UPSB v3

Tutorials Pending Approval / Key3 G-3 Mod

Tutorial

  1. ArchAngel
    Date: Sat, May 3 2008 22:02:56

    http://annkou2.blog105.fc2.com/blog-entry-...html#comment623

    I was wondering if anyone has time to help me translate this tutorial....
    thanks laugh.gif

    EDIT: Oh...when you get to the link....just scroll up...

  2. Dynamik
    Date: Sun, May 4 2008 02:36:49

    babelfish(sp?)

  3. ArchAngel
    Date: Sun, May 4 2008 04:29:40

    QUOTE (Dynamik @ May 3 2008, 09:36 PM) <{POST_SNAPBACK}>
    babelfish(sp?)


    i tried that....but half the stuff i don't understand...
    if i'm not sure 100%, then i won't make it....i'm dirt poor and don't wanna waste pens laugh.gif

  4. Gunblakes
    Date: Sun, May 4 2008 05:01:49

    This mod looks nice! laugh.gif

  5. ArchAngel
    Date: Sun, May 4 2008 05:20:21

    QUOTE (Gunblakes @ May 4 2008, 12:01 AM) <{POST_SNAPBACK}>
    This mod looks nice! laugh.gif


    Ya laugh.gif
    That's why i want to make one cool.gif

  6. BlacknWhite
    Date: Sun, May 4 2008 05:43:10

    Wow... It looks cool... Too bad theres no english translation of it or else i will surely make one...


    Btw, some japanese characters r the same as chinese... I can understand a little only... But sadly, not enough to understand how to make the mod completely...

  7. tomohiro
    Date: Sun, May 4 2008 05:50:48

    i can read but i'm too lazy to retranslate tongue.gif
    but the material you wtill need...
    1 g3( the one with the plastic tip)
    uniball signo( you will need the grip and the tip)
    Hybrid Fine aka hgg( basically only the tips)
    hyperjell

  8. ArchAngel
    Date: Sun, May 4 2008 05:54:21

    QUOTE (tomohiro @ May 4 2008, 01:50 AM) <{POST_SNAPBACK}>
    i can read but i'm too lazy to retranslate tongue.gif
    but the material you wtill need...
    1 g3( the one with the plastic tip)
    uniball signo( you will need the grip and the tip)
    Hybrid Fine aka hgg( basically only the tips)
    hyperjell

    Ya.... laugh.gif that i know...
    i just need to figure out HOW to make one tongue.gif

  9. hknl13
    Date: Sun, May 4 2008 05:58:55

    edit: i tried, my japanese sucks though and my english sucks too, feel free to add for more clarification

    Key3 G3 Mod


    Mod facts
    length: about 20 cm
    weight: about 14 g
    cost: $6.50?

    Parts:
    G-3×1
    signo×1
    HGG×2 (tips only)
    HYPER JELL×1
    Tapliclip×1

    1.
    G-3: completely file down the nubs at the grip

    Use glue etc. to attach the tip of signo on the side the ink comes out of.

    2.
    attach the tip of the hgg on the side with screw threads of the G3 tip.


    part of g3 grip is cut off and put between the clear part to cover it up


    3.
    cut off part of the g3 grip at the part without the threads and attach it to the front of the g3

    when the constructed tip is attached there is a difference in the attachment to the g3
    (otherwise, its not solid)

    However, the problem of this is solved later

    4.
    cut 1cm off the back of the hyper gel grip and slide it down the front of the g3

    slide the signo grip over the entire structure of including the tip thing


    5.
    put the hgg tip into the hyper gel cap first and then slide in the Tapliclip grip


    6. wind tape around the top of the g3 body to hold on the cap tighter to the body

    8. put the cap on

    finished~

  10. TEK
    Date: Sun, May 4 2008 06:18:43

    lol really..
    i think it looks ugly...well thats just me i guess
    ayatori mod looks so much better

  11. ArchAngel
    Date: Sun, May 4 2008 06:21:06

    Thanks a lot man!!!! cool.gif
    But does the G3 used in this mod have the plastic tip or the metal tip? huh.gif

  12. hknl13
    Date: Sun, May 4 2008 06:22:16

    meh, blame ponkotu for the bad color scheme...
    ya, it would look nicer without the bulges though

    plastic tip, which makes this mod good with current g3s

  13. ArchAngel
    Date: Sun, May 4 2008 06:38:03

    So is the COG near the center of barrel?

  14. Tama
    Date: Mon, May 5 2008 03:25:38

    Is it just me or is all Japanese spinners making their own mod and naming it their own name? (Except for RYO) LOL

  15. Baron
    Date: Mon, May 5 2008 03:29:32

    QUOTE (Tama @ May 4 2008, 08:25 PM) <{POST_SNAPBACK}>
    Is it just me or is all Japanese spinners making their own mod and naming it their own name? (Except for RYO) LOL

    Now that you mentioned it, they do.
    Ayatori mod, saizen g3 mod, key3 mod, bonkura kt, g ryzer mod, etc. Wonder why dunno.gif

  16. -JC-
    Date: Mon, May 5 2008 03:29:40

    QUOTE (Tama @ May 4 2008, 11:25 PM) <{POST_SNAPBACK}>
    Is it just me or is all Japanese spinners making their own mod and naming it their own name? (Except for RYO) LOL

    i think it's all teh same mod...but they each just make their own variations of it ^^"' so then they call it 'their' whatever mod..
    like teh ayatori mod isn't a whole new mod..it's jsut a variation of the lakubo mx i think =\

    ryo on the other hand, created a whole new mod that wasn't just a variation...so therefore a new name was needed ^^''

    i believe this is why..nto completely sure though =\
    but it could just be something that they do and that we dont' really do cause if we make a variation of a mod like an mx..we'd call it a mx^2, or mmt, or some other new name wink.gif

  17. CaliMartinio
    Date: Mon, May 5 2008 04:06:36

    Black Cap, Black White Insert, ?Pink Grip? dunno.gif
    he should get another insert to suit the grip happy.gif

  18. Guitrum
    Date: Mon, May 5 2008 04:40:38

    some of the picture links are broken

  19. Dritan Z
    Date: Mon, May 5 2008 04:53:17

    I think this mod is so sexy.

  20. Jamie Enns
    Date: Mon, May 5 2008 04:54:49

    QUOTE (TEK @ May 4 2008, 12:18 AM) <{POST_SNAPBACK}>
    lol really..
    i think it looks ugly...well thats just me i guess
    ayatori mod looks so much better

    haha!
    its all about the spin, not looks tongue.gif
    and i saw a beautiful one the other day on some Japanese guys trade thread

    and these mods weren't given names by the creators, but were given the name for clarification. its not Key3 Mod... its G3 mod: Key3 Specifications

  21. ANBU
    Date: Mon, May 5 2008 05:30:05

    Don't you guys know about google translate?
    Or maybe you pretend to not, but actually you guys using it...
    Yeah, so other ppl think your japanese is good. >_<

    Here you go, from google translate
    Google translate link : Click me

    Name : G-3 Mod (key3's specifications)
    Length : About 20cm
    Weight : approximately 14 grams
    Production Cost : 6.1789 U.S. dollars (google calculator link)

    Material :

    Pilot G3 = 1
    Uniball Signo = 1
    Pentel HGG = 2
    Zebra Hyper Jell (or Zebra Jimnie) = 1
    Zebra Tapliclip = 1


    Step by step toot...

    Oh hell... i'm too lazy to write it down, because i can't copy and paste from the translated page.
    So read the rest of the toot from this link


    - ANBU

  22. tomohiro
    Date: Mon, May 5 2008 05:50:13

    google's translation sucks btw look at this
    First put pen to 4.3 and G-3 split-level portion of the screw can be in the grip of the G-3 Fill- google tranlater... mellow.gif wtf does that mean...
    my translation( i know japanese btw but not good at reading the kangi aka chinese characters...)
    after you screw on the modified g3 cap, secure it with another portion of the g3 grip- done by me... but i think mine is wrong also dry.gif

  23. Rekkuuzan
    Date: Tue, May 6 2008 08:03:58

    When you guys translate, please at least try to keep everything uniform... Being that I find hknl13's translation a bit hard to follow (especially step 2), let's try to make things a little easier to understand perhaps?

    G-3 mod (key3 specifications)



    Name: G-3 mod (key3 specifications)
    Length: Approx. 20 cm
    Weight: Approx. 14 g
    Cost: ï¿¥650 (roughly $6.20 USD)

    Overview of the pen:
    key3 designed this pen for good weight but with its center of gravity (COG) a little off balance. The around and spread trick systems can also be performed easily. [...]*

    Materials:
    G-3 (plastic ver.) x1
    Signo x1
    Hybrid Fine x2 (Hybrid Gel Grip, Yes Hybrid)
    HYPER JELL x1
    Tapli clip x1

    Instructions:
    1. File down the bumps around the grip area of the G-3 completely.

    2. Attach the Signo tip on top of the plastic G-3 tip. Use glue if necessary. Then place one HF (HGG) tip inverted inside the plastic G-3 tip.


    3. Cut the 'ring section' off of the G-3 grip and place it over G-3 tip, covering the transparent part.


    4. Cut the remains of the G-3 grip before the squares then use it to connect the tips onto the front of the G-3 body.


    5. Using around 1 cm of the HYPER JELL grip, slide it onto the G-3.

    6. Now slide your Signo grip on, over the G-3 grips holding the tips together.

    7. There are now 4 grips in total holding the pen in place.


    8. Put the second HF (HGG) tip into the HYPER JELL cap and afterwards the Tapli clip grip.


    9. Wrap tape around the back of the G-3 to add thickness.

    10. Place the HYPER JELL cap onto the G-3.

    And you're done. The last step isn't really of importance, just about how to go on adjusting the pen's COG.

    * By around and spread system, they're referencing to trick families (?) with the Japanese naming system. I'm not too keen with it so I can't say much more. And I don't quite understand what ponkotu was trying to say about the grip, hence the [...].

    Hopefully that should be it. If there's anything to add or change with the instructions or the *, do so.

  24. TEK
    Date: Tue, May 6 2008 08:11:53

    QUOTE (Jamie Enns @ May 5 2008, 12:54 AM) <{POST_SNAPBACK}>
    haha!
    its all about the spin, not looks tongue.gif
    and i saw a beautiful one the other day on some Japanese guys trade thread

    and these mods weren't given names by the creators, but were given the name for clarification. its not Key3 Mod... its G3 mod: Key3 Specifications



    im just saying it because everyone said it looked nice..
    thats all

  25. ANBU
    Date: Tue, May 6 2008 08:13:29

    Wow... nice work Rekkuuzan.

  26. Baron
    Date: Tue, May 6 2008 23:16:23

    Anyone know what a tapli clip is? Photos?

  27. NoRice4U
    Date: Tue, May 6 2008 23:23:24

    QUOTE (Baron @ May 6 2008, 04:16 PM) <{POST_SNAPBACK}>
    Anyone know what a tapli clip is? Photos?


    http://www.shopwritersbloc.com/zebra-tapli-clip-pen.html

  28. Aries
    Date: Tue, May 6 2008 23:47:13

    I agree with Tek, I really think this is a really ugly pen IMO. Looks like it will be hard for U.S. spinners to obtain the parts. You didn't really need a translator, the pictures are explanatory.

  29. tomohiro
    Date: Tue, May 6 2008 23:50:24

    QUOTE (Aries @ May 6 2008, 03:47 PM) <{POST_SNAPBACK}>
    Looks like it will be hard for U.S. spinners to obtain the parts.

    really? huh(1).gif at my town all of these parts are easy to get...

  30. Skybreak
    Date: Sat, Jun 14 2008 19:33:45

    is tapli replaceable using a Lakubo pen?

  31. xxdefinitionxx
    Date: Fri, Jun 20 2008 23:43:52

    QUOTE (tomohiro @ May 6 2008, 04:50 PM) <{POST_SNAPBACK}>
    really? huh(1).gif at my town all of these parts are easy to get...


    same here

    maybe he means that all the parts are difficult to get if u get ur pens at walmart hahahah.gif

    @Skybreak: the tapliclip may be replaceable using a zebra sarasa

  32. Look Into the Sun
    Date: Sat, Jun 21 2008 03:09:06

    QUOTE (xxdefinitionxx @ Jun 20 2008, 04:43 PM) <{POST_SNAPBACK}>
    same here

    maybe he means that all the parts are difficult to get if u get ur pens at walmart hahahah.gif

    @Skybreak: the tapliclip may be replaceable using a zebra sarasa


    Zebra Sarasa's? That? http://www.zebrapen.com/gel-sarasa.html

    Neat, I think I can get those - they look kind of ugly though. Now I just need to get a g3. Oh, I've noticed that college bookstores sell some nice pens sometimes. A bit pricier though.

  33. xxdefinitionxx
    Date: Sat, Jun 21 2008 03:21:57

    QUOTE (Look Into the Sun @ Jun 20 2008, 08:09 PM) <{POST_SNAPBACK}>
    Zebra Sarasa's? That? http://www.zebrapen.com/gel-sarasa.html

    Neat, I think I can get those - they look kind of ugly though. Now I just need to get a g3. Oh, I've noticed that college bookstores sell some nice pens sometimes. A bit pricier though.


    well i'm just saying that out of similarity..i mean i've seen sarasa's and i looked at the picture of the tapliclip...and the grip looks pretty similar..

  34. Look Into the Sun
    Date: Sat, Jun 21 2008 03:24:57

    QUOTE (xxdefinitionxx @ Jun 20 2008, 08:21 PM) <{POST_SNAPBACK}>
    well i'm just saying that out of similarity..i mean i've seen sarasa's and i looked at the picture of the tapliclip...and the grip looks pretty similar..


    You haven't tried it?

  35. iamk34n3
    Date: Sat, Jun 21 2008 03:30:35

    I have a tapli clip, and the grip is nothing like the sarasa. The tapli clips grip starts out wide, then narrows, then widens again. And at the very end of the grip, there are 6 notches in it. This is why I think the tutorial is wrong because if you look at Ponkotu's mod, you can see the notches in the grip after the signo grip.

  36. Look Into the Sun
    Date: Tue, Aug 5 2008 00:12:12

    Hm, there's no measurements on how much of the tip part you need to cut. Anyone know? And is there a (somewhat) good tapliclip sub...?

  37. thnikk
    Date: Tue, Aug 5 2008 00:20:01

    QUOTE (Look Into the Sun @ Aug 4 2008, 04:12 PM) <{POST_SNAPBACK}>
    Hm, there's no measurements on how much of the tip part you need to cut. Anyone know? And is there a (somewhat) good tapliclip sub...?


    http://www.zebrapen.com/ball-jclip.html

    same exact thing

    and zebra eco @ office max

  38. Look Into the Sun
    Date: Tue, Aug 5 2008 00:26:03

    QUOTE (thnikk @ Aug 4 2008, 05:20 PM) <{POST_SNAPBACK}>
    http://www.zebrapen.com/ball-jclip.html

    same exact thing

    and zebra eco @ office max


    Sweet. Thnikk, do you have any? I'll trade/buy one from you at the next gathering. :]

    Do you know anything about the measurements for cutting?

  39. thnikk
    Date: Tue, Aug 5 2008 00:27:49

    QUOTE (Look Into the Sun @ Aug 4 2008, 05:26 PM) <{POST_SNAPBACK}>
    Sweet. Thnikk, do you have any? I'll trade/buy one from you at the next gathering. :]

    Do you know anything about the measurements for cutting?


    yup, got 2 smile.gif

    and no sad.gif i thnikk i just cut right before the grip. using the g-3 you got from nate?

  40. Look Into the Sun
    Date: Tue, Aug 5 2008 01:27:34

    QUOTE (thnikk @ Aug 4 2008, 05:27 PM) <{POST_SNAPBACK}>
    yup, got 2 :)

    and no :( i thnikk i just cut right before the grip. using the g-3 you got from nate?


    Awesome. And yeah, I got the g3 from nate. So I saw off the barrel right before the grip? Which part exactly?

  41. thnikk
    Date: Tue, Aug 5 2008 01:33:12

    QUOTE (Look Into the Sun @ Aug 4 2008, 06:27 PM) <{POST_SNAPBACK}>
    Awesome. And yeah, I got the g3 from nate. So I saw off the barrel right before the grip? Which part exactly?


    lol i love your drawings. no, other side of the grip

  42. Look Into the Sun
    Date: Tue, Aug 5 2008 01:34:10

    QUOTE (thnikk @ Aug 4 2008, 06:33 PM) <{POST_SNAPBACK}>
    lol i love your drawings. no, other side of the grip


    Ah, okay. Thanks. Gonna be hard to cut. I don't have a handsaw.

  43. Sankaku
    Date: Tue, Aug 5 2008 03:41:33

    QUOTE (Look Into the Sun @ Aug 4 2008, 06:34 PM) <{POST_SNAPBACK}>
    Ah, okay. Thanks. Gonna be hard to cut. I don't have a handsaw.

    You can use pliers and cut it with the scissor like thingy. Works on an RSVP, haven't tried it on a G3 yet.

  44. Look Into the Sun
    Date: Tue, Aug 5 2008 03:49:48

    QUOTE (Sankaku @ Aug 4 2008, 08:41 PM) <{POST_SNAPBACK}>
    You can use pliers and cut it with the scissor like thingy. Works on an RSVP, haven't tried it on a G3 yet.


    Thanks, I'll give it a try. I don't want to ruin the g3, it's the only one I have.

  45. Sankaku
    Date: Tue, Aug 5 2008 03:50:56

    QUOTE (Look Into the Sun @ Aug 4 2008, 08:49 PM) <{POST_SNAPBACK}>
    Thanks, I'll give it a try. I don't want to ruin the g3, it's the only one I have.

    Don't do it then, I'm not sure about how durable the plastic is and if it may crack.

    Lol everyone on this page so far has an onionhead for their avatar. biggrin.gif

  46. Look Into the Sun
    Date: Tue, Aug 5 2008 04:13:29

    QUOTE (Sankaku @ Aug 4 2008, 08:50 PM) <{POST_SNAPBACK}>
    Don't do it then, I'm not sure about how durable the plastic is and if it may crack.

    Lol everyone on this page so far has an onionhead for their avatar. biggrin.gif


    Ahh, yeah. Thanks for the warning.

    And lol, you're right.

  47. anythiingla
    Date: Mon, Aug 11 2008 02:08:02

    nice

  48. iMatt
    Date: Mon, Aug 11 2008 03:08:42

    QUOTE (anythiingla @ Aug 10 2008, 09:08 PM) <{POST_SNAPBACK}>
    nice



    Don't revive topics that don't need to be. It's considered spam.

  49. AoD1
    Date: Mon, Aug 11 2008 03:12:10

    QUOTE (iMatt @ Aug 10 2008, 08:08 PM) <{POST_SNAPBACK}>
    Don't revive topics that don't need to be. It's considered spam.


    that little bastard knows imatt.

  50. Owumaro
    Date: Wed, Aug 13 2008 18:24:10

    Is there an other way than tape to hold the Hyperjell cap on the G3 body ?
    Now I have a cloud on my cap.. dry.gif

  51. TEK
    Date: Wed, Aug 13 2008 19:32:11

    QUOTE (Owumaro @ Aug 13 2008, 01:24 PM) <{POST_SNAPBACK}>
    Is there an other way than tape to hold the Hyperjell cap on the G3 body ?
    Now I have a cloud on my cap.. dry.gif


    you need to get the perfect amount of tape so that it says on when spinning...and it doesn't cloud up the cap
    cuz if you use too little...the cap will be loose
    if you use to much...the cap will stretch and it gets cloudy...

  52. Lasse
    Date: Wed, Aug 20 2008 18:31:59

    How long is the Tapli Clip Grip ?

  53. iamk34n3
    Date: Wed, Aug 20 2008 20:56:41

    You only use a section of the tapli clip grip. Most people have subbed it for another grip.

  54. Lawliet
    Date: Mon, Sep 29 2008 23:13:11

    heh funny, it look almost identical to my MX^2 , except for the cap. the front grip and insert are so alike it almost creeps me out mellow.gif

  55. sangara
    Date: Sat, Oct 25 2008 20:45:24

    Wait so what is the grip in the backcap?

  56. k2thez
    Date: Sat, Oct 25 2008 20:47:23

    QUOTE (sangara @ Oct 25 2008, 04:45 PM) <{POST_SNAPBACK}>
    Wait so what is the grip in the backcap?

    I'm pretty sure the tapiclip grip is in the backcap.

  57. sangara
    Date: Sat, Oct 25 2008 20:49:13

    Ok so Signo and Tapiclip on front and Tapiclip in back?

  58. Resonance
    Date: Sat, Oct 25 2008 21:05:46

    QUOTE (sangara @ Oct 25 2008, 10:49 PM) <{POST_SNAPBACK}>
    Ok so Signo and Tapiclip on front and Tapiclip in back?

    No, in front you have a signo grip...

  59. Coolatta
    Date: Sat, Oct 25 2008 21:23:02

    front= 1cm of hyperjell then signo
    back=tapiclip

  60. sangara
    Date: Sat, Oct 25 2008 21:59:01

    QUOTE (Resonance @ Oct 25 2008, 02:05 PM) <{POST_SNAPBACK}>
    No, in front you have a signo grip...


    I said that...

    QUOTE (Coolatta @ Oct 25 2008, 02:23 PM) <{POST_SNAPBACK}>
    front= 1cm of hyperjell then signo
    back=tapiclip


    tyvm happy.gif

  61. iamk34n3
    Date: Sat, Oct 25 2008 23:46:21

    Actually, if you look at the picture:



    You can clearly see a signo grip and then part of the tapliclip grip.

  62. luke
    Date: Sun, Oct 26 2008 02:33:48

    can i sub tapliclip with signo rt?

    http://www.jetpens.com/product_info.php/products_id/472

  63. komas
    Date: Tue, Oct 28 2008 23:44:32

    im having trouble getting the signo grip on. the first time, i broke off the threads for where the g3 tip used to screw on. any tips?
    thank you

  64. -Rae-
    Date: Fri, Nov 14 2008 03:52:42

    does the grip holding the 3 tips hold on to the plastic g3 or the hgg tip? and do we saw off the threads?

  65. spinnerboy01
    Date: Tue, Nov 18 2008 01:48:49

    ineed some g3s
    all awesome mods are g3 mods

  66. REDBLOOD
    Date: Thu, Dec 18 2008 04:08:07

    I need help sliding the grip too. my g-3 treads cracked as well. Tips would be helpful

  67. pongpong
    Date: Wed, Feb 11 2009 08:52:12

    how to get the signo grip on top of the g3 grip, wouldn't it just push the grip backwards. is the g3 grip really necessary?

  68. Asterisk*
    Date: Wed, Feb 11 2009 09:46:21

    The G3 grip is pretty stable, it's pretty hard to remove too.

  69. XternalメDGN
    Date: Fri, Feb 13 2009 10:26:42

    Pictures are dead for me, can anyone reupload them?

  70. dori
    Date: Sun, Mar 8 2009 18:24:03

    wait so... I'm thinking that hyperjell grip behind the signo grip is actually part of the tapiclip grip...
    because in some pics, the grip behind the signo has the dimples of the tapiclip.
    For example, this one:

    http://blog-imgs-24.fc2.com/a/n/n/annkou2/DSCN4194.jpg

    But in any case... how long is the tapiclip grip that is placed inside the hyperjell cap?
    Please help! sad.gif

  71. Stevieboy7
    Date: Tue, Mar 10 2009 00:19:04

    QUOTE (dori @ Mar 8 2009, 01:24 PM) <{POST_SNAPBACK}>
    wait so... I'm thinking that hyperjell grip behind the signo grip is actually part of the tapiclip grip...
    because in some pics, the grip behind the signo has the dimples of the tapiclip.
    For example, this one:

    http://blog-imgs-24.fc2.com/a/n/n/annkou2/DSCN4194.jpg

    But in any case... how long is the tapiclip grip that is placed inside the hyperjell cap?
    Please help! sad.gif

    Hmm.. i think you're a tad confused.
    ill break down the grip structure for yah:

    Front: Signo DX grip, black piece of Tapliclip grip
    Back: HyperJell Grip

    Thats it, thats all folks!
    pretty simple, just like any other g3 mod. The tapliclip can be subbed for a multitude of things, most commonly Signo RT, or Signo Broad grips.

  72. G.lanz
    Date: Tue, Mar 10 2009 00:39:18

    hmm, if anyone has made a writable version, please tell!

  73. dori
    Date: Tue, Mar 10 2009 01:09:12

    QUOTE (Stevieboy7 @ Mar 9 2009, 05:19 PM) <{POST_SNAPBACK}>
    Hmm.. i think you're a tad confused.
    ill break down the grip structure for yah:

    Front: Signo DX grip, black piece of Tapliclip grip
    Back: HyperJell Grip

    Thats it, thats all folks!
    pretty simple, just like any other g3 mod. The tapliclip can be subbed for a multitude of things, most commonly Signo RT, or Signo Broad grips.


    ohh ty so much, stevie! biggrin.gif
    so only 1 cm of tapiclip is used for the entire mod?

  74. komas
    Date: Tue, Mar 10 2009 03:19:47

    if you look at ponkotu's blog, the tapliclip grip is supposed to be in the cap.

  75. TEK
    Date: Tue, Mar 10 2009 05:30:45

    QUOTE (komas @ Mar 9 2009, 10:19 PM) <{POST_SNAPBACK}>
    if you look at ponkotu's blog, the tapliclip grip is supposed to be in the cap.



    yep
    everybody has been making it wrong tongue.gif

  76. dori
    Date: Wed, Mar 11 2009 01:48:41

    QUOTE (TEK @ Mar 9 2009, 10:30 PM) <{POST_SNAPBACK}>
    yep
    everybody has been making it wrong tongue.gif


    D: i thought so!
    so 1 cm of tapiclip next to the DX grip
    and the rest of the tapiclip in the back cap?

  77. PoB621
    Date: Sun, Mar 29 2009 23:02:23

    what's the insert on key3's mod and what's his color scheme?

  78. Samir
    Date: Mon, Mar 30 2009 03:36:31

    QUOTE (PoB621 @ Mar 29 2009, 06:02 PM) <{POST_SNAPBACK}>
    what's the insert on key3's mod and what's his color scheme?


    If I recall correctly, the insert is a gum wrapper and the color scheme is blue grip in the back and pink DX grip in the front with a black tapliclip grip.

  79. blahblahting
    Date: Sat, Dec 12 2009 05:32:52

    there is no way this mod costs $6.20 to make dry.gif but its a nice mod biggrin.gif

    i sold mine but i want to re-make it now tongue.gif

  80. Wind
    Date: Sat, Dec 12 2009 05:36:33

    QUOTE (blahblahting @ Dec 12 2009, 12:32 AM) <{POST_SNAPBACK}>
    there is no way this mod costs $6.20 to make dry.gif but its a nice mod biggrin.gif

    i sold mine but i want to re-make it now tongue.gif

    it cost $6.20 to make because the parts are cheap in japan. >_<

  81. Nation
    Date: Wed, Jan 6 2010 22:18:04

    QUOTE (Samir @ Mar 29 2009, 09:36 PM) <{POST_SNAPBACK}>
    If I recall correctly, the insert is a gum wrapper and the color scheme is blue grip in the back and pink DX grip in the front with a black tapliclip grip.

    Tinted HyperJell (Jimnie Jell)

  82. Magicman
    Date: Sun, Mar 21 2010 08:36:29

    I just received mine and its one of the sexiest mods I've ever seen

  83. M0nst4r
    Date: Wed, Apr 14 2010 02:42:49

    QUOTE (TEK @ May 3 2008, 11:18 PM) <{POST_SNAPBACK}>
    lol really..
    i think it looks ugly...well thats just me i guess
    ayatori mod looks so much better


    i think if u made it it wont be ugly wink.gif