UPSB v3

Tutorials Pending Approval / m-pictoy

new pen??

  1. Tain
    Date: Fri, Jun 27 2008 01:38:46

    i was messing around with the craploads of bictorys i have, and had a sweet idea!! and this is what i ended up with.

    sorry about the vid, i know its bad >.< just showing both sides work
    its basically a bictory with one side as a mechanical pencil... if someone else has already made this, im not trying to steal it, just give me a link...

  2. tomohiro
    Date: Fri, Jun 27 2008 01:41:24

    mellow.gif that's very cool
    one side is a pen and one side is a mech pencil...
    and both of them actually work too

  3. Outlander
    Date: Fri, Jun 27 2008 02:02:00

    Pretty nice!

    What mechanical pencil did you use inside the bic body?

  4. iamk34n3
    Date: Fri, Jun 27 2008 02:03:07

    Lemme guess...you used a bic mp for the mechanism? But really nice btw.

  5. TEK
    Date: Fri, Jun 27 2008 02:27:45

    really cool man
    the ink seems to have a bit of a problem but its ok
    how are you able to put the lead in tho?

  6. Kuma
    Date: Fri, Jun 27 2008 02:45:33

    nice

    i made 1 with a metalic bictory that pushes the tip instead

  7. pholord
    Date: Fri, Jun 27 2008 03:45:36

    Not bad but unless you turn this into a tut real soon this will get merged with "show off your pens" or get locked

  8. Tain
    Date: Fri, Jun 27 2008 04:56:21

    QUOTE (iamk34n3 @ Jun 26 2008, 09:03 PM) <{POST_SNAPBACK}>
    Lemme guess...you used a bic mp for the mechanism? But really nice btw.

    it was some sort of paper mate, you can see in the tut im putting in here

    QUOTE (TEK @ Jun 26 2008, 09:27 PM) <{POST_SNAPBACK}>
    really cool man
    the ink seems to have a bit of a problem but its ok
    how are you able to put the lead in tho?

    thats because the pen costs a nickel, some sort of cheap bic,,,
    to add led, push the pen back, and push it in the front


    here is a tut i guess if you need one


    materials:
    bic pen (or something simalar)
    papermate mechanical pencil
    extra bic cap
    scissors
    super glue
    dremel tool
    one: take apart both the bic pen, and papermate pencil
    two: cut the pen ink tube, right before the ink
    three: cut the pencil tube, so that the legth adds up to about the lenght of the pen barrel.
    four:unscrew the cap of the pen, and slide the pencil barrel into the pen, just so the ridges are barely in the tube.
    five: put glue around the rim, and wait for it to dry
    six: screw the pencil cap on
    seven: file down the plastic tip of the pen, so it can slide through the barrel
    eight: slide the pen in the other end of the pen
    nine: file the caps, and add grips if desired

    if you have any questions, i can upload a video for you guys

  9. TEK
    Date: Fri, Jun 27 2008 05:31:07

    excellent tut tongue.gif

  10. Outlander
    Date: Fri, Jun 27 2008 13:12:42

    Seems easy enough lol.

    Very nice job.

  11. soulsonic
    Date: Sat, Jun 28 2008 00:00:40

    cool pen! pencil one end and pen other, i might try this out. goodjob!

  12. TheSpinner 3.5
    Date: Sat, Jun 28 2008 01:42:39

    I had an idea for this

    darn I was too late

  13. LoneFang
    Date: Sat, Jun 28 2008 01:45:27

    nice mod... can u upload a tut?

  14. Tain
    Date: Sat, Jun 28 2008 06:14:40

    QUOTE (LoneFang @ Jun 27 2008, 08:45 PM) <{POST_SNAPBACK}>
    nice mod... can u upload a tut?

    sure just for you!



    sry bout the quality sad.gif

  15. BlacknWhite
    Date: Sat, Jun 28 2008 10:59:31

    Nice one! But gimme the name of the mech pencil ok?

  16. Tain
    Date: Sat, Jun 28 2008 12:53:47

    QUOTE (BlacknWhite @ Jun 28 2008, 05:59 AM) <{POST_SNAPBACK}>
    Nice one! But gimme the name of the mech pencil ok?

    here is the exact mechanical pencil i used...

    papermate write bros. mechanical pencil
    http://www.papermate.com/sanford/consumer/...tnavbrand.jhtml

  17. soulsonic
    Date: Tue, Jul 1 2008 05:36:08

    cool mod, will the ink leak after spinning a few times since you cut it so close?? and will the led go into the intube ??

  18. Tain
    Date: Tue, Jul 1 2008 18:37:04

    QUOTE (soulsonic @ Jul 1 2008, 12:36 AM) <{POST_SNAPBACK}>
    cool mod, will the ink leak after spinning a few times since you cut it so close?? and will the led go into the intube ??


    i doubt it, but if you are worried, you can put some glue or something at the ends for safety

    but no problems for me yet!

  19. iSpin
    Date: Fri, Oct 10 2008 20:32:07

    Any sub for a dremel?? huh.gif

  20. Loanshark
    Date: Thu, Oct 16 2008 09:43:05

    QUOTE (iSpin @ Oct 10 2008, 04:32 PM) <{POST_SNAPBACK}>
    Any sub for a dremel?? huh.gif


    X-acto knife
    Utility Knife


    Lol, I made something kinda similar to this a few days ago.

    It uses the same 2 pens for this mod and: RSVP, P207 tip, any type of grip (Profile)

    Anyways, this is a real nice mod thumb.gif Pen on one side and pencil on the other