UPSB v3

Tutorials Pending Approval / anyball retractable v1?! dont know

almost like anyball retractable mx

  1. paz
    Date: Mon, Jan 21 2008 23:12:33

    so, after failing to make an anyball retracable mx, i came up with the "anyball reractable v1."

    i am new so i have no pics so try to understand me.

    pens:

    anyball/ profile retractable
    rsvp


    heres how to make it.

    1. first take your anyball/ profil apart. mechanism, spring, ink, grip.
    2. take the rsvp apart also, back cap, cap, grip, ink
    3. now take the rsvp cap and cut right below the squiglly line, file
    4. now, take the cut rsvp cap, the rsvp grip, and the profile mechanism and put it together.
    5. take the rsvp ink and crimp i think about 6.5 cms
    6. put spring into rsvp barrel and put ink inside
    7. cut the rsvp plastic tip about 3-4 mm
    8. take rsvp back plug and drill hole that rsvp ink goes through.
    9. take toothpick and stick i through ink tube, just try to figure out the length, i sorta threw away my pen
    10. now, after figuirng out corect length, make the end of the toothpick sharp, cut a litle bit ink tube off the profil ink tube,
    11. use long nose plier to close the end of the segment of the profil ink tube.
    12. place the ink tube segment on to the inktube, the length of toopick will take trial an error, i threw my pen away
    13. cut anyball grip till you have eight segments connected together, it should be 1 inch
    14. put grip on the place were the rsvp grip goes on the rsvp pen.
    15. now put the mechanism made, rsvp grip, cut rsvp cap, and mechanism on to the back cap of rsvp

    put insert if want. i dont know y i threw the pen away, so i cant be sure if everything is correct, me dumby bangHead.gif

    please comment, first mod made by myself

    phew unsure.gif

  2. boyboy53
    Date: Mon, Jan 21 2008 23:49:56

    whats it look like?


    ---
    don't quote the post directly above you when it's the only other post in the thread. Extremely long quote removed.
    sketching

  3. pholord
    Date: Tue, Jan 22 2008 00:09:10

    OK so this is just my ARMX without an hgg tip? Yea really good for the first mod you made"by yourself"
    Hey I think Ill take the msxa, take the hgg tip off and call it the msxa v1!!

    Had you done a little more than that, I would have given you a more positive comment.

  4. TEK
    Date: Tue, Jan 22 2008 00:24:30

    Seems like this mod has already been made a while ago in ucpsb by pholord

    http://z15.invisionfree.com/UCPSB/index.php?showtopic=8333

  5. Pearl
    Date: Tue, Jan 22 2008 00:26:14

    Ahahahaha, How could you have failed at making an ARMX XD ?

  6. sketching
    Date: Tue, Jan 22 2008 00:34:57


    @pholord & tek: he already stated that he tried pho's mod, so no need to point out that it exists. tongue.gif

    Yeah, anyway, it seems like you just made a shorter version of the ARMX after failing to make the original. huh.gif
    Thread closed until you post a photo in "Show Your Threads" to prove that it's something different than just a shorter version of the ARMX.