Weight an Ayatori
    Style= Single Sided
    Writing Mechanism= Non-Retractable
    Ink Type= Ball Point
    Estimated Cost= $7.5 (or around that much)


    Material List:

    1- Pentel RSVP
    1- Comssa Cap
    1- Signo Tip
    1- Super Grip
    1- Dong- A Anyball Grip (First 2 stripes)

    Tools:

    Double Sided Tape
    Scissors
    -----------------------------------------------------

    Now This Version is Really Easy.


    Spoiler:



    1st step-

    Just Do The step 2 of the first Version. biggrin.gif

    2nd step-

    Get the comssa cap part, and stick your signo tip in.

    After that put the two stripes of Anyball grips on the top of the super grip.

    Put a little double-sided tape onto the back plug of the RSVP and attach your Finished Comssa Cap mod.


    ---------------------------------


    Please Comment. I've gotten a lot of feed back that this was a nice mod. SO I hope all of you like it too.
    biggrin.gif

    Check out my videos to see the momentum of this mod.

  2. Swifty
    Date: Wed, May 27 2009 21:13:11

    Someone already made a mod like this
    i think its on GPC
    but you put the comssa cap on the backcap threads, and they used 2 hgg tips

    sorry mate :x

  3. riverboy
    Date: Thu, May 28 2009 06:21:45

    oh that sucks....

    But you're not sure right? because you said.. "I think".

    Let's just wait for what the mods have to say.

  4. Swifty
    Date: Thu, May 28 2009 15:42:43

    No i meant like, i think its GPC, if not FPSB.
    But someone made it.
    :/