UPSB v3

Tutorials Pending Approval / R.S.V.P ST

By: BLIN

  1. Chief_Snake
    Date: Tue, Jun 22 2010 20:51:03

    R.S.V.P. ST Mod by: BLIN
    Translated with permission by: ChiefSnake
    Items needed:
    1)Pentel Hybrid Gel Grip (grip+ 2 tip)
    2)Pentel R.S.V.P.
    3)Crayola Super Tips (Cap)
    4)Uni signo (tip)

    Instructions:
    1) shave the front part so it is even throughout the front of the Pentel R.S.V.P.

    2) Use a drill or file to make the super tip hollow throughout the Crayola Super Tips cap

    3) Put the cap from the Crayola Super Tips on the Pentel R.S.V.P.

    4) Using either tape or glue, stick the hgg tip into the back of the signo tip. Then place the signo tipped hgg tip into the front of the RSVP.

    5)Stick the second hgg tip into the R.S.V.P. cap then put the Pentel R.S.V.P. grip into the R.S.V.P. cap followed by an hgg ring placed into the Pentel R.S.V.P. Cap.


    Done! You can make the mod 20.2 - 21.2 см (depending on how far you push the tip into Crayola Super Tip cap).




    Side note: I have made this mod, it spins well, but you can hacksaw off the front of the RSVP rather then filing it down. This mod spins different then any other mod I have spun.

  2. Kirby
    Date: Tue, Jun 22 2010 20:56:42

    one tiny tiny problem with the tutorial is you say HGG (grip and 2 tips), I didn't see HGG grip anywhere in the mod. Overall nice tutorial and nice mod thumb.gif But of course its going to spin different than any other mod you've spun, nearly all mods do. also add specs please (I know you already have length)

  3. Chief_Snake
    Date: Tue, Jun 22 2010 21:03:08

    QUOTE (Kirby @ Jun 22 2010, 03:56 PM) <{POST_SNAPBACK}>
    one tiny tiny problem with the tutorial is you say HGG (grip and 2 tips), I didn't see HGG grip anywhere in the mod. Overall nice tutorial and nice mod thumb.gif But of course its going to spin different than any other mod you've spun, nearly all mods do. also add specs please (I know you already have length)

    Hgg grip ring in cap (not needed) but anyways, this mod really does spin really weird. But it feels good. Like the first time you spun a waterfall. It's a new feeling, I dunno how to describe it. I'll go weigh mine now, I guess, and add in the weight.

  4. Kirby
    Date: Tue, Jun 22 2010 21:08:12

    QUOTE (Chief_Snake @ Jun 22 2010, 04:03 PM) <{POST_SNAPBACK}>
    Hgg grip ring in cap (not needed) but anyways, this mod really does spin really weird. But it feels good. Like the first time you spun a waterfall. It's a new feeling, I dunno how to describe it. I'll go weigh mine now, I guess, and add in the weight.

    epic comparison. And ok I think I'll make it (I got all the parts emot-woop.gif ) also I assume COG=COP?

  5. Chief_Snake
    Date: Tue, Jun 22 2010 21:12:22

    QUOTE (Kirby @ Jun 22 2010, 04:08 PM) <{POST_SNAPBACK}>
    epic comparison. And ok I think I'll make it (I got all the parts emot-woop.gif ) also I assume COG=COP?

    Yea. Cog is pretty much cop. I made mine a bit differently without the hgg in front and signo in back because I like conserver my hgg's >.> but yea. Pretty much.

  6. Kirby
    Date: Tue, Jun 22 2010 21:15:06

    QUOTE (Chief_Snake @ Jun 22 2010, 04:12 PM) <{POST_SNAPBACK}>
    Yea. Cog is pretty much cop. I made mine a bit differently without the hgg in front and signo in back because I like conserver my hgg's >.> but yea. Pretty much.

    but then your adding weight in back and taking off wright in front vs. the original way........

  7. Chief_Snake
    Date: Tue, Jun 22 2010 21:20:18

    QUOTE (Kirby @ Jun 22 2010, 04:15 PM) <{POST_SNAPBACK}>
    but then your adding weight in back and taking off wright in front vs. the original way........

    Yes. Mine is a bit back heavy. So yours should be fine if done properly.

    I just swapped out caps And put a cap on with an hgg tip and stuck an hgg on front. Cog=cop