UPSB v3
Tutorials Pending Approval / Key3 Tutorial Translation
-
Date: Mon, Jan 11 2010 04:55:18
The Key3 Mod by Key3
Materials
1x G3
2x Hybrid Fine or Hybrid Gel Grip(only need the tips)
1x Signo Tip and Grip
1x Hyper Jell(Cap)
1x Tapli Clip (Grip)
1x Plastic G3 Tip
Specifications
Length-20cm
Weight-14 grams
Price- varies from where you buy the pens and how much they cost when you buy them.
Tools
Sandpaper/nail filer
Super glue(I prefer teflon tape, so you can reuse the tips
but in this mod you will need super glue)
A brain
Step 1.
Take the G3 body,Take the tip off, and Put it off to the side(you will need it later), take the Grip off the front by cutting it off and then shave down the bumps that are by the tip and the body.
Step 2.
Get the plastic G3 tip and you will need to super glue the signo onto the the g3 tip,or you can screw it on tightly , otherwise it will fall off and your face will be like :gah:
Step 3.
Put the HGG tip inside the G3, inversed..
Step 4.
Cut 6 rings off the top of the G3 grip to cover the clear part of the Tips (not really neccessary, looks better without it).
Step 5.
Cut about 1 Centimeter off the back of the TAPLICLIP (Not hyper jell) grip and slide it down the front of the G3 body.
Step 6.
Place your second HGG tip into the HYPER JELL (not tapliclip) grip, Cut off .2 cm of the grip and put it into the hyper jell Cap.
Step 7.
Add tape around the back of the G3, so that the hyper jell cap is sturdy.
Step 8.
Put the Signo Grip onto the front part of the pen.
Done
I am not saying I made this mod, I just wanted to make a tutorial because I seem to see a bunch of people saying if someone can translate it and I've never seen one on upsb so I made one!
I hope this helps everyone ^^ -
Date: Mon, Jan 11 2010 04:56:33
we already have this tutorial translated... and the fact that you dont know that the key3 mod is made by key3 is just...
-
Date: Mon, Jan 11 2010 04:58:57
haha sorry i didnt know.
-
Date: Tue, Jan 12 2010 00:30:06
This is a good tutorial, much better than the other tutorial, but in needs pics, and Nobody uses superglue, just screw the signo tip into the g3.
Should be approved otherwise.
I can take pics if you want.
And some of the tut is hard to understand, I made it more clear:
Materials
1x G3
2x Hybrid Fine or Hybrid Gel Grip(only need the tips)
1x Signo Tip and Grip
1x Hyper Jell(Cap)
1x Tapli Clip (Grip)
1x Plastic G3 Tip
Tools
Sandpaper/nail filer
Super glue(I prefer teflon tape, so you can reuse the tips
but in this mod you will need super glue)
A brain
Step 1.
Take the G3 body,Take the tip off, and Put it off to the side(you will need it later), take the Grip off the front by cutting it off and then shave down the bumps that are by the tip and the body.
Step 2.
Get the plastic G3 tip and you will need to super glue the signo onto the the g3 tip, otherwise it will fall off and your face will be like :gah:
Step 3.
Put the HGG tip inside the G3, inversed..
Step 4.
Cut about 0.8 cm off the top of the G3 grip to cover the clear part of the Tips (not really neccessary, looks better without it).
Step 5.
Cut about 1 Centimeter off the back of the TAPLICLIP (Not hyper jell) grip and slide it down the front of the G3 body.
Step 6.
Place your second HGG tip into the HYPER JELL (not tapliclip) grip, Cut off .2 cm of the grip and put it into the hyper jell Cap.
Step 7.
Add tape around the back of the G3, so that the hyper jell cap is sturdy.
Done. -
Date: Tue, Jan 12 2010 00:39:07
Thanks nation I'll update it with your version, and please send me a few pictures to my email: [email protected]
-
Date: Tue, Jan 12 2010 00:47:48
people dont need pictures if there already are pictures.
http://annkou2.blog105.fc2.com/blog-entry-177.html -
Date: Wed, Jan 13 2010 20:26:09QUOTE (Baaron @ Jan 11 2010, 06:47 PM) <{POST_SNAPBACK}>people dont need pictures if there already are pictures.
http://annkou2.blog105.fc2.com/blog-entry-177.html
But it doesn't have all the pictures I need ._.