UPSB v3
Temporary Bin / From: R-Stic Tutorial
From Topic ID: 8588
-
Date: Sun, Nov 15 2009 14:31:54QUOTE (thnikk @ Jul 16 2008, 05:30 PM) <{POST_SNAPBACK}>Hello Everyone and welcome to the R-Stic Tutorial!!!!!!!!!!!!!!
This Is my second tutorial released by me
This mod was created by Mr. LSC from PenDolSa but this Is my way of making it. Im not sure how he makes It because I have never had one before to reverse engineer. The length comes up a bit short wut whatever, at least I can say "close enough".
Stats:
Length- 20.7 cm
Weight- MX like
COG=COP
so let us begin
What You'll Need:
1 Bic Round Stic
2 Bic Ultra Round Stic Grips
2 Papermate profiles/anyball/SGM
2 G-3 Tips (can be subbed with signo or something similar*)
Step 1: Disassemble pens and keep these parts
Spoiler:
Step 2: Put an outsert on the Bic Round Stic Barrel
Spoiler:
Spoiler:
Step 3: Put the parts of the Ultra round stic grips onto the Round stic barrel
Spoiler:
Step 4: Wrap some teflon tape on the ends for the tips to screw onto and put a tiny bit of tape on the grip part of the ultra round stic grip so you dont see the pattern under the grip (* If you subbed the tips, You may need to cut off a bit of the ultra round stic grip ends so they go down more)
Spoiler:
Step 5: Screw the tips to the ends
Spoiler:
Step 6: Add grips
Spoiler:
And voilà ! You just made an R-Stic!
FINISHED PRODUCT:
Spoiler:
If You have encountered any problems while making this mod or see any mistakes in this tutorial, please feel free to let me know
pretty cheap and still looks good i think ill make 1 if i can find some g3 tips laying arround