UPSB v3
Approved Tutorials / mp mx
Alternate to TEK's MP MX
-
Date: Fri, Jul 25 2008 23:54:55
credit to TEK for like the whole pen.
1. This pen requires alot of sanding.
2. Mess around with it share your knowledge pah-lease.
3. I dont have measurements. I'm workin on getting them.
4. I wrote this extremely quick.
5. Got questions ill try and answer em.
6. be careful kids.
7. first tutorial help me out.
COG: same as MX
Length: 18.5cm
Weight: Rsvp MX=Rsvp MX MP
Style: single sided mp.
pens needed:
Pentel RSVP (1) MED. point works the best
Pentel Hybrid Gel Grip (1)
pilot g2 mechanical pencil(1)
shaker mechanical pencil lead tube(or similar tube)(1)
final product
step 1.disassembly thats all the parts you need from the four pens
step 2. cut the rsvp
depending on the rsvp bore out the center with some form of sharp object
(i used a 9/64ths Phillips screw driver)
step 3. cut the g2(it should be shorter in the end adjust it according to the rsvp cut)
step 4. sand down the g2 tip so that the hgg tip fits over top the pencil point should be right at the end and sand down the outter rim of the screw threads so its flush with the body.
step 5. tape the g2 to the rsvp
step 6. connect the two lead tubes(use a toothpick)
step 7. put in the lead tube screw on the g2 tip and put on the hgg tip
step 8. throw on the hgg grip
step 9. drill out the rsvp back cap and shave off the two ridges and put it on the rsvp
step 10. put the rsvp grip all the way in the back of the cap and jam the hgg back plug into the grip
step 11. slowly cut and adjust the lead tube until the cap sits perfectly over the rsvp back cap. before
done. -
Date: Sat, Jul 26 2008 00:00:04
Awesomely awesome to the max times 10 to the 23rd!!!!!!
-
Date: Sat, Jul 26 2008 00:23:19
Are there any other mechanical pencils that this could work with?
-
Date: Sat, Jul 26 2008 00:25:32
Great job
can`t wait to make one
just gotta get some G2 MP`s -
Date: Sat, Jul 26 2008 00:38:45
you can do it with a super grip too
but you live in the U.S. you can probably find g2 mechs no problem -
Date: Sat, Jul 26 2008 00:39:35
This is a nice alternative to barrel cutting. I'd recommend a name change, TEK already has the official MP MX. This seems like a variations, but still very nice
-
Date: Sat, Jul 26 2008 00:43:22
You still need to cut the barrels. what else should i name it? Its an mp mx theres no going around it.
-
Date: Sat, Jul 26 2008 00:54:34
^ Lol Yea well atleast ADD did it with something thats easy to find like almost everywhere not some random pencil that like ive never seen anywhere...
-
Date: Sat, Jul 26 2008 01:33:18
in all fairness TEK invented the technique of cutting the rsvp "tip" and replacing it with the mp tip and adam simply found a sub for tthe mp. it was bound to happen sooner or later. buying pens/pencils online or thru the mail just sucks. its way easier to find a sub at a local store. adam's sub is more widely distributed but requires much more work to make.
-
Date: Sat, Jul 26 2008 02:14:33
all the rulers i have are ones with inches no centimeters
-
Date: Sat, Jul 26 2008 02:31:22
Looks gooood.
just needa get my hands on some G2 Mp's
-
Date: Sat, Jul 26 2008 02:50:12
can you please credit please instead of just putting "sorry tek"
and its good that the g2 mp works.
and id like to say thank you k4s for waiting on the release of your mp mx until i got the same amount of money i spent on those msp's. -
Date: Sat, Jul 26 2008 02:53:23
credited and i have no clue what you meant on that second half of it but dope rims son.
-
Date: Sat, Jul 26 2008 03:06:38QUOTE (Adam_ADD @ Jul 25 2008, 10:53 PM) <{POST_SNAPBACK}>credited and i have no clue what you meant on that second half of it but dope rims son.
k4s was going to make a tut on his version
but he saw that i needed to sell those msp...he said he would wait. -
Date: Sat, Jul 26 2008 04:38:11
great sub dawg
and it was bound to happen. give credit where credit is due so gj tek on ingenious rsvp tip cut. but this is probably gonna spawn a whole family of different sub testing that people can use that they can easily get a hold of.
and as much as you want this to be business, profit and glory... share the wealth. ya dig? its about the love of penspinning and efficient mods.
good shit both of ya -
Date: Sat, Jul 26 2008 04:41:09QUOTE (RandomNewb @ Jul 26 2008, 12:38 AM) <{POST_SNAPBACK}>great sub dawg
and it was bound to happen. give credit where credit is due so gj tek on ingenious rsvp tip cut. but this is probably gonna spawn a whole family of different sub testing that people can use that they can easily get a hold of.
and as much as you want this to be business, profit and glory... share the wealth. ya dig? its about the love of penspinning and efficient mods.
good shit both of ya
what do ya mean by share the wealth...i pretty much shared everything with you guys ya dig o.O -
Date: Sat, Jul 26 2008 06:16:50
nice job dude...
although i do remember talking about this to TEK b4 and he just said do what you want...doesn't really matter though it was gonna happen sooner or later
although i do kinda feel strongly against you making a brand new thread for this cuz it's basically the same as the one released by TEK...i mean there are tons of MPs that you could use for MPMX...it was mostly just HOW you would make it an mp w/o changing the look...
TEK deserves like MILLIONS of times more credit than he is getting for this....
you're taking the fact that he was releasing the method for making the MPMX that most of us didn't have a clue about how to do before he made that video, which i have just realized to be kinda unfair for TEK... -
Date: Sat, Jul 26 2008 06:42:06
Tried this a few minutes ago. The main problem is that it's not durable. Just taping the two segments together isnt enough. I mean, I take the grip off, and the whole shit comes out haha. I think it's my sanding, buhh idk. Nice pen thoo.
-
Date: Sat, Jul 26 2008 13:44:34
try using packaging tape i used scotch tape for the first like testing day it held up somewhat ok but like you said the whole front end came off. again credit to TEK for that idea.
oh and it is share the wealth peace love and pen spinning. if no one knows where to buy the pens then we can't share the wealth. p.s. tek just mod them your self and sell em already modded people will buy them. -
Date: Sat, Jul 26 2008 20:39:42
mm... ima wait until some1 ELSE makes this successful...
-
Date: Tue, Jul 29 2008 20:18:25
I'll make this as soon as theres measurements
-
Date: Thu, Jul 31 2008 22:46:13
i just finished makeing it and im spinning it right now and its awsome! nice mod! i really like it. ive been spinning it for a good 10min now and its just alittle heavyer than a normal mx but everything is the same! cog same length same. the only thing thats different is its a mechanical pencil!!!
-
Date: Thu, Jul 31 2008 22:53:43
thats awesome cadayday. what did everybody use to sand down their G2 MP tips? sandpaper, file, something else? what's fastest and easiest to do?
-
Date: Fri, Aug 1 2008 07:08:13QUOTE (sailorboy24 @ Jul 31 2008, 03:53 PM) <{POST_SNAPBACK}>thats awesome cadayday. what did everybody use to sand down their G2 MP tips? sandpaper, file, something else? what's fastest and easiest to do?
edge of my desk with sandpaper on it and rubbed the tip attached to the body on the sandpaper
~note instead of the dr.grip pencil use a papermate pen inktube. the ones that come in the 10 pack or w.e
and adam ill help answer questions if you want because i have this mod down even if you mess up on it :3 -
Date: Fri, Aug 1 2008 15:31:30QUOTE (Cadayday @ Aug 1 2008, 02:08 AM) <{POST_SNAPBACK}>edge of my desk with sandpaper on it and rubbed the tip attached to the body on the sandpaper
~note instead of the dr.grip pencil use a papermate pen inktube. the ones that come in the 10 pack or w.e
and adam ill help answer questions if you want because i have this mod down even if you mess up on it :3
Wat are the measurements of how much you should cut the rsvp tip and how much you should cut the G2 mech pencil? -
Date: Sun, Aug 3 2008 20:06:07
Ok, I just got my one and only G2 MP. How do I remove the pencil mechanism from the barrel? I don't want to risk breaking it or anything.
-
Date: Mon, Aug 4 2008 01:08:13
screw off the tip, take it out
-
Date: Mon, Aug 4 2008 01:15:58
I can't, it's stuck.
-
Date: Mon, Aug 4 2008 01:44:27
the eraser part holds the pencil all together tug harder it shouldn't break and be careful with the lead...
oh and i've noticed a problem with the rsvp bodies the front half may be too thick to get the pencil part through.
i just used a 9/64th inch screwdriver to open it up. -
Date: Mon, Aug 4 2008 03:04:14
Oh, lol. I got it out now, but...
QUOTE (Santa @ Aug 1 2008, 11:31 AM) <{POST_SNAPBACK}>Wat are the measurements of how much you should cut the rsvp tip and how much you should cut the G2 mech pencil?
-
Date: Mon, Aug 4 2008 11:10:07
they way i cut my g2 was cut it put the hgg grip on the g2 put it to the spot where you want it to be at
then cut the rsvp lol it worked and it was still weighted the same -
Date: Tue, Aug 5 2008 04:18:57
i finally got all the stuff, but the g2 mechanical pencil part wont fit through the rsvp front part... this is so gay (btw im using a mini g2 mech pencil; does that make any difference?)
-
Date: Tue, Aug 5 2008 04:19:59
he bore it out, to make it fit...
-
Date: Tue, Aug 5 2008 04:22:39
wat do u mean by "bore it out"?
-
Date: Tue, Aug 5 2008 04:23:09QUOTE (CPM8 @ Aug 4 2008, 09:19 PM) <{POST_SNAPBACK}>he bore it out, to make it fit...
Use a drill bit to widen it. You don't need the drill, just the bit. And you can use a rubber band to get a better grip on the bit. -
Date: Tue, Aug 5 2008 21:54:52
damnit now i officially can say that i fail at modding
-
Date: Wed, Aug 6 2008 21:27:39
for the lead tube is there only dr.grip?
-
Date: Wed, Aug 6 2008 21:54:06
the past two mps that i made i used rsvp ink tubes
-
Date: Sun, Aug 10 2008 02:23:22
thx alot for u tut... very good!
-
Date: Wed, Aug 27 2008 00:47:22
anyone know if it makes a difference if you use a G2 mini mp? santa had problems anyone else?
-
Date: Wed, Aug 27 2008 00:57:13
I guess the Lead tube is smaller right?
-
Date: Wed, Aug 27 2008 22:26:00
oh ok. i'll try it with those and give some input later then. thanks.
-
Date: Thu, Aug 28 2008 01:07:48QUOTE (Mr.Squekers @ Aug 26 2008, 05:57 PM) <{POST_SNAPBACK}>I guess the Lead tube is smaller right?
I think the lead tube is just shorter, not 'smaller'. (not sure what you meant by that)
If you meant thinner, it would hold less lead, which would be bad for an mp (especially since it already has a standard to compare to, the G2 mp regular), so I dont think its any thinner than the regular.
Besides, I dont think it can get any thinner; otherwise it would be too frail to hold lead and give the lead room to move freely. xD -
Date: Thu, Aug 28 2008 01:44:29
can u use mini g2 mech pencil o.O i think its the same seeing that ur just using the front part of pencil, but i dont wanna make this wrong ;P so... yeah
-
Date: Thu, Aug 28 2008 01:58:42
If it is the same mechanism then yes it should work, you just have to have a longer tube to add to it.
-
Date: Thu, Aug 28 2008 02:00:37
or instead of using a toothpick, you could sand down the tube and stick a hgg ink tube over for easy lead installation. make sure you stick the inktube in as far as you can. i think it would also stick better for the hgg back cap
-
Date: Thu, Aug 28 2008 02:07:31
How about TAPE
-
Date: Thu, Aug 28 2008 03:33:36
Tape works its just very tight in that barrel as it is. I stay away from tape just so the mechanism is as smooth as possible.
-
Date: Sat, Aug 30 2008 02:20:23
could u superglue the g2 tip to the rsvp? and i dont see how u could connect the lead tubes with a toothpick... how do u put in lead then
-
Date: Sat, Aug 30 2008 02:22:26
Thats why i said you can use tape it won't efect clicking
-
Date: Sat, Aug 30 2008 02:25:12
use like electrical tape or something. try to stay away from any type of tape that's transarent. maybe duct?
-
Date: Sat, Aug 30 2008 02:30:05
Why?
-
Date: Sat, Aug 30 2008 16:58:19QUOTE (Mr.Squekers @ Aug 29 2008, 09:30 PM) <{POST_SNAPBACK}>Why?
if u use like scotch tape the front will come off when u click. like it will slide up . -
Date: Sat, Aug 30 2008 20:53:30
Electrical tape and duct tape dont work well. After a while they become tacky and will slide worse. I used packing clear tape. Its thin and holds well enough.
-
Date: Tue, Sep 2 2008 01:28:04
when i put in the g2 mp tube, it wont fit thru the hole, so i sand down the part where it widens?
-
Date: Tue, Sep 2 2008 01:54:31
your suposed to drill out the inside of the rsvp
-
Date: Tue, Sep 2 2008 01:58:42QUOTE (Adam_ADD @ Sep 1 2008, 06:54 PM) <{POST_SNAPBACK}>your suposed to drill out the inside of the rsvp
makes a lot MORE sense, and for the lead tube of the shaky pencil, theres a lil spring there... do i take it out? or do i just leave it there...or is there a great sub o.o
-
Date: Tue, Sep 2 2008 02:08:48
idk what your exactly talking about.
-
Date: Tue, Sep 2 2008 02:26:51QUOTE (Adam_ADD @ Sep 1 2008, 07:08 PM) <{POST_SNAPBACK}>idk what your exactly talking about.
nvm, do u have to use the shaky pencil's lead tube?
-
Date: Tue, Sep 2 2008 02:38:06QUOTE (Ramen @ Sep 1 2008, 07:26 PM) <{POST_SNAPBACK}>nvm, do u have to use the shaky pencil's lead tube?
no >_______<, any tube thats the same diameter will work, like an rsvp inktube -
Date: Wed, Sep 3 2008 03:03:50QUOTE (Sankaku @ Sep 1 2008, 07:38 PM) <{POST_SNAPBACK}>no >_______<, any tube thats the same diameter will work, like an rsvp inktube
can some1 post the length of the real lead tube mechanism? or adam can post meausrements
-
Date: Wed, Sep 3 2008 13:10:29
the lead tube is a guess and test cut because of how far you shove the hgg plug into the cap.
-
Date: Thu, Sep 4 2008 02:54:11QUOTE (Adam_ADD @ Sep 3 2008, 06:10 AM) <{POST_SNAPBACK}>the lead tube is a guess and test cut because of how far you shove the hgg plug into the cap.
lets say all the way? or like how u did it. -
Date: Thu, Sep 4 2008 03:53:50QUOTE (Ramen @ Sep 3 2008, 07:54 PM) <{POST_SNAPBACK}>lets say all the way? or like how u did it.
just leave it long and slowly trim it down -
Date: Fri, Sep 5 2008 02:45:36
ohhhhhhh crap... g2 mini mp tip is diff then g2 reg mp tip...
-
Date: Fri, Sep 5 2008 03:43:43
good info. then i will NOT be getting those this weekend. wait diff in what ways?
-
Date: Sun, Sep 7 2008 00:49:25
i was looking at them today i dont think they are different at all. super grips(used in ballsign mods) work as well.
-
Date: Sun, Sep 7 2008 03:35:35
oh ok. ya i thought supergrips were the same as G2 mp just clear gripped?
-
Date: Sun, Sep 7 2008 18:54:37
no cuz like the mini g2 mp is thicker while the reg g2 mp tip is more thinner... noticed 1 of my friends had it and it was diff then mini g2 tip.
EDIT: Fixed
EDIT2: and what do u mean shave off the 2 ridges off backcap. -
Date: Mon, Sep 8 2008 08:17:16
step 4. sand down the g2 tip so that the hgg tip fits over top the pencil point should be right at the end and sand down the outter rim of the screw threads so its flush with the body.
I don't understand this. can someone help explain please?
I still don't get it with the picture.
Thanks. -
Date: Tue, Sep 9 2008 01:27:58QUOTE (Glamouraz @ Sep 8 2008, 01:17 AM) <{POST_SNAPBACK}>step 4. sand down the g2 tip so that the hgg tip fits over top the pencil point should be right at the end and sand down the outter rim of the screw threads so its flush with the body.
I don't understand this. can someone help explain please?
I still don't get it with the picture.
Thanks.
means like sand down the g2 tip so the hgg tip well most of the hgg tip fits entirley over g2 tip.
-
Date: Tue, Sep 9 2008 01:43:50
Oh cool. thanks. But if i file it too thin, won't it break if I drop it tip down?
Yea, i know, stupid question. Not being a critic but I wanna make sure. Thanks. -
Date: Tue, Sep 9 2008 02:33:50
just be careful i only filed one down too far
-
Date: Tue, Sep 9 2008 16:42:07
Cool thanks.
I don't understand: File the 2 ridges off the RSVP backcap.
What ridges? The ones that hold the rsvp inktube in place? -
Date: Tue, Sep 9 2008 17:54:30
there are two ridges on the outside of the rsvp back cap those have to be taken off so the cap can go down and not get stuck.
-
Date: Tue, Sep 9 2008 19:52:57QUOTE (Glamouraz @ Sep 9 2008, 11:42 AM) <{POST_SNAPBACK}>Cool thanks.
I don't understand: File the 2 ridges off the RSVP backcap.
What ridges? The ones that hold the rsvp inktube in place?
I basically just sanded the whole outer part of the rsvp backcap it could just slide freely through the rsvp cap. -
Date: Wed, Sep 10 2008 02:01:42QUOTEstep 3. cut the g2(it should be shorter in the end adjust it according to the rsvp cut)
So.. how much of it do we cut?
Shorter at the end?
What end? Shorter?QUOTEthere are two ridges on the outside of the rsvp back cap those have to be taken off so the cap can go down and not get stuck.
Oh, you mean the very fine ones? I hardly noticed them lol. They're the ones on each half of the backcap right?
And how much of the RSVP body do we cut?
Help me please. Thanks. -
Date: Wed, Sep 10 2008 19:48:06
yeah those if those dont come off the cap wont click right it would get stuck.
the front end of the rsvp should have about 1.5 cm left -
Date: Wed, Sep 10 2008 20:59:03
ok so when i click the mp thing, the shaky mechanism doesnt like work... it doesnt push all the way through the g2 tip. when i keep on pushing the shaky tube, the lead tube starts to pop out. if this isnt making any sense, i can put a pic if u want.
-
Date: Wed, Sep 10 2008 22:28:18
your not suposed to use the shaker mech. the shaker lead tube is just to extend the g2 mp lead tube
-
Date: Wed, Sep 10 2008 23:54:20
ehhh. nvm
i already figured out how o.O when u connect the 2 lead tubes. just put a lot of tape to connect it, just enough to go in the hole, and just enough not go go IN the shaky tube, not outside. then u can click the mech ... but i broke my g2 tip because when i was sanding it down it craxed. now i need to gets another 1 T.t -
Date: Thu, Sep 11 2008 05:22:52
where's the spring to make the mech retract? Or can the mech retract by itself already?
How much of the G2 barrel do we cut?
Can you update your first post with the extra info?
Thanks! -
Date: Thu, Sep 11 2008 10:27:04
what are you talking about this is an mechanical pencil not a retractable
-
Date: Thu, Sep 11 2008 12:21:32
As in, the clicker.
-
Date: Thu, Sep 11 2008 20:01:20
the back end with the rsvp will pop back into place after you click it.
-
Date: Fri, Sep 12 2008 02:59:03
has anyone made an nx mmt version of this yet? anything specific to keep in mind to make it mmt'ed? thanks
-
Date: Sat, Sep 13 2008 00:11:09QUOTE (Adam_ADD @ Sep 11 2008, 01:01 PM) <{POST_SNAPBACK}>the back end with the rsvp will pop back into place after you click it.
dude whats the shaky tube for....
-
Date: Sat, Sep 13 2008 01:10:18
its to lengthen the g2 mechanical pencil tube thats it. it can be subbed with any similar tube. even an rsvp ink tube.
-
Date: Sat, Sep 13 2008 03:01:58
Ok cool.
How come your RSVP Backcap looks different?
there's this thing around the sides. What did you do to it? -
Date: Sun, Sep 14 2008 23:57:47
why did u sand the outer part of rsvp backcap.
-
Date: Mon, Sep 15 2008 02:20:10
So that the rsvp cap can go over it smoothly.
-
Date: Thu, Sep 18 2008 06:01:03
Cool. Anyway, I'm gonna make the mod when I get enough money to get the pencils.
Just a question. Does the lead break easily when you drop it? -
Date: Thu, Sep 18 2008 12:38:33
nope the lead doesnt break if you make it right.
-
Date: Thu, Sep 18 2008 19:07:47
is there a sub? for the mech pencil?
-
Date: Thu, Sep 18 2008 23:13:23
the only sub is supergrips used in making ballsigns mods
-
Date: Fri, Sep 19 2008 04:26:40QUOTE (iamk34n3 @ Sep 14 2008, 07:20 PM) <{POST_SNAPBACK}>So that the rsvp cap can go over it smoothly.
y would u do that -
Date: Fri, Sep 19 2008 05:08:49
So the cap doesn't jam when you click down. If you treat it as a regular mechanical pencil, it's like trying to write while holding down the clicker in the back.
-
Date: Fri, Sep 19 2008 05:18:36
Can i use a signo tip at the front so that the COG is more towards the front or do i have to stick with a HGG tip?
-
Date: Fri, Sep 19 2008 06:14:54
I'm sure if you sanded the G2 MP tip differently, you could get a signo tip to fit on it.
-
Date: Mon, Sep 22 2008 01:34:44
what do u use to click lead out, shaky tube or lead tube?!
-
Date: Mon, Sep 22 2008 01:36:02
The G2 MP isn't a shaker.
Edit: How many problems are you having with this mod? It seems like every other post is yours. -___- -
Date: Mon, Sep 22 2008 01:36:38
yes i know but what does u use to push lead out?
-
Date: Mon, Sep 22 2008 01:37:17
You push the rsvp cap down, which in turn pushes down the mp tube.
-
Date: Mon, Sep 22 2008 01:39:14
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
o
ooooooooooooooooooooooooooooooooooooooooooooooooh........ tahts why u wanna sand- i get it big help
---------------------------------------------------------
do u have any faster way to sand g2 tip down? -
Date: Mon, Sep 29 2008 01:16:52
You want to control your sanding because if you sand something too much, theres no turning back. But to answer your question, you could probably use some kind of power sander.
-
Date: Mon, Sep 29 2008 01:20:48
no cuz like 2 times now the g2 tip broke in half because of sanding...
-
Date: Wed, Oct 22 2008 00:55:42
Lol there are a few pages of dedicated question that Ramen and Glamouraz asked. I would like to say that u could try to super glue the extending tube with the g2 tube. After that you can just use some really strong tape to keep it all together.
One question though... i've been told that the med point has a larger diameter then fine pt but I can't tell the difference, is it true though? -
Date: Wed, Oct 22 2008 00:59:31
I'm nto sure if I posted this yet, and I'm too lazy to check,
but do you guys know that you can also use a Pentel Icy or Pentel Champ for the MP mech?
You just have to cut the barrela little at a time and make sure you don't cut though the lead tube, but it works perfectly
No sanding required, the HGG tip fits right on like it were a normal RSVP. -
Date: Wed, Oct 22 2008 04:11:26
which icy cuz thats what im doin right nao
-
Date: Wed, Oct 22 2008 04:14:08
It looks just like this.
http://www.promo-pen.com/pencils/Pentel%20...le%20Pencil.jpg -
Date: Wed, Oct 22 2008 04:17:22
eww not that 1
i haev another 1.
http://www.business-supply.com/product_ima...limeter-red.gif -
Date: Wed, Oct 22 2008 04:19:39
Those work too as far as I'm concerned.
-
Date: Wed, Oct 22 2008 04:36:11
Yeah, but it makes the pen front-end heavy like the MSP does.
-
Date: Wed, Oct 22 2008 04:50:22
Hmm.
The Icy that I used made the pen more back heavy than a regular MX. I had to compensate with a signo tip. -
Date: Thu, Oct 23 2008 02:03:46
Yeah its good but don't you want it do be front heavy? cause the MX is already back heavy.
And I don't know about boring through the RSBP barrel but my MP lead tube fits right into the hole in the barrel. -
Date: Tue, Oct 28 2008 12:13:21
i cant seem to get the g2 and rsvp tgth.
totally fked up.
need some help here
my packaging tape is almost finishing due to this fking mod-.- -
Date: Tue, Oct 28 2008 12:22:10
use other tape..
or chlorofoam. -
Date: Sun, Dec 21 2008 14:08:08
just wondering
if i used a rsvp MINI for this
would i still need the extra inktube at the back? -
Date: Sun, Dec 21 2008 23:57:00
To make a Mini mp mx? you probably wont have to if you use a normal sized g2 mp.
-
Date: Mon, Dec 22 2008 00:24:05
So the only reason it should be an RSVP med, is so the inktube can fit in the front barrel?
-
Date: Mon, Dec 22 2008 01:27:58QUOTE (Adam_ADD @ Dec 22 2008, 07:57 AM) <{POST_SNAPBACK}>To make a Mini mp mx? you probably wont have to if you use a normal sized g2 mp.
using a normal sized supergrip, i wouldnt need to right?
btw some questions, do i jam the hgg backplug all the way in, like really all the way in or? -
Date: Mon, Dec 22 2008 13:44:10
and super grips are the same as g2 mps
as far as it can go in it depends on how you put the rsvp grip in. mine usually end up right around the ring on the grip. -
Date: Mon, Dec 22 2008 14:01:36QUOTE (Adam_ADD @ Dec 22 2008, 09:44 PM) <{POST_SNAPBACK}>and super grips are the same as g2 mps
as far as it can go in it depends on how you put the rsvp grip in. mine usually end up right around the ring on the grip.
i made mine today, thanks so much!
i damaged the supergrip abit tho, it ruined the mod. but ima replace it tmr -
Date: Sun, Jan 4 2009 02:17:17QUOTE (Noober @ Jul 25 2008, 07:23 PM) <{POST_SNAPBACK}>Are there any other mechanical pencils that this could work with?
i just made it with the Z - grip its a little tricky though -
Date: Mon, Jan 5 2009 06:04:07
The one i made looks veru fragile.. like it could break anytime.
I dropped it a few times by accident and nothing happened but I don't want to push it too far. The lead doesnt break it the tube too.
Does any of yours look fragile? -
Date: Mon, Jan 5 2009 11:53:06
looks fragile. all ive noticed is that the grip aera shakes pretty much. but other than that it isnt really fragile.