UPSB v3

Tutorials Pending Approval / ImaG1n'

By Skahars

  1. simpic21
    Date: Tue, Jun 9 2009 19:28:48

    Hi UPSB, here it's Simpic21 from FPSB and BPSC, i'm going to give you a nice tutorial of a great French mod.
    Enjoy.


    Name : ImaG1n'
    Made by : Skahars
    Double caps
    Size : 21cm
    Weight : ~17g minimum
    COP=COG


    Pen required :
    - 2 Pilot G1
    - 2 HGG
    - 2 long grip (Example: part without ring of a G2 grip)
    - Lot of grip


    Step 1 :
    Unmount the pens.
    Keep a G1 body, a HGG inktube, file the G1 and the HGG caps.


    Step 2 :
    Put the G1 caps on the two sides of the body.


    Step 3 :
    Take a long grip and put it on the extremity of a G1 cap, let it a little bit overpass. Put a HGG cap on other side of the grip. (Twice)

    The HGG cap and the G1 cap are joined by the long grip.


    Step 4 :
    Creative step! Take the ring of grip and put them as you want. The caps are long, so it's possible to make some realy nice thing.


    Step 5 :
    Put an insert in the G1 body with the HGG inktube.

    Well done, you have made a wonderful ImaG1n' !



  2. Pen Islandâ„¢
    Date: Tue, Jun 9 2009 19:53:20

    so wot u done is put hgg cap over the g1 cap? and can i use sandpaper to smoothen out the caps?

  3. simpic21
    Date: Tue, Jun 9 2009 21:02:21

    QUOTE (Pen Islandâ„¢ @ Jun 9 2009, 09:53 PM) <{POST_SNAPBACK}>
    so wot u done is put hgg cap over the g1 cap?


    It's the G2 grip.

    QUOTE (Pen Islandâ„¢ @ Jun 9 2009, 09:53 PM) <{POST_SNAPBACK}>
    and can i use sandpaper to smoothen out the caps?


    Probably.