UPSB v3

Temporary Bin / From: Filing down a F1r3fly G3 Mod

From Topic ID: 22240

1. unicorndog

   Date: Sun, Nov 15 2009 14:44:34
   QUOTE (Nation @ Nov 13 2009, 12:10 PM) <{POST_SNAPBACK}>
   Alright, I just figured out this today, it works very well.
   
   It's very easy, It doesn't need pictures.
   
   You will need:
   Power drill
   File
   
   This works with any mod.
   
   1. Cut off the Grip off the g3 and file down the bumps.
   2. Take the drill, and Open the drill bit end as wide as possible.
   3. Stick the g3 inside, and tighten the drill, but don't tighten it a ton, that may crack the barrel
   4. Spin the drill and hold the file to the g3 until it is filed enough to fit your needs!
   
   Tips:
   Don't be afraid to spin the drill quickly, but still be careful.
   For small increments, do it by hand.
   
   Enjoy your new mod!
   For the f1r3fly, this takes about 20 min, maybe less.
   
   YAY! now you won't get carpal tunnel!!
   
   
   wow sound good but i wish there was pics that way i could see before i toor it up