UPSB v3

Temporary Bin / Double RSVP

bi a op

bi a op
Date: Fri, Feb 5 2010 10:14:58

-----------------------------------------------------------------
A double capped RSVP with profile/sailor/Dr. Grip grips/Super Grip grips on each cap.
I used the color, black in this tutorial. You can use whatever color you like, don't get confused.

-----------------------------------------------------------------
Statistics:

Double RSVP

COG: COP (if made correctly)

Length: 20.5 cm

Weight: RSVP MX < Double RSVP < Dr. KT

Style: Double sided

Writing-Mechanism: Non-retractable

Estimated cost: 5$ - 10$ (Depends on what grips you use)

-----------------------------------------------------------------
Materials needed:

2x Pentel RSVP
1x HGG (Backcap/backplug)
1x Papermate Profile (Only the big section of the grip is needed)
Random grips of your choice.
Sharp kife, sandpaper etc
-----------------------------------------------------------------

Spoiler:

1.) Take the RSVP apart, remove the ink tube, then assemble. You also need another RSVP cap and grip.

2.) Put another RSVP grip inside the secondary cap. (Do not use the grip that are already on the RSVP)

3.) Put the HGG backplug into the RSVP cap with the grip inside, push it until it's stuck. Then put the sailor grip inside. (This is for balancing).

4.) Cut the RSVP tip off, there should be a thing line on the tip, cut it around that line. Be careful, you don't want to cut the piece of so that the cap won't fit. (This is for balancing).

5.) Paint the cutted tip black. You may also want to paint it inside too, this makes tha black color less transparent.

Handy Tips ->

Take the grip off first, like I did. then put it back on.

6.) Put the cap with RSVP grip inside on the back of the RSVP.

7.) Cut a piece of paper, 0.9cm*2.8cm. Paint it black and put it inside the empty RSVP cap. Not too far inside.

8.) Put the cap with the black insert on the tip of the RSVP.

You should now have 2 RSVP caps, one with black insert and one with HGG backplug and Profile Grip inside (just to make sure you got everything right).

Put insert.

Done!

-----------------------------------------------------------------
F.A.Q

Q: I'm dumb and confused, where to put the caps?
A: The cap with grip inside goes on the back of the RSVP. The other one with insert goes on the tip (wich is now cut).

Q: I cut my RSVP til like you described, now the cap is loose and falls of.
A: Well, you cut it too much. I guess you could add a bit of tape around the tip, tape always helps.

Q: You do alot of weird things in this tutorial
A: Most of it is for balancing, the insert inside the cap is for the look, so it looks like theres grip inside both caps ^^

Q: What grips did you use?
A: I used black and grey Sailor grips and Dr. Grip grip.

Q: This tutorial was noobish and confusish, I'll go back lookin' at K4S's tutorials, suckaz!
A: It's my first tutorial, be nice

-----------------------------------------------------------------
Awesome
Date: Fri, Feb 5 2010 10:32:55

Usually you want to post your pen in show off your pens first then see if you get any requests for a tutorial. I am not sure if this mod really warrants a tutorial.

The actual tutorial is fine though, and seems fairly easy to follow.
Kaffatsum
Date: Fri, Feb 5 2010 11:33:38

I dont think anyone publically wanted this mod to be tutorialized..
Mod looks strange IMO
Weight Range is kind of broad..
Its a simple mod.. im sure people have made this before.
bi a op
Date: Fri, Feb 5 2010 21:06:02

What do you mean? You don't think it's heavier than Dr. KT?
Nation
Date: Fri, Feb 5 2010 21:06:14

okay, no rage.
This mod has been made many times before, It's not a new mod, wait for requests plz kthx.
There is no way it is heavier than a KT.
Nor is it balanced.
bi a op
Date: Fri, Feb 5 2010 21:08:40

QUOTE (Nation @ Feb 5 2010, 10:06 PM) <{POST_SNAPBACK}>
okay, no rage.
This mod has been made many times before, It's not a new mod, wait for requests plz kthx.
There is no way it is heavier than a KT.
Nor is it balanced.

Make one yourself, follow everystep and you will find it balanced and heavier than Dr. KT.
Nation
Date: Fri, Feb 5 2010 21:10:52

QUOTE (bi a op @ Feb 5 2010, 03:08 PM) <{POST_SNAPBACK}>
Make one yourself, follow everystep and you will find it balanced and heavier than Dr. KT.

I made one.
It's not heavier, nor is it PERFECTLY balanced.
It's slightly heavier than a signo tipped MX
Tushix
Date: Fri, Feb 5 2010 21:12:37

DO you even have a dr KT? Cos I can tell you now... It's not heavier :/
bi a op
Date: Fri, Feb 5 2010 21:13:17

QUOTE (Tushix @ Feb 5 2010, 10:12 PM) <{POST_SNAPBACK}>
DO you even have a dr KT? Cos I can tell you now... It's not heavier :/

Yes I do, it feels heavier.
Zombo
Date: Fri, Feb 5 2010 21:17:31

for your sake, op, im closing your topic

ppl here are very touchy about tutorials, but you'll be fine if you follow the sticky in this section: http://www.upsb.info/forum/index.php?showtopic=12632

read the first section where it says "newcomers read"

all flamers have been warned.