UPSB v3
Tutorials Pending Approval / Sexy HGG Jell Mod
similar to Ayatori mod but with easier to find components
-
Date: Sun, Mar 2 2008 09:01:38
Hello.
.
Many of you have seen pictures of this mod by Gunblakes(my classmate) and me
End result:
Specs:
Length : 20 cm
Weight : 16-17 g
Writable : not this version but its so sexy and u dun really need to write with it.
COP = COG
Materials:
1 x HGG
1 x Hyper Jell / Jimne Jell
1 x G2 upper barrel (the half of the barrel containing the clicker mechanism)
1 x Bic Round Stic barrel
1 x Signo tip
1 x Heavy tip of choice
Grip Cutting Stock Barrel(optional)
Step 1:
Cut the G2 barrel before the kink and after the screw thread so that u get the middle portion(should be around 3 cm)
Step 2:
File the front of the HGG barrel(below the grip) until the G2 barrel fits over even when there's a layer of paper over the barrel
Step 3(optional but that's the whole point):
Put the grips(hgg and over your stock barrel and cut funky designs on it. A stock barrel is a spare barrel that the grip fits tightly over and u can afford to scratch it. Makes precision cutting a lot easier.
Step 4:
Cut a 2.5cm section of the Bic Round Stic barrel
Step 5(IMPT):
Find a nice insert or make your own and blow it up if necessarily such that it is 15 cm long and 3.5 cm wide.
Step 6:
Put some spare HGG grip(~0.8cm) over the front of the HGG barrel, then cut off 3 cm of the insert from the front and put it under the G2 barrel section. Tape your heavy tip onto the G2 barrel section then put one of your funkily cut grips over the G2 barrel section.
Step 7:
Cut 2.5 cm from the back of your insert, put the middle of your insert into the HGG barrel and then take the 2.5 cm piece of insert over the Bic Round Stic barrel section. Put your other funkily cut grip over the back of the HGG barrel and stuff the Bic Round Stic section with the insert taped over it into the grip.
Step 8:
Put the Signo tip into the Hyper Jell/Jimne Jell cap and stuff the end of the HGG barrel into the cap. It should be a tight fit. Cut off the clip and erase the words with normal eraser if you desire.
Step 9:
Take a photo of your new pen, upload it and put it in the show off your pens thread.
Any questions please post below and i will try my best to answer them. -
Date: Sun, Mar 2 2008 13:32:46
I have a question. How do you stuff people under a g2 barrel?
"Step 2:
File the front of the HGG barrel(below the grip) until the G2 barrel fits over even when there's a layer of people over the barrel"
Another question.
Where to get heavy grips??
"Tape your heavy grip onto the G2 barrel section then put one of your funkily cut grips over the G2 barrel section.
"
Lul. I didnt use a bic round stic barrel, i just slid the g2 barrel onto the HGG barrel grip section, such that i could screw on a Pilot Nextage tip onto the Hgg barrel. And the funky grip at the cap is optional, i put an insert instead, but the funky grip at the front is a must! Ayatori mods are just soooo secksy!
-
Date: Sun, Mar 2 2008 13:58:39
lol typos fixed. and i accidentally screwed up the hgg barrel screwthread so i nidded tape. ah well.
-
Date: Sun, Mar 2 2008 20:28:23
Heavy tip of choice, such as what? You said the COG = COP, what if I use a Dr.Shaker tip XD
-
Date: Sun, Mar 2 2008 21:07:07
Add pictures for each step of the tutorial! =D
-
Date: Mon, Mar 3 2008 01:06:40
i really don't see what looks so good about the wierdly cut grips lol
but w/e
friend says they look nice i doin't see how though.. -
Date: Mon, Mar 3 2008 01:57:43
Dr. Grip grip?
-
Date: Mon, Mar 3 2008 08:26:52
my friend used it
-
Date: Mon, Mar 3 2008 08:57:45
i need a pic of each step please??
-
Date: Mon, Mar 3 2008 08:58:58QUOTE (cluu1 @ Mar 2 2008, 08:06 PM) <{POST_SNAPBACK}>i really don't see what looks so good about the wierdly cut grips lol
but w/e
friend says they look nice i doin't see how though..
The funky grips are the true essence of the ayatori mod. Without funky grips, it cant be called an ayatori mod because it loses its meaning.
-
Date: Mon, Mar 24 2008 22:12:46
what does the BIc pen do in this progress, not much difference if you dont have a BIC
-
Date: Tue, Mar 25 2008 14:23:25QUOTE (torune-do @ Mar 25 2008, 06:12 AM) <{POST_SNAPBACK}>what does the BIc pen do in this progress, not much difference if you dont have a BIC
the bic section is to hold the insert in the cap if you want to also put a cut grip in the cap. -
Date: Tue, Mar 25 2008 14:56:00
Meh, i would rather have an authentic ayatori. no offense or anything, its just ive been wantint a real one for forever...
-
Date: Wed, Mar 26 2008 10:11:06
i wish that you make a video tutorial of this mod
-
Date: Thu, May 22 2008 22:17:11
Would another Signo tip be good for "Heavy tip of choice" ?
-
Date: Fri, May 23 2008 03:29:49
Seeing as how you're adding weight to the back with a signo tip, all the signo tip in the front will do is balance out the weight from the back. I'd suggest something like a Dr. Grip pen tip.
-
Date: Fri, May 23 2008 04:19:57
maybe a nextage tip so that you dont have that rim on the tip to deal with
-
Date: Wed, Sep 10 2008 15:10:09
Can you have some pictures please?
What tip do you use?
Is there a sub for the Bic Round Stic?
Is the Bic Round Stic necessary? What happens if I don't use it?
The G2 barrel goes over the HGG grip as well right?QUOTEPut some spare HGG grip(~0.8cm) over the front of the HGG barrel, then cut off 3 cm of the insert from the front and put it under the G2 barrel section. Tape your heavy tip onto the G2 barrel section then put one of your funkily cut grips over the G2 barrel section.
Over the front of the HGG barrel? Which part? before the grip? Before the G2 barrel section?
Sorry but i think it's too vague.. especially without the pictures IMO.
Sounds like a nice mod. But i need to know these stuff before I make one.
Thanks. -
Date: Sat, Sep 13 2008 12:17:08
Tutorial Picture plz
-
Date: Sun, Oct 26 2008 07:25:54
looks nice. how well does it spin?
-
Date: Sat, Nov 1 2008 14:33:34
can i have a clearer version of this tut?
thanks -
Date: Sat, Mar 14 2009 00:41:20
this mod looks really nice, but i don't really understand how to put "heavy tip of choice" onto the front, and i also dont understand the back of the pen. It would really help if someone could post some pics or try to explain it more clearly plz.