UPSB v3

Tutorials Pending Approval / Signo-tipped Bellcolor Caps

method to attach signo tips onto bellcolor caps!

  1. blahblahting
    Date: Sun, Feb 21 2010 03:02:12

    Hey guys biggrin.gif so as some of you may know, my blah dc uses signo tips and bellcolor caps. I have tried putting the signos on w/ Thnikks white comssa method, but the bic rt mechs were too loose. I got the idea for this method while i was taking apart an rt bic huh.gif Anyways, i just created this thread to share my findings. I hope nobody discovered this before me or I would just feel like a complete douchebag xD

    Doesnt look much different from Thnikk's method, but oh well:




    Sorry I dont have step-by-step pictures sad.gif
    ------------------------------------------------
    [Materials]
    1x Retractable Bic Round Stic Tip
    2x Signo Tip
    2x Bellcolor Cap
    whatever else you're using for your mod
    ------------------------------------------------
    [Tutorial]
    1) thicken the barrel portion of the rt bic tip with tape until you can screw a signo tip onto it.

    2) screw the signo tip on

    3) cut the barrel portion rt bic tip so a little bit more than 1mm of the bic tip sticks out from the signo tip (see first picture)

    4) put the modified signo tip over the bellcolor cap nub (see second picture)

    5) repeat steps 1-4 with the other bellcolor cap+signo tip

    6) use these caps on whatever mod you plan to use

    NOTE: there should be enough left of the barrel portion of the bic rt tip to use the same tip AGAIN. this is why only ONE bic rt tip is needed wink.gif
    NOTE: some bic rt tips do not fit over bellcolor cap nubs (one of mine doesnt)

    ------------------------------------------------
    Blah DC v2 made with the method shown above:

  2. zincabopataurious
    Date: Sun, Feb 21 2010 03:26:37

    I actually use a method that's similar to yours for attaching signo tips to comssa caps, which are similar to bellcolours, except I use hyperjell or jimnie grips. It's the same thing basically, except I used a small strip of the grip, and screwed the signo tip onto that, and then screwed that onto the comsa cap. I like your idea of using the bic tip though, I don't think that's a part that's used very often for pen mods, compared to hyperjell grips.

  3. blahblahting
    Date: Sun, Feb 21 2010 03:29:03

    this is essentially a variation of Thnikks white comssa method of attaching signo tips, but adapted to fit bellcolor caps

  4. Nation
    Date: Mon, Mar 8 2010 20:51:00

    This is actually really cool, I want a blah DC v2 tutorial now. D:<

  5. blahblahting
    Date: Tue, Mar 9 2010 02:51:51

    v2 is same as v1 but with bellcolor caps and dr grip grip :/
    and v1 is a signo tipped comssa on a super pirat barrel with hgg tips inside the caps :/ (i think i told you already right? or maybe it was someone else tongue.gif)

    v2 is ridiculously short for some people (i hav small hands), so to make it longer, dont file as much of the super pirat barrel so the bellcolor caps dont go as far on. tape on front can also keep caps from going onto the super pirat barrel as much

  6. Nation
    Date: Tue, Mar 9 2010 20:40:01

    cool, I was the one you told... I'll make it when I get haem.

  7. blahblahting
    Date: Sat, Mar 13 2010 00:36:59

    oh fyi this mod is too short for most people. most ppl probably think the spinning space is too small also, but theres more spinning space than a kt xD

  8. whizz
    Date: Wed, Mar 17 2010 22:52:51

    You can aslo use a central part of Pilot SuperGrip automatic part for ComSSa caps in a way shown by blahblahting. The photo of this method: