UPSB v3
Approved Tutorials / BicTech
, new mod tutorial
-
Date: Fri, Jan 11 2008 17:33:30
I saw these pentech matisse rollerball pens in my local corner store and thought I'd try them out since the tips looked heavy
Parts Used:
- 2x Pentech Matisse Rollerball Pen Tips
- 1x Bic Round Stic Body (back plus and ink all removed)
- About 17cm length of stick that fits inside both the tips and the round stic body (I used a chopstick)
- Electrical Tape / Teflon Tape to eliminate noise of chopstick and keep tips on tight
- Grips to your liking
1. Here are pics of all the parts used:
2. Cut your stick (I used a chopstick) to length so that when slid through the bic body enough sticks out the ends to fit completely inside the Matisse tips
3. Add teflon tape to the stick where it exits the bic body so that it stays in firmly
4. Once the chopstick is centered in the bic body with the tape keeping it tight, add more teflon to the part sticking out so that the Matisse tips will fit securely.
5. Now add a bit of electrical tape over the join of the tip and the body to make sure it does not come apart. Then add grips over the tape to your liking.
6. Final Product
Length: 20.2 cm
Weight: About equal to 4 unmodded RSVPs, but basically all the weight is at the ends for momentum (This is a guess by holding them both. I will post real weight when I can find an anayltical scale)
CoG = CoP -
Date: Fri, Jan 11 2008 19:25:21
I can't see the pictures. But it's interesting to see a chopstick being used
-
Date: Fri, Jan 11 2008 19:57:32
looks good
-
Date: Fri, Jan 11 2008 19:57:40
Those tips sure look crazy, haha. Seems annoying with the grips this far in though.
-
Date: Fri, Jan 11 2008 22:54:56
If you put those on a comssa body, it would look like a thicker Mitsubishi Pencil Mod.
-
Date: Sun, Nov 2 2008 04:59:12
how are u supposed to infinity with dat.... but everything else is perfect
-
Date: Sun, Nov 2 2008 13:40:52
Very nice mod
It really does look like a jap pencil mod O_o