UPSB v3
Approved Tutorials / G.J.H.
Here it is :D
-
Date: Sun, May 25 2008 06:35:16
Hai everyone! Welcome to the G.J.H. Tutorial!
I know a lot of you have been wanting to know how to make a G.J.H., so here you have it! First of all, G.J.H. Stands for G-3, Jedo, Hybrid. The original mod was created by Mr. LSC, so credits to him for creating this mod. Credits also go to Manoik for posting the pics originally on UCPSB cuz i dont have a good g-3 right now for my own pics. I am making a tutorial of how i am 99.9% sure how it's made. ok, so let us begin.
Stats:
COG is pretty much COP
Length: 18 cm
Weight: 16g
Price: around 10USD
-------------------------------------------------------
What You'll Need:
Pilot G-3 http://penwish.com/product_info.php?products_id=673
Jedo (you can also use pentel sharp and staples metrix) http://penwish.com/product_info.php?products_id=658
HGG http://penwish.com/product_info.php?products_id=398
Insert (optional)
-------------------------------------------------------
Step 1.
On your G-3: Screw off tip, take out inktube and back plug, and cut grip and remove
Step 2.
Put grip and tip in cap
Step 3.
cut off top part of g-3 and file off nubs
Step 4.
Put jedo through G-3
Step 5.
use a hot glue gun to glue tips to g-3 (i used tape for easier mp repairing)
Step 6.
place HGG over top G-3 Section
step 7.
wrap tabe around the back of the g3, place cap on back and your done!
Enjoy spinning your new mod!
-
Date: Sun, May 25 2008 06:42:36
You should probably explain the back section a little better (or put pictures), but this seems a lot easier than the original tutorial on UCPSB that involved cutting the jedo metal tip. Nice work :>
-
Date: Sun, May 25 2008 06:44:42
umm wut kind of tape did you use to put the tip on. did you use like teflon?
-
Date: Sun, May 25 2008 06:51:14
i cut a part of electrical tape to thicken tip area and then used regular old crappy scotch tape to connect the tips to the barrel (hope that helped ^-^") and thx K4S, compliment from you means alot. too late to take pics, i'll do it tomorrow =.=
-
Date: Sun, May 25 2008 06:54:10
Wow, you hit the nail right on the head.
http://penspirit.web.fc2.com/intro.html#gjh
The first person I've seen to follow the correct method; on their own.
Note that I said first that I've seen, so don't anyone go on bashing me now saying that they've done it first. -
Date: Sun, May 25 2008 07:53:25
Thanks for the tutorial.
However, I wish the pen was more uniform. I don't like how there is a bulge in HGG grip. -
Date: Sun, May 25 2008 08:55:28QUOTEThe original mod was created by Mr. ILC and I am making a tutorial of how i am 99.9% sure how it's made.ok, so let us begin.
copying pictures from PDS and posting them doesn't exactly mean that you've made the tutorial. if your going to copy the pic from PDS, at least give them fucking credit for it. oh and btw, you FAILED because you didn't read the part 2 of the tutorial.
-
Date: Sun, May 25 2008 09:09:17
as K4S said, looks easier than the tut in UCPSB
thanks d00d i wuv this mod :] -
Date: Sun, May 25 2008 09:28:20
God +++ It's so lnW
-
Date: Sun, May 25 2008 14:07:34QUOTE (WhiteFang @ May 25 2008, 03:55 AM) <{POST_SNAPBACK}> copying pictures from PDS and posting them doesn't exactly mean that you've made the tutorial. if your going to copy the pic from PDS, at least give them fucking credit for it. oh and btw, you FAILED because you didn't read the part 2 of the tutorial.
Who said he copied the pictures? They look like the normal angle and stuff that thnikk takes them at. and because he didnt read the 2nd part of the tut means he failed? Okay.
@thnikk: Nice job on the Tut! i'll make it when i get home =] -
Date: Sun, May 25 2008 14:14:29
The original method involved the cutting of tips + hot glue gun. I didn't feel like making a tut on a MUCH easier variation, but since a kinda useless tut is posted here, I might as well contribute my variation here. Take a short length of a G2 Refill, file the insides of the G3 barrel (tip-side) with sandpaper/needle file until the G2 refill fits in. Screw the Jedo tip onto the G2 Refill, voila done. It makes the tube even more stable, and the lead is less prone to breaking. Secure the tip with scotch tape. Much simpler then using a hot glue gun. I don't see how making a tut and calling it your "own tut" while not even using your own pictures is right. Btw its not Mr. ILC, its LSC.
-
Date: Sun, May 25 2008 14:14:32
This is copied from PDS..?
-
Date: Sun, May 25 2008 14:18:14
geez, i found them on ucpsb. i'll retake pics just for all of you.
-
Date: Sun, May 25 2008 14:18:25QUOTE (nolan @ May 25 2008, 09:07 AM) <{POST_SNAPBACK}>Who said he copied the pictures? They look like the normal angle and stuff that thnikk takes them at. and because he didnt read the 2nd part of the tut means he failed? Okay.
@thnikk: Nice job on the Tut! i'll make it when i get home =]
Hi nolan, take a look at the color of the G3 grips in the tut and the final product. No link? The pics are 100% copied, the tutorial is quite obvious to figure out using common sense. Thats the only credit Thnikk gets. -
Date: Sun, May 25 2008 14:25:20
I believe Maniok posted this tutorial in UCPSB
-
Date: Sun, May 25 2008 16:57:07
Sweett! Thanks a bunch!
Time to make myself a GJH! So much easier than cutting the jedo tip... -
Date: Sun, May 25 2008 17:09:51QUOTE (WhiteFang @ May 25 2008, 02:55 AM) <{POST_SNAPBACK}> copying pictures from PDS and posting them doesn't exactly mean that you've made the tutorial. if your going to copy the pic from PDS, at least give them fucking credit for it. oh and btw, you FAILED because you didn't read the part 2 of the tutorial.
1.) Whitefang..your a dick. Case stands.
2.) Remember, read my guidelines on tutorial making if you want to do it properly
http://www.upsb.info/forum/index.php?showtopic=6572
This is how i made the mod awhile back off of UCPSB, its not bad at all, but i'll need to pick up an official pendolsa G.J.H. and reverse engineer it. NO copyright on that one -
Date: Sun, May 25 2008 17:41:50
Are you sure it's 18.5 cm? That's how long an MX is, and I compared my G.J.H. with an MX and the G.J.H. was shorter by at least 1 centimeter.
-
Date: Sun, May 25 2008 17:51:54
Hmmmm... Its look fantastic
Soon ill buying on penwish, so i'll buy these pens too -
Date: Sun, May 25 2008 18:12:40
Mine was 17.5cm
am i supposed to do anything to give it that 1cm im missing cause it feels short -
Date: Sun, May 25 2008 20:01:32
1 sec, im gonna recheck on iRuler
I got 18
-
Date: Mon, May 26 2008 07:33:17QUOTE (Thnikk @ May 26 2008, 12:18 AM) <{POST_SNAPBACK}>geez, i found them on ucpsb. i'll retake pics just for all of you.
oh. i'm so sorry for the misunderstanding.
i didn't realise that it was post on UCPSB before. but the credit still shouldn't be to Manoik, it should be to PDS. (or both)QUOTEWho said he copied the pictures?
umm..me?QUOTEand because he didnt read the 2nd part of the tut means he failed? Okay.
i meant as in 'failed to fully copy the tuts from PDS.' i didn't realise that it just got the pictures from the UCPSB. (which i am truly sorry about..)QUOTE1.) Whitefang..your a dick. Case stands.
why am i a dick again? because that i said the pictures are copied from PDS? am i wrong to say that? the pictures are actually still from PDS even if Manoik posted it in UCPSB or not. and there was no credit given to anyone for that picture when i posted my post and he made it sound like the tutorial was all done by him. -
Date: Mon, May 26 2008 08:35:21
sweet!
im only left with the Jedo..(missing Jedo..)
lol. -
Date: Mon, May 26 2008 16:14:40
PDS made a tutorial? i didn't even know that
-
Date: Tue, May 27 2008 06:36:47
yes. the pictures are from PDS and manoik prabably got the pics from PDS..
-
Date: Tue, May 27 2008 06:48:41
Please stay on topic. This is about the mod, not about who took the pictures.
I am going to make this and hopefully it'll turn out well. The only thing I need to get is a hot glue gun. -
Date: Tue, May 27 2008 07:27:49
I prefer to use crazy glue for attaching the jedo tip to the front of the G3. Hot glue can get messy and make a bump under the HGG grip (like all the ones PDS is selling....). After using the crazy glue, I sand it down to get it uniform with the rest of the G3 part where the grip goes.
-
Date: Tue, May 27 2008 07:37:18
whoa...nice...i hope i can get jedo and g3...^^!
-
Date: Sun, Jun 1 2008 09:54:00
this is cool! finally found this tutorial.
-
Date: Sun, Jun 8 2008 05:59:30
Just did one... 17.7cm... Thats quite short... But still i like the weight
-
Date: Sun, Jun 8 2008 07:43:21
that dusnt look very balanced
-
Date: Sun, Jun 8 2008 12:35:51QUOTE (Lonefang @ Jun 8 2008, 03:43 PM) <{POST_SNAPBACK}>that dusnt look very balanced
It is balanced... the weight of the mechanical pencil part is heavier at the front so it adds aditional weight to the front, thus making it balanced -
Date: Sun, Jun 8 2008 15:51:19
if you want, you can add a third tip to the front
-
Date: Fri, Jun 13 2008 23:14:39
i just cut the backs of rsvp and hgg grips(bump) and put it behind the hgg and put 4 tips, lol
-
Date: Sat, Jun 14 2008 03:30:50
Do want.
-
Date: Sat, Jun 14 2008 03:59:08
I don't quite understand the part with the tip; do you glue another tip on the tipside? Or am I mistaken?
-
Date: Sat, Jun 14 2008 04:36:24
You cut the G3, then put the jedo mechanism with inside the G3. You then hotglue the tip onto the body and put a HGG tip on top of that.
-
Date: Sun, Jun 15 2008 01:52:33QUOTE (iamk34n3 @ Jun 13 2008, 11:36 PM) <{POST_SNAPBACK}>You cut the G3, then put the jedo mechanism with inside the G3. You then hotglue the tip onto the body and put a HGG tip on top of that.
Alright, thanks for clearing that up
But in the picture with the completed GJH, there isn't the little extension of the jedo tip where the lead comes out
Does his second HGG tip cover that up? -
Date: Sun, Jun 15 2008 02:04:19
The tip goes over the pointy part so it doesn't poke you while spinning
-
Date: Sun, Jun 15 2008 02:57:56
you can leave the tip out a bit if you want more stability when writing but i prefer that it is not for spinning
-
Date: Sun, Jun 15 2008 03:24:58
I guess I'll leave the tip out a bit for writing
Looks like this would be good for school, but how is the lead survival rate through drops?
BTW does anyone know where I can get a metal-tipped G3? Anywhere but PDS!
EDIT: Used PDS as a generality for "online store"....plus I heard its not very reliable -
Date: Sun, Jun 15 2008 03:44:45
if you use a hot glue gun then the lead wont break as much
and g-3s http://penwish.com/product_info.php?manufa...products_id=674 -
Date: Sun, Jun 15 2008 07:34:48QUOTE (falseparadox @ Jun 14 2008, 08:24 PM) <{POST_SNAPBACK}>I guess I'll leave the tip out a bit for writing
Looks like this would be good for school, but how is the lead survival rate through drops?
BTW does anyone know where I can get a metal-tipped G3? Anywhere but PDS!
You can get metal tipped G3's at Penwish. -
Date: Sun, Jun 15 2008 18:05:39QUOTE (iamk34n3 @ Jun 15 2008, 12:34 AM) <{POST_SNAPBACK}>You can get metal tipped G3's at Penwish.
i likepenwish more than pds anyway. pendolsa doesnt even sell g-3s tho O.o -
Date: Mon, Jun 16 2008 04:53:22
Go Thnikk go! Awesome mod. Awesome Tutorial.
-
Date: Mon, Jun 16 2008 21:31:03
Is there any actual, physical store in the US where I can get them?
-
Date: Mon, Jun 16 2008 21:56:35QUOTE (falseparadox @ Jun 16 2008, 02:31 PM) <{POST_SNAPBACK}>Is there any actual, physical store in the US where I can get them?
doubt it.
-
Date: Tue, Jul 15 2008 08:30:36
if I use a hotglue, could it happen that I make the restractable mod unuseless?
-
Date: Tue, Jul 15 2008 08:40:38
you just need a bit of hotglue in front of the jedo tip
awsome tut wow -
Date: Fri, Jul 18 2008 22:52:19
@ doctor spin- im not quite sure what you are asking. and okly, I would reccoment not gluing the tip, actually. teflon tape woks better for the tips but you should glue the mech to the g-3 for sure.
-
Date: Wed, Jul 30 2008 20:03:48
I have a problem with the cap.
The body doesnt hold in the cap. It always flys away while spinning
What can I do? -
Date: Wed, Jul 30 2008 20:05:03QUOTE (Panda @ Jul 30 2008, 03:03 PM) <{POST_SNAPBACK}>I have a problem with the cap.
The body doesnt hold in the cap. It always flys away while spinning
What can I do?
wrap tape around the part of the body that holds onto the cap or put a grip in between the two. -
Date: Sat, Sep 20 2008 20:43:10
I could just use teflon instead of hot glue when putting on the HGG tip right? It won't affect the balance? And, can I replace the G3 grip with and HGG grip or RSVP grip, or will it not hold or fit the mech or is it too loose?
-
Date: Sat, Sep 20 2008 21:44:28
Yeah I'm pretty sure teflon won't affect it that much. The cap is held on by the tape on the g3 barrel so whatever grip you use in the cap is fine.
-
Date: Sun, Sep 21 2008 21:16:43QUOTE (iamk34n3 @ Sep 20 2008, 01:44 PM) <{POST_SNAPBACK}>Yeah I'm pretty sure teflon won't affect it that much. The cap is held on by the tape on the g3 barrel so whatever griip you use in the cap is fine.
yeah. and teflon works better for the hgg tip anyway (then you can take the tip off if the mod breaks) -
Date: Mon, Sep 22 2008 21:25:13
pretty nice how it's really clean because theres not much to make a mess of
-
Date: Wed, Nov 12 2008 08:47:19
I've heard that 13 cm of scotch tape wrapped around the back side of the G3 barrel is perfect, and if you cut it length-wise to just the perfect height, then the G3 cap will cover the tape perfectly. Just what I've heard though, you might want to try it yourself.
-
Date: Fri, Nov 14 2008 03:35:40
just wonderin...
this mod has no eraser right?
u clix the cap for lead to come out? -
Date: Fri, Nov 14 2008 03:41:31
This mod has the original eraser used in the Jedo.
You actually remove the cap then click down the lead tube.
Edit: Spelling -___- -
Date: Fri, Nov 14 2008 03:43:15
how do u get the g3 backplug off then -
Date: Fri, Nov 14 2008 03:53:20QUOTE (Ramen @ Nov 13 2008, 11:43 PM) <{POST_SNAPBACK}>
how do u get the g3 backplug off then
U get it off With An Rsvp inktube
-
Date: Fri, Nov 14 2008 03:57:56
Yep.
Dont worry if the inktube bends like crazy lol..
Just push hard and trust that the inktube wont break. -
Date: Fri, Nov 14 2008 06:41:07
It's really easy to take out with an hgg inktube.
-
Date: Sun, Mar 29 2009 16:53:27QUOTE (Thnikk @ May 24 2008, 11:35 PM) <{POST_SNAPBACK}>COG is pretty much COP
I really want to make this mod.
but does anyone know specifically where the COP is?
Like more front heavy or back heavy, like an mx?QUOTE (Thnikk @ May 24 2008, 11:35 PM) <{POST_SNAPBACK}>
Spoiler:
and does the jedo tip retract back in, so it's not as pointy?
because in the picture, the tip part is gone.
edit:
sry for all the questions,
i just really hope they get answered, because i really want to make this mod.
-
Date: Sun, Mar 29 2009 16:56:58
ummmm im pretty sure that the tip does not retract, he either cut it, or made it so that the HGG tip was able to cover up the pointy part
-
Date: Sun, Mar 29 2009 17:01:57
Yeaa thats what i was thinking too :\
just wanted to make sure haha
thanks~~
i still need to know the specific COG though :[ -
Date: Sun, Mar 29 2009 17:13:11
well, im waiting for my package to arrive to make one, when i do, ill get back to you ^^
-
Date: Thu, Apr 2 2009 12:16:43
i really want 2 make 1 now
-
Date: Thu, Apr 2 2009 12:33:03
I made one but the jedo tip kept falling to pieces
-
Date: Wed, May 5 2010 13:43:11
i just make one and fell this mod feels so short and a little bit heavy i think i will use it more to write
-
Date: Wed, May 5 2010 19:59:53QUOTE (sarugio1 @ May 5 2010, 07:43 AM) <{POST_SNAPBACK}>i just make one and fell this mod feels so short and a little bit heavy i think i will use it more to write
stop fucking spamming -
Date: Tue, Jun 22 2010 08:31:22
there is 2 tips jedo and hgg in the front or only jedo?
-
Date: Tue, Jun 22 2010 08:47:26
Jedo and HGG. You glue the HGG tip on top of the Jedo tip.