UPSB v3 Archive | Cheap Pen Mods

Ishihara

Date: Fri, Dec 28 2007 04:59:41

I can't speak English very well, i hope you all understand (There's a lot of pictures).

Cheap Pen Mod Tutorial
Doing a cheap Mod with home itens

KuBIC (BIC Pen)

Materials Used: A BIC Pen, anything to put in
-Optional: Grip
COG: At COP
Length: 14,9cm
Weight: Normal

Take any BIC pen you have... I use a blue BIC pen with a red back plug.

-1.
Remove the ink tube and the back plug.

-2.
Pick up something to put into the pen, i used a Fuse:

Cut off a part of the Ink tube to put your object in, just like me.

This is the Result:

-3.
Now i'll verify the COG of my pen:

The fuse is lighter than the cap, i didn't break the clip, but if you wanna try... Ok!

-4 (Optional).
Pick up a grip you have at home and put it at the back of the pen:

Kuppen (Any Pen)

Materials used: Normal pen, Color pen
COG: At COP
Length: Min: 18,5 ~ Max: 25,7cm
Weight: Equilibrated
Here in Brazil these color pens are called Hidrographic Pen or Color Pen, sorry.

You'll pick up any pen, ANY... But it should be thin enough to fit the color pens caps.

Mine is from a The Faculty of Law of Cuiaba!

About the color pens: you can use any if it fit in the pen.

I used Faber Castel color pen
I also used these color pens, even cheaper than Faber Castel ones

-1.
Same from BIC pen, remove the ink tube, there's no need to remove the back plug.
Now fit the color pen caps into each side of the pen.

-2.
This is the end, lol. It took me just 15 seconds to do this pen, that is good enough for any trick =3

Mine pen have one more cap at each side of it

Well, here's a cheap mod you all can do with any pen.
I actually use this pen.
It has 25,7cm and it's very good to do Fingerpass with Left-hand (I'm right handed, but started training with this pen at left hand and now i can do Fingerpass with both hands).